@@ -921,7 +921,7 @@ psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \
amd64-darwin-tdep.h charset-list.h \
config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \
dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
-i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
+i386-darwin-tdep.h x86-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
osdata.h procfs.h python/py-event.h python/py-events.h python/py-stopevent.h \
python/python-internal.h python/python.h ravenscar-thread.h record.h \
record-full.h solib-aix.h \
@@ -935,7 +935,7 @@ nat/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h nat/linux-btrace.h \
ctf.h nat/i386-cpuid.h nat/i386-gcc-cpuid.h target/resume.h \
target/wait.h target/waitstatus.h nat/linux-nat.h nat/linux-waitpid.h \
-common/print-utils.h common/rsp-low.h nat/i386-dregs.h x86-linux-nat.h \
+common/print-utils.h common/rsp-low.h nat/x86-dregs.h x86-linux-nat.h \
i386-linux-nat.h common/common-defs.h common/errors.h common/common-types.h \
common/common-debug.h common/cleanups.h common/gdb_setjmp.h \
common/common-exceptions.h target/target.h target/symbol.h \
@@ -1637,7 +1637,7 @@ ALLDEPFILES = \
i387-tdep.c \
i386-darwin-tdep.c i386-darwin-nat.c \
i386-dicos-tdep.c \
- i386-linux-tdep.c i386-nat.c \
+ i386-linux-tdep.c x86-nat.c \
i386-sol2-nat.c i386-sol2-tdep.c \
i386gnu-nat.c i386gnu-tdep.c \
ia64-hpux-nat.c ia64-hpux-tdep.c \
@@ -2188,8 +2188,8 @@ waitstatus.o: ${srcdir}/target/waitstatus.c
# Need to explicitly specify the compile rule as make will do nothing
# or try to compile the object file into the sub-directory.
-i386-dregs.o: ${srcdir}/nat/i386-dregs.c
- $(COMPILE) $(srcdir)/nat/i386-dregs.c
+x86-dregs.o: ${srcdir}/nat/x86-dregs.c
+ $(COMPILE) $(srcdir)/nat/x86-dregs.c
$(POSTCOMPILE)
linux-btrace.o: ${srcdir}/nat/linux-btrace.c
@@ -17,7 +17,7 @@
#include "defs.h"
#include "windows-nat.h"
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "amd64-tdep.h"
#include <windows.h>
@@ -103,5 +103,5 @@ _initialize_amd64_windows_nat (void)
{
windows_set_context_register_offsets (mappings);
windows_set_segment_register_p (amd64_windows_segment_register_p);
- i386_set_debug_register_length (8);
+ x86_set_debug_register_length (8);
}
@@ -32,7 +32,7 @@
#include "amd64-tdep.h"
#include "amd64-nat.h"
#include "amd64bsd-nat.h"
-#include "i386-nat.h"
+#include "x86-nat.h"
/* Offset in `struct reg' where MEMBER is stored. */
@@ -145,7 +145,7 @@ static void
amd64fbsd_mourn_inferior (struct target_ops *ops)
{
#ifdef HAVE_PT_GETDBREGS
- i386_cleanup_dregs ();
+ x86_cleanup_dregs ();
#endif
super_mourn_inferior (ops);
}
@@ -167,14 +167,14 @@ _initialize_amd64fbsd_nat (void)
#ifdef HAVE_PT_GETDBREGS
- i386_use_watchpoints (t);
+ x86_use_watchpoints (t);
- i386_dr_low.set_control = amd64bsd_dr_set_control;
- i386_dr_low.set_addr = amd64bsd_dr_set_addr;
- i386_dr_low.get_addr = amd64bsd_dr_get_addr;
- i386_dr_low.get_status = amd64bsd_dr_get_status;
- i386_dr_low.get_control = amd64bsd_dr_get_control;
- i386_set_debug_register_length (8);
+ x86_dr_low.set_control = amd64bsd_dr_set_control;
+ x86_dr_low.set_addr = amd64bsd_dr_set_addr;
+ x86_dr_low.get_addr = amd64bsd_dr_get_addr;
+ x86_dr_low.get_status = amd64bsd_dr_get_status;
+ x86_dr_low.get_control = amd64bsd_dr_get_control;
+ x86_set_debug_register_length (8);
#endif /* HAVE_PT_GETDBREGS */
@@ -1,3 +1,3 @@
MH_CFLAGS=
-NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o i386-windows-nat.o
+NATDEPFILES= x86-nat.o x86-dregs.o windows-nat.o i386-windows-nat.o
XM_CLIBS=
@@ -17,4 +17,4 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>. */
-NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o amd64-windows-nat.o
+NATDEPFILES= x86-nat.o x86-dregs.o windows-nat.o amd64-windows-nat.o
@@ -1,4 +1,4 @@
# Host: IA86 running Darwin
NATDEPFILES = fork-child.o darwin-nat.o \
- i386-darwin-nat.o i386-nat.o i386-dregs.o amd64-nat.o darwin-nat-info.o
+ i386-darwin-nat.o x86-nat.o x86-dregs.o amd64-nat.o darwin-nat-info.o
@@ -1,6 +1,6 @@
# Host: FreeBSD/i386
NATDEPFILES= fork-child.o inf-ptrace.o \
- fbsd-nat.o i386-nat.o i386-dregs.o i386bsd-nat.o i386fbsd-nat.o \
+ fbsd-nat.o x86-nat.o x86-dregs.o i386bsd-nat.o i386fbsd-nat.o \
bsd-kvm.o
NAT_FILE= nm-fbsd.h
HAVE_NATIVE_GCORE_HOST = 1
@@ -1,7 +1,7 @@
# Host: FreeBSD/amd64
NATDEPFILES= fork-child.o inf-ptrace.o \
fbsd-nat.o amd64-nat.o amd64bsd-nat.o amd64fbsd-nat.o \
- bsd-kvm.o i386-nat.o i386-dregs.o
+ bsd-kvm.o x86-nat.o x86-dregs.o
HAVE_NATIVE_GCORE_HOST = 1
LOADLIBES= -lkvm
@@ -3,7 +3,7 @@
# We include several header files from config/djgpp
MH_CFLAGS= -I$(srcdir)/config/djgpp
-NATDEPFILES= go32-nat.o i386-nat.o i386-dregs.o
+NATDEPFILES= go32-nat.o x86-nat.o x86-dregs.o
HOST_IPC=
CC= gcc
@@ -2,7 +2,7 @@
NAT_FILE= config/nm-linux.h
NATDEPFILES= inf-ptrace.o fork-child.o \
- i386-nat.o i386-dregs.o i386-linux-nat.o x86-linux-nat.o \
+ x86-nat.o x86-dregs.o i386-linux-nat.o x86-linux-nat.o \
proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
linux-btrace.o linux-waitpid.o
@@ -1,6 +1,6 @@
# Host: GNU/Linux x86-64
NATDEPFILES= inf-ptrace.o fork-child.o \
- i386-nat.o i386-dregs.o amd64-nat.o amd64-linux-nat.o \
+ x86-nat.o x86-dregs.o amd64-nat.o amd64-linux-nat.o \
x86-linux-nat.o \
linux-nat.o linux-osdata.o \
proc-service.o linux-thread-db.o linux-fork.o \
@@ -1,3 +1,3 @@
MH_CFLAGS=
-NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o i386-windows-nat.o
+NATDEPFILES= x86-nat.o x86-dregs.o windows-nat.o i386-windows-nat.o
XM_CLIBS=
@@ -1 +1 @@
-NATDEPFILES= i386-nat.o i386-dregs.o windows-nat.o amd64-windows-nat.o
+NATDEPFILES= x86-nat.o x86-dregs.o windows-nat.o amd64-windows-nat.o
@@ -149,7 +149,7 @@ SFILES= $(srcdir)/gdbreplay.c $(srcdir)/inferiors.c $(srcdir)/dll.c \
$(srcdir)/thread-db.c $(srcdir)/utils.c $(srcdir)/debug.c \
$(srcdir)/linux-arm-low.c $(srcdir)/linux-bfin-low.c \
$(srcdir)/linux-cris-low.c $(srcdir)/linux-crisv32-low.c \
- ${srcdir}/i386-low.c $(srcdir)/i387-fp.c \
+ ${srcdir}/x86-low.c $(srcdir)/i387-fp.c \
$(srcdir)/linux-ia64-low.c $(srcdir)/linux-low.c \
$(srcdir)/linux-m32r-low.c \
$(srcdir)/linux-m68k-low.c $(srcdir)/linux-mips-low.c \
@@ -558,7 +558,7 @@ waitstatus.o: ../target/waitstatus.c
# Native object files rules from ../nat
-i386-dregs.o: ../nat/i386-dregs.c
+x86-dregs.o: ../nat/x86-dregs.c
$(COMPILE) $<
$(POSTCOMPILE)
linux-btrace.o: ../nat/linux-btrace.c
@@ -99,7 +99,7 @@ case "${target}" in
srv_linux_thread_db=yes
;;
i[34567]86-*-cygwin*) srv_regobj="$srv_i386_regobj"
- srv_tgtobj="i386-low.o i386-dregs.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="x86-low.o x86-dregs.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles"
;;
i[34567]86-*-linux*) srv_regobj="$srv_i386_linux_regobj"
@@ -108,7 +108,7 @@ case "${target}" in
srv_regobj="$srv_regobj $srv_amd64_linux_regobj"
srv_xmlfiles="${srv_xmlfiles} $srv_amd64_linux_xmlfiles"
fi
- srv_tgtobj="$srv_linux_obj linux-x86-low.o i386-low.o i386-dregs.o i387-fp.o"
+ srv_tgtobj="$srv_linux_obj linux-x86-low.o x86-low.o x86-dregs.o i387-fp.o"
srv_tgtobj="${srv_tgtobj} linux-btrace.o"
srv_linux_usrregs=yes
srv_linux_regsets=yes
@@ -125,7 +125,7 @@ case "${target}" in
;;
i[34567]86-*-mingw32ce*)
srv_regobj="$srv_i386_regobj"
- srv_tgtobj="i386-low.o i386-dregs.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="x86-low.o x86-dregs.o win32-low.o win32-i386-low.o"
srv_tgtobj="${srv_tgtobj} wincecompat.o"
srv_xmlfiles="$srv_i386_xmlfiles"
# hostio_last_error implementation is in win32-low.c
@@ -134,7 +134,7 @@ case "${target}" in
srv_mingwce=yes
;;
i[34567]86-*-mingw*) srv_regobj="$srv_i386_regobj"
- srv_tgtobj="i386-low.o i386-dregs.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="x86-low.o x86-dregs.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles"
srv_mingw=yes
;;
@@ -315,7 +315,7 @@ case "${target}" in
srv_linux_thread_db=yes
;;
x86_64-*-linux*) srv_regobj="$srv_amd64_linux_regobj $srv_i386_linux_regobj"
- srv_tgtobj="$srv_linux_obj linux-x86-low.o i386-low.o i386-dregs.o i387-fp.o"
+ srv_tgtobj="$srv_linux_obj linux-x86-low.o x86-low.o x86-dregs.o i387-fp.o"
srv_tgtobj="${srv_tgtobj} linux-btrace.o"
srv_xmlfiles="$srv_i386_linux_xmlfiles $srv_amd64_linux_xmlfiles"
srv_linux_usrregs=yes # This is for i386 progs.
@@ -325,12 +325,12 @@ case "${target}" in
ipa_obj="${ipa_amd64_linux_regobj} linux-amd64-ipa.o"
;;
x86_64-*-mingw*) srv_regobj="$srv_amd64_regobj"
- srv_tgtobj="i386-low.o i386-dregs.o i387-fp.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="x86-low.o x86-dregs.o i387-fp.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles $srv_amd64_xmlfiles"
srv_mingw=yes
;;
x86_64-*-cygwin*) srv_regobj="$srv_amd64_regobj"
- srv_tgtobj="i386-low.o i386-dregs.o i387-fp.o win32-low.o win32-i386-low.o"
+ srv_tgtobj="x86-low.o x86-dregs.o i387-fp.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles"
;;
deleted file mode 100644
@@ -1,38 +0,0 @@
-/* Debug register code for the i386.
-
- Copyright (C) 2009-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include "server.h"
-#include "i386-low.h"
-
-/* Clear the reference counts and forget everything we knew about the
- debug registers. */
-
-void
-i386_low_init_dregs (struct i386_debug_reg_state *state)
-{
- int i;
-
- ALL_DEBUG_REGISTERS (i)
- {
- state->dr_mirror[i] = 0;
- state->dr_ref_count[i] = 0;
- }
- state->dr_control_mirror = 0;
- state->dr_status_mirror = 0;
-}
deleted file mode 100644
@@ -1,24 +0,0 @@
-/* Misc. low level support for i386.
