[v3] gdbserver: Fix crash when QTinit is handled with no inferior process attached
Commit Message
On 02/06/2015 10:50 AM, Pedro Alves wrote:
> On 02/05/2015 08:06 PM, Antoine Tremblay wrote:
>> When gdbserver is called with --multi and attach has not been called yet
>> and tstart is called on the gdb client, gdbserver would crash.
>> This patch fixes gdbserver so that it returns E01 to the gdb client.
>>
>> Also this patch adds a testcase to verify this bug named no-attach-trace.exp
> Thanks! Pretty good. Just a few minor nits. Just the usual formatting
> details that are easy to miss the first time around.
np
>> gdb/ChangeLog:
>> PR gdb/15956
>> * gdb/gdbserver/tracepoint.c (cmd_qtinit): Added check for
>> current_thread.
> gdbserver has it's own ChangeLog file, gdb/gdbserver/ChangeLog.
> Then adjust the entry to read "* gdbserver/tracepoint.c", as entries
> are relative to the ChangeLog file's path.
>
> Also, s/Added/Add/.
Done.
>> gdb/testsuite/ChangeLog:
>> * gdb.trace/no-attach-trace.c: New file.
>> * gdb.trace/no-attach-trace.exp: New file.
>> ---
>> gdb/gdbserver/tracepoint.c | 7 +++++
>> gdb/testsuite/gdb.trace/Makefile.in | 4 +--
>> gdb/testsuite/gdb.trace/no-attach-trace.c | 25 ++++++++++++++++
>> gdb/testsuite/gdb.trace/no-attach-trace.exp | 43 +++++++++++++++++++++++++++
>> 4 files changed, 77 insertions(+), 2 deletions(-)
>> create mode 100644 gdb/testsuite/gdb.trace/no-attach-trace.c
>> create mode 100644 gdb/testsuite/gdb.trace/no-attach-trace.exp
>>
>> diff --git a/gdb/gdbserver/tracepoint.c b/gdb/gdbserver/tracepoint.c
>> index 82d6ce5..0518530 100644
>> --- a/gdb/gdbserver/tracepoint.c
>> +++ b/gdb/gdbserver/tracepoint.c
>> @@ -2377,6 +2377,13 @@ cmd_qtinit (char *packet)
>> {
>> struct trace_state_variable *tsv, *prev, *next;
>>
>> + /* Can't do this command without a pid attached */
> Period and double-space at end of all sentences:
>
> /* Can't do this command without a pid attached. */
>
Done
>> + if (current_thread == NULL)
>> + {
>> + write_enn(packet);
> Space before parens:
>
> write_enn (packet);
Done
>
>
>> + return;
>> + }
>> +
>> /* Make sure we don't try to read from a trace frame. */
>> current_traceframe = -1;
>>
>> diff --git a/gdb/testsuite/gdb.trace/Makefile.in b/gdb/testsuite/gdb.trace/Makefile.in
>> index 2e23223..514beab 100644
>> --- a/gdb/testsuite/gdb.trace/Makefile.in
>> +++ b/gdb/testsuite/gdb.trace/Makefile.in
>> @@ -4,8 +4,8 @@ srcdir = @srcdir@
>> .PHONY: all clean mostlyclean distclean realclean
>>
>> PROGS = actions-changed ax backtrace deltrace disconnected-tracing \
>> - infotrace packetlen passc-dyn passcount report save-trace tfile \
>> - tfind tracecmd tsv unavailable while-dyn while-stepping
>> + infotrace no-attach-trace packetlen passc-dyn passcount report \
>> + save-trace tfile tfind tracecmd tsv unavailable while-dyn while-stepping
>>
>> all info install-info dvi install uninstall installcheck check:
>> @echo "Nothing to be done for $@..."
>> diff --git a/gdb/testsuite/gdb.trace/no-attach-trace.c b/gdb/testsuite/gdb.trace/no-attach-trace.c
>> new file mode 100644
>> index 0000000..383e6d0
>> --- /dev/null
>> +++ b/gdb/testsuite/gdb.trace/no-attach-trace.c
>> @@ -0,0 +1,25 @@
>> +/* This testcase is part of GDB, the GNU debugger.
