@@ -20,7 +20,7 @@
#define SP_ALIGN_MASK ~15
-/* Size of an X regiser in bytes. */
+/* Size of an X register in bytes. */
#define SZREG 8
/* Size of a V register in bytes. */
@@ -44,7 +44,7 @@ weak_alias (__getcontext, getcontext)
/* An internal routine used by getcontext and setcontext.
- The incomming return address register is $0. */
+ The incoming return address register is $0. */
.align 4
.globl __getcontext_x
@@ -95,7 +95,7 @@ asm(".arch ev56");
#define TSUNAMI_DENSE_MEM (0x80000000000UL)
/* Polaris has SPARSE space, but we prefer to use only DENSE
- because of some idiosyncracies in actually using SPARSE. */
+ because of some idiosyncrasies in actually using SPARSE. */
#define POLARIS_IO_BASE (0xf9fc000000UL)
#define POLARIS_DENSE_MEM (0xf900000000UL)
@@ -31,5 +31,5 @@
typedef unsigned long int elf_greg_t;
typedef unsigned long int elf_gregset_t[ELF_NGREG];
-/* There's no seperate floating point reg file in ARCv2. */
+/* There's no separate floating point reg file in ARCv2. */
typedef struct { } elf_fpregset_t;
@@ -43,7 +43,7 @@ ENTRY (__clone)
bz L (__sys_err)
/* save some of the orig args
- r0 containg @fn will be clobbered AFTER syscall (with ret val)
+ r0 containing @fn will be clobbered AFTER syscall (with ret val)
rest are clobbered BEFORE syscall due to different arg ordering. */
mov r10, r0 /* @fn. */
mov r11, r3 /* @args. */
@@ -182,11 +182,11 @@ hidden_proto (__syscall_error)
__ret = (long int) (arg1); \
LOAD_ARGS_0 (nm, arg1)
-/* Note that the use of _tmpX might look superflous, however it is needed
+/* Note that the use of _tmpX might look superfluous, however it is needed
to ensure that register variables are not clobbered if arg happens to be
a function call itself. e.g. sched_setaffinity() calling getpid() for arg2
Also this specific order of recursive calling is important to segregate
- the tmp args evaluation (function call case described above) and assigment
+ the tmp args evaluation (function call case described above) and assignment
of register variables. */
# define LOAD_ARGS_2(nm, arg1, arg2) \
@@ -28,7 +28,7 @@
to store the child thread ID at its locationm, to erase it in child memory
when the child exits, and do a wakeup on the futex at that address.
- The architecture with non-default kernel abi semantic should correctlly
+ The architecture with non-default kernel abi semantic should correctly
override it with one of the supported calling convention (check generic
kernel-features.h for the clone abi variants). */
static inline pid_t
@@ -73,7 +73,7 @@
/* We have no predefined limit on the number of threads. */
#undef PTHREAD_THREADS_MAX
-/* Maximum amount by which a process can descrease its asynchronous I/O
+/* Maximum amount by which a process can decrease its asynchronous I/O
priority level. */
#define AIO_PRIO_DELTA_MAX 20
@@ -78,7 +78,7 @@
# define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages. */
# define MADV_HUGEPAGE 14 /* Worth backing with hugepages. */
# define MADV_NOHUGEPAGE 15 /* Not worth backing with hugepages. */
-# define MADV_DONTDUMP 16 /* Explicity exclude from the core dump,
+# define MADV_DONTDUMP 16 /* Explicitly exclude from the core dump,
overrides the coredump filter bits. */
# define MADV_DODUMP 17 /* Clear the MADV_DONTDUMP flag. */
# define MADV_WIPEONFORK 18 /* Zero memory on fork, child only. */
@@ -84,7 +84,7 @@
/* We support user-defined stacks. */
#define _POSIX_THREAD_ATTR_STACKADDR 200809L
-/* We support priority inheritence. */
+/* We support priority inheritance. */
#define _POSIX_THREAD_PRIO_INHERIT 200809L
/* We support priority protection, though only for non-robust
@@ -92,7 +92,7 @@
#define _POSIX_THREAD_PRIO_PROTECT 200809L
#ifdef __USE_XOPEN2K8
-/* We support priority inheritence for robust mutexes. */
+/* We support priority inheritance for robust mutexes. */
# define _POSIX_THREAD_ROBUST_PRIO_INHERIT 200809L
/* We do not support priority protection for robust mutexes. */
@@ -143,7 +143,7 @@ enum
{
BUS_ADRALN = 1, /* Invalid address alignment. */
# define BUS_ADRALN BUS_ADRALN
- BUS_ADRERR, /* Non-existant physical address. */
+ BUS_ADRERR, /* Non-existent physical address. */
# define BUS_ADRERR BUS_ADRERR
BUS_OBJERR, /* Object specific hardware error. */
# define BUS_OBJERR BUS_OBJERR
@@ -1,4 +1,4 @@
-/* termios tcflag symbolic contants definitions. Linux/generic version.