-
- Copyright (C) 2009-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-
-#include "nat/i386-dregs.h"
-
-/* Initialize STATE. */
-extern void i386_low_init_dregs (struct i386_debug_reg_state *state);
@@ -23,7 +23,7 @@
#include <inttypes.h>
#include "linux-low.h"
#include "i387-fp.h"
-#include "i386-low.h"
+#include "x86-low.h"
#include "i386-xstate.h"
#include "gdb_proc_service.h"
@@ -148,7 +148,7 @@ static const char *xmltarget_amd64_linux_no_xml = "@<target>\
struct arch_process_info
{
- struct i386_debug_reg_state debug_reg_state;
+ struct x86_debug_reg_state debug_reg_state;
};
/* Per-thread arch-specific data we want to keep. */
@@ -587,7 +587,7 @@ update_debug_registers_callback (struct inferior_list_entry *entry,
/* Update the inferior's debug register REGNUM from STATE. */
static void
-i386_dr_low_set_addr (int regnum, CORE_ADDR addr)
+x86_dr_low_set_addr (int regnum, CORE_ADDR addr)
{
/* Only update the threads of this process. */
int pid = pid_of (current_inferior);
@@ -600,7 +600,7 @@ i386_dr_low_set_addr (int regnum, CORE_ADDR addr)
/* Return the inferior's debug register REGNUM. */
static CORE_ADDR
-i386_dr_low_get_addr (int regnum)
+x86_dr_low_get_addr (int regnum)
{
ptid_t ptid = ptid_of (current_inferior);
@@ -612,7 +612,7 @@ i386_dr_low_get_addr (int regnum)
/* Update the inferior's DR7 debug control register from STATE. */
static void
-i386_dr_low_set_control (unsigned long control)
+x86_dr_low_set_control (unsigned long control)
{
/* Only update the threads of this process. */
int pid = pid_of (current_inferior);
@@ -623,7 +623,7 @@ i386_dr_low_set_control (unsigned long control)
/* Return the inferior's DR7 debug control register. */
static unsigned long
-i386_dr_low_get_control (void)
+x86_dr_low_get_control (void)
{
ptid_t ptid = ptid_of (current_inferior);
@@ -634,7 +634,7 @@ i386_dr_low_get_control (void)
and record it in STATE. */
static unsigned long
-i386_dr_low_get_status (void)
+x86_dr_low_get_status (void)
{
ptid_t ptid = ptid_of (current_inferior);
@@ -642,13 +642,13 @@ i386_dr_low_get_status (void)
}
/* Low-level function vector. */
-struct i386_dr_low_type i386_dr_low =
+struct x86_dr_low_type x86_dr_low =
{
- i386_dr_low_set_control,
- i386_dr_low_set_addr,
- i386_dr_low_get_addr,
- i386_dr_low_get_status,
- i386_dr_low_get_control,
+ x86_dr_low_set_control,
+ x86_dr_low_set_addr,
+ x86_dr_low_get_addr,
+ x86_dr_low_get_status,
+ x86_dr_low_get_control,
sizeof (void *),
};
@@ -686,10 +686,10 @@ x86_insert_point (enum raw_bkpt_type type, CORE_ADDR addr,
{
enum target_hw_bp_type hw_type
= raw_bkpt_type_to_target_hw_bp_type (type);
- struct i386_debug_reg_state *state
+ struct x86_debug_reg_state *state
= &proc->private->arch_private->debug_reg_state;
- return i386_dr_insert_watchpoint (state, hw_type, addr, size);
+ return x86_dr_insert_watchpoint (state, hw_type, addr, size);
}
default:
@@ -715,10 +715,10 @@ x86_remove_point (enum raw_bkpt_type type, CORE_ADDR addr,
{
enum target_hw_bp_type hw_type
= raw_bkpt_type_to_target_hw_bp_type (type);
- struct i386_debug_reg_state *state
+ struct x86_debug_reg_state *state
= &proc->private->arch_private->debug_reg_state;
- return i386_dr_remove_watchpoint (state, hw_type, addr, size);
+ return x86_dr_remove_watchpoint (state, hw_type, addr, size);
}
default:
/* Unsupported. */
@@ -730,7 +730,7 @@ static int
x86_stopped_by_watchpoint (void)
{
struct process_info *proc = current_process ();
- return i386_dr_stopped_by_watchpoint (&proc->private->arch_private->debug_reg_state);
+ return x86_dr_stopped_by_watchpoint (&proc->private->arch_private->debug_reg_state);
}
static CORE_ADDR
@@ -738,8 +738,8 @@ x86_stopped_data_address (void)
{
struct process_info *proc = current_process ();
CORE_ADDR addr;
- if (i386_dr_stopped_data_address (&proc->private->arch_private->debug_reg_state,
- &addr))
+ if (x86_dr_stopped_data_address (&proc->private->arch_private->debug_reg_state,
+ &addr))
return addr;
return 0;
}
@@ -751,7 +751,7 @@ x86_linux_new_process (void)
{
struct arch_process_info *info = xcalloc (1, sizeof (*info));
- i386_low_init_dregs (&info->debug_reg_state);
+ x86_low_init_dregs (&info->debug_reg_state);
return info;
}
@@ -782,7 +782,7 @@ x86_linux_prepare_to_resume (struct lwp_info *lwp)
int i;
int pid = ptid_get_pid (ptid);
struct process_info *proc = find_process_pid (pid);
- struct i386_debug_reg_state *state
+ struct x86_debug_reg_state *state
= &proc->private->arch_private->debug_reg_state;
x86_linux_dr_set (ptid, DR_CONTROL, 0);
@@ -794,7 +794,7 @@ x86_linux_prepare_to_resume (struct lwp_info *lwp)
/* If we're setting a watchpoint, any change the inferior
had done itself to the debug registers needs to be
- discarded, otherwise, i386_dr_stopped_data_address can
+ discarded, otherwise, x86_dr_stopped_data_address can
get confused. */
clear_status = 1;
}
@@ -17,7 +17,7 @@
#include "server.h"
#include "win32-low.h"
-#include "i386-low.h"
+#include "x86-low.h"
#ifndef CONTEXT_EXTENDED_REGISTERS
#define CONTEXT_EXTENDED_REGISTERS 0
@@ -38,7 +38,7 @@ void init_registers_i386 (void);
extern const struct target_desc *tdesc_i386;
#endif
-static struct i386_debug_reg_state debug_reg_state;
+static struct x86_debug_reg_state debug_reg_state;
static int debug_registers_changed = 0;
static int debug_registers_used = 0;
@@ -46,7 +46,7 @@ static int debug_registers_used = 0;
/* Update the inferior's debug register REGNUM from STATE. */
static void
-i386_dr_low_set_addr (int regnum, CORE_ADDR addr)
+x86_dr_low_set_addr (int regnum, CORE_ADDR addr)
{
gdb_assert (DR_FIRSTADDR <= regnum && regnum <= DR_LASTADDR);
@@ -58,7 +58,7 @@ i386_dr_low_set_addr (int regnum, CORE_ADDR addr)
}
static CORE_ADDR
-i386_dr_low_get_addr (int regnum)
+x86_dr_low_get_addr (int regnum)
{
gdb_assert (DR_FIRSTADDR <= regnum && regnum <= DR_LASTADDR);
@@ -68,7 +68,7 @@ i386_dr_low_get_addr (int regnum)
/* Update the inferior's DR7 debug control register from STATE. */
static void
-i386_dr_low_set_control (unsigned long control)
+x86_dr_low_set_control (unsigned long control)
{
/* debug_reg_state.dr_control_mirror is already set.
Just notify i386_set_thread_context, i386_thread_added
@@ -78,7 +78,7 @@ i386_dr_low_set_control (unsigned long control)
}
static unsigned long
-i386_dr_low_get_control (void)
+x86_dr_low_get_control (void)
{
return debug_reg_state.dr_control_mirror;
}
@@ -87,7 +87,7 @@ i386_dr_low_get_control (void)
and record it in STATE. */
static unsigned long
-i386_dr_low_get_status (void)
+x86_dr_low_get_status (void)
{
/* We don't need to do anything here, the last call to thread_rec for
current_event.dwThreadId id has already set it. */
@@ -95,13 +95,13 @@ i386_dr_low_get_status (void)
}
/* Low-level function vector. */
-struct i386_dr_low_type i386_dr_low =
+struct x86_dr_low_type x86_dr_low =
{
- i386_dr_low_set_control,
- i386_dr_low_set_addr,
- i386_dr_low_get_addr,
- i386_dr_low_get_status,
- i386_dr_low_get_control,
+ x86_dr_low_set_control,
+ x86_dr_low_set_addr,
+ x86_dr_low_get_addr,
+ x86_dr_low_get_status,
+ x86_dr_low_get_control,
sizeof (void *),
};
@@ -132,8 +132,8 @@ i386_insert_point (enum raw_bkpt_type type, CORE_ADDR addr,
enum target_hw_bp_type hw_type
= raw_bkpt_type_to_target_hw_bp_type (type);
- return i386_dr_insert_watchpoint (&debug_reg_state,
- hw_type, addr, size);
+ return x86_dr_insert_watchpoint (&debug_reg_state,
+ hw_type, addr, size);
}
default:
/* Unsupported. */
@@ -153,8 +153,8 @@ i386_remove_point (enum raw_bkpt_type type, CORE_ADDR addr,
enum target_hw_bp_type hw_type
= raw_bkpt_type_to_target_hw_bp_type (type);
- return i386_dr_remove_watchpoint (&debug_reg_state,
- hw_type, addr, size);
+ return x86_dr_remove_watchpoint (&debug_reg_state,
+ hw_type, addr, size);
}
default:
/* Unsupported. */
@@ -163,16 +163,16 @@ i386_remove_point (enum raw_bkpt_type type, CORE_ADDR addr,
}
static int
-i386_stopped_by_watchpoint (void)
+x86_stopped_by_watchpoint (void)
{
- return i386_dr_stopped_by_watchpoint (&debug_reg_state);
+ return x86_dr_stopped_by_watchpoint (&debug_reg_state);
}
static CORE_ADDR
-i386_stopped_data_address (void)
+x86_stopped_data_address (void)
{
CORE_ADDR addr;
- if (i386_dr_stopped_data_address (&debug_reg_state, &addr))
+ if (x86_dr_stopped_data_address (&debug_reg_state, &addr))
return addr;
return 0;
}
@@ -180,7 +180,7 @@ i386_stopped_data_address (void)
static void
i386_initial_stuff (void)
{
- i386_low_init_dregs (&debug_reg_state);
+ x86_low_init_dregs (&debug_reg_state);
debug_registers_changed = 0;
debug_registers_used = 0;
}
@@ -216,7 +216,7 @@ i386_get_thread_context (win32_thread_info *th, DEBUG_EVENT* current_event)
if (th->tid == current_event->dwThreadId)
{
/* Copy dr values from the current thread. */
- struct i386_debug_reg_state *dr = &debug_reg_state;
+ struct x86_debug_reg_state *dr = &debug_reg_state;
dr->dr_mirror[0] = th->context.Dr0;
dr->dr_mirror[1] = th->context.Dr1;
dr->dr_mirror[2] = th->context.Dr2;
@@ -231,7 +231,7 @@ i386_set_thread_context (win32_thread_info *th, DEBUG_EVENT* current_event)
{
if (debug_registers_changed)
{
- struct i386_debug_reg_state *dr = &debug_reg_state;
+ struct x86_debug_reg_state *dr = &debug_reg_state;
th->context.Dr0 = dr->dr_mirror[0];
th->context.Dr1 = dr->dr_mirror[1];
th->context.Dr2 = dr->dr_mirror[2];
@@ -250,7 +250,7 @@ i386_thread_added (win32_thread_info *th)
/* Set the debug registers for the new thread if they are used. */
if (debug_registers_used)
{
- struct i386_debug_reg_state *dr = &debug_reg_state;
+ struct x86_debug_reg_state *dr = &debug_reg_state;
th->context.ContextFlags = CONTEXT_DEBUG_REGISTERS;
GetThreadContext (th->h, &th->context);
@@ -460,6 +460,6 @@ struct win32_target_ops the_low_target = {
i386_supports_z_point_type,
i386_insert_point,
i386_remove_point,
- i386_stopped_by_watchpoint,
- i386_stopped_data_address
+ x86_stopped_by_watchpoint,
+ x86_stopped_data_address
};
new file mode 100644
@@ -0,0 +1,38 @@
+/* Low level support for x86 (i386 and x86-64).
+
+ Copyright (C) 2009-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "server.h"
+#include "x86-low.h"
+
+/* Clear the reference counts and forget everything we knew about the
+ debug registers. */
+
+void
+x86_low_init_dregs (struct x86_debug_reg_state *state)
+{
+ int i;
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ state->dr_mirror[i] = 0;
+ state->dr_ref_count[i] = 0;
+ }
+ state->dr_control_mirror = 0;
+ state->dr_status_mirror = 0;
+}
new file mode 100644
@@ -0,0 +1,24 @@
+/* Low level support for x86 (i386 and x86-64).