>> +
>> + Copyright 2015 Free Software Foundation, Inc.
>> +
>> + This program is free software; you can redistribute it and/or modify
>> + it under the terms of the GNU General Public License as published by
>> + the Free Software Foundation; either version 3 of the License, or
>> + (at your option) any later version.
>> +
>> + This program is distributed in the hope that it will be useful,
>> + but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + GNU General Public License for more details.
>> +
>> + You should have received a copy of the GNU General Public License
>> + along with this program. If not, see <http://www.gnu.org/licenses/>. */
>> +
>> +/* This program is intended to be a simple dummy program for gdb to read */
> Period, double-space.
Done
>> +
>> +#include <unistd.h>
>> +
>> +int main ()
> Break before function name, and "(void)":
>
> int
> main (void)
>
Done
>> +{
>> + return 0;
>> +}
>> diff --git a/gdb/testsuite/gdb.trace/no-attach-trace.exp b/gdb/testsuite/gdb.trace/no-attach-trace.exp
>> new file mode 100644
>> index 0000000..2470347
>> --- /dev/null
>> +++ b/gdb/testsuite/gdb.trace/no-attach-trace.exp
>> @@ -0,0 +1,43 @@
>> +# This testcase is part of GDB, the GNU debugger.
>> +
>> +# Copyright 2015 Free Software Foundation, Inc.
>> +
>> +# This program is free software; you can redistribute it and/or modify
>> +# it under the terms of the GNU General Public License as published by
>> +# the Free Software Foundation; either version 3 of the License, or
>> +# (at your option) any later version.
>> +#
>> +# This program is distributed in the hope that it will be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program. If not, see <http://www.gnu.org/licenses/>.
>> +
>> +# Test that trying to trace without a program attached fails properly.
>> +
>> +load_lib trace-support.exp
>> +
>> +standard_testfile
>> +
>> +if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
>> + return -1
>> +}
>> +
>> +if ![runto_main] {
>> + fail "Can't run to main to check for trace support"
>> + return -1
>> +}
>> +
>> +if { ![gdb_target_supports_trace] } then {
>> + unsupported "Current target does not support trace"
>> + return 1
>> +
>> +}
>> +
>> +#clean test state so that we have no process attached
> Space after #, Uppercase, period at end:
>
> # Clean test state so that we have no process attached.
Done
>> +clean_restart $testfile
>> +
>> +gdb_test "trace main" "Tracepoint.*"
> Let's expand this a bit more, like in other tests:
>
> gdb_test "trace main" \
> "Tracepoint \[0-9\] at.* file .*$srcfile, line.*" \
> "set tracepoint on main"
Ok , done.
> Basically, reasonably avoid false positives.
>
>> +gdb_test "tstart" "Target returns error code '01'\."
> Targets can send other error codes, so I think it'd be
> prudent to .* the '01' part, like:
>
> gdb_test "tstart" "Target returns error code.*\."
Ok, done.
> Can you also after this run to main? That'd make sure that the
> target didn't crash or get wedged. If you decide to use
> runto_main, wrap it in
>
> with_test_prefix "after tstart" {
> ...
> }
Ho ok nice one :)
>
> to make its potential FAIL test message distinguishable from
> the runto_main at the top.
>
> Thanks,
> Pedro Alves
Thanks,
Updated patch follows :
Subject: [PATCH v3] gdbserver: Fix crash when QTinit is handled with no
inferior
process attached
When gdbserver is called with --multi and attach has not been called yet
and tstart is called on the gdb client, gdbserver would crash.
This patch fixes gdbserver so that it returns E01 to the gdb client.
Also this patch adds a testcase to verify this bug named no-attach-trace.exp
gdb/gdbserver/ChangeLog:
PR breakpoints/15956
* tracepoint.c (cmd_qtinit): Add check for current_thread.
gdb/testsuite/ChangeLog:
* gdb.trace/no-attach-trace.c: New file.
* gdb.trace/no-attach-trace.exp: New file.
