libgcc: Use may_alias attribute in bitint handlers

  Hi!

As discussed on IRC, the following patch uses may_alias attribute, so that
on targets like aarch64 where abi_limb_mode != limb_mode the library
accesses the limbs (half limbs of the ABI) in the arrays with conservative
alias set.

So far tested on x86_64-linux with
make check-gcc check-g++ -j32 -k GCC_TEST_RUN_EXPENSIVE=1 RUNTESTFLAGS="GCC_TEST_RUN_EXPENSIVE=1 dg.exp='*bitint* pr112673.c builtin-stdc-bit-*.c pr112566-2.c pr112511.c' dg-torture.exp=*bitint* dfp.exp=*bitint*"
Ok for trunk if it passes full bootstrap/regtest?

2024-01-11  Jakub Jelinek  <jakub@redhat.com>

	* libgcc2.h (UBILtype): New typedef with may_alias attribute.
	(__mulbitint3, __divmodbitint4): Use UBILtype * instead of
	UWtype * and const UBILtype * instead of const UWtype *.
	* libgcc2.c (bitint_reduce_prec, bitint_mul_1, bitint_addmul_1,
	__mulbitint3, bitint_negate, bitint_submul_1, __divmodbitint4):
	Likewise.
	* soft-fp/bitint.h (UBILtype): Change define into a typedef with
	may_alias attribute.


	Jakub
  

On Thu, 11 Jan 2024, Jakub Jelinek wrote:

> Hi!
> 
> As discussed on IRC, the following patch uses may_alias attribute, so that
> on targets like aarch64 where abi_limb_mode != limb_mode the library
> accesses the limbs (half limbs of the ABI) in the arrays with conservative
> alias set.
> 
> So far tested on x86_64-linux with
> make check-gcc check-g++ -j32 -k GCC_TEST_RUN_EXPENSIVE=1 RUNTESTFLAGS="GCC_TEST_RUN_EXPENSIVE=1 dg.exp='*bitint* pr112673.c builtin-stdc-bit-*.c pr112566-2.c pr112511.c' dg-torture.exp=*bitint* dfp.exp=*bitint*"
> Ok for trunk if it passes full bootstrap/regtest?

OK.

Richard.