+
+ Copyright (C) 2009-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+
+#include "nat/x86-dregs.h"
+
+/* Initialize STATE. */
+extern void x86_low_init_dregs (struct x86_debug_reg_state *state);
@@ -85,7 +85,7 @@
#include <fcntl.h>
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "inferior.h"
#include "infrun.h"
#include "gdbthread.h"
@@ -735,7 +735,7 @@ go32_mourn_inferior (struct target_ops *ops)
be nice if GDB itself would take care to remove all breakpoints
at all times, but it doesn't, probably under an assumption that
the OS cleans up when the debuggee exits. */
- i386_cleanup_dregs ();
+ x86_cleanup_dregs ();
ptid = inferior_ptid;
inferior_ptid = null_ptid;
@@ -2062,14 +2062,14 @@ _initialize_go32_nat (void)
{
struct target_ops *t = go32_target ();
- i386_dr_low.set_control = go32_set_dr7;
- i386_dr_low.set_addr = go32_set_dr;
- i386_dr_low.get_status = go32_get_dr6;
- i386_dr_low.get_control = go32_get_dr7;
- i386_dr_low.get_addr = go32_get_dr;
- i386_set_debug_register_length (4);
+ x86_dr_low.set_control = go32_set_dr7;
+ x86_dr_low.set_addr = go32_set_dr;
+ x86_dr_low.get_status = go32_get_dr6;
+ x86_dr_low.get_control = go32_get_dr7;
+ x86_dr_low.get_addr = go32_get_dr;
+ x86_set_debug_register_length (4);
- i386_use_watchpoints (t);
+ x86_use_watchpoints (t);
add_target (t);
/* Initialize child's cwd as empty to be initialized when starting
@@ -33,7 +33,7 @@
#include "arch-utils.h"
#include "gdbcore.h"
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "darwin-nat.h"
#include "i386-darwin-tdep.h"
@@ -628,19 +628,19 @@ darwin_complete_target (struct target_ops *target)
amd64_native_gregset32_num_regs = i386_darwin_thread_state_num_regs;
#endif
- i386_use_watchpoints (target);
+ x86_use_watchpoints (target);
- i386_dr_low.set_control = i386_darwin_dr_set_control;
- i386_dr_low.set_addr = i386_darwin_dr_set_addr;
- i386_dr_low.get_addr = i386_darwin_dr_get_addr;
- i386_dr_low.get_status = i386_darwin_dr_get_status;
- i386_dr_low.get_control = i386_darwin_dr_get_control;
+ x86_dr_low.set_control = i386_darwin_dr_set_control;
+ x86_dr_low.set_addr = i386_darwin_dr_set_addr;
+ x86_dr_low.get_addr = i386_darwin_dr_get_addr;
+ x86_dr_low.get_status = i386_darwin_dr_get_status;
+ x86_dr_low.get_control = i386_darwin_dr_get_control;
/* Let's assume that the kernel is 64 bits iff the executable is. */
#ifdef __x86_64__
- i386_set_debug_register_length (8);
+ x86_set_debug_register_length (8);
#else
- i386_set_debug_register_length (4);
+ x86_set_debug_register_length (4);
#endif
target->to_fetch_registers = i386_darwin_fetch_inferior_registers;
deleted file mode 100644
@@ -1,313 +0,0 @@
-/* Native-dependent code for the i386.
-
- Copyright (C) 2001-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include "defs.h"
-#include "i386-nat.h"
-#include "gdbcmd.h"
-#include "inferior.h"
-
-/* Support for hardware watchpoints and breakpoints using the i386
- debug registers.
-
- This provides several functions for inserting and removing
- hardware-assisted breakpoints and watchpoints, testing if one or
- more of the watchpoints triggered and at what address, checking
- whether a given region can be watched, etc.
-
- The functions below implement debug registers sharing by reference
- counts, and allow to watch regions up to 16 bytes long. */
-
-/* Low-level function vector. */
-struct i386_dr_low_type i386_dr_low;
-
-/* Per-process data. We don't bind this to a per-inferior registry
- because of targets like x86 GNU/Linux that need to keep track of
- processes that aren't bound to any inferior (e.g., fork children,
- checkpoints). */
-
-struct i386_process_info
-{
- /* Linked list. */
- struct i386_process_info *next;
-
- /* The process identifier. */
- pid_t pid;
-
- /* Copy of i386 hardware debug registers. */
- struct i386_debug_reg_state state;
-};
-
-static struct i386_process_info *i386_process_list = NULL;
-
-/* Find process data for process PID. */
-
-static struct i386_process_info *
-i386_find_process_pid (pid_t pid)
-{
- struct i386_process_info *proc;
-
- for (proc = i386_process_list; proc; proc = proc->next)
- if (proc->pid == pid)
- return proc;
-
- return NULL;
-}
-
-/* Add process data for process PID. Returns newly allocated info
- object. */
-
-static struct i386_process_info *
-i386_add_process (pid_t pid)
-{
- struct i386_process_info *proc;
-
- proc = xcalloc (1, sizeof (*proc));
- proc->pid = pid;
-
- proc->next = i386_process_list;
- i386_process_list = proc;
-
- return proc;
-}
-
-/* Get data specific info for process PID, creating it if necessary.
- Never returns NULL. */
-
-static struct i386_process_info *
-i386_process_info_get (pid_t pid)
-{
- struct i386_process_info *proc;
-
- proc = i386_find_process_pid (pid);
- if (proc == NULL)
- proc = i386_add_process (pid);
-
- return proc;
-}
-
-/* Get debug registers state for process PID. */
-
-struct i386_debug_reg_state *
-i386_debug_reg_state (pid_t pid)
-{
- return &i386_process_info_get (pid)->state;
-}
-
-/* See declaration in i386-nat.h. */
-
-void
-i386_forget_process (pid_t pid)
-{
- struct i386_process_info *proc, **proc_link;
-
- proc = i386_process_list;
- proc_link = &i386_process_list;
-
- while (proc != NULL)
- {
- if (proc->pid == pid)
- {
- *proc_link = proc->next;
-
- xfree (proc);
- return;
- }
-
- proc_link = &proc->next;
- proc = *proc_link;
- }
-}
-
-/* Clear the reference counts and forget everything we knew about the
- debug registers. */
-
-void
-i386_cleanup_dregs (void)
-{
- /* Starting from scratch has the same effect. */
- i386_forget_process (ptid_get_pid (inferior_ptid));
-}
-
-/* Insert a watchpoint to watch a memory region which starts at
- address ADDR and whose length is LEN bytes. Watch memory accesses
- of the type TYPE. Return 0 on success, -1 on failure. */
-
-static int
-i386_insert_watchpoint (struct target_ops *self,
- CORE_ADDR addr, int len, int type,
- struct expression *cond)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_insert_watchpoint (state, type, addr, len);
-}
-
-/* Remove a watchpoint that watched the memory region which starts at
- address ADDR, whose length is LEN bytes, and for accesses of the
- type TYPE. Return 0 on success, -1 on failure. */
-static int
-i386_remove_watchpoint (struct target_ops *self,
- CORE_ADDR addr, int len, int type,
- struct expression *cond)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_remove_watchpoint (state, type, addr, len);
-}
-
-/* Return non-zero if we can watch a memory region that starts at
- address ADDR and whose length is LEN bytes. */
-
-static int
-i386_region_ok_for_watchpoint (struct target_ops *self,
- CORE_ADDR addr, int len)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_region_ok_for_watchpoint (state, addr, len);
-}
-
-/* If the inferior has some break/watchpoint that triggered, set the
- address associated with that break/watchpoint and return non-zero.
- Otherwise, return zero. */
-
-static int
-i386_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_stopped_data_address (state, addr_p);
-}
-
-/* Return non-zero if the inferior has some watchpoint that triggered.
- Otherwise return zero. */
-
-static int
-i386_stopped_by_watchpoint (struct target_ops *ops)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_stopped_by_watchpoint (state);
-}
-
-/* Insert a hardware-assisted breakpoint at BP_TGT->placed_address.
- Return 0 on success, EBUSY on failure. */
-
-static int
-i386_insert_hw_breakpoint (struct target_ops *self, struct gdbarch *gdbarch,
- struct bp_target_info *bp_tgt)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_insert_watchpoint (state, hw_execute,
- bp_tgt->placed_address, 1) ? EBUSY : 0;
-}
-
-/* Remove a hardware-assisted breakpoint at BP_TGT->placed_address.
- Return 0 on success, -1 on failure. */
-
-static int
-i386_remove_hw_breakpoint (struct target_ops *self, struct gdbarch *gdbarch,
- struct bp_target_info *bp_tgt)
-{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (inferior_ptid));
-
- return i386_dr_remove_watchpoint (state, hw_execute,
- bp_tgt->placed_address, 1);
-}
-
-/* Returns the number of hardware watchpoints of type TYPE that we can
- set. Value is positive if we can set CNT watchpoints, zero if
- setting watchpoints of type TYPE is not supported, and negative if
- CNT is more than the maximum number of watchpoints of type TYPE
- that we can support. TYPE is one of bp_hardware_watchpoint,
- bp_read_watchpoint, bp_write_watchpoint, or bp_hardware_breakpoint.
- CNT is the number of such watchpoints used so far (including this
- one). OTHERTYPE is non-zero if other types of watchpoints are
- currently enabled.
-
- We always return 1 here because we don't have enough information
- about possible overlap of addresses that they want to watch. As an
- extreme example, consider the case where all the watchpoints watch
- the same address and the same region length: then we can handle a
- virtually unlimited number of watchpoints, due to debug register
- sharing implemented via reference counts in i386-nat.c. */
-
-static int
-i386_can_use_hw_breakpoint (struct target_ops *self,
- int type, int cnt, int othertype)
-{
- return 1;
-}
-
-static void
-add_show_debug_regs_command (void)
-{
- /* A maintenance command to enable printing the internal DRi mirror
- variables. */
- add_setshow_boolean_cmd ("show-debug-regs", class_maintenance,
- &show_debug_regs, _("\
-Set whether to show variables that mirror the x86 debug registers."), _("\
-Show whether to show variables that mirror the x86 debug registers."), _("\
-Use \"on\" to enable, \"off\" to disable.\n\
-If enabled, the debug registers values are shown when GDB inserts\n\
-or removes a hardware breakpoint or watchpoint, and when the inferior\n\
-triggers a breakpoint or watchpoint."),
- NULL,
- NULL,
- &maintenance_set_cmdlist,
- &maintenance_show_cmdlist);
-}
-
-/* There are only two global functions left. */
-
-void
-i386_use_watchpoints (struct target_ops *t)
-{
- /* After a watchpoint trap, the PC points to the instruction after the
- one that caused the trap. Therefore we don't need to step over it.
- But we do need to reset the status register to avoid another trap. */
- t->to_have_continuable_watchpoint = 1;
-
- t->to_can_use_hw_breakpoint = i386_can_use_hw_breakpoint;
- t->to_region_ok_for_hw_watchpoint = i386_region_ok_for_watchpoint;
- t->to_stopped_by_watchpoint = i386_stopped_by_watchpoint;
- t->to_stopped_data_address = i386_stopped_data_address;
- t->to_insert_watchpoint = i386_insert_watchpoint;
- t->to_remove_watchpoint = i386_remove_watchpoint;
- t->to_insert_hw_breakpoint = i386_insert_hw_breakpoint;
- t->to_remove_hw_breakpoint = i386_remove_hw_breakpoint;
-}
-
-void
-i386_set_debug_register_length (int len)
-{
- /* This function should be called only once for each native target. */
- gdb_assert (i386_dr_low.debug_register_length == 0);
- gdb_assert (len == 4 || len == 8);
- i386_dr_low.debug_register_length = len;
- add_show_debug_regs_command ();
-}
deleted file mode 100644
@@ -1,57 +0,0 @@
-/* Native-dependent code for the i386.
-
- Low level functions to implement Oeprating System specific
- code to manipulate I386 debug registers.
-
- Copyright (C) 2009-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef I386_NAT_H
-#define I386_NAT_H 1
-
-#include "nat/i386-dregs.h"
-
-/* Hardware-assisted breakpoints and watchpoints. */
-
-/* Add watchpoint methods to the provided target_ops.
- Targets using i386 family debug registers for watchpoints should call
- this. */
-struct target_ops;
-extern void i386_use_watchpoints (struct target_ops *);
-
-/* Use this function to set i386_dr_low debug_register_length field
- rather than setting it directly to check that the length is only
- set once. It also enables the 'maint set/show show-debug-regs'
- command. */
-
-extern void i386_set_debug_register_length (int len);
-
-/* Use this function to reset the i386-nat.c debug register state. */
-
-extern void i386_cleanup_dregs (void);
-
-/* Return a pointer to the local mirror of the debug registers of
- process PID. */
-
-extern struct i386_debug_reg_state *i386_debug_reg_state (pid_t pid);
-
-/* Called whenever GDB is no longer debugging process PID. It deletes
- data structures that keep track of debug register state. */
-
-extern void i386_forget_process (pid_t pid);
-
-#endif /* I386_NAT_H */
@@ -17,7 +17,7 @@
#include "defs.h"
#include "windows-nat.h"
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "i386-tdep.h"
#include <windows.h>
@@ -87,5 +87,5 @@ _initialize_i386_windows_nat (void)
{
windows_set_context_register_offsets (mappings);
windows_set_segment_register_p (i386_windows_segment_register_p);
- i386_set_debug_register_length (4);
+ x86_set_debug_register_length (4);
}
@@ -28,7 +28,7 @@
#include "fbsd-nat.h"
#include "i386-tdep.h"
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "i386bsd-nat.h"
/* Resume execution of the inferior process. If STEP is nonzero,
@@ -128,14 +128,14 @@ _initialize_i386fbsd_nat (void)
#ifdef HAVE_PT_GETDBREGS
- i386_use_watchpoints (t);
+ x86_use_watchpoints (t);
- i386_dr_low.set_control = i386bsd_dr_set_control;
- i386_dr_low.set_addr = i386bsd_dr_set_addr;
- i386_dr_low.get_addr = i386bsd_dr_get_addr;
- i386_dr_low.get_status = i386bsd_dr_get_status;
- i386_dr_low.get_control = i386bsd_dr_get_control;
- i386_set_debug_register_length (4);
+ x86_dr_low.set_control = i386bsd_dr_set_control;
+ x86_dr_low.set_addr = i386bsd_dr_set_addr;
+ x86_dr_low.get_addr = i386bsd_dr_get_addr;
+ x86_dr_low.get_status = i386bsd_dr_get_status;
+ x86_dr_low.get_control = i386bsd_dr_get_control;
+ x86_set_debug_register_length (4);
#endif /* HAVE_PT_GETDBREGS */
deleted file mode 100644
@@ -1,655 +0,0 @@
-/* Debug register code for the i386.
-
- Copyright (C) 2001-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include "common-defs.h"
-#include "i386-dregs.h"
-#include "break-common.h"
-
-/* Support for hardware watchpoints and breakpoints using the i386
- debug registers.
-
- This provides several functions for inserting and removing
- hardware-assisted breakpoints and watchpoints, testing if one or
- more of the watchpoints triggered and at what address, checking
- whether a given region can be watched, etc.
