[committed] Convert H8 port to LRA
Checks
Context |
Check |
Description |
linaro-tcwg-bot/tcwg_gcc_check--master-aarch64 |
success
|
Testing passed
|
linaro-tcwg-bot/tcwg_gcc_build--master-arm |
success
|
Testing passed
|
linaro-tcwg-bot/tcwg_gcc_build--master-aarch64 |
success
|
Testing passed
|
linaro-tcwg-bot/tcwg_gcc_check--master-arm |
success
|
Testing passed
|
Commit Message
With Vlad's recent LRA fix to the elimination code, the H8 can be
converted to LRA.
This patch has two changes of note.
First, this turns Zz into a standard constraint. This helps reloading
for the H8/SX movqi pattern.
Second, this drops the whole pattern for the SX bit memory operations.
I can't see why those exist to begin with. They should be handled by
the standard bit manipulation patterns. If someone wants to try and
improve SX bit support, that'd be great and they can do so within the
LRA framework :-)
Pushed to the trunk...
Jeff
commit f66e0a94ad7bc18538c8207fc2c86b62e4a51bb2
Author: Jeff Law <jlaw@ventanamicro.com>
Date: Sun Jun 4 11:38:55 2023 -0600
Convert H8 port to LRA
With Vlad's recent LRA fix to the elimination code, the H8 can be converted
to LRA.
This patch has two changes of note.
First, this turns Zz into a standard constraint. This helps reloading for
the H8/SX movqi pattern.
Second, this drops the whole pattern for the SX bit memory operations. I
can't see why those exist to begin with. They should be handled by the
standard bit manipulation patterns. If someone wants to try and improve SX
bit support, that'd be great and they can do so within the LRA framework :-)
Pushed to the trunk...
gcc/
* config/h8300/constraints.md (Zz): Make this a normal
constraint.
* config/h8300/h8300.cc (TARGET_LRA_P): Remove.
* config/h8300/logical.md (H8/SX bit patterns): Remove.
Comments
On Sun, Jun 4, 2023 at 10:43 AM Jeff Law via Gcc-patches
<gcc-patches@gcc.gnu.org> wrote:
>
> With Vlad's recent LRA fix to the elimination code, the H8 can be
> converted to LRA.
Could you update the h8300 entry on https://gcc.gnu.org/backends.html
for this change?
Thanks,
Andrew
>
> This patch has two changes of note.
>
> First, this turns Zz into a standard constraint. This helps reloading
> for the H8/SX movqi pattern.
>
> Second, this drops the whole pattern for the SX bit memory operations.
> I can't see why those exist to begin with. They should be handled by
> the standard bit manipulation patterns. If someone wants to try and
> improve SX bit support, that'd be great and they can do so within the
> LRA framework :-)
>
> Pushed to the trunk...
>
> Jeff
On 6/7/23 08:06, Andrew Pinski wrote:
> On Sun, Jun 4, 2023 at 10:43 AM Jeff Law via Gcc-patches
> <gcc-patches@gcc.gnu.org> wrote:
>>
>> With Vlad's recent LRA fix to the elimination code, the H8 can be
>> converted to LRA.
>
> Could you update the h8300 entry on https://gcc.gnu.org/backends.html
> for this change?
Thanks for the reminder. I also updated the state for the ports I
converted several weeks back.
jeff
@@ -211,7 +211,7 @@ (define_constraint "Y2"
(and (match_code "const_int")
(match_test "exact_log2 (ival & 0xff) != -1")))
-(define_special_memory_constraint "Zz"
+(define_constraint "Zz"
"@internal"
(and (match_test "TARGET_H8300SX")
(match_code "mem")
@@ -5625,9 +5625,6 @@ pre_incdec_with_reg (rtx op, unsigned int reg)
#undef TARGET_MODES_TIEABLE_P
#define TARGET_MODES_TIEABLE_P h8300_modes_tieable_p
-#undef TARGET_LRA_P
-#define TARGET_LRA_P hook_bool_void_false
-
#undef TARGET_LEGITIMATE_ADDRESS_P
#define TARGET_LEGITIMATE_ADDRESS_P h8300_legitimate_address_p
@@ -31,28 +31,6 @@ (define_expand "<code><mode>3"
;; AND INSTRUCTIONS
;; ----------------------------------------------------------------------
-(define_insn "bclr<mode>_msx"
- [(set (match_operand:QHI 0 "bit_register_indirect_operand" "=WU")
- (and:QHI (match_operand:QHI 1 "bit_register_indirect_operand" "%0")
- (match_operand:QHI 2 "single_zero_operand" "Y0")))]
- "TARGET_H8300SX && rtx_equal_p (operands[0], operands[1])"
- "bclr\\t%W2,%0"
- [(set_attr "length" "8")])
-
-(define_split
- [(set (match_operand:HI 0 "bit_register_indirect_operand")
- (and:HI (match_operand:HI 1 "bit_register_indirect_operand")
- (match_operand:HI 2 "single_zero_operand")))]
- "TARGET_H8300SX && abs (INTVAL (operands[2])) > 0xff"
- [(set (match_dup 0)
- (and:QI (match_dup 1)
- (match_dup 2)))]
- {
- operands[0] = adjust_address (operands[0], QImode, 0);
- operands[1] = adjust_address (operands[1], QImode, 0);
- operands[2] = GEN_INT ((INTVAL (operands[2])) >> 8);
- })
-
(define_insn_and_split "*andqi3_2"
[(set (match_operand:QI 0 "bit_operand" "=U,rQ,r")
(and:QI (match_operand:QI 1 "bit_operand" "%0,0,WU")
@@ -177,14 +155,6 @@ (define_insn "*andorsi3_shift_8_clobber_flags"
;; OR/XOR INSTRUCTIONS
;; ----------------------------------------------------------------------
-(define_insn "b<code><mode>_msx"
- [(set (match_operand:QHI 0 "bit_register_indirect_operand" "=WU")
- (ors:QHI (match_operand:QHI 1 "bit_register_indirect_operand" "%0")
- (match_operand:QHI 2 "single_one_operand" "Y2")))]
- "TARGET_H8300SX && rtx_equal_p (operands[0], operands[1])"
- { return <CODE> == IOR ? "bset\\t%V2,%0" : "bnot\\t%V2,%0"; }
- [(set_attr "length" "8")])
-
(define_insn_and_split "<code>qi3_1"
[(set (match_operand:QI 0 "bit_operand" "=U,rQ")
(ors:QI (match_operand:QI 1 "bit_operand" "%0,0")