+/* termios tcflag symbolic constant definitions. Linux/generic version.
Copyright (C) 2019-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
@@ -36,7 +36,7 @@ print_auxv (void)
|| av->a_type == AT_PLATFORM
|| av->a_type == AT_BASE_PLATFORM)
/* The address of the strings is not useful at all, so print
- the strings themselvs. */
+ the strings themselves. */
_dl_diagnostics_print_string ((const char *) av->a_un.a_val);
else
_dl_printf ("0x%lx", (unsigned long int) av->a_un.a_val);
@@ -20,7 +20,7 @@
and shared (rtld) modes:
1. PROCINFO_DECL is defined, meaning we are only interested in
- declarations. For static it requires use the extern keywork along with
+ declarations. For static it requires use the extern keyword along with
the attribute_relro while for shared it will be embedded in the
rtld_global_ro.
@@ -32,7 +32,7 @@ def extract_system_call_name(macro):
else:
raise ValueError('invalid system call name: {!r}'.format(macro))
-# Matches macros for systme call names.
+# Matches macros for system call names.
RE_SYSCALL = re.compile('__NR_.*')
# Some __NR_ constants are not real
@@ -54,7 +54,7 @@ def kernel_constants(cc):
return {extract_system_call_name(name) : int(value)
for name, value in glibcextract.compute_macro_consts(
'#include <asm/unistd.h>\n'
- # Regularlize the kernel definitions if necessary.
+ # Regularize the kernel definitions if necessary.
'#include <fixup-asm-unistd.h>',
cc, macro_re=RE_SYSCALL, exclude_re=RE_PSEUDO_SYSCALL)
.items()}
@@ -51,7 +51,7 @@
Return:
- On success the thread ID of the child process is returend in
+ On success the thread ID of the child process is returned in
the callers context.
On error return -1, and set errno to the value returned by
the syscall.
@@ -53,7 +53,7 @@
#define LOAD_PIC(LREG) \
copy LREG , %r19
/* Inline assembly defines */
-#define TREG_ASM "%r4" /* Cant clobber r3, it holds framemarker */
+#define TREG_ASM "%r4" /* Can't clobber r3, it holds framemarker */
#define SAVE_ASM_PIC " copy %%r19, %" TREG_ASM "\n"
#define LOAD_ASM_PIC " copy %" TREG_ASM ", %%r19\n"
#define CLOB_TREG TREG_ASM ,
@@ -134,7 +134,7 @@
/* SAVE_RP says we do */ ASM_LINE_SEP \
stw %rp, -20(%sr0,%sp) ASM_LINE_SEP \
.cfi_offset 2, -20 ASM_LINE_SEP \
- /*FIXME: Call mcount? (carefull with stack!) */
+ /*FIXME: Call mcount? (careful with stack!) */
/* Some syscall wrappers do not call other functions, and
hence are classified as leaf, so add NO_CALLS for gdb */
@@ -151,7 +151,7 @@
/* SAVE_RP says we do */ ASM_LINE_SEP \
stw %rp, -20(%sr0,%sp) ASM_LINE_SEP \
.cfi_offset 2, -20 ASM_LINE_SEP \
- /*FIXME: Call mcount? (carefull with stack!) */
+ /*FIXME: Call mcount? (careful with stack!) */
#undef END
#define END(name) \
@@ -17,7 +17,7 @@
<https://www.gnu.org/licenses/>. */
#if BUILD_PIE_DEFAULT
-/* Can't use "call *%gs:SYSINFO_OFFSET" during statup in static PIE. */
+/* Can't use "call *%gs:SYSINFO_OFFSET" during startup in static PIE. */
# define I386_USE_SYSENTER 0
#endif
@@ -61,7 +61,7 @@
might return a large offset. Therefore we must not anymore test
for < 0, but test for a real error by making sure the value in %eax
is a real error number. Linus said he will make sure the no syscall
- returns a value in -1 .. -4095 as a valid result so we can savely