-
- The functions below implement debug registers sharing by reference
- counts, and allow to watch regions up to 16 bytes long. */
-
-/* Accessor macros for low-level function vector. */
-
-/* Can we update the inferior's debug registers? */
-#define i386_dr_low_can_set_addr() (i386_dr_low.set_addr != NULL)
-
-/* Update the inferior's debug register REGNUM from STATE. */
-#define i386_dr_low_set_addr(new_state, i) \
- (i386_dr_low.set_addr ((i), (new_state)->dr_mirror[(i)]))
-
-/* Return the inferior's debug register REGNUM. */
-#define i386_dr_low_get_addr(i) (i386_dr_low.get_addr ((i)))
-
-/* Can we update the inferior's DR7 control register? */
-#define i386_dr_low_can_set_control() (i386_dr_low.set_control != NULL)
-
-/* Update the inferior's DR7 debug control register from STATE. */
-#define i386_dr_low_set_control(new_state) \
- (i386_dr_low.set_control ((new_state)->dr_control_mirror))
-
-/* Return the value of the inferior's DR7 debug control register. */
-#define i386_dr_low_get_control() (i386_dr_low.get_control ())
-
-/* Return the value of the inferior's DR6 debug status register. */
-#define i386_dr_low_get_status() (i386_dr_low.get_status ())
-
-/* Return the debug register size, in bytes. */
-#define i386_get_debug_register_length() \
- (i386_dr_low.debug_register_length)
-
-/* Support for 8-byte wide hw watchpoints. */
-#define TARGET_HAS_DR_LEN_8 (i386_get_debug_register_length () == 8)
-
-/* DR7 Debug Control register fields. */
-
-/* How many bits to skip in DR7 to get to R/W and LEN fields. */
-#define DR_CONTROL_SHIFT 16
-/* How many bits in DR7 per R/W and LEN field for each watchpoint. */
-#define DR_CONTROL_SIZE 4
-
-/* Watchpoint/breakpoint read/write fields in DR7. */
-#define DR_RW_EXECUTE (0x0) /* Break on instruction execution. */
-#define DR_RW_WRITE (0x1) /* Break on data writes. */
-#define DR_RW_READ (0x3) /* Break on data reads or writes. */
-
-/* This is here for completeness. No platform supports this
- functionality yet (as of March 2001). Note that the DE flag in the
- CR4 register needs to be set to support this. */
-#ifndef DR_RW_IORW
-#define DR_RW_IORW (0x2) /* Break on I/O reads or writes. */
-#endif
-
-/* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift
- is so we could OR this with the read/write field defined above. */
-#define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpoint. */
-#define DR_LEN_2 (0x1 << 2) /* 2-byte region watch. */
-#define DR_LEN_4 (0x3 << 2) /* 4-byte region watch. */
-#define DR_LEN_8 (0x2 << 2) /* 8-byte region watch (AMD64). */
-
-/* Local and Global Enable flags in DR7.
-
- When the Local Enable flag is set, the breakpoint/watchpoint is
- enabled only for the current task; the processor automatically
- clears this flag on every task switch. When the Global Enable flag
- is set, the breakpoint/watchpoint is enabled for all tasks; the
- processor never clears this flag.
-
- Currently, all watchpoint are locally enabled. If you need to
- enable them globally, read the comment which pertains to this in
- i386_insert_aligned_watchpoint below. */
-#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit. */
-#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit. */
-#define DR_ENABLE_SIZE 2 /* Two enable bits per debug register. */
-
-/* Local and global exact breakpoint enable flags (a.k.a. slowdown
- flags). These are only required on i386, to allow detection of the
- exact instruction which caused a watchpoint to break; i486 and
- later processors do that automatically. We set these flags for
- backwards compatibility. */
-#define DR_LOCAL_SLOWDOWN (0x100)
-#define DR_GLOBAL_SLOWDOWN (0x200)
-
-/* Fields reserved by Intel. This includes the GD (General Detect
- Enable) flag, which causes a debug exception to be generated when a
- MOV instruction accesses one of the debug registers.
-
- FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */
-#define DR_CONTROL_RESERVED (0xFC00)
-
-/* Auxiliary helper macros. */
-
-/* A value that masks all fields in DR7 that are reserved by Intel. */
-#define I386_DR_CONTROL_MASK (~DR_CONTROL_RESERVED)
-
-/* The I'th debug register is vacant if its Local and Global Enable
- bits are reset in the Debug Control register. */
-#define I386_DR_VACANT(state, i) \
- (((state)->dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0)
-
-/* Locally enable the break/watchpoint in the I'th debug register. */
-#define I386_DR_LOCAL_ENABLE(state, i) \
- do { \
- (state)->dr_control_mirror |= \
- (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
- } while (0)
-
-/* Globally enable the break/watchpoint in the I'th debug register. */
-#define I386_DR_GLOBAL_ENABLE(state, i) \
- do { \
- (state)->dr_control_mirror |= \
- (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
- } while (0)
-
-/* Disable the break/watchpoint in the I'th debug register. */
-#define I386_DR_DISABLE(state, i) \
- do { \
- (state)->dr_control_mirror &= \
- ~(3 << (DR_ENABLE_SIZE * (i))); \
- } while (0)
-
-/* Set in DR7 the RW and LEN fields for the I'th debug register. */
-#define I386_DR_SET_RW_LEN(state, i, rwlen) \
- do { \
- (state)->dr_control_mirror &= \
- ~(0x0f << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
- (state)->dr_control_mirror |= \
- ((rwlen) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
- } while (0)
-
-/* Get from DR7 the RW and LEN fields for the I'th debug register. */
-#define I386_DR_GET_RW_LEN(dr7, i) \
- (((dr7) \
- >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f)
-
-/* Did the watchpoint whose address is in the I'th register break? */
-#define I386_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i)))
-
-/* Types of operations supported by i386_handle_nonaligned_watchpoint. */
-typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t;
-
-/* Print the values of the mirrored debug registers. */
-
-static void
-i386_show_dr (struct i386_debug_reg_state *state,
- const char *func, CORE_ADDR addr,
- int len, enum target_hw_bp_type type)
-{
- int i;
-
- debug_printf ("%s", func);
- if (addr || len)
- debug_printf (" (addr=%s, len=%d, type=%s)",
- phex (addr, 8), len,
- type == hw_write ? "data-write"
- : (type == hw_read ? "data-read"
- : (type == hw_access ? "data-read/write"
- : (type == hw_execute ? "instruction-execute"
- /* FIXME: if/when I/O read/write
- watchpoints are supported, add them
- here. */
- : "??unknown??"))));
- debug_printf (":\n");
- debug_printf ("\tCONTROL (DR7): %s STATUS (DR6): %s\n",
- phex (state->dr_control_mirror, 8),
- phex (state->dr_status_mirror, 8));
- ALL_DEBUG_REGISTERS (i)
- {
- debug_printf ("\
-\tDR%d: addr=0x%s, ref.count=%d DR%d: addr=0x%s, ref.count=%d\n",
- i, phex (state->dr_mirror[i],
- i386_get_debug_register_length ()),
- state->dr_ref_count[i],
- i + 1, phex (state->dr_mirror[i + 1],
- i386_get_debug_register_length ()),
- state->dr_ref_count[i + 1]);
- i++;
- }
-}
-
-/* Return the value of a 4-bit field for DR7 suitable for watching a
- region of LEN bytes for accesses of type TYPE. LEN is assumed to
- have the value of 1, 2, or 4. */
-
-static unsigned
-i386_length_and_rw_bits (int len, enum target_hw_bp_type type)
-{
- unsigned rw;
-
- switch (type)
- {
- case hw_execute:
- rw = DR_RW_EXECUTE;
- break;
- case hw_write:
- rw = DR_RW_WRITE;
- break;
- case hw_read:
- internal_error (__FILE__, __LINE__,
- _("The i386 doesn't support "
- "data-read watchpoints.\n"));
- case hw_access:
- rw = DR_RW_READ;
- break;
-#if 0
- /* Not yet supported. */
- case hw_io_access:
- rw = DR_RW_IORW;
- break;
-#endif
- default:
- internal_error (__FILE__, __LINE__, _("\
-Invalid hardware breakpoint type %d in i386_length_and_rw_bits.\n"),
- (int) type);
- }
-
- switch (len)
- {
- case 1:
- return (DR_LEN_1 | rw);
- case 2:
- return (DR_LEN_2 | rw);
- case 4:
- return (DR_LEN_4 | rw);
- case 8:
- if (TARGET_HAS_DR_LEN_8)
- return (DR_LEN_8 | rw);
- /* ELSE FALL THROUGH */
- default:
- internal_error (__FILE__, __LINE__, _("\
-Invalid hardware breakpoint length %d in i386_length_and_rw_bits.\n"), len);
- }
-}
-
-/* Insert a watchpoint at address ADDR, which is assumed to be aligned
- according to the length of the region to watch. LEN_RW_BITS is the
- value of the bits from DR7 which describes the length and access
- type of the region to be watched by this watchpoint. Return 0 on
- success, -1 on failure. */
-
-static int
-i386_insert_aligned_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, unsigned len_rw_bits)
-{
- int i;
-
- if (!i386_dr_low_can_set_addr () || !i386_dr_low_can_set_control ())
- return -1;
-
- /* First, look for an occupied debug register with the same address
- and the same RW and LEN definitions. If we find one, we can
- reuse it for this watchpoint as well (and save a register). */
- ALL_DEBUG_REGISTERS (i)
- {
- if (!I386_DR_VACANT (state, i)
- && state->dr_mirror[i] == addr
- && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
- {
- state->dr_ref_count[i]++;
- return 0;
- }
- }
-
- /* Next, look for a vacant debug register. */
- ALL_DEBUG_REGISTERS (i)
- {
- if (I386_DR_VACANT (state, i))
- break;
- }
-
- /* No more debug registers! */
- if (i >= DR_NADDR)
- return -1;
-
- /* Now set up the register I to watch our region. */
-
- /* Record the info in our local mirrored array. */
- state->dr_mirror[i] = addr;
- state->dr_ref_count[i] = 1;
- I386_DR_SET_RW_LEN (state, i, len_rw_bits);
- /* Note: we only enable the watchpoint locally, i.e. in the current
- task. Currently, no i386 target allows or supports global
- watchpoints; however, if any target would want that in the
- future, GDB should probably provide a command to control whether
- to enable watchpoints globally or locally, and the code below
- should use global or local enable and slow-down flags as
- appropriate. */
- I386_DR_LOCAL_ENABLE (state, i);
- state->dr_control_mirror |= DR_LOCAL_SLOWDOWN;
- state->dr_control_mirror &= I386_DR_CONTROL_MASK;
-
- return 0;
-}
-
-/* Remove a watchpoint at address ADDR, which is assumed to be aligned
- according to the length of the region to watch. LEN_RW_BITS is the
- value of the bits from DR7 which describes the length and access
- type of the region watched by this watchpoint. Return 0 on
- success, -1 on failure. */
-
-static int
-i386_remove_aligned_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, unsigned len_rw_bits)
-{
- int i, retval = -1;
- int all_vacant = 1;
-
- ALL_DEBUG_REGISTERS (i)
- {
- if (!I386_DR_VACANT (state, i)
- && state->dr_mirror[i] == addr
- && I386_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
- {
- if (--state->dr_ref_count[i] == 0) /* No longer in use? */
- {
- /* Reset our mirror. */
- state->dr_mirror[i] = 0;
- I386_DR_DISABLE (state, i);
- /* Even though not strictly necessary, clear out all
- bits in DR_CONTROL related to this debug register.
- Debug output is clearer when we don't have stale bits
- in place. This also allows the assertion below. */
- I386_DR_SET_RW_LEN (state, i, 0);
- }
- retval = 0;
- }
-
- if (!I386_DR_VACANT (state, i))
- all_vacant = 0;
- }
-
- if (all_vacant)
- {
- /* Even though not strictly necessary, clear out all of
- DR_CONTROL, so that when we have no debug registers in use,
- we end up with DR_CONTROL == 0. The Linux support relies on
- this for an optimization. Plus, it makes for clearer debug
- output. */
- state->dr_control_mirror &= ~DR_LOCAL_SLOWDOWN;
-
- gdb_assert (state->dr_control_mirror == 0);
- }
- return retval;
-}
-
-/* Insert or remove a (possibly non-aligned) watchpoint, or count the
- number of debug registers required to watch a region at address
- ADDR whose length is LEN for accesses of type TYPE. Return 0 on
- successful insertion or removal, a positive number when queried
- about the number of registers, or -1 on failure. If WHAT is not a
- valid value, bombs through internal_error. */
-
-static int
-i386_handle_nonaligned_watchpoint (struct i386_debug_reg_state *state,
- i386_wp_op_t what, CORE_ADDR addr, int len,
- enum target_hw_bp_type type)
-{
- int retval = 0;
- int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4;
-
- static const int size_try_array[8][8] =
- {
- {1, 1, 1, 1, 1, 1, 1, 1}, /* Trying size one. */
- {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size two. */
- {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size three. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size four. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size five. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size six. */
- {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size seven. */
- {8, 1, 2, 1, 4, 1, 2, 1}, /* Trying size eight. */
- };
-
- while (len > 0)
- {
- int align = addr % max_wp_len;
- /* Four (eight on AMD64) is the maximum length a debug register
- can watch. */
- int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1);
- int size = size_try_array[try][align];
-
- if (what == WP_COUNT)
- {
- /* size_try_array[] is defined such that each iteration
- through the loop is guaranteed to produce an address and a
- size that can be watched with a single debug register.
