[1/2] gdb.threads/step-over-thread-exit.exp improvements
Checks
Context |
Check |
Description |
linaro-tcwg-bot/tcwg_gdb_build--master-aarch64 |
success
|
Testing passed
|
linaro-tcwg-bot/tcwg_gdb_build--master-arm |
success
|
Testing passed
|
linaro-tcwg-bot/tcwg_gdb_check--master-aarch64 |
success
|
Testing passed
|
linaro-tcwg-bot/tcwg_gdb_check--master-arm |
success
|
Testing passed
|
Commit Message
This commit makes the following improvements to
gdb.threads/step-over-thread-exit.exp:
- Add a third axis to stepping over the breakpoint with displaced vs
inline stepping -- also test with no breakpoint at all.
- Check that when GDB reports "Command aborted, thread exited.", the
selected thread is the thread that exited. This is always true
currently on GNU/Linux by coincidence, but a similar testcase on AMD
GPU exposed a problem here. Better make the testcase catch any
potential regression.
- Fixes a race that Simon ran into with GDBserver testing.
(gdb) next
[New Thread 2143071.2143438]
Thread 3 "step-over-threa" hit Breakpoint 2, 0x000055555555524e in my_exit_syscall () at .../testsuite/lib/my-syscalls.S:74
74 SYSCALL (my_exit, __NR_exit)
(gdb) FAIL: gdb.threads/step-over-thread-exit.exp: displaced-stepping=auto: non-stop=on: target-non-stop=on: schedlock=off: cmd=next: ns_stop_all=0: command aborts when thread exits
I was not able to reproduce it, but I believe that what happens is
the following:
Once we continue, the thread 2 exits, and the main thread thus
unblocks from its pthread_join, and spawns a new thread. That new
thread may hit the breakpoint at my_exit_syscall very quickly. GDB
could then see/process that breakpoint event before the thread exit
event for the thread we care about, which would result in the
failure seen above.
The fix here is to not loop and start a new thread at all in the
scenario where the race can happen. We only need to loop and spawn
new threads when testing with "cmd=continue" and schedlock off, in
which case GDB doesn't abort the command when the thread exits.
Change-Id: I90c95c32f00630a3f682b1541c23aff52451f9b6
---
.../gdb.threads/step-over-thread-exit.c | 16 ++-
.../gdb.threads/step-over-thread-exit.exp | 107 +++++++++++++++---
2 files changed, 102 insertions(+), 21 deletions(-)
@@ -18,6 +18,7 @@
#include <pthread.h>
#include <assert.h>
#include <stdlib.h>
+#include <unistd.h>
#include "../lib/my-syscalls.h"
static void *
@@ -30,13 +31,19 @@ thread_func (void *arg)
abort ();
}
+/* Number of threads we'll create. */
+int n_threads = 100;
+
int
-main (void)
+main (int argc, char **argv)
{
int i;
- /* Spawn and join a thread, 100 times. */
- for (i = 0; i < 100; i++)
+ if (argc > 1)
+ n_threads = atoi (argv[1]);
+
+ /* Spawn and join a thread, N_THREADS times. */
+ for (i = 0; i < n_threads; i++)
{
pthread_t thread;
int ret;
@@ -48,5 +55,8 @@ main (void)
assert (ret == 0);
}
+ /* Some time to make sure that GDB processes the thread exit event
+ before the whole-process exit. */
+ sleep (3);
return 0;
}
@@ -25,11 +25,28 @@ if { [build_executable "failed to prepare" $testfile \
return
}
-# Each argument is a different testing axis, most of them obvious.
+# Test stepping/continuing at an exit syscall instruction.
+#
+# Each argument is a different testing axis.
+#
+# STEP_OVER_MODE can be one of:
+#
+# - none: don't put a breakpoint on the s_endpgm instruction.
+#
+# - inline: put a breakpoint on the s_endpgm instruction, and use
+# in-line stepping to step over it (disable displaced-stepping).
+#
+# - displaced: same, but use displaced stepping.
+#
+# SCHEDLOCK can be "on" or "off".
+#
+# CMD is the GDB command to run when at the exit syscall instruction.
+#
# NS_STOP_ALL is only used if testing "set non-stop on", and indicates
# whether to have GDB explicitly stop all threads before continuing to
# thread exit.
-proc test {displaced-stepping non-stop target-non-stop schedlock cmd ns_stop_all} {
+#
+proc test {step_over_mode non-stop target-non-stop schedlock cmd ns_stop_all} {
if {${non-stop} == "off" && $ns_stop_all} {
error "invalid arguments"
}
@@ -40,19 +57,24 @@ proc test {displaced-stepping non-stop target-non-stop schedlock cmd ns_stop_all
clean_restart $::binfile
}
- gdb_test_no_output "set displaced-stepping ${displaced-stepping}"
-
- if { ![runto_main] } {
- return
+ if { $step_over_mode == "none" } {
+ # Nothing to do.
