[v6,0/5] Support DT_RELR relative relocation format

  Changes in v6:

1. Move ELF_DYNAMIC_DO_RELR before ELF_DYNAMIC_DO_REL.

Changes in v5:

1. Update NEWS entry with the linker option, -z pack-relative-relocs.
2. Remove elf/libc-abi-version.exp and use $(READELF) to check
GLIBC_ABI_DT_RELR.

Changes in v4:

1. Always enable GLIBC_ABI_DT_RELR check.
2. Use $(OBJDUMP) instead of $(NM) for GLIBC_ABI_DT_RELR check. 

Changes in v3:

1. Don't define SUPPORT_DT_RELR.
2. Enable DT_RELR in glibc shared libraries and position independent
executables (PIE) automatically if linker supports -z pack-relative-relocs.

Changes in v2:

1. Enable DT_RELR for all targets.
2. Issue an error if there is a DT_RELR entry without GLIBC_ABI_DT_RELR
dependency nor GLIBC_PRIVATE definition.

---
PIE and shared objects usually have many relative relocations. In
2017/2018, SHT_RELR/DT_RELR was proposed on
https://groups.google.com/g/generic-abi/c/bX460iggiKg/m/GxjM0L-PBAAJ
("Proposal for a new section type SHT_RELR") and is a pre-standard. RELR
usually takes 3% or smaller space than R_*_RELATIVE relocations. The
virtual memory size of a mostly statically linked PIE is typically 5~10%
smaller.

Binutils 2.38 supports DT_RELR on x86 with the -z report-relative-reloc
option.  When DT_RELR is enabled, ld adds a GLIBC_ABI_DT_RELR symbol
version dependency on libc.so to outputs.  Issue an error if there is a
DT_RELR entry without GLIBC_ABI_DT_RELR dependency nor GLIBC_PRIVATE
definition.

DT_RELR is enabled in glibc shared libraries and position independent
executables (PIE) automatically if linker supports -z pack-relative-relocs.

The DT_RELR usage in glibc can be disabled with --disable-default-dt-relr.

Tested with binutils 2.38 on i686, x86-64 and x32.

Fangrui Song (1):
  elf: Support DT_RELR relative relocation format [BZ #27924]

H.J. Lu (4):
  elf: Properly handle zero DT_RELA/DT_REL values
  Add GLIBC_ABI_DT_RELR for DT_RELR support
  Add --disable-default-dt-relr
  NEWS: Mention DT_RELR support

 INSTALL                |  6 ++++
 Makeconfig             | 19 +++++++++++++
 Makerules              |  2 ++
 NEWS                   |  3 +-
 configure              | 60 +++++++++++++++++++++++++++++++++++++++
 configure.ac           | 23 +++++++++++++++
 elf/Makefile           | 30 ++++++++++++++++++--
 elf/Versions           |  5 ++++
 elf/dl-version.c       | 33 ++++++++++++++++++++--
 elf/dynamic-link.h     | 40 +++++++++++++++++++++++++-
 elf/elf.h              | 13 +++++++--
 elf/get-dynamic-info.h | 19 +++++++++++--
 elf/tst-relr-pie.c     |  1 +
 elf/tst-relr.c         | 64 ++++++++++++++++++++++++++++++++++++++++++
 include/link.h         |  6 ++++
 manual/install.texi    |  5 ++++
 scripts/abilist.awk    |  2 ++
 scripts/versions.awk   |  7 ++++-
 18 files changed, 325 insertions(+), 13 deletions(-)
 create mode 100644 elf/tst-relr-pie.c
 create mode 100644 elf/tst-relr.c
  

On 2022-03-10, H.J. Lu wrote:
>Changes in v6:
>
>1. Move ELF_DYNAMIC_DO_RELR before ELF_DYNAMIC_DO_REL.
>
>Changes in v5:
>
>1. Update NEWS entry with the linker option, -z pack-relative-relocs.
>2. Remove elf/libc-abi-version.exp and use $(READELF) to check
>GLIBC_ABI_DT_RELR.
>
>Changes in v4:
>
>1. Always enable GLIBC_ABI_DT_RELR check.
>2. Use $(OBJDUMP) instead of $(NM) for GLIBC_ABI_DT_RELR check.
>
>Changes in v3:
>
>1. Don't define SUPPORT_DT_RELR.
>2. Enable DT_RELR in glibc shared libraries and position independent
>executables (PIE) automatically if linker supports -z pack-relative-relocs.
>
>Changes in v2:
>
>1. Enable DT_RELR for all targets.
>2. Issue an error if there is a DT_RELR entry without GLIBC_ABI_DT_RELR
>dependency nor GLIBC_PRIVATE definition.
>
>---
>PIE and shared objects usually have many relative relocations. In
>2017/2018, SHT_RELR/DT_RELR was proposed on
>https://groups.google.com/g/generic-abi/c/bX460iggiKg/m/GxjM0L-PBAAJ
>("Proposal for a new section type SHT_RELR") and is a pre-standard. RELR
>usually takes 3% or smaller space than R_*_RELATIVE relocations. The
>virtual memory size of a mostly statically linked PIE is typically 5~10%
>smaller.
>
>Binutils 2.38 supports DT_RELR on x86 with the -z report-relative-reloc
>option.  When DT_RELR is enabled, ld adds a GLIBC_ABI_DT_RELR symbol
>version dependency on libc.so to outputs.  Issue an error if there is a
>DT_RELR entry without GLIBC_ABI_DT_RELR dependency nor GLIBC_PRIVATE
>definition.
>
>DT_RELR is enabled in glibc shared libraries and position independent
>executables (PIE) automatically if linker supports -z pack-relative-relocs.
>
>The DT_RELR usage in glibc can be disabled with --disable-default-dt-relr.
>
>Tested with binutils 2.38 on i686, x86-64 and x32.
>
>Fangrui Song (1):
>  elf: Support DT_RELR relative relocation format [BZ #27924]
>
>H.J. Lu (4):
>  elf: Properly handle zero DT_RELA/DT_REL values
>  Add GLIBC_ABI_DT_RELR for DT_RELR support
>  Add --disable-default-dt-relr
>  NEWS: Mention DT_RELR support
>
> INSTALL                |  6 ++++
> Makeconfig             | 19 +++++++++++++
> Makerules              |  2 ++
> NEWS                   |  3 +-
> configure              | 60 +++++++++++++++++++++++++++++++++++++++
> configure.ac           | 23 +++++++++++++++
> elf/Makefile           | 30 ++++++++++++++++++--
> elf/Versions           |  5 ++++
> elf/dl-version.c       | 33 ++++++++++++++++++++--
> elf/dynamic-link.h     | 40 +++++++++++++++++++++++++-
> elf/elf.h              | 13 +++++++--
> elf/get-dynamic-info.h | 19 +++++++++++--
> elf/tst-relr-pie.c     |  1 +
> elf/tst-relr.c         | 64 ++++++++++++++++++++++++++++++++++++++++++
> include/link.h         |  6 ++++
> manual/install.texi    |  5 ++++
> scripts/abilist.awk    |  2 ++
> scripts/versions.awk   |  7 ++++-
> 18 files changed, 325 insertions(+), 13 deletions(-)
> create mode 100644 elf/tst-relr-pie.c
> create mode 100644 elf/tst-relr.c
>
>-- 
>2.35.1
>

Thanks. Every change looks good to me now.
Other folks can check my extensive comments on
previous iterations on the patch series
https://sourceware.org/pipermail/libc-alpha/2022-March/

Reviewed-by: Fangrui Song <maskray@google.com>