- Thus, for counting the registers required to watch a
- region, we simply need to increment the count on each
- iteration. */
- retval++;
- }
- else
- {
- unsigned len_rw = i386_length_and_rw_bits (size, type);
-
- if (what == WP_INSERT)
- retval = i386_insert_aligned_watchpoint (state, addr, len_rw);
- else if (what == WP_REMOVE)
- retval = i386_remove_aligned_watchpoint (state, addr, len_rw);
- else
- internal_error (__FILE__, __LINE__, _("\
-Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n"),
- (int) what);
- if (retval)
- break;
- }
-
- addr += size;
- len -= size;
- }
-
- return retval;
-}
-
-/* Update the inferior debug registers state, in STATE, with the
- new debug registers state, in NEW_STATE. */
-
-static void
-i386_update_inferior_debug_regs (struct i386_debug_reg_state *state,
- struct i386_debug_reg_state *new_state)
-{
- int i;
-
- ALL_DEBUG_REGISTERS (i)
- {
- if (I386_DR_VACANT (new_state, i) != I386_DR_VACANT (state, i))
- i386_dr_low_set_addr (new_state, i);
- else
- gdb_assert (new_state->dr_mirror[i] == state->dr_mirror[i]);
- }
-
- if (new_state->dr_control_mirror != state->dr_control_mirror)
- i386_dr_low_set_control (new_state);
-
- *state = *new_state;
-}
-
-/* Insert a watchpoint to watch a memory region which starts at
- address ADDR and whose length is LEN bytes. Watch memory accesses
- of the type TYPE. Return 0 on success, -1 on failure. */
-
-int
-i386_dr_insert_watchpoint (struct i386_debug_reg_state *state,
- enum target_hw_bp_type type,
- CORE_ADDR addr, int len)
-{
- int retval;
- /* Work on a local copy of the debug registers, and on success,
- commit the change back to the inferior. */
- struct i386_debug_reg_state local_state = *state;
-
- if (type == hw_read)
- return 1; /* unsupported */
-
- if (((len != 1 && len != 2 && len != 4)
- && !(TARGET_HAS_DR_LEN_8 && len == 8))
- || addr % len != 0)
- {
- retval = i386_handle_nonaligned_watchpoint (&local_state,
- WP_INSERT,
- addr, len, type);
- }
- else
- {
- unsigned len_rw = i386_length_and_rw_bits (len, type);
-
- retval = i386_insert_aligned_watchpoint (&local_state,
- addr, len_rw);
- }
-
- if (retval == 0)
- i386_update_inferior_debug_regs (state, &local_state);
-
- if (show_debug_regs)
- i386_show_dr (state, "insert_watchpoint", addr, len, type);
-
- return retval;
-}
-
-/* Remove a watchpoint that watched the memory region which starts at
- address ADDR, whose length is LEN bytes, and for accesses of the
- type TYPE. Return 0 on success, -1 on failure. */
-
-int
-i386_dr_remove_watchpoint (struct i386_debug_reg_state *state,
- enum target_hw_bp_type type,
- CORE_ADDR addr, int len)
-{
- int retval;
- /* Work on a local copy of the debug registers, and on success,
- commit the change back to the inferior. */
- struct i386_debug_reg_state local_state = *state;
-
- if (((len != 1 && len != 2 && len != 4)
- && !(TARGET_HAS_DR_LEN_8 && len == 8))
- || addr % len != 0)
- {
- retval = i386_handle_nonaligned_watchpoint (&local_state,
- WP_REMOVE,
- addr, len, type);
- }
- else
- {
- unsigned len_rw = i386_length_and_rw_bits (len, type);
-
- retval = i386_remove_aligned_watchpoint (&local_state,
- addr, len_rw);
- }
-
- if (retval == 0)
- i386_update_inferior_debug_regs (state, &local_state);
-
- if (show_debug_regs)
- i386_show_dr (state, "remove_watchpoint", addr, len, type);
-
- return retval;
-}
-
-/* Return non-zero if we can watch a memory region that starts at
- address ADDR and whose length is LEN bytes. */
-
-int
-i386_dr_region_ok_for_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, int len)
-{
- int nregs;
-
- /* Compute how many aligned watchpoints we would need to cover this
- region. */
- nregs = i386_handle_nonaligned_watchpoint (state, WP_COUNT,
- addr, len, hw_write);
- return nregs <= DR_NADDR ? 1 : 0;
-}
-
-/* If the inferior has some break/watchpoint that triggered, set the
- address associated with that break/watchpoint and return non-zero.
- Otherwise, return zero. */
-
-int
-i386_dr_stopped_data_address (struct i386_debug_reg_state *state,
- CORE_ADDR *addr_p)
-{
- CORE_ADDR addr = 0;
- int i;
- int rc = 0;
- /* The current thread's DR_STATUS. We always need to read this to
- check whether some watchpoint caused the trap. */
- unsigned status;
- /* We need DR_CONTROL as well, but only iff DR_STATUS indicates a
- data breakpoint trap. Only fetch it when necessary, to avoid an
- unnecessary extra syscall when no watchpoint triggered. */
- int control_p = 0;
- unsigned control = 0;
-
- /* In non-stop/async, threads can be running while we change the
- global dr_mirror (and friends). Say, we set a watchpoint, and
- let threads resume. Now, say you delete the watchpoint, or
- add/remove watchpoints such that dr_mirror changes while threads
- are running. On targets that support non-stop,
- inserting/deleting watchpoints updates the global dr_mirror only.
- It does not update the real thread's debug registers; that's only
- done prior to resume. Instead, if threads are running when the
- mirror changes, a temporary and transparent stop on all threads
- is forced so they can get their copy of the debug registers
- updated on re-resume. Now, say, a thread hit a watchpoint before
- having been updated with the new dr_mirror contents, and we
- haven't yet handled the corresponding SIGTRAP. If we trusted
- dr_mirror below, we'd mistake the real trapped address (from the
- last time we had updated debug registers in the thread) with
- whatever was currently in dr_mirror. So to fix this, dr_mirror
- always represents intention, what we _want_ threads to have in
- debug registers. To get at the address and cause of the trap, we
- need to read the state the thread still has in its debug
- registers.
-
- In sum, always get the current debug register values the current
- thread has, instead of trusting the global mirror. If the thread
- was running when we last changed watchpoints, the mirror no
- longer represents what was set in this thread's debug
- registers. */
- status = i386_dr_low_get_status ();
-
- ALL_DEBUG_REGISTERS (i)
- {
- if (!I386_DR_WATCH_HIT (status, i))
- continue;
-
- if (!control_p)
- {
- control = i386_dr_low_get_control ();
- control_p = 1;
- }
-
- /* This second condition makes sure DRi is set up for a data
- watchpoint, not a hardware breakpoint. The reason is that
- GDB doesn't call the target_stopped_data_address method
- except for data watchpoints. In other words, I'm being
- paranoiac. */
- if (I386_DR_GET_RW_LEN (control, i) != 0)
- {
- addr = i386_dr_low_get_addr (i);
- rc = 1;
- if (show_debug_regs)
- i386_show_dr (state, "watchpoint_hit", addr, -1, hw_write);
- }
- }
-
- if (show_debug_regs && addr == 0)
- i386_show_dr (state, "stopped_data_addr", 0, 0, hw_write);
-
- if (rc)
- *addr_p = addr;
- return rc;
-}
-
-/* Return non-zero if the inferior has some watchpoint that triggered.
- Otherwise return zero. */
-
-int
-i386_dr_stopped_by_watchpoint (struct i386_debug_reg_state *state)
-{
- CORE_ADDR addr = 0;
- return i386_dr_stopped_data_address (state, &addr);
-}
deleted file mode 100644
@@ -1,126 +0,0 @@
-/* Debug register code for the i386.
-
- Copyright (C) 2009-2014 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* Support for hardware watchpoints and breakpoints using the i386
- debug registers.
-
- This provides several functions for inserting and removing
- hardware-assisted breakpoints and watchpoints, testing if one or
- more of the watchpoints triggered and at what address, checking
- whether a given region can be watched, etc.
-
- The functions below implement debug registers sharing by reference
- counts, and allow to watch regions up to 16 bytes long
- (32 bytes on 64 bit hosts). */
-
-#ifndef I386_DREGS_H
-#define I386_DREGS_H 1
-
-/* Forward declaration. */
-enum target_hw_bp_type;
-
-/* Low-level function vector. */
-
-struct i386_dr_low_type
- {
- /* Set the debug control (DR7) register to a given value for
- all LWPs. May be NULL if the debug control register cannot
- be set. */
- void (*set_control) (unsigned long);
-
- /* Put an address into one debug register for all LWPs. May
- be NULL if debug registers cannot be set*/
- void (*set_addr) (int, CORE_ADDR);
-
- /* Return the address in a given debug register of the current
- LWP. */
- CORE_ADDR (*get_addr) (int);
-
- /* Return the value of the debug status (DR6) register for
- current LWP. */
- unsigned long (*get_status) (void);
-
- /* Return the value of the debug control (DR7) register for
- current LWP. */
- unsigned long (*get_control) (void);
-
- /* Number of bytes used for debug registers (4 or 8). */
- int debug_register_length;
- };
-
-extern struct i386_dr_low_type i386_dr_low;
-
-/* Debug registers' indices. */
-#define DR_FIRSTADDR 0
-#define DR_LASTADDR 3
-#define DR_NADDR 4 /* The number of debug address registers. */
-#define DR_STATUS 6 /* Index of debug status register (DR6). */
-#define DR_CONTROL 7 /* Index of debug control register (DR7). */
-
-/* Global state needed to track h/w watchpoints. */
-
-struct i386_debug_reg_state
-{
- /* Mirror the inferior's DRi registers. We keep the status and
- control registers separated because they don't hold addresses.
- Note that since we can change these mirrors while threads are
- running, we never trust them to explain a cause of a trap.
- For that, we need to peek directly in the inferior registers. */
- CORE_ADDR dr_mirror[DR_NADDR];
- unsigned dr_status_mirror, dr_control_mirror;
-
- /* Reference counts for each debug register. */
- int dr_ref_count[DR_NADDR];
-};
-
-/* A macro to loop over all debug registers. */
-#define ALL_DEBUG_REGISTERS(i) for (i = 0; i < DR_NADDR; i++)
-
-/* Insert a watchpoint to watch a memory region which starts at
- address ADDR and whose length is LEN bytes. Watch memory accesses
- of the type TYPE. Return 0 on success, -1 on failure. */
-extern int i386_dr_insert_watchpoint (struct i386_debug_reg_state *state,
- enum target_hw_bp_type type,
- CORE_ADDR addr,
- int len);
-
-/* Remove a watchpoint that watched the memory region which starts at
- address ADDR, whose length is LEN bytes, and for accesses of the
- type TYPE. Return 0 on success, -1 on failure. */
-extern int i386_dr_remove_watchpoint (struct i386_debug_reg_state *state,
- enum target_hw_bp_type type,
- CORE_ADDR addr,
- int len);
-
-/* Return non-zero if we can watch a memory region that starts at
- address ADDR and whose length is LEN bytes. */
-extern int i386_dr_region_ok_for_watchpoint (struct i386_debug_reg_state *state,
- CORE_ADDR addr, int len);
-
-/* If the inferior has some break/watchpoint that triggered, set the
- address associated with that break/watchpoint and return true.
- Otherwise, return false. */
-extern int i386_dr_stopped_data_address (struct i386_debug_reg_state *state,
- CORE_ADDR *addr_p);
-
-/* Return true if the inferior has some watchpoint that triggered.
- Otherwise return false. */
-extern int i386_dr_stopped_by_watchpoint (struct i386_debug_reg_state *state);
-
-#endif /* I386_DREGS_H */
new file mode 100644
@@ -0,0 +1,655 @@
+/* Debug register code for x86 (i386 and x86-64).
+
+ Copyright (C) 2001-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "common-defs.h"
+#include "x86-dregs.h"
+#include "break-common.h"
+
+/* Support for hardware watchpoints and breakpoints using the x86
+ debug registers.
+
+ This provides several functions for inserting and removing
+ hardware-assisted breakpoints and watchpoints, testing if one or
+ more of the watchpoints triggered and at what address, checking
+ whether a given region can be watched, etc.
+
+ The functions below implement debug registers sharing by reference
+ counts, and allow to watch regions up to 16 bytes long. */
+
+/* Accessor macros for low-level function vector. */
+
+/* Can we update the inferior's debug registers? */
+#define x86_dr_low_can_set_addr() (x86_dr_low.set_addr != NULL)
+
+/* Update the inferior's debug register REGNUM from STATE. */
+#define x86_dr_low_set_addr(new_state, i) \
+ (x86_dr_low.set_addr ((i), (new_state)->dr_mirror[(i)]))
+
+/* Return the inferior's debug register REGNUM. */
+#define x86_dr_low_get_addr(i) (x86_dr_low.get_addr ((i)))
+
+/* Can we update the inferior's DR7 control register? */
+#define x86_dr_low_can_set_control() (x86_dr_low.set_control != NULL)
+
+/* Update the inferior's DR7 debug control register from STATE. */
+#define x86_dr_low_set_control(new_state) \
+ (x86_dr_low.set_control ((new_state)->dr_control_mirror))
+
+/* Return the value of the inferior's DR7 debug control register. */
+#define x86_dr_low_get_control() (x86_dr_low.get_control ())
+
+/* Return the value of the inferior's DR6 debug status register. */
+#define x86_dr_low_get_status() (x86_dr_low.get_status ())
+
+/* Return the debug register size, in bytes. */
+#define x86_get_debug_register_length() \
+ (x86_dr_low.debug_register_length)
+
+/* Support for 8-byte wide hw watchpoints. */
+#define TARGET_HAS_DR_LEN_8 (x86_get_debug_register_length () == 8)
+
+/* DR7 Debug Control register fields. */
+
+/* How many bits to skip in DR7 to get to R/W and LEN fields. */
+#define DR_CONTROL_SHIFT 16
+/* How many bits in DR7 per R/W and LEN field for each watchpoint. */
+#define DR_CONTROL_SIZE 4
+
+/* Watchpoint/breakpoint read/write fields in DR7. */
+#define DR_RW_EXECUTE (0x0) /* Break on instruction execution. */
+#define DR_RW_WRITE (0x1) /* Break on data writes. */
+#define DR_RW_READ (0x3) /* Break on data reads or writes. */
+
+/* This is here for completeness. No platform supports this
+ functionality yet (as of March 2001). Note that the DE flag in the
+ CR4 register needs to be set to support this. */
+#ifndef DR_RW_IORW
+#define DR_RW_IORW (0x2) /* Break on I/O reads or writes. */
+#endif
+
+/* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift
+ is so we could OR this with the read/write field defined above. */
+#define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpoint. */
+#define DR_LEN_2 (0x1 << 2) /* 2-byte region watch. */
+#define DR_LEN_4 (0x3 << 2) /* 4-byte region watch. */
+#define DR_LEN_8 (0x2 << 2) /* 8-byte region watch (AMD64). */
+
+/* Local and Global Enable flags in DR7.