+ returns a value in -1 .. -4095 as a valid result so we can safely
test with -4095. */
/* We don't want the label for the error handle to be global when we define
@@ -86,6 +86,6 @@ libc_hidden_def (__clone2)
/* For now we leave __clone undefined. This is unlikely to be a */
/* problem, since at least the i386 __clone in glibc always failed */
-/* with a 0 sp (eventhough the kernel explicitly handled it). */
+/* with a 0 sp (even though the kernel explicitly handled it). */
/* Thus all such calls needed to pass an explicit sp, and as a result, */
/* would be unlikely to work on ia64. */
@@ -48,7 +48,7 @@ ia64_rse_rnat_addr (unsigned long *slot_addr)
return (unsigned long *) ((unsigned long) slot_addr | (0x3f << 3));
}
-/* Calcuate the number of registers in the dirty partition starting at
+/* Calculate the number of registers in the dirty partition starting at
BSPSTORE with a size of DIRTY bytes. This isn't simply DIRTY
divided by eight because the 64th slot is used to store ar.rnat. */
@@ -86,7 +86,7 @@
a large offset. Therefore we must not anymore test for < 0, but test
for a real error by making sure the value in %d0 is a real error
number. Linus said he will make sure the no syscall returns a value
- in -1 .. -4095 as a valid result so we can savely test with -4095. */
+ in -1 .. -4095 as a valid result so we can safely test with -4095. */
/* We don't want the label for the error handler to be visible in the symbol
table when we define it here. */
@@ -68,7 +68,7 @@ struct timer
/* For !SIGEV_THREAD, the resulting 'timer_t' is the returned kernel timer
- identifer (kernel_timer_t), while for SIGEV_THREAD it uses the fact malloc
+ identifier (kernel_timer_t), while for SIGEV_THREAD it uses the fact malloc
returns at least _Alignof (max_align_t) pointers plus that valid
kernel_timer_t are always positive to set the MSB bit of the returned
'timer_t' to indicate the timer handles a SIGEV_THREAD. */
@@ -26,7 +26,7 @@
#define ATOMIC_EXCHANGE_USES_CAS 0
/* Compare and exchange.
- For all "bool" routines, we return FALSE if exchange succesful. */
+ For all "bool" routines, we return FALSE if exchange successful. */
#define __arch_compare_and_exchange_bool_8_int(mem, newval, oldval, model) \
({ \
@@ -83,7 +83,7 @@
#undef ret_NOERRNO
#define ret_NOERRNO ret
-/* Perfroms a system call, returning the error code. */
+/* Performs a system call, returning the error code. */
#undef PSEUDO_ERRVAL
#define PSEUDO_ERRVAL(name, syscall_name, args) \
PSEUDO_NOERRNO (name, syscall_name, args); \
@@ -38,7 +38,7 @@
a large offset. Therefore we must not anymore test for < 0, but test
for a real error by making sure the value in %d0 is a real error
number. Linus said he will make sure the no syscall returns a value
- in -1 .. -4095 as a valid result so we can savely test with -4095. */
+ in -1 .. -4095 as a valid result so we can safely test with -4095. */
/* We don't want the label for the error handler to be visible in the symbol
table when we define it here. */
@@ -43,7 +43,7 @@
#ifdef __ASSEMBLER__
/* In microblaze ABI function call arguments are passed in registers
- r5...r10. The return value is stored in r3 (or r3:r4 regiters pair).