> 2024-01-11  Jakub Jelinek  <jakub@redhat.com>
> 
> 	* libgcc2.h (UBILtype): New typedef with may_alias attribute.
> 	(__mulbitint3, __divmodbitint4): Use UBILtype * instead of
> 	UWtype * and const UBILtype * instead of const UWtype *.
> 	* libgcc2.c (bitint_reduce_prec, bitint_mul_1, bitint_addmul_1,
> 	__mulbitint3, bitint_negate, bitint_submul_1, __divmodbitint4):
> 	Likewise.
> 	* soft-fp/bitint.h (UBILtype): Change define into a typedef with
> 	may_alias attribute.
> 
> --- libgcc/libgcc2.h.jj	2024-01-03 12:07:28.134370411 +0100
> +++ libgcc/libgcc2.h	2024-01-11 08:42:02.417235956 +0100
> @@ -402,10 +402,12 @@ extern UDWtype __udivmoddi4 (UDWtype, UD
>  #if (defined(__BITINT_MAXWIDTH__) \
>       && (defined(L_mulbitint3) || defined(L_divmodbitint4)))
>  /* _BitInt support.  */
> -extern void __mulbitint3 (UWtype *, SItype, const UWtype *, SItype,
> -			  const UWtype *, SItype);
> -extern void __divmodbitint4 (UWtype *, SItype, UWtype *, SItype,
> -			     const UWtype *, SItype, const UWtype *, SItype);
> +typedef UWtype __attribute__((__may_alias__)) UBILtype;
> +extern void __mulbitint3 (UBILtype *, SItype, const UBILtype *, SItype,
> +			  const UBILtype *, SItype);
> +extern void __divmodbitint4 (UBILtype *, SItype, UBILtype *, SItype,
> +			     const UBILtype *, SItype, const UBILtype *,
> +			     SItype);
>  #endif
>  
>  /* __negdi2 is static inline when building other libgcc2 portions.  */
> --- libgcc/libgcc2.c.jj	2024-01-03 12:07:29.323353753 +0100
> +++ libgcc/libgcc2.c	2024-01-11 08:44:56.260727411 +0100
> @@ -1309,7 +1309,7 @@ __udivdi3 (UDWtype n, UDWtype d)
>     some narrower _BitInt value, reduce precision.  */
>  
>  static inline __attribute__((__always_inline__)) SItype
> -bitint_reduce_prec (const UWtype **p, SItype prec)
> +bitint_reduce_prec (const UBILtype **p, SItype prec)
>  {
>    UWtype mslimb;
>    SItype i;
> @@ -1421,7 +1421,7 @@ bitint_reduce_prec (const UWtype **p, SI
>  /* D = S * L.  */
>  
>  static UWtype
> -bitint_mul_1 (UWtype *d, const UWtype *s, UWtype l, SItype n)
> +bitint_mul_1 (UBILtype *d, const UBILtype *s, UWtype l, SItype n)
>  {
>    UWtype sv, hi, lo, c = 0;
>    do
> @@ -1440,7 +1440,7 @@ bitint_mul_1 (UWtype *d, const UWtype *s
>  /* D += S * L.  */
>  
>  static UWtype
> -bitint_addmul_1 (UWtype *d, const UWtype *s, UWtype l, SItype n)
> +bitint_addmul_1 (UBILtype *d, const UBILtype *s, UWtype l, SItype n)
>  {
>    UWtype sv, hi, lo, c = 0;
>    do
> @@ -1465,9 +1465,9 @@ bitint_addmul_1 (UWtype *d, const UWtype
>     positive.  */
>  
>  void
> -__mulbitint3 (UWtype *ret, SItype retprec,
> -	      const UWtype *u, SItype uprec,
> -	      const UWtype *v, SItype vprec)
> +__mulbitint3 (UBILtype *ret, SItype retprec,
> +	      const UBILtype *u, SItype uprec,
> +	      const UBILtype *v, SItype vprec)
>  {
>    uprec = bitint_reduce_prec (&u, uprec);
>    vprec = bitint_reduce_prec (&v, vprec);
> @@ -1480,7 +1480,7 @@ __mulbitint3 (UWtype *ret, SItype retpre
>        || (avprec > auprec && !(uprec >= 0 && vprec < 0)))
>      {
>        SItype p;
> -      const UWtype *t;
> +      const UBILtype *t;
>        p = uprec; uprec = vprec; vprec = p;
>        p = auprec; auprec = avprec; avprec = p;
>        t = u; u = v; v = t;
> @@ -1643,7 +1643,7 @@ __mulbitint3 (UWtype *ret, SItype retpre
>  /* D = -S.  */
>  
>  static void
> -bitint_negate (UWtype *d, const UWtype *s, SItype n)
> +bitint_negate (UBILtype *d, const UBILtype *s, SItype n)
>  {
>    UWtype c = 1;
>    do
> @@ -1660,7 +1660,7 @@ bitint_negate (UWtype *d, const UWtype *
>  /* D -= S * L.  */
>  
>  static UWtype
> -bitint_submul_1 (UWtype *d, const UWtype *s, UWtype l, SItype n)
> +bitint_submul_1 (UBILtype *d, const UBILtype *s, UWtype l, SItype n)
>  {
>    UWtype sv, hi, lo, c = 0;
>    do
> @@ -1687,10 +1687,10 @@ bitint_submul_1 (UWtype *d, const UWtype
>     should be 0.  */
>  
>  void
> -__divmodbitint4 (UWtype *q, SItype qprec,
> -		 UWtype *r, SItype rprec,
> -		 const UWtype *u, SItype uprec,
> -		 const UWtype *v, SItype vprec)
> +__divmodbitint4 (UBILtype *q, SItype qprec,
> +		 UBILtype *r, SItype rprec,
> +		 const UBILtype *u, SItype uprec,
> +		 const UBILtype *v, SItype vprec)
>  {
>    uprec = bitint_reduce_prec (&u, uprec);
>    vprec = bitint_reduce_prec (&v, vprec);
> @@ -1747,7 +1747,7 @@ __divmodbitint4 (UWtype *q, SItype qprec
>    if (qn >= qn2)
>      qn2 = 0;
>    USItype sz = un + 1 + vn + qn2;
> -  UWtype *buf = __builtin_alloca (sz * sizeof (UWtype));
> +  UBILtype *buf = __builtin_alloca (sz * sizeof (UWtype));
>    USItype uidx, vidx;
>  #if __LIBGCC_BITINT_ORDER__ == __ORDER_BIG_ENDIAN__
>    uidx = un - 1;
> @@ -1768,9 +1768,9 @@ __divmodbitint4 (UWtype *q, SItype qprec
>      __builtin_memcpy (buf + un + 1, v, vn * sizeof (UWtype));
>    if (vp)
>      buf[un + 1 + BITINT_END (0, vn - 1)] &= (((UWtype) 1 << vp) - 1);
> -  UWtype *u2 = buf;
> -  UWtype *v2 = u2 + un + 1;
> -  UWtype *q2 = v2 + vn;
> +  UBILtype *u2 = buf;
> +  UBILtype *v2 = u2 + un + 1;
> +  UBILtype *q2 = v2 + vn;
>    if (!qn2)
>      q2 = q + BITINT_END (qn - (un - vn + 1), 0);
>  
> --- libgcc/soft-fp/bitint.h.jj	2023-09-06 17:42:14.501093073 +0200
> +++ libgcc/soft-fp/bitint.h	2024-01-11 08:39:09.590746494 +0100
> @@ -33,19 +33,19 @@ see the files COPYING3 and COPYING.RUNTI
>  #if BIL_UNITS_PER_WORD == 8
>  #define BIL_TYPE_SIZE (8 * __CHAR_BIT__)
>  #define BILtype		DItype
> -#define UBILtype	UDItype
> +typedef UDItype __attribute__ ((__may_alias__)) UBILtype;
>  #elif BIL_UNITS_PER_WORD == 4
>  #define BIL_TYPE_SIZE (4 * __CHAR_BIT__)
>  #define BILtype		SItype
> -#define UBILtype	USItype
> +typedef USItype __attribute__ ((__may_alias__)) UBILtype;
>  #elif BIL_UNITS_PER_WORD == 2
>  #define BIL_TYPE_SIZE (2 * __CHAR_BIT__)
>  #define BILtype		HItype
> -#define UBILtype	UHItype
> +typedef UHItype __attribute__ ((__may_alias__)) UBILtype;
>  #else
>  #define BIL_TYPE_SIZE __CHAR_BIT__
>  #define BILtype		QItype
> -#define UBILtype	UQItype
> +typedef UQItype __attribute__ ((__may_alias__)) UBILtype;
>  #endif
>  
>  /* If *P is zero or sign extended (the latter only for PREC < 0) from
> 
> 	Jakub
> 
>