+
+ When the Local Enable flag is set, the breakpoint/watchpoint is
+ enabled only for the current task; the processor automatically
+ clears this flag on every task switch. When the Global Enable flag
+ is set, the breakpoint/watchpoint is enabled for all tasks; the
+ processor never clears this flag.
+
+ Currently, all watchpoint are locally enabled. If you need to
+ enable them globally, read the comment which pertains to this in
+ x86_insert_aligned_watchpoint below. */
+#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit. */
+#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit. */
+#define DR_ENABLE_SIZE 2 /* Two enable bits per debug register. */
+
+/* Local and global exact breakpoint enable flags (a.k.a. slowdown
+ flags). These are only required on i386, to allow detection of the
+ exact instruction which caused a watchpoint to break; i486 and
+ later processors do that automatically. We set these flags for
+ backwards compatibility. */
+#define DR_LOCAL_SLOWDOWN (0x100)
+#define DR_GLOBAL_SLOWDOWN (0x200)
+
+/* Fields reserved by Intel. This includes the GD (General Detect
+ Enable) flag, which causes a debug exception to be generated when a
+ MOV instruction accesses one of the debug registers.
+
+ FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */
+#define DR_CONTROL_RESERVED (0xFC00)
+
+/* Auxiliary helper macros. */
+
+/* A value that masks all fields in DR7 that are reserved by Intel. */
+#define X86_DR_CONTROL_MASK (~DR_CONTROL_RESERVED)
+
+/* The I'th debug register is vacant if its Local and Global Enable
+ bits are reset in the Debug Control register. */
+#define X86_DR_VACANT(state, i) \
+ (((state)->dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0)
+
+/* Locally enable the break/watchpoint in the I'th debug register. */
+#define X86_DR_LOCAL_ENABLE(state, i) \
+ do { \
+ (state)->dr_control_mirror |= \
+ (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
+ } while (0)
+
+/* Globally enable the break/watchpoint in the I'th debug register. */
+#define X86_DR_GLOBAL_ENABLE(state, i) \
+ do { \
+ (state)->dr_control_mirror |= \
+ (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i))); \
+ } while (0)
+
+/* Disable the break/watchpoint in the I'th debug register. */
+#define X86_DR_DISABLE(state, i) \
+ do { \
+ (state)->dr_control_mirror &= \
+ ~(3 << (DR_ENABLE_SIZE * (i))); \
+ } while (0)
+
+/* Set in DR7 the RW and LEN fields for the I'th debug register. */
+#define X86_DR_SET_RW_LEN(state, i, rwlen) \
+ do { \
+ (state)->dr_control_mirror &= \
+ ~(0x0f << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
+ (state)->dr_control_mirror |= \
+ ((rwlen) << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))); \
+ } while (0)
+
+/* Get from DR7 the RW and LEN fields for the I'th debug register. */
+#define X86_DR_GET_RW_LEN(dr7, i) \
+ (((dr7) \
+ >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f)
+
+/* Did the watchpoint whose address is in the I'th register break? */
+#define X86_DR_WATCH_HIT(dr6, i) ((dr6) & (1 << (i)))
+
+/* Types of operations supported by x86_handle_nonaligned_watchpoint. */
+typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } x86_wp_op_t;
+
+/* Print the values of the mirrored debug registers. */
+
+static void
+x86_show_dr (struct x86_debug_reg_state *state,
+ const char *func, CORE_ADDR addr,
+ int len, enum target_hw_bp_type type)
+{
+ int i;
+
+ debug_printf ("%s", func);
+ if (addr || len)
+ debug_printf (" (addr=%s, len=%d, type=%s)",
+ phex (addr, 8), len,
+ type == hw_write ? "data-write"
+ : (type == hw_read ? "data-read"
+ : (type == hw_access ? "data-read/write"
+ : (type == hw_execute ? "instruction-execute"
+ /* FIXME: if/when I/O read/write
+ watchpoints are supported, add them
+ here. */
+ : "??unknown??"))));
+ debug_printf (":\n");
+ debug_printf ("\tCONTROL (DR7): %s STATUS (DR6): %s\n",
+ phex (state->dr_control_mirror, 8),
+ phex (state->dr_status_mirror, 8));
+ ALL_DEBUG_REGISTERS (i)
+ {
+ debug_printf ("\
+\tDR%d: addr=0x%s, ref.count=%d DR%d: addr=0x%s, ref.count=%d\n",
+ i, phex (state->dr_mirror[i],
+ x86_get_debug_register_length ()),
+ state->dr_ref_count[i],
+ i + 1, phex (state->dr_mirror[i + 1],
+ x86_get_debug_register_length ()),
+ state->dr_ref_count[i + 1]);
+ i++;
+ }
+}
+
+/* Return the value of a 4-bit field for DR7 suitable for watching a
+ region of LEN bytes for accesses of type TYPE. LEN is assumed to
+ have the value of 1, 2, or 4. */
+
+static unsigned
+x86_length_and_rw_bits (int len, enum target_hw_bp_type type)
+{
+ unsigned rw;
+
+ switch (type)
+ {
+ case hw_execute:
+ rw = DR_RW_EXECUTE;
+ break;
+ case hw_write:
+ rw = DR_RW_WRITE;
+ break;
+ case hw_read:
+ internal_error (__FILE__, __LINE__,
+ _("The i386 doesn't support "
+ "data-read watchpoints.\n"));
+ case hw_access:
+ rw = DR_RW_READ;
+ break;
+#if 0
+ /* Not yet supported. */
+ case hw_io_access:
+ rw = DR_RW_IORW;
+ break;
+#endif
+ default:
+ internal_error (__FILE__, __LINE__, _("\
+Invalid hardware breakpoint type %d in x86_length_and_rw_bits.\n"),
+ (int) type);
+ }
+
+ switch (len)
+ {
+ case 1:
+ return (DR_LEN_1 | rw);
+ case 2:
+ return (DR_LEN_2 | rw);
+ case 4:
+ return (DR_LEN_4 | rw);
+ case 8:
+ if (TARGET_HAS_DR_LEN_8)
+ return (DR_LEN_8 | rw);
+ /* ELSE FALL THROUGH */
+ default:
+ internal_error (__FILE__, __LINE__, _("\
+Invalid hardware breakpoint length %d in x86_length_and_rw_bits.\n"), len);
+ }
+}
+
+/* Insert a watchpoint at address ADDR, which is assumed to be aligned
+ according to the length of the region to watch. LEN_RW_BITS is the
+ value of the bits from DR7 which describes the length and access
+ type of the region to be watched by this watchpoint. Return 0 on
+ success, -1 on failure. */
+
+static int
+x86_insert_aligned_watchpoint (struct x86_debug_reg_state *state,
+ CORE_ADDR addr, unsigned len_rw_bits)
+{
+ int i;
+
+ if (!x86_dr_low_can_set_addr () || !x86_dr_low_can_set_control ())
+ return -1;
+
+ /* First, look for an occupied debug register with the same address
+ and the same RW and LEN definitions. If we find one, we can
+ reuse it for this watchpoint as well (and save a register). */
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (!X86_DR_VACANT (state, i)
+ && state->dr_mirror[i] == addr
+ && X86_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
+ {
+ state->dr_ref_count[i]++;
+ return 0;
+ }
+ }
+
+ /* Next, look for a vacant debug register. */
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (X86_DR_VACANT (state, i))
+ break;
+ }
+
+ /* No more debug registers! */
+ if (i >= DR_NADDR)
+ return -1;
+
+ /* Now set up the register I to watch our region. */
+
+ /* Record the info in our local mirrored array. */
+ state->dr_mirror[i] = addr;
+ state->dr_ref_count[i] = 1;
+ X86_DR_SET_RW_LEN (state, i, len_rw_bits);
+ /* Note: we only enable the watchpoint locally, i.e. in the current
+ task. Currently, no x86 target allows or supports global
+ watchpoints; however, if any target would want that in the
+ future, GDB should probably provide a command to control whether
+ to enable watchpoints globally or locally, and the code below
+ should use global or local enable and slow-down flags as
+ appropriate. */
+ X86_DR_LOCAL_ENABLE (state, i);
+ state->dr_control_mirror |= DR_LOCAL_SLOWDOWN;
+ state->dr_control_mirror &= X86_DR_CONTROL_MASK;
+
+ return 0;
+}
+
+/* Remove a watchpoint at address ADDR, which is assumed to be aligned
+ according to the length of the region to watch. LEN_RW_BITS is the
+ value of the bits from DR7 which describes the length and access
+ type of the region watched by this watchpoint. Return 0 on
+ success, -1 on failure. */
+
+static int
+x86_remove_aligned_watchpoint (struct x86_debug_reg_state *state,
+ CORE_ADDR addr, unsigned len_rw_bits)
+{
+ int i, retval = -1;
+ int all_vacant = 1;
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (!X86_DR_VACANT (state, i)
+ && state->dr_mirror[i] == addr
+ && X86_DR_GET_RW_LEN (state->dr_control_mirror, i) == len_rw_bits)
+ {
+ if (--state->dr_ref_count[i] == 0) /* No longer in use? */
+ {
+ /* Reset our mirror. */
+ state->dr_mirror[i] = 0;
+ X86_DR_DISABLE (state, i);
+ /* Even though not strictly necessary, clear out all
+ bits in DR_CONTROL related to this debug register.
+ Debug output is clearer when we don't have stale bits
+ in place. This also allows the assertion below. */
+ X86_DR_SET_RW_LEN (state, i, 0);
+ }
+ retval = 0;
+ }
+
+ if (!X86_DR_VACANT (state, i))
+ all_vacant = 0;
+ }
+
+ if (all_vacant)
+ {
+ /* Even though not strictly necessary, clear out all of
+ DR_CONTROL, so that when we have no debug registers in use,
+ we end up with DR_CONTROL == 0. The Linux support relies on
+ this for an optimization. Plus, it makes for clearer debug
+ output. */
+ state->dr_control_mirror &= ~DR_LOCAL_SLOWDOWN;
+
+ gdb_assert (state->dr_control_mirror == 0);
+ }
+ return retval;
+}
+
+/* Insert or remove a (possibly non-aligned) watchpoint, or count the
+ number of debug registers required to watch a region at address
+ ADDR whose length is LEN for accesses of type TYPE. Return 0 on
+ successful insertion or removal, a positive number when queried
+ about the number of registers, or -1 on failure. If WHAT is not a
+ valid value, bombs through internal_error. */
+
+static int
+x86_handle_nonaligned_watchpoint (struct x86_debug_reg_state *state,
+ x86_wp_op_t what, CORE_ADDR addr, int len,
+ enum target_hw_bp_type type)
+{
+ int retval = 0;
+ int max_wp_len = TARGET_HAS_DR_LEN_8 ? 8 : 4;
+
+ static const int size_try_array[8][8] =
+ {
+ {1, 1, 1, 1, 1, 1, 1, 1}, /* Trying size one. */
+ {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size two. */
+ {2, 1, 2, 1, 2, 1, 2, 1}, /* Trying size three. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size four. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size five. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size six. */
+ {4, 1, 2, 1, 4, 1, 2, 1}, /* Trying size seven. */
+ {8, 1, 2, 1, 4, 1, 2, 1}, /* Trying size eight. */
+ };
+
+ while (len > 0)
+ {
+ int align = addr % max_wp_len;
+ /* Four (eight on AMD64) is the maximum length a debug register
+ can watch. */
+ int try = (len > max_wp_len ? (max_wp_len - 1) : len - 1);
+ int size = size_try_array[try][align];
+
+ if (what == WP_COUNT)
+ {
+ /* size_try_array[] is defined such that each iteration
+ through the loop is guaranteed to produce an address and a
+ size that can be watched with a single debug register.