+ r5...r10. The return value is stored in r3 (or r3:r4 register pair).
Linux syscall uses the same convention with the addition that the
syscall number is passed in r12. To enter the kernel "brki r14,8"
instruction is used.
@@ -58,7 +58,7 @@
a large offset. Therefore we must not anymore test for < 0, but test
for a real error by making sure the value in %d0 is a real error
number. Linus said he will make sure the no syscall returns a value
- in -1 .. -4095 as a valid result so we can savely test with -4095. */
+ in -1 .. -4095 as a valid result so we can safely test with -4095. */
/* We don't want the label for the error handler to be visible in the symbol
table when we define it here. */
@@ -1,4 +1,4 @@
-/* Tests register values retreived by getcontext() for mips o32.
+/* Tests register values retrieved by getcontext() for mips o32.
Copyright (C) 2017-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
@@ -32,9 +32,9 @@
/* Defined in the kernel headers: */
#define NOTIFY_COOKIE_LEN 32 /* Length of the cookie used. */
-#define NOTIFY_WOKENUP 1 /* Code for notifcation. */
+#define NOTIFY_WOKENUP 1 /* Code for notification. */
#define NOTIFY_REMOVED 2 /* Code for closed message queue
- of de-notifcation. */
+ of de-notification. */
/* Data structure for the queued notification requests. */
@@ -61,7 +61,7 @@ static int netlink_socket = -1;
/* Barrier used to make sure data passed to the new thread is not
- resused by the parent. */
+ reused by the parent. */
static pthread_barrier_t notify_barrier;
@@ -27,7 +27,7 @@ __BEGIN_DECLS
#define SHAPER_QLEN 10
/*
- * This is a bit speed dependant (read it shouldnt be a constant!)
+ * This is a bit speed dependent (read it shouldn't be a constant!)
*
* 5 is about right for 28.8 upwards. Below that double for every
* halving of speed or so. - ie about 20 for 9600 baud.
@@ -62,7 +62,7 @@
#define AX25_DIGI_INBAND 0x01 /* Allow digipeating within port */
#define AX25_DIGI_XBAND 0x02 /* Allow digipeating across ports */
-/* Maximim number of digipeaters: */
+/* Maximum number of digipeaters: */
#define AX25_MAX_DIGIS 8
@@ -80,7 +80,7 @@ struct sockaddr_ax25
};
/*
- * The sockaddr struct with the digipeater adresses:
+ * The sockaddr struct with the digipeater addresses:
*/
struct full_sockaddr_ax25
{
@@ -83,7 +83,7 @@ __netlink_assert_response (int fd, ssize_t result)
__libc_fatal (message);
}
else
- /* Restore orignal errno value. */
+ /* Restore original errno value. */
__set_errno (error_code);
}
else if (result < sizeof (struct nlmsghdr))
@@ -93,7 +93,7 @@ weak_alias (__setcontext, setcontext)
If this NOP word does not exist, FDE lookup just repeatedly finds
__setcontext's FDE in an infinite loop, due to the convention of
- using 'address - 1' for FDE lookup. Modifiying/deleting the below
+ using 'address - 1' for FDE lookup. Modifying/deleting the below
__startcontext's FDE has no help on this. */
nop
@@ -1,4 +1,4 @@
-/* Setup of nscd worker threads. Linux verison.
+/* Setup of nscd worker threads. Linux version.
Copyright (C) 2004-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
@@ -80,7 +80,7 @@ weak_alias (__setcontext, setcontext)
makecontext we have set r9 to the start of &__startcontext.