+ } elseif { $step_over_mode == "inline" } {
+ gdb_test_no_output "set displaced-stepping off"
+ } elseif { $step_over_mode == "displaced" } {
+ gdb_test_no_output "set displaced-stepping on"
+ } else {
+ error "Invalid step_over_mode value: $step_over_mode"
}
- gdb_breakpoint "my_exit_syscall"
-
if {$schedlock
|| (${non-stop} == "on" && $ns_stop_all)} {
- gdb_test "continue" \
- "Thread 2 .*hit Breakpoint $::decimal.* my_exit_syscall .*" \
- "continue until syscall"
+
+ gdb_test_no_output "set args 1"
+
+ if { ![runto my_exit_syscall] } {
+ return
+ }
if {${non-stop} == "on"} {
# The test only spawns one thread at a time, so this just
@@ -72,6 +94,13 @@ proc test {displaced-stepping non-stop target-non-stop schedlock cmd ns_stop_all
gdb_test_no_output "set scheduler-locking ${schedlock}"
+ # If testing a step-over is requested, leave the breakpoint at
+ # the current instruction to force a step-over; otherwise,
+ # remove it.
+ if { $step_over_mode == "none" } {
+ delete_breakpoints
+ }
+
if {$cmd == "continue"} {
gdb_test "continue" \
"No unwaited-for children left." \
@@ -84,9 +113,23 @@ proc test {displaced-stepping non-stop target-non-stop schedlock cmd ns_stop_all
}
}
} else {
+ if {$cmd != "continue" || $step_over_mode == "none"} {
+ set n_threads 1
+ } else {
+ set n_threads 100
+ }
+
+ gdb_test_no_output "set args $n_threads"
+
+ if { ![runto_main] } {
+ return
+ }
+
+ gdb_breakpoint "my_exit_syscall"
+
gdb_test_no_output "set scheduler-locking ${schedlock}"
- if {$cmd != "continue"} {
+ if {$cmd != "continue" || $step_over_mode == "none"} {
set thread "<unknown>"
gdb_test_multiple "continue" "" {
-re -wrap "Thread ($::decimal) .*hit Breakpoint $::decimal.* my_exit_syscall .*" {
@@ -98,12 +141,40 @@ proc test {displaced-stepping non-stop target-non-stop schedlock cmd ns_stop_all
"switch to event thread"
}
- gdb_test_multiple $cmd "command aborts when thread exits" {
- -re "Command aborted, thread exited\\.\r\n$::gdb_prompt " {
- pass $gdb_test_name
+ # If testing a step-over is requested, leave the breakpoint at
+ # the current instruction to force a step-over; otherwise,
+ # remove it.
+ if { $step_over_mode == "none" } {
+ delete_breakpoints
+ }
+
+ if {$cmd == "continue"} {
+ gdb_continue_to_end "continue to end" "continue" 1
+ } else {
+ gdb_test_multiple $cmd "command aborts when thread exits" {
+ -re "Command aborted, thread exited\\.\r\n$::gdb_prompt " {
+ pass $gdb_test_name
+ }
+ }
+
+ set cur_thr_after "<unknown>"
+ gdb_test_multiple "print /d \$_thread" "get selected thread after" {
+ -re -wrap "$::decimal = ($::decimal)" {
+ set cur_thr_after $expect_out(1,string)
+ pass "$gdb_test_name"
+ }
}
+
+ gdb_assert {$thread == $cur_thr_after} \
+ "selected thread didn't change"
}
} else {
+ if {$step_over_mode == "none"} {
+ # If we removed the breakpoint at my_exit_syscall, the
+ # loopping wouldn't work. This case is instead
+ # handled in the then/else branch above.
+ error "unexpected \$step_over_mode==none"
+ }
for { set i 0 } { $i < 100 } { incr i } {
with_test_prefix "iter $i" {
set ok 0
@@ -130,7 +201,7 @@ proc test {displaced-stepping non-stop target-non-stop schedlock cmd ns_stop_all
}
}
-foreach_with_prefix displaced-stepping {off auto} {
+foreach_with_prefix step_over_mode {none inline displaced} {
foreach_with_prefix non-stop {off on} {
foreach_with_prefix target-non-stop {off on} {
if {${non-stop} == "on" && ${target-non-stop} == "off"} {
@@ -142,11 +213,11 @@ foreach_with_prefix displaced-stepping {off auto} {
foreach_with_prefix cmd {"next" "continue"} {
if {${non-stop} == "on"} {
foreach_with_prefix ns_stop_all {0 1} {
- test ${displaced-stepping} ${non-stop} ${target-non-stop} \
+ test ${step_over_mode} ${non-stop} ${target-non-stop} \
${schedlock} ${cmd} ${ns_stop_all}
}
} else {
- test ${displaced-stepping} ${non-stop} ${target-non-stop} ${schedlock} ${cmd} 0
+ test ${step_over_mode} ${non-stop} ${target-non-stop} ${schedlock} ${cmd} 0
}
}
}