+ Thus, for counting the registers required to watch a
+ region, we simply need to increment the count on each
+ iteration. */
+ retval++;
+ }
+ else
+ {
+ unsigned len_rw = x86_length_and_rw_bits (size, type);
+
+ if (what == WP_INSERT)
+ retval = x86_insert_aligned_watchpoint (state, addr, len_rw);
+ else if (what == WP_REMOVE)
+ retval = x86_remove_aligned_watchpoint (state, addr, len_rw);
+ else
+ internal_error (__FILE__, __LINE__, _("\
+Invalid value %d of operation in x86_handle_nonaligned_watchpoint.\n"),
+ (int) what);
+ if (retval)
+ break;
+ }
+
+ addr += size;
+ len -= size;
+ }
+
+ return retval;
+}
+
+/* Update the inferior debug registers state, in STATE, with the
+ new debug registers state, in NEW_STATE. */
+
+static void
+x86_update_inferior_debug_regs (struct x86_debug_reg_state *state,
+ struct x86_debug_reg_state *new_state)
+{
+ int i;
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (X86_DR_VACANT (new_state, i) != X86_DR_VACANT (state, i))
+ x86_dr_low_set_addr (new_state, i);
+ else
+ gdb_assert (new_state->dr_mirror[i] == state->dr_mirror[i]);
+ }
+
+ if (new_state->dr_control_mirror != state->dr_control_mirror)
+ x86_dr_low_set_control (new_state);
+
+ *state = *new_state;
+}
+
+/* Insert a watchpoint to watch a memory region which starts at
+ address ADDR and whose length is LEN bytes. Watch memory accesses
+ of the type TYPE. Return 0 on success, -1 on failure. */
+
+int
+x86_dr_insert_watchpoint (struct x86_debug_reg_state *state,
+ enum target_hw_bp_type type,
+ CORE_ADDR addr, int len)
+{
+ int retval;
+ /* Work on a local copy of the debug registers, and on success,
+ commit the change back to the inferior. */
+ struct x86_debug_reg_state local_state = *state;
+
+ if (type == hw_read)
+ return 1; /* unsupported */
+
+ if (((len != 1 && len != 2 && len != 4)
+ && !(TARGET_HAS_DR_LEN_8 && len == 8))
+ || addr % len != 0)
+ {
+ retval = x86_handle_nonaligned_watchpoint (&local_state,
+ WP_INSERT,
+ addr, len, type);
+ }
+ else
+ {
+ unsigned len_rw = x86_length_and_rw_bits (len, type);
+
+ retval = x86_insert_aligned_watchpoint (&local_state,
+ addr, len_rw);
+ }
+
+ if (retval == 0)
+ x86_update_inferior_debug_regs (state, &local_state);
+
+ if (show_debug_regs)
+ x86_show_dr (state, "insert_watchpoint", addr, len, type);
+
+ return retval;
+}
+
+/* Remove a watchpoint that watched the memory region which starts at
+ address ADDR, whose length is LEN bytes, and for accesses of the
+ type TYPE. Return 0 on success, -1 on failure. */
+
+int
+x86_dr_remove_watchpoint (struct x86_debug_reg_state *state,
+ enum target_hw_bp_type type,
+ CORE_ADDR addr, int len)
+{
+ int retval;
+ /* Work on a local copy of the debug registers, and on success,
+ commit the change back to the inferior. */
+ struct x86_debug_reg_state local_state = *state;
+
+ if (((len != 1 && len != 2 && len != 4)
+ && !(TARGET_HAS_DR_LEN_8 && len == 8))
+ || addr % len != 0)
+ {
+ retval = x86_handle_nonaligned_watchpoint (&local_state,
+ WP_REMOVE,
+ addr, len, type);
+ }
+ else
+ {
+ unsigned len_rw = x86_length_and_rw_bits (len, type);
+
+ retval = x86_remove_aligned_watchpoint (&local_state,
+ addr, len_rw);
+ }
+
+ if (retval == 0)
+ x86_update_inferior_debug_regs (state, &local_state);
+
+ if (show_debug_regs)
+ x86_show_dr (state, "remove_watchpoint", addr, len, type);
+
+ return retval;
+}
+
+/* Return non-zero if we can watch a memory region that starts at
+ address ADDR and whose length is LEN bytes. */
+
+int
+x86_dr_region_ok_for_watchpoint (struct x86_debug_reg_state *state,
+ CORE_ADDR addr, int len)
+{
+ int nregs;
+
+ /* Compute how many aligned watchpoints we would need to cover this
+ region. */
+ nregs = x86_handle_nonaligned_watchpoint (state, WP_COUNT,
+ addr, len, hw_write);
+ return nregs <= DR_NADDR ? 1 : 0;
+}
+
+/* If the inferior has some break/watchpoint that triggered, set the
+ address associated with that break/watchpoint and return non-zero.
+ Otherwise, return zero. */
+
+int
+x86_dr_stopped_data_address (struct x86_debug_reg_state *state,
+ CORE_ADDR *addr_p)
+{
+ CORE_ADDR addr = 0;
+ int i;
+ int rc = 0;
+ /* The current thread's DR_STATUS. We always need to read this to
+ check whether some watchpoint caused the trap. */
+ unsigned status;
+ /* We need DR_CONTROL as well, but only iff DR_STATUS indicates a
+ data breakpoint trap. Only fetch it when necessary, to avoid an
+ unnecessary extra syscall when no watchpoint triggered. */
+ int control_p = 0;
+ unsigned control = 0;
+
+ /* In non-stop/async, threads can be running while we change the
+ global dr_mirror (and friends). Say, we set a watchpoint, and
+ let threads resume. Now, say you delete the watchpoint, or
+ add/remove watchpoints such that dr_mirror changes while threads
+ are running. On targets that support non-stop,
+ inserting/deleting watchpoints updates the global dr_mirror only.
+ It does not update the real thread's debug registers; that's only
+ done prior to resume. Instead, if threads are running when the
+ mirror changes, a temporary and transparent stop on all threads
+ is forced so they can get their copy of the debug registers
+ updated on re-resume. Now, say, a thread hit a watchpoint before
+ having been updated with the new dr_mirror contents, and we
+ haven't yet handled the corresponding SIGTRAP. If we trusted
+ dr_mirror below, we'd mistake the real trapped address (from the
+ last time we had updated debug registers in the thread) with
+ whatever was currently in dr_mirror. So to fix this, dr_mirror
+ always represents intention, what we _want_ threads to have in
+ debug registers. To get at the address and cause of the trap, we
+ need to read the state the thread still has in its debug
+ registers.
+
+ In sum, always get the current debug register values the current
+ thread has, instead of trusting the global mirror. If the thread
+ was running when we last changed watchpoints, the mirror no
+ longer represents what was set in this thread's debug
+ registers. */
+ status = x86_dr_low_get_status ();
+
+ ALL_DEBUG_REGISTERS (i)
+ {
+ if (!X86_DR_WATCH_HIT (status, i))
+ continue;
+
+ if (!control_p)
+ {
+ control = x86_dr_low_get_control ();
+ control_p = 1;
+ }
+
+ /* This second condition makes sure DRi is set up for a data
+ watchpoint, not a hardware breakpoint. The reason is that
+ GDB doesn't call the target_stopped_data_address method
+ except for data watchpoints. In other words, I'm being
+ paranoiac. */
+ if (X86_DR_GET_RW_LEN (control, i) != 0)
+ {
+ addr = x86_dr_low_get_addr (i);
+ rc = 1;
+ if (show_debug_regs)
+ x86_show_dr (state, "watchpoint_hit", addr, -1, hw_write);
+ }
+ }
+
+ if (show_debug_regs && addr == 0)
+ x86_show_dr (state, "stopped_data_addr", 0, 0, hw_write);
+
+ if (rc)
+ *addr_p = addr;
+ return rc;
+}
+
+/* Return non-zero if the inferior has some watchpoint that triggered.
+ Otherwise return zero. */
+
+int
+x86_dr_stopped_by_watchpoint (struct x86_debug_reg_state *state)
+{
+ CORE_ADDR addr = 0;
+ return x86_dr_stopped_data_address (state, &addr);
+}
new file mode 100644
@@ -0,0 +1,126 @@
+/* Debug register code for x86 (i386 and x86-64).
+
+ Copyright (C) 2009-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+/* Support for hardware watchpoints and breakpoints using the x86
+ debug registers.
+
+ This provides several functions for inserting and removing
+ hardware-assisted breakpoints and watchpoints, testing if one or
+ more of the watchpoints triggered and at what address, checking
+ whether a given region can be watched, etc.
+
+ The functions below implement debug registers sharing by reference
+ counts, and allow to watch regions up to 16 bytes long
+ (32 bytes on 64 bit hosts). */
+
+#ifndef X86_DREGS_H
+#define X86_DREGS_H 1
+
+/* Forward declaration. */
+enum target_hw_bp_type;
+
+/* Low-level function vector. */
+
+struct x86_dr_low_type
+ {
+ /* Set the debug control (DR7) register to a given value for
+ all LWPs. May be NULL if the debug control register cannot
+ be set. */
+ void (*set_control) (unsigned long);
+
+ /* Put an address into one debug register for all LWPs. May
+ be NULL if debug registers cannot be set*/
+ void (*set_addr) (int, CORE_ADDR);
+
+ /* Return the address in a given debug register of the current
+ LWP. */
+ CORE_ADDR (*get_addr) (int);
+
+ /* Return the value of the debug status (DR6) register for
+ current LWP. */
+ unsigned long (*get_status) (void);
+
+ /* Return the value of the debug control (DR7) register for
+ current LWP. */
+ unsigned long (*get_control) (void);
+
+ /* Number of bytes used for debug registers (4 or 8). */
+ int debug_register_length;
+ };
+
+extern struct x86_dr_low_type x86_dr_low;
+
+/* Debug registers' indices. */
+#define DR_FIRSTADDR 0
+#define DR_LASTADDR 3
+#define DR_NADDR 4 /* The number of debug address registers. */
+#define DR_STATUS 6 /* Index of debug status register (DR6). */
+#define DR_CONTROL 7 /* Index of debug control register (DR7). */
+
+/* Global state needed to track h/w watchpoints. */
+
+struct x86_debug_reg_state
+{
+ /* Mirror the inferior's DRi registers. We keep the status and
+ control registers separated because they don't hold addresses.
+ Note that since we can change these mirrors while threads are
+ running, we never trust them to explain a cause of a trap.
+ For that, we need to peek directly in the inferior registers. */
+ CORE_ADDR dr_mirror[DR_NADDR];
+ unsigned dr_status_mirror, dr_control_mirror;
+
+ /* Reference counts for each debug register. */
+ int dr_ref_count[DR_NADDR];
+};
+
+/* A macro to loop over all debug registers. */
+#define ALL_DEBUG_REGISTERS(i) for (i = 0; i < DR_NADDR; i++)
+
+/* Insert a watchpoint to watch a memory region which starts at
+ address ADDR and whose length is LEN bytes. Watch memory accesses
+ of the type TYPE. Return 0 on success, -1 on failure. */
+extern int x86_dr_insert_watchpoint (struct x86_debug_reg_state *state,
+ enum target_hw_bp_type type,
+ CORE_ADDR addr,
+ int len);
+
+/* Remove a watchpoint that watched the memory region which starts at
+ address ADDR, whose length is LEN bytes, and for accesses of the
+ type TYPE. Return 0 on success, -1 on failure. */
+extern int x86_dr_remove_watchpoint (struct x86_debug_reg_state *state,
+ enum target_hw_bp_type type,
+ CORE_ADDR addr,
+ int len);
+
+/* Return non-zero if we can watch a memory region that starts at
+ address ADDR and whose length is LEN bytes. */
+extern int x86_dr_region_ok_for_watchpoint (struct x86_debug_reg_state *state,
+ CORE_ADDR addr, int len);
+
+/* If the inferior has some break/watchpoint that triggered, set the
+ address associated with that break/watchpoint and return true.
+ Otherwise, return false. */
+extern int x86_dr_stopped_data_address (struct x86_debug_reg_state *state,
+ CORE_ADDR *addr_p);
+
+/* Return true if the inferior has some watchpoint that triggered.