If this NOP did not exist the unwinder would repeatedly find
- __setcontext's FDE in an infinite loop. Modifiying/deleting the below
+ __setcontext's FDE in an infinite loop. Modifying/deleting the below
__startcontext's FDE has no help on this. */
l.nop
@@ -139,7 +139,7 @@ __statfs_link_max (int result, const struct statfs *fsbuf, const char *file,
/* Not possible, return the default value. */
return LINUX_LINK_MAX;
- /* Some error occured. */
+ /* Some error occurred. */
return -1;
}
@@ -202,7 +202,7 @@ __statfs_filesize_max (int result, const struct statfs *fsbuf)
/* Not possible, return the default value. */
return 32;
- /* Some error occured. */
+ /* Some error occurred. */
return -1;
}
@@ -251,7 +251,7 @@ __statfs_symlinks (int result, const struct statfs *fsbuf)
/* Not possible, return the default value. */
return 1;
- /* Some error occured. */
+ /* Some error occurred. */
return -1;
}
@@ -286,7 +286,7 @@ __statfs_chown_restricted (int result, const struct statfs *fsbuf)
/* Not possible, return the default value. */
return 1;
- /* Some error occured. */
+ /* Some error occurred. */
return -1;
}
@@ -28,7 +28,7 @@ __personality (unsigned long persona)
task_struct->pesonality is "unsigned int".
Starting with kernel commit v2.6.35-rc1-372-g485d527, the personality
syscall accepts "unsigned int" instead of "long unsigned int".
- Inbetween, a personality argument that does not fit into "unsigned int"
+ In between, a personality argument that does not fit into "unsigned int"
would result to system call returning -EINVAL.
We explicitly truncate the personality argument to "unsigned int"
to eliminate the uncertainty. */
@@ -29,7 +29,7 @@
Second option will be used by arm which define __NR_arm_fadvise64_64
(redefined to __NR_fadvise64_64 in kernel-features.h) that behaves as
- __NR_fadvise64_64 (without the aligment argument required for the ABI).
+ __NR_fadvise64_64 (without the alignment argument required for the ABI).
Third option will be used by mips o32. Mips will use a 7 argument
syscall with __NR_fadvise64.
@@ -53,7 +53,7 @@ static inline void
__always_inline
do_set_elision_enable (int32_t elision_enable)
{
- /* Enable elision if it's avaliable in hardware. It's not necessary to check
+ /* Enable elision if it's available in hardware. It's not necessary to check
if __libc_enable_secure isn't enabled since elision_enable will be set
according to the default, which is disabled. */
if (elision_enable == 1)
@@ -126,7 +126,7 @@ __lll_elision_init (void)
syscalls which makes the glibc workaround superflours. Worse, glibc
transaction abortions leads to a performance issues on recent kernels.
- So Lock Elision is just enabled when it has been explict set (either
+ So Lock Elision is just enabled when it has been explicitly set (either
by tunables of by a configure switch) and if kernel aborts HTM
transactions on syscalls (PPC_FEATURE2_HTM_NOSC) */
@@ -57,7 +57,7 @@ get_timebase_freq_fallback (void)
the last 512 bytes of cpuinfo, so two 512 byte half_bufs
will be sufficient to contain the timebase and will
handle the case where the timebase spans the half_buf
- boundry. */
+ boundary. */
const ssize_t half_buf = sizeof (buf) / 2;
while (n >= half_buf)
{
@@ -28,7 +28,7 @@
# define ATOMIC_EXCHANGE_USES_CAS 0
/* Compare and exchange.
