diff mbox

[commit,patchv2,1/2] save breakpoints does not save disabled breakpoints correctly

Message ID 20141012195530.GA18486@host2.jankratochvil.net
State New
Headers show

Commit Message

Jan Kratochvil Oct. 12, 2014, 7:55 p.m. UTC
On Fri, 10 Oct 2014 07:55:50 +0200, Yao Qi wrote:
> These two patches look right to me.

Therefore checked them in.


On Fri, 10 Oct 2014 14:31:21 +0200, Pedro Alves wrote:
> In places were we want to avoid that, and we want to write a pattern
> that spawns multiple lines, we build the regex with join.  E.g.,
> gdb.btrace/instruction_history.exp:
> 
> # test that we see the expected instructions
> gdb_test "record instruction-history 3,7" [join [list \
>   "3\t   0x\[0-9a-f\]+ <loop\\+\[0-9\]+>:\tje     0x\[0-9a-f\]+ <loop\\+\[0-9\]+>" \
>   "4\t   0x\[0-9a-f\]+ <loop\\+\[0-9\]+>:\tdec    %eax" \
>   "5\t   0x\[0-9a-f\]+ <loop\\+\[0-9\]+>:\tjmp    0x\[0-9a-f\]+ <loop\\+\[0-9\]+>" \
>   "6\t   0x\[0-9a-f\]+ <loop\\+\[0-9\]+>:\tcmp    \\\$0x0,%eax" \
>   "7\t   0x\[0-9a-f\]+ <loop\\+\[0-9\]+>:\tje     0x\[0-9a-f\]+ <loop\\+\[0-9\]+>\r" \
>   ] "\r\n"]

This looks more safe to me but the other was has been approved.


Thanks,
Jan
But IMO it is a functionality regression as:

 * gdb_test_sequence permits arbitary number of lines of text between those
   lines being matched.  Former regex string did not allow it.
   This may make a difference if GDB regresses by printing some unexpected
   line after the breakpoint info line (like a "silent" line).

>  * \[\r\n\]+ can be used to anchor the beginning of the pattern, in the sense
>    of Perl regex ^ /m match.  At least I have found such cases in existing
>    *.exp files so I used that.  Using ^ really does not work.
>
>    But I am not aware how to do Perl regex $ /m match.  Using $ really does
>    not work.  But this means that for example the trailing
>      ( \\((host|target) evals\\))?
>    on the line
>      "\[\r\n\]+\[ \t\]+stop only if i == 1( \\((host|target) evals\\))?"
>    originally made sense there but now it can be removed as it has no longer
>    any functionality there - it will match now any trailing line garbage.

by Yao Qi:

In this test case, ( \\((host|target) evals\\))? isn't needed in the
pattern.  What we test here is to save breakpoints into file and restore
them from file.  The contents saved in file are:

break save-bp.c:31
  condition $bpnum i == 1

the information about the place where the condition is evaluated isn't
saved, so we don't need to check.  Breakpoint save and restore has
nothing to do with where the condition is evaluated (host or target).  I
am fine to leave it here now.

gdb/testsuite/ChangeLog
2014-10-09  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* gdb.base/save-bp.exp (info break): Use gdb_test_sequence.
---
 gdb/testsuite/ChangeLog            |  4 ++++
 gdb/testsuite/gdb.base/save-bp.exp | 15 +++++++++++++--
 2 files changed, 17 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 348adff..fdd18d7 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,7 @@ 
+2014-10-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
+
+	* gdb.base/save-bp.exp (info break): Use gdb_test_sequence.
+
 2014-10-11  Yao Qi  <yao@codesourcery.com>
 
 	* gdb.server/server-kill.exp: Execute command
diff --git a/gdb/testsuite/gdb.base/save-bp.exp b/gdb/testsuite/gdb.base/save-bp.exp
index ba98633..61f647c 100644
--- a/gdb/testsuite/gdb.base/save-bp.exp
+++ b/gdb/testsuite/gdb.base/save-bp.exp
@@ -72,5 +72,16 @@  gdb_test "source $bps" "" "source bps"
 # Now, verify that all breakpoints have been created correctly...
 set bp_row_start "\[0-9\]+ +breakpoint +keep +y +0x\[0-9a-f\]+ +in"
 set dprintf_row_start "\[0-9\]+ +dprintf +keep +y +0x\[0-9a-f\]+ +in"
-gdb_test "info break" \
-  " *Num +Type +Disp +Enb +Address +What\r\n$bp_row_start break_me at .*$srcfile:\[0-9\]+\r\n$bp_row_start main at .*$srcfile:$loc_bp2\r\n$bp_row_start main at .*$srcfile:$loc_bp3 +thread 1\r\n\[ \t]+stop only in thread 1\r\n$bp_row_start main at .*$srcfile:$loc_bp4\r\n\[ \t\]+stop only if i == 1( \\((host|target) evals\\))?\r\n$bp_row_start main at .*$srcfile:$loc_bp5\r\n\[ \t\]+silent\r\n$dprintf_row_start main at .*$srcfile:$loc_bp5\r\n\[ \t\]+printf.*"
+gdb_test_sequence "info break" "info break" [list				\
+  "\[\r\n\]+Num +Type +Disp +Enb +Address +What"				\
+  "\[\r\n\]+$bp_row_start break_me at \[^\r\n\]*$srcfile:\[0-9\]+"		\
+  "\[\r\n\]+$bp_row_start main at \[^\r\n\]*$srcfile:$loc_bp2"			\
+  "\[\r\n\]+$bp_row_start main at \[^\r\n\]*$srcfile:$loc_bp3 +thread 1"	\
+  "\[\r\n\]+\[ \t]+stop only in thread 1"					\
+  "\[\r\n\]+$bp_row_start main at \[^\r\n\]*$srcfile:$loc_bp4"			\
+  "\[\r\n\]+\[ \t\]+stop only if i == 1( \\((host|target) evals\\))?"		\
+  "\[\r\n\]+$bp_row_start main at \[^\r\n\]*$srcfile:$loc_bp5"			\
+  "\[\r\n\]+\[ \t\]+silent"							\
+  "\[\r\n\]+$dprintf_row_start main at \[^\r\n\]*$srcfile:$loc_bp5"		\
+  "\[\r\n\]+\[ \t\]+printf"							\
+]