+ Otherwise return false. */
+extern int x86_dr_stopped_by_watchpoint (struct x86_debug_reg_state *state);
+
+#endif /* X86_DREGS_H */
@@ -63,7 +63,7 @@
#include "windows-tdep.h"
#include "windows-nat.h"
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "complaints.h"
#include "inf-child.h"
@@ -1910,7 +1910,7 @@ windows_detach (struct target_ops *ops, const char *args, int from_tty)
gdb_flush (gdb_stdout);
}
- i386_cleanup_dregs ();
+ x86_cleanup_dregs ();
inferior_ptid = null_ptid;
detach_inferior (current_event.dwProcessId);
@@ -2361,7 +2361,7 @@ static void
windows_mourn_inferior (struct target_ops *ops)
{
(void) windows_continue (DBG_CONTINUE, -1, 0);
- i386_cleanup_dregs();
+ x86_cleanup_dregs();
if (open_process_used)
{
CHECK (CloseHandle (current_process_handle));
@@ -2593,16 +2593,16 @@ _initialize_windows_nat (void)
t = windows_target ();
- i386_use_watchpoints (t);
+ x86_use_watchpoints (t);
- i386_dr_low.set_control = cygwin_set_dr7;
- i386_dr_low.set_addr = cygwin_set_dr;
- i386_dr_low.get_addr = cygwin_get_dr;
- i386_dr_low.get_status = cygwin_get_dr6;
- i386_dr_low.get_control = cygwin_get_dr7;
+ x86_dr_low.set_control = cygwin_set_dr7;
+ x86_dr_low.set_addr = cygwin_set_dr;
+ x86_dr_low.get_addr = cygwin_get_dr;
+ x86_dr_low.get_status = cygwin_get_dr6;
+ x86_dr_low.get_control = cygwin_get_dr7;
- /* i386_dr_low.debug_register_length field is set by
- calling i386_set_debug_register_length function
+ /* x86_dr_low.debug_register_length field is set by
+ calling x86_set_debug_register_length function
in processor windows specific native file. */
add_target (t);
@@ -25,7 +25,7 @@
#include <sys/user.h>
#include <sys/procfs.h>
-#include "i386-nat.h"
+#include "x86-nat.h"
#include "linux-nat.h"
#ifndef __x86_64__
#include "i386-linux-nat.h"
@@ -179,8 +179,8 @@ x86_linux_prepare_to_resume (struct lwp_info *lwp)
if (lwp->arch_private->debug_registers_changed)
{
- struct i386_debug_reg_state *state
- = i386_debug_reg_state (ptid_get_pid (lwp->ptid));
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (lwp->ptid));
int i;
/* On Linux kernel before 2.6.33 commit
@@ -202,7 +202,7 @@ x86_linux_prepare_to_resume (struct lwp_info *lwp)
/* If we're setting a watchpoint, any change the inferior
had done itself to the debug registers needs to be
- discarded, otherwise, i386_stopped_data_address can get
+ discarded, otherwise, x86_stopped_data_address can get
confused. */
clear_status = 1;
}
@@ -236,8 +236,8 @@ static void
x86_linux_new_fork (struct lwp_info *parent, pid_t child_pid)
{
pid_t parent_pid;
- struct i386_debug_reg_state *parent_state;
- struct i386_debug_reg_state *child_state;
+ struct x86_debug_reg_state *parent_state;
+ struct x86_debug_reg_state *child_state;
/* NULL means no watchpoint has ever been set in the parent. In
that case, there's nothing to do. */
@@ -259,8 +259,8 @@ x86_linux_new_fork (struct lwp_info *parent, pid_t child_pid)
this compatible with older Linux kernels too. */
parent_pid = ptid_get_pid (parent->ptid);
- parent_state = i386_debug_reg_state (parent_pid);
- child_state = i386_debug_reg_state (child_pid);
+ parent_state = x86_debug_reg_state (parent_pid);
+ child_state = x86_debug_reg_state (child_pid);
*child_state = *parent_state;
}
@@ -271,7 +271,7 @@ static void (*super_post_startup_inferior) (struct target_ops *self,
static void
x86_linux_child_post_startup_inferior (struct target_ops *self, ptid_t ptid)
{
- i386_cleanup_dregs ();
+ x86_cleanup_dregs ();
super_post_startup_inferior (self, ptid);
}
@@ -530,13 +530,13 @@ x86_linux_create_target (void)
struct target_ops *t = linux_target ();
/* Initialize the debug register function vectors. */
- i386_use_watchpoints (t);
- i386_dr_low.set_control = x86_linux_dr_set_control;
- i386_dr_low.set_addr = x86_linux_dr_set_addr;
- i386_dr_low.get_addr = x86_linux_dr_get_addr;
- i386_dr_low.get_status = x86_linux_dr_get_status;
- i386_dr_low.get_control = x86_linux_dr_get_control;
- i386_set_debug_register_length (sizeof (void *));
+ x86_use_watchpoints (t);
+ x86_dr_low.set_control = x86_linux_dr_set_control;
+ x86_dr_low.set_addr = x86_linux_dr_set_addr;
+ x86_dr_low.get_addr = x86_linux_dr_get_addr;
+ x86_dr_low.get_status = x86_linux_dr_get_status;
+ x86_dr_low.get_control = x86_linux_dr_get_control;
+ x86_set_debug_register_length (sizeof (void *));
/* Override the GNU/Linux inferior startup hook. */
super_post_startup_inferior = t->to_post_startup_inferior;
@@ -563,6 +563,6 @@ x86_linux_add_target (struct target_ops *t)
linux_nat_add_target (t);
linux_nat_set_new_thread (t, x86_linux_new_thread);
linux_nat_set_new_fork (t, x86_linux_new_fork);
- linux_nat_set_forget_process (t, i386_forget_process);
+ linux_nat_set_forget_process (t, x86_forget_process);
linux_nat_set_prepare_to_resume (t, x86_linux_prepare_to_resume);
}
new file mode 100644
@@ -0,0 +1,313 @@
+/* Native-dependent code for x86 (i386 and x86-64).
+
+ Copyright (C) 2001-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "defs.h"
+#include "x86-nat.h"
+#include "gdbcmd.h"
+#include "inferior.h"
+
+/* Support for hardware watchpoints and breakpoints using the x86
+ debug registers.
+
+ This provides several functions for inserting and removing
+ hardware-assisted breakpoints and watchpoints, testing if one or
+ more of the watchpoints triggered and at what address, checking
+ whether a given region can be watched, etc.
+
+ The functions below implement debug registers sharing by reference
+ counts, and allow to watch regions up to 16 bytes long. */
+
+/* Low-level function vector. */
+struct x86_dr_low_type x86_dr_low;
+
+/* Per-process data. We don't bind this to a per-inferior registry
+ because of targets like x86 GNU/Linux that need to keep track of
+ processes that aren't bound to any inferior (e.g., fork children,
+ checkpoints). */
+
+struct x86_process_info
+{
+ /* Linked list. */
+ struct x86_process_info *next;
+
+ /* The process identifier. */
+ pid_t pid;
+
+ /* Copy of x86 hardware debug registers. */
+ struct x86_debug_reg_state state;
+};
+
+static struct x86_process_info *x86_process_list = NULL;
+
+/* Find process data for process PID. */
+
+static struct x86_process_info *
+x86_find_process_pid (pid_t pid)
+{
+ struct x86_process_info *proc;
+
+ for (proc = x86_process_list; proc; proc = proc->next)
+ if (proc->pid == pid)
+ return proc;
+
+ return NULL;
+}
+
+/* Add process data for process PID. Returns newly allocated info
+ object. */
+
+static struct x86_process_info *
+x86_add_process (pid_t pid)
+{
+ struct x86_process_info *proc;
+
+ proc = xcalloc (1, sizeof (*proc));
+ proc->pid = pid;
+
+ proc->next = x86_process_list;
+ x86_process_list = proc;
+
+ return proc;
+}
+
+/* Get data specific info for process PID, creating it if necessary.
+ Never returns NULL. */
+
+static struct x86_process_info *
+x86_process_info_get (pid_t pid)
+{
+ struct x86_process_info *proc;
+
+ proc = x86_find_process_pid (pid);
+ if (proc == NULL)
+ proc = x86_add_process (pid);
+
+ return proc;
+}
+
+/* Get debug registers state for process PID. */
+
+struct x86_debug_reg_state *
+x86_debug_reg_state (pid_t pid)
+{
+ return &x86_process_info_get (pid)->state;
+}
+
+/* See declaration in i386-nat.h. */
+
+void
+x86_forget_process (pid_t pid)
+{
+ struct x86_process_info *proc, **proc_link;
+
+ proc = x86_process_list;
+ proc_link = &x86_process_list;
+
+ while (proc != NULL)
+ {
+ if (proc->pid == pid)
+ {
+ *proc_link = proc->next;
+
+ xfree (proc);
+ return;
+ }
+
+ proc_link = &proc->next;
+ proc = *proc_link;
+ }
+}
+
+/* Clear the reference counts and forget everything we knew about the
+ debug registers. */
+
+void
+x86_cleanup_dregs (void)
+{
+ /* Starting from scratch has the same effect. */
+ x86_forget_process (ptid_get_pid (inferior_ptid));
+}
+
+/* Insert a watchpoint to watch a memory region which starts at
+ address ADDR and whose length is LEN bytes. Watch memory accesses
+ of the type TYPE. Return 0 on success, -1 on failure. */
+
+static int
+x86_insert_watchpoint (struct target_ops *self,
+ CORE_ADDR addr, int len, int type,
+ struct expression *cond)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_insert_watchpoint (state, type, addr, len);
+}
+
+/* Remove a watchpoint that watched the memory region which starts at
+ address ADDR, whose length is LEN bytes, and for accesses of the
+ type TYPE. Return 0 on success, -1 on failure. */
+static int
+x86_remove_watchpoint (struct target_ops *self,
+ CORE_ADDR addr, int len, int type,
+ struct expression *cond)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_remove_watchpoint (state, type, addr, len);
+}
+
+/* Return non-zero if we can watch a memory region that starts at
+ address ADDR and whose length is LEN bytes. */
+
+static int
+x86_region_ok_for_watchpoint (struct target_ops *self,
+ CORE_ADDR addr, int len)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_region_ok_for_watchpoint (state, addr, len);
+}
+
+/* If the inferior has some break/watchpoint that triggered, set the
+ address associated with that break/watchpoint and return non-zero.
+ Otherwise, return zero. */
+
+static int
+x86_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_stopped_data_address (state, addr_p);
+}
+
+/* Return non-zero if the inferior has some watchpoint that triggered.
+ Otherwise return zero. */
+
+static int
+x86_stopped_by_watchpoint (struct target_ops *ops)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_stopped_by_watchpoint (state);
+}
+
+/* Insert a hardware-assisted breakpoint at BP_TGT->placed_address.
+ Return 0 on success, EBUSY on failure. */
+
+static int
+x86_insert_hw_breakpoint (struct target_ops *self, struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_insert_watchpoint (state, hw_execute,
+ bp_tgt->placed_address, 1) ? EBUSY : 0;
+}
+
+/* Remove a hardware-assisted breakpoint at BP_TGT->placed_address.
+ Return 0 on success, -1 on failure. */
+
+static int
+x86_remove_hw_breakpoint (struct target_ops *self, struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
+{
+ struct x86_debug_reg_state *state
+ = x86_debug_reg_state (ptid_get_pid (inferior_ptid));
+
+ return x86_dr_remove_watchpoint (state, hw_execute,
+ bp_tgt->placed_address, 1);
+}
+
+/* Returns the number of hardware watchpoints of type TYPE that we can
+ set. Value is positive if we can set CNT watchpoints, zero if
+ setting watchpoints of type TYPE is not supported, and negative if
+ CNT is more than the maximum number of watchpoints of type TYPE
+ that we can support. TYPE is one of bp_hardware_watchpoint,
+ bp_read_watchpoint, bp_write_watchpoint, or bp_hardware_breakpoint.
+ CNT is the number of such watchpoints used so far (including this
+ one). OTHERTYPE is non-zero if other types of watchpoints are
+ currently enabled.
+
+ We always return 1 here because we don't have enough information
+ about possible overlap of addresses that they want to watch. As an
+ extreme example, consider the case where all the watchpoints watch
+ the same address and the same region length: then we can handle a
+ virtually unlimited number of watchpoints, due to debug register
+ sharing implemented via reference counts in i386-nat.c. */
+
+static int
+x86_can_use_hw_breakpoint (struct target_ops *self,
+ int type, int cnt, int othertype)
+{
+ return 1;
+}
+
+static void
+add_show_debug_regs_command (void)
+{
+ /* A maintenance command to enable printing the internal DRi mirror
+ variables. */
+ add_setshow_boolean_cmd ("show-debug-regs", class_maintenance,
+ &show_debug_regs, _("\
+Set whether to show variables that mirror the x86 debug registers."), _("\
+Show whether to show variables that mirror the x86 debug registers."), _("\
+Use \"on\" to enable, \"off\" to disable.\n\
+If enabled, the debug registers values are shown when GDB inserts\n\
+or removes a hardware breakpoint or watchpoint, and when the inferior\n\
+triggers a breakpoint or watchpoint."),
+ NULL,
+ NULL,
+ &maintenance_set_cmdlist,
+ &maintenance_show_cmdlist);
+}
+
+/* There are only two global functions left. */
+
+void
+x86_use_watchpoints (struct target_ops *t)
+{
+ /* After a watchpoint trap, the PC points to the instruction after the
+ one that caused the trap. Therefore we don't need to step over it.
+ But we do need to reset the status register to avoid another trap. */
+ t->to_have_continuable_watchpoint = 1;
+
+ t->to_can_use_hw_breakpoint = x86_can_use_hw_breakpoint;
+ t->to_region_ok_for_hw_watchpoint = x86_region_ok_for_watchpoint;
+ t->to_stopped_by_watchpoint = x86_stopped_by_watchpoint;
+ t->to_stopped_data_address = x86_stopped_data_address;
+ t->to_insert_watchpoint = x86_insert_watchpoint;
+ t->to_remove_watchpoint = x86_remove_watchpoint;
+ t->to_insert_hw_breakpoint = x86_insert_hw_breakpoint;
+ t->to_remove_hw_breakpoint = x86_remove_hw_breakpoint;
+}
+
+void
+x86_set_debug_register_length (int len)
+{
+ /* This function should be called only once for each native target. */
+ gdb_assert (x86_dr_low.debug_register_length == 0);
+ gdb_assert (len == 4 || len == 8);
+ x86_dr_low.debug_register_length = len;
+ add_show_debug_regs_command ();
+}
new file mode 100644
@@ -0,0 +1,57 @@
+/* Native-dependent code for x86 (i386 and x86-64).
+
+ Low level functions to implement Oeprating System specific
+ code to manipulate x86 debug registers.
+
+ Copyright (C) 2009-2014 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef X86_NAT_H
+#define X86_NAT_H 1
+
+#include "nat/x86-dregs.h"
+
+/* Hardware-assisted breakpoints and watchpoints. */
+
+/* Add watchpoint methods to the provided target_ops.
+ Targets using x86 family debug registers for watchpoints should call
+ this. */
+struct target_ops;
+extern void x86_use_watchpoints (struct target_ops *);
+
+/* Use this function to set x86_dr_low debug_register_length field
+ rather than setting it directly to check that the length is only
+ set once. It also enables the 'maint set/show show-debug-regs'
+ command. */
+
+extern void x86_set_debug_register_length (int len);
+
+/* Use this function to reset the x86-nat.c debug register state. */
+
+extern void x86_cleanup_dregs (void);
+
+/* Return a pointer to the local mirror of the debug registers of
+ process PID. */
+
+extern struct x86_debug_reg_state *x86_debug_reg_state (pid_t pid);
+
+/* Called whenever GDB is no longer debugging process PID. It deletes
+ data structures that keep track of debug register state. */
+
+extern void x86_forget_process (pid_t pid);
+
+#endif /* X86_NAT_H */