- For all "bool" routines, we return FALSE if exchange succesful. */
+ For all "bool" routines, we return FALSE if exchange successful. */
# define __arch_compare_and_exchange_bool_8_int(mem, newval, oldval, model) \
({ \
@@ -121,7 +121,7 @@
# undef ret_NOERRNO
# define ret_NOERRNO ret
-/* Perfroms a system call, returning the error code. */
+/* Performs a system call, returning the error code. */
# undef PSEUDO_ERRVAL
# define PSEUDO_ERRVAL(name, syscall_name, args) \
PSEUDO_NOERRNO (name, syscall_name, args) \
@@ -53,7 +53,7 @@ static inline void
__always_inline
do_set_elision_enable (int32_t elision_enable)
{
- /* Enable elision if it's avaliable in hardware. It's not necessary to check
+ /* Enable elision if it's available in hardware. It's not necessary to check
if __libc_enable_secure isn't enabled since elision_enable will be set
according to the default, which is disabled. */
if (elision_enable == 1)
@@ -121,7 +121,7 @@
pointer access) are filtered and the \
transaction will abort. In this case \
the normal lock path will execute it \
- again and result in a core dump wich does \
+ again and result in a core dump which does \
now show at tbegin but the real executed \
instruction. \
However it is not guaranteed that this \
@@ -131,7 +131,7 @@
memory for being accessible! */ \
"2: tbegin 0, 0xFF0E\n\t" \
/* Branch away in abort case (this is the \
- prefered sequence. See PoP in chapter 5 \
+ preferred sequence. See PoP in chapter 5 \
Transactional-Execution Facility \
Operation). */ \
" jnz 0f\n\t" \
@@ -42,7 +42,7 @@
a large offset. Therefore we must not anymore test for < 0, but test
for a real error by making sure the value in gpr2 is a real error
number. Linus said he will make sure that no syscall returns a value
- in -1 .. -4095 as a valid result so we can savely test with -4095. */
+ in -1 .. -4095 as a valid result so we can safely test with -4095. */
#undef PSEUDO
#define PSEUDO(name, syscall_name, args) \
@@ -46,7 +46,7 @@
a large offset. Therefore we must not anymore test for < 0, but test
for a real error by making sure the value in gpr2 is a real error
number. Linus said he will make sure that no syscall returns a value
- in -1 .. -4095 as a valid result so we can savely test with -4095. */
+ in -1 .. -4095 as a valid result so we can safely test with -4095. */
#undef PSEUDO
#define PSEUDO(name, syscall_name, args) \
@@ -24,7 +24,7 @@ static long int linux_sysconf (int name);
/* Possible arguments for get_cache_info.
The values are reflecting the level/attribute/type indications
- of ecag-instruction (extract cpu attribue). */
+ of ecag-instruction (extract cpu attribute). */
#define CACHE_LEVEL_MAX 8
#define CACHE_ATTR_LINESIZE 1
#define CACHE_ATTR_SIZE 2
@@ -119,7 +119,7 @@ struct sg_scsi_id {
/* Used by SG_GET_REQUEST_TABLE ioctl(). */
typedef struct sg_req_info {
char req_state; /* 0 -> not used, 1 -> written, 2 -> ready to read */
- char orphan; /* 0 -> normal request, 1 -> from interruped SG_IO */
+ char orphan; /* 0 -> normal request, 1 -> from interrupted SG_IO */
char sg_io_owned; /* 0 -> complete with read(), 1 -> owned by SG_IO */
char problem; /* 0 -> no problem detected, 1 -> error to report */
int pack_id; /* pack_id associated with request */
@@ -20,7 +20,7 @@
#include <ipc_priv.h>
#include <sysdep.h>
-/* Perform user-defined atomical operation of array of semaphores. */
+/* Perform user-defined atomic operation of array of semaphores. */
int
semop (int semid, struct sembuf *sops, size_t nsops)
@@ -34,7 +34,7 @@ semtimedop_syscall (int semid, struct sembuf *sops, size_t nsops,
#endif
}
-/* Perform user-defined atomical operation of array of semaphores. */
+/* Perform user-defined atomic operation of array of semaphores. */
int
__semtimedop64 (int semid, struct sembuf *sops, size_t nsops,
const struct __timespec64 *timeout)
@@ -21,7 +21,7 @@
#include <asm/ptrace.h>
#include <stddef.h>
-/* asm/ptrace.h polutes the namespace. */
+/* asm/ptrace.h pollutes the namespace. */
#undef PTRACE_GETREGS
#undef PTRACE_SETREGS
#undef PTRACE_GETFPREGS
@@ -41,7 +41,7 @@
might return a large offset. Therefore we must not anymore test
for < 0, but test for a real error by making sure the value in R0
is a real error number. Linus said he will make sure the no syscall
- returns a value in -1 .. -4095 as a valid result so we can savely
+ returns a value in -1 .. -4095 as a valid result so we can safely
test with -4095. */
#define _IMM1 #-1
@@ -102,7 +102,7 @@ weak_alias (__setcontext, setcontext)
If this NOP word does not exist, FDE lookup just repeatedly finds
__setcontext's FDE in an infinite loop, due to the convention of using
- 'address - 1' for FDE lookup. Modifiying/deleting the below
+ 'address - 1' for FDE lookup. Modifying/deleting the below
__startcontext's FDE has no help on this. */
nop
@@ -24,7 +24,7 @@
#include <bits/wordsize.h>
/* Linux/SPARC kernels up to 2.3.18 do not care much
- about what namespace polution, so use a kludge now. */
+ about what namespace pollution, so use a kludge now. */
#undef PTRACE_GETREGS
#undef PTRACE_SETREGS
#undef PTRACE_GETFPREGS
@@ -164,7 +164,7 @@ typedef greg_t gregset_t[__NGREG];
* The following structures define how a register window can appear on the
* stack. This structure is available (when required) through the `gwins'
* field of an mcontext (nested within ucontext). SPARC_MAXWINDOW is the
- * maximum number of outstanding regiters window defined in the SPARC
+ * maximum number of outstanding registers window defined in the SPARC
* architecture (*not* implementation).