---
gdb/gdbserver/tracepoint.c | 7 ++++
gdb/testsuite/gdb.trace/Makefile.in | 4 +-
gdb/testsuite/gdb.trace/no-attach-trace.c | 26 +++++++++++++
gdb/testsuite/gdb.trace/no-attach-trace.exp | 53
+++++++++++++++++++++++++++
4 files changed, 88 insertions(+), 2 deletions(-)
create mode 100644 gdb/testsuite/gdb.trace/no-attach-trace.c
create mode 100644 gdb/testsuite/gdb.trace/no-attach-trace.exp
Comments
On 02/06/2015 04:25 PM, Antoine Tremblay wrote:
> Subject: [PATCH v3] gdbserver: Fix crash when QTinit is handled with no
> inferior
This is OK.
Thanks,
Pedro Alves
On 02/06/2015 12:11 PM, Pedro Alves wrote:
> On 02/06/2015 04:25 PM, Antoine Tremblay wrote:
>
>> Subject: [PATCH v3] gdbserver: Fix crash when QTinit is handled with no
>> inferior
> This is OK.
>
> Thanks,
> Pedro Alves
Good :)
Could you help me to get an write access account so I can push it ?
I'm not quite sure how to proceed..
Regards,
Antoine Tremblay
Hi Antoine,
On 02/06/2015 05:36 PM, Antoine Tremblay wrote:
> Could you help me to get an write access account so I can push it ?
> I'm not quite sure how to proceed..
Follow the instruction here: https://sourceware.org/cgi-bin/pdw/ps_form.cgi
List me as sponsor.
Once you have access, add yourself to the "Write After Approval"
list in the gdb/MAINTAINERS file, push that patch in (no need to wait for
approval), and post it to the list.
Welcome. :-)
Thanks,
Pedro Alves
@@ -2377,6 +2377,13 @@ cmd_qtinit (char *packet)
{
struct trace_state_variable *tsv, *prev, *next;
+ /* Can't do this command without a pid attached. */
+ if (current_thread == NULL)
+ {
+ write_enn (packet);
+ return;
+ }
+
/* Make sure we don't try to read from a trace frame. */
current_traceframe = -1;
b/gdb/testsuite/gdb.trace/Makefile.in
@@ -4,8 +4,8 @@ srcdir = @srcdir@
.PHONY: all clean mostlyclean distclean realclean
PROGS = actions-changed ax backtrace deltrace disconnected-tracing \
- infotrace packetlen passc-dyn passcount report save-trace tfile \
- tfind tracecmd tsv unavailable while-dyn while-stepping
+ infotrace no-attach-trace packetlen passc-dyn passcount report \
+ save-trace tfile tfind tracecmd tsv unavailable while-dyn
while-stepping
all info install-info dvi install uninstall installcheck check:
@echo "Nothing to be done for $@..."
b/gdb/testsuite/gdb.trace/no-attach-trace.c
new file mode 100644
@@ -0,0 +1,26 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2015 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see
<http://www.gnu.org/licenses/>. */
+
+/* This program is intended to be a simple dummy program for gdb to
read. */
+
+#include <unistd.h>
+
+int
+main (void)
+{
+ return 0;
+}
b/gdb/testsuite/gdb.trace/no-attach-trace.exp
new file mode 100644
@@ -0,0 +1,53 @@
+# This testcase is part of GDB, the GNU debugger.
+
+# Copyright 2015 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Test that trying to trace without a program attached fails properly.
+
+load_lib trace-support.exp
+
+standard_testfile
+
+if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
+ return -1
+}
+
+if ![runto_main] {
+ fail "Can't run to main to check for trace support"
+ return -1
+}
+
+if { ![gdb_target_supports_trace] } then {
+ unsupported "Current target does not support trace"
+ return 1
+
+}
+
+# Clean test state so that we have no process attached.
+clean_restart $testfile
+
+gdb_test "trace main" \
+ "Tracepoint \[0-9\] at.* file .*$srcfile, line.*" \
+ "set tracepoint on main"
+
+gdb_test "tstart" "Target returns error code.*\."
+
+with_test_prefix "after tstart" {
+ if ![runto_main] {
+ fail "Can't run to main, target may have died unexpectedly"
+ return -1
+ }
+}