diff mbox

[2/2] sim/cris: Fix references to cgen cpu directory

Message ID 812b9a92f4412fcb6fd4728f85c4fe6a367ab0b4.1541525137.git.andrew.burgess@embecosm.com
State New
Headers show

Commit Message

Andrew Burgess Nov. 6, 2018, 5:35 p.m. UTC
Don't assume that cgen is located within the binutils-gdb tree.  We
already have CGEN_CPU_DIR and CPU_DIR defined, these are the cpu/
directory within cgen, and the cpu/ directory within binutils-cpu.

The cris target tries to find CPU_DIR relative to the cgen source
tree, which can be wrong when building with an out of tree cgen.

sim/cris/ChangeLog:

	* Makefile.in: Replace uses of CGEN_CPU_DIR with CPU_DIR, and
	remove the definition of CGEN_CPU_DIR.
---
 sim/cris/ChangeLog   |  5 +++++
 sim/cris/Makefile.in | 18 ++++++++----------
 2 files changed, 13 insertions(+), 10 deletions(-)

Comments

Tom Tromey Nov. 30, 2018, 7:51 p.m. UTC | #1
>>>>> "Andrew" == Andrew Burgess <andrew.burgess@embecosm.com> writes:

Andrew> sim/cris/ChangeLog:

Andrew> 	* Makefile.in: Replace uses of CGEN_CPU_DIR with CPU_DIR, and
Andrew> 	remove the definition of CGEN_CPU_DIR.

I think this is ok.  Thanks.

Tom
diff mbox

Patch

diff --git a/sim/cris/Makefile.in b/sim/cris/Makefile.in
index 2c901fdcab..f5880eaf29 100644
--- a/sim/cris/Makefile.in
+++ b/sim/cris/Makefile.in
@@ -45,8 +45,6 @@  NL_TARGET = -DNL_TARGET_cris
 
 ## COMMON_POST_CONFIG_FRAG
 
-CGEN_CPU_DIR = $(CGENDIR)/../cpu
-
 arch = cris
 
 sim-if.o: sim-if.c $(SIM_MAIN_DEPS) $(sim-core_h) $(sim-options_h)
@@ -140,17 +138,17 @@  CGEN_MAINT = ; @true
 # Useful when making CGEN-generated files manually, without --enable-cgen-maint.
 stamps: stamp-v10fmloop stamp-v32fmloop stamp-arch stamp-v10fcpu stamp-v32fcpu stamp-desc
 
-stamp-arch: $(CGEN_READ_SCM) $(CGEN_ARCH_SCM) $(CGEN_CPU_DIR)/cris.cpu Makefile
+stamp-arch: $(CGEN_READ_SCM) $(CGEN_ARCH_SCM) $(CPU_DIR)/cris.cpu Makefile
 	$(MAKE) cgen-arch $(CGEN_FLAGS_TO_PASS) mach=crisv10,crisv32 \
-	  archfile=$(CGEN_CPU_DIR)/cris.cpu \
+	  archfile=$(CPU_DIR)/cris.cpu \
 	  FLAGS="with-scache with-profile=fn"
 	touch stamp-arch
 arch.h arch.c cpuall.h: $(CGEN_MAINT) stamp-arch
 
 # The sed-hack is supposed to be temporary, until we get CGEN to emit it.
-stamp-v10fcpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(CGEN_CPU_DIR)/cris.cpu Makefile
+stamp-v10fcpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(CPU_DIR)/cris.cpu Makefile
 	$(MAKE) cgen-cpu-decode $(CGEN_FLAGS_TO_PASS) \
-	  archfile=$(CGEN_CPU_DIR)/cris.cpu \
+	  archfile=$(CPU_DIR)/cris.cpu \
 	  cpu=crisv10f mach=crisv10 SUFFIX=v10 FLAGS="with-scache with-profile=fn" EXTRAFILES="$(CGEN_CPU_SEMSW)"
 	$(SHELL) $(srcroot)/move-if-change $(srcdir)/semv10-switch.c $(srcdir)/semcrisv10f-switch.c
 	sed -ne 'p; s/^\(#include "sim-assert.h"\)$$/#include "cgen-ops.h"/p' < $(srcdir)/decodev10.c > decodev10.c.tmp
@@ -158,9 +156,9 @@  stamp-v10fcpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(CGEN_CPU_DI
 	touch stamp-v10fcpu
 cpuv10.h cpuv10.c semcrisv10f-switch.c modelv10.c decodev10.c decodev10.h: $(CGEN_MAINT) stamp-v10fcpu
 
-stamp-v32fcpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(CGEN_CPU_DIR)/cris.cpu Makefile
+stamp-v32fcpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(CPU_DIR)/cris.cpu Makefile
 	$(MAKE) cgen-cpu-decode $(CGEN_FLAGS_TO_PASS) \
-	  archfile=$(CGEN_CPU_DIR)/cris.cpu \
+	  archfile=$(CPU_DIR)/cris.cpu \
 	  cpu=crisv32f mach=crisv32 SUFFIX=v32 FLAGS="with-scache with-profile=fn" EXTRAFILES="$(CGEN_CPU_SEMSW)"
 	$(SHELL) $(srcroot)/move-if-change $(srcdir)/semv32-switch.c $(srcdir)/semcrisv32f-switch.c
 	sed -ne 'p; s/^\(#include "sim-assert.h"\)$$/#include "cgen-ops.h"/p' < $(srcdir)/decodev32.c > decodev32.c.tmp
@@ -168,9 +166,9 @@  stamp-v32fcpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(CGEN_CPU_DI
 	touch stamp-v32fcpu
 cpuv32.h cpuv32.c semcrisv32f-switch.c modelv32.c decodev32.c decodev32.h: $(CGEN_MAINT) stamp-v32fcpu
 
-stamp-desc: $(CGEN_READ_SCM) $(CGEN_DESC_SCM) $(CGEN_CPU_DIR)/cris.cpu Makefile
+stamp-desc: $(CGEN_READ_SCM) $(CGEN_DESC_SCM) $(CPU_DIR)/cris.cpu Makefile
 	$(MAKE) cgen-desc $(CGEN_FLAGS_TO_PASS) \
-		archfile=$(CGEN_CPU_DIR)/cris.cpu \
+		archfile=$(CPU_DIR)/cris.cpu \
 		cpu=cris mach=all
 	touch stamp-desc
 cris-desc.c cris-desc.h cris-opc.h: $(CGEN_MAINT) stamp-desc