*/
# define __SPARC_MAXREGWINDOW 31 /* max windows in SPARC arch. */
@@ -200,7 +200,7 @@ typedef struct
/*
* struct fq defines the minimal format of a floating point instruction queue
* entry. The size of entries in the floating point queue are implementation
- * dependent. The union FQu is guarenteed to be the first field in any ABI
+ * dependent. The union FQu is guaranteed to be the first field in any ABI
* conformant system implementation. Any additional fields provided by an
* implementation should not be used applications designed to be ABI conformant. */
@@ -203,7 +203,7 @@ __spawni_child (void *arguments)
{
/* POSIX states that if fildes was already an open file descriptor,
it shall be closed before the new file is opened. This avoid
- pontential issues when posix_spawn plus addopen action is called
+ potential issues when posix_spawn plus addopen action is called
with the process already at maximum number of file descriptor
opened and also for multiple actions on single-open special
paths (like /dev/watchdog). */
@@ -325,7 +325,7 @@ __spawnix (pid_t * pid, const char *file,
ptrdiff_t argc = 0;
/* Linux allows at most max (0x7FFFFFFF, 1/4 stack size) arguments
to be used in a execve call. We limit to INT_MAX minus one due the
- compatiblity code that may execute a shell script (maybe_script_execute)
+ compatibility code that may execute a shell script (maybe_script_execute)
where it will construct another argument list with an additional
argument. */
ptrdiff_t limit = INT_MAX - 1;
@@ -70,7 +70,7 @@
Some tests assume "/bin/sh" names a file that exists and is not a
directory. */
-/* Evalutes to the arguments in a list initializer which can be used
+/* Evaluates to the arguments in a list initializer which can be used
as a single macro argument. */
#define LIST(...) { __VA_ARGS__ }
@@ -89,7 +89,7 @@ do_test_with_offset (off_t offset)
FAIL_EXIT1 ("fail trying to read " XSTR (BLK_SIZE) " bytes");
if (memcmp (bwrite, bread, BLK_SIZE) != 0)
- FAIL_EXIT1 ("buffer written different than buffer readed");
+ FAIL_EXIT1 ("buffer written different from buffer read");
return 0;
}
@@ -55,7 +55,7 @@ probe_lock (void)
*shared_errno = -1;
support_isolate_in_subprocess (subprocess, NULL);
if (*shared_errno == 0)
- /* Lock was aquired by the subprocess, so this process has not
+ /* Lock was acquired by the subprocess, so this process has not
locked it. */
return false;
else
@@ -60,7 +60,7 @@ do_test (void)
int fd = open64 (temp_filename, O_RDWR, 0666);
TEST_VERIFY_EXIT (fd != -1);
- /* It tries then to allocate another open file descriptior with a valid
+ /* It tries then to allocate another open file descriptor with a valid
non-LFS bits struct flock but which will result in a conflicted region
which can not be represented in a non-LFS struct flock. */
struct flock lck = {
@@ -61,7 +61,7 @@ do_test (void)
int pidfd = pidfd_open (pid, 0);
TEST_VERIFY (pidfd != -1);
- /* The syscall only succeedes if the target process is exiting and there
+ /* The syscall only succeeds if the target process is exiting and there
is no guarantee that calling if after pidfd_send_signal will not error
(ince the process might have already been reaped by the OS). So just
check if it does fail when the process is stll running. */
@@ -18,7 +18,7 @@
/* This file is included by the tst-affinity*.c files to test the two
variants of the functions, under different conditions. The
- following functions have to be definied:
+ following functions have to be defined:
static int getaffinity (size_t, cpu_set_t *);
static int setaffinity (size_t, const cpu_set_t *);
@@ -77,7 +77,7 @@ static void
do_test_large_buffer (bool mc)
{
struct mmsghdr mmhdr = { 0 };
- /* It should be large enought for either timeval/timespec and the
+ /* It should be large enough for either timeval/timespec and the
64 time type as well. */
union
@@ -142,7 +142,7 @@ do_test_large_buffer (bool mc)
/* Check if recvmsg does not create the additional 64 bit timestamp if
only 32 bit timestamp is enabled if the ancillary buffer is not large
- enought. Also checks if MSG_CTRUNC is set iff for 64 bit recvmsg
+ enough. Also checks if MSG_CTRUNC is set iff for 64 bit recvmsg
symbol. */
static void
do_test_small_buffer (bool mc)
@@ -284,7 +284,7 @@ do_test_multiple_ancillary (void)
TEST_VERIFY_EXIT (r != -1);
}
- /* Enougth data for default SO_TIMESTAMP, the IP_RECVORIGDSTADDR, and the
+ /* Enough data for default SO_TIMESTAMP, the IP_RECVORIGDSTADDR, and the
extra 64-bit SO_TIMESTAMP. */
enum { msgbuflen = CMSG_SPACE (2 * sizeof (uint64_t))
+ CMSG_SPACE (sizeof (struct sockaddr_in))
@@ -55,7 +55,7 @@ struct test_msginfo
int msgmni;
};
-/* It tries to obtain some system-wide SysV messsage queue information from
+/* It tries to obtain some system-wide SysV message queue information from
/proc to check against IPC_INFO/MSG_INFO. The /proc only returns the
tunables value of MSGMAX, MSGMNB, and MSGMNI.
@@ -66,7 +66,7 @@ subprocess (void *closure)
{
int original_tid = expected_signal_tid;
- /* Do not expect that the folloing signals are delivered to the
+ /* Do not expect that the following signals are delivered to the
subprocess. The parent process retains the original
expected_signal_tid value. */
expected_signal_tid = 0;
@@ -77,7 +77,7 @@ subprocess (void *closure)
TEST_COMPARE (expected_signal_tid, 0);
/* This call has the correct PID/TID combination and is therefore
- expected to suceed. */
+ expected to succeed. */
TEST_COMPARE (tgkill (getppid (), original_tid, SIGUSR1), 0);
}
@@ -508,7 +508,7 @@ run_chroot_tests (const char *slavename, int slave)
char *linkname = xasprintf ("/proc/self/fd/%d", slave);
char *target = proc_fd_readlink (linkname);
free (linkname);
- /* Depeding on how we set up the chroot, the kernel may or may not
+ /* Depending on how we set up the chroot, the kernel may or may not
trim the leading path to the target (it may give us "/6",
instead of "/dev/pts/6"). We test it both ways (do_in_chroot_1
and do_in_chroot_2). This test group relies on the target
@@ -49,7 +49,7 @@ struct elision_config __elision_aconf =
static __always_inline void
do_set_elision_enable (int32_t elision_enable)
{
- /* Enable elision if it's avaliable in hardware. It's not necessary to check
+ /* Enable elision if it's available in hardware. It's not necessary to check
if __libc_enable_secure isn't enabled since elision_enable will be set
according to the default, which is disabled. */
if (elision_enable == 1)
@@ -43,7 +43,7 @@
might return a large offset. Therefore we must not anymore test
for < 0, but test for a real error by making sure the value in %eax
is a real error number. Linus said he will make sure the no syscall
- returns a value in -1 .. -4095 as a valid result so we can savely
+ returns a value in -1 .. -4095 as a valid result so we can safely
test with -4095. */
/* We don't want the label for the error handle to be global when we define