libgloss: merge v850 into top-level Makefile
Commit Message
Avoid a recursive make to speed things up a bit.
A v850-elf build shows installed objects & libs produce same code.
---
libgloss/Makefile.am | 3 +
libgloss/Makefile.in | 219 +++++++++++++++++++++++++++++++------
libgloss/configure | 19 +++-
libgloss/configure.ac | 6 +-
libgloss/v850/Makefile.in | 151 -------------------------
libgloss/v850/Makefile.inc | 44 ++++++++
6 files changed, 250 insertions(+), 192 deletions(-)
delete mode 100644 libgloss/v850/Makefile.in
create mode 100644 libgloss/v850/Makefile.inc
@@ -102,6 +102,9 @@ endif
if CONFIG_WINCE
include wince/Makefile.inc
endif
+if CONFIG_V850
+include v850/Makefile.inc
+endif
if CONFIG_XTENSA
include xtensa/Makefile.inc
endif
@@ -177,8 +177,7 @@ case "${target}" in
subdirs="$subdirs mt"
;;
v850*-*-*)
- AC_CONFIG_FILES([v850/Makefile])
- subdirs="$subdirs v850"
+ config_v850=true
;;
visium-*-*)
AC_CONFIG_FILES([visium/Makefile])
@@ -249,7 +248,8 @@ AC_SUBST(subdirs)
dnl These subdirs have converted to non-recursive make. Hopefully someday all
dnl the ports above will too!
m4_foreach_w([SUBDIR], [
- aarch64 arc arm bfin csky d30v iq2000 libnosys lm32 moxie nios2 riscv wince xtensa
+ aarch64 arc arm bfin csky d30v iq2000 libnosys lm32 moxie nios2 riscv v850
+ wince xtensa
], [dnl
AM_CONDITIONAL([CONFIG_]m4_toupper(SUBDIR), [test x$config_]SUBDIR = xtrue)
])
deleted file mode 100644
@@ -1,151 +0,0 @@
-# Copyright (c) 2002 Red Hat, Inc
-#
-# The authors hereby grant permission to use, copy, modify, distribute,
-# and license this software and its documentation for any purpose, provided
-# that existing copyright notices are retained in all copies and that this
-# notice is included verbatim in any distributions. No written agreement,
-# license, or royalty fee is required for any of the authorized uses.
-# Modifications to this software may be copyrighted by their authors
-# and need not follow the licensing terms described here, provided that
-# the new terms are clearly indicated on the first page of each file where
-# they apply.
-
-# Makefile for libgloss/frv. This is the board support
-# code for the various frv targets.
-
-DESTDIR =
-VPATH = @srcdir@ @srcdir@/..
-srcdir = @srcdir@
-objdir = .
-srcroot = $(srcdir)/../..
-objroot = $(objdir)/../..
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-host_alias = @host_alias@
-target_alias = @target_alias@
-
-bindir = @bindir@
-libdir = @libdir@
-tooldir = $(exec_prefix)/$(target_alias)
-
-# Multilib support variables.
-# TOP is used instead of MULTI{BUILD,SRC}TOP.
-MULTIDIRS =
-MULTISUBDIR =
-MULTIDO = true
-MULTICLEAN = true
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-
-SHELL = /bin/sh
-
-mkinstalldirs = $(SHELL) $(srcroot)/mkinstalldirs
-
-CC = @CC@
-
-AS = @AS@
-AR = @AR@
-LD = @LD@
-RANLIB = @RANLIB@
-AR_FLAGS = rc
-
-OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
- then echo ${objroot}/../binutils/objdump ; \
- else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
-OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
- then echo ${objroot}/../binutils/objcopy ; \
- else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`
-
-CRT0 = crt0.o
-SIM_BSP = libsim.a
-SIM_OBJS = _exit.o \
- access.o \
- chmod.o \
- chown.o \
- close.o \
- creat.o \
- crt1.o \
- execv.o \
- execve.o \
- fork.o \
- fstat.o \
- getpid.o \
- gettime.o \
- isatty.o \
- kill.o \
- link.o \
- lseek.o \
- open.o \
- pipe.o \
- read.o \
- sbrk.o \
- stat.o \
- time.o \
- times.o \
- trap.o \
- unlink.o \
- utime.o \
- wait.o \
- write.o
-
-#### Host specific Makefile fragment comes in here.
-@host_makefile_frag@
-
-all: $(CRT0) $(SIM_BSP)
-
-$(SIM_BSP): $(SIM_OBJS)
- $(AR) $(ARFLAGS) $@ $?
- $(RANLIB) $@
-
-_exit.o: $(srcdir)/_exit.c
-access.o: $(srcdir)/access.c
-chmod.o: $(srcdir)/chmod.c
-chown.o: $(srcdir)/chown.c
-close.o: $(srcdir)/close.c
-creat.o: $(srcdir)/creat.c
-crt1.o: $(srcdir)/crt1.c
-execv.o: $(srcdir)/execv.c
-execve.o: $(srcdir)/execve.c
-fork.o: $(srcdir)/fork.c
-fstat.o: $(srcdir)/fstat.c
-getpid.o: $(srcdir)/getpid.c
-gettime.o: $(srcdir)/gettime.c
-isatty.o: $(srcdir)/isatty.c
-kill.o: $(srcdir)/kill.c
-link.o: $(srcdir)/link.c
-lseek.o: $(srcdir)/lseek.c
-open.o: $(srcdir)/open.c
-pipe.o: $(srcdir)/pipe.c
-read.o: $(srcdir)/read.c
-sbrk.o: $(srcdir)/sbrk.c
-stat.o: $(srcdir)/stat.c
-time.o: $(srcdir)/time.c
-times.o: $(srcdir)/times.c
-trap.o: $(srcdir)/trap.S
-unlink.o: $(srcdir)/unlink.c
-utime.o: $(srcdir)/utime.c
-wait.o: $(srcdir)/wait.c
-write.o: $(srcdir)/write.c
-
-install: $($(CPU)_INSTALL)
- ${mkinstalldirs} ${DESTDIR}${tooldir}/lib${MULTISUBDIR}
- $(INSTALL_DATA) $(CRT0) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(CRT0)
- $(INSTALL_DATA) $(SIM_BSP) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(SIM_BSP)
-
-clean mostlyclean:
- rm -f *.o *.a
-
-distclean maintainer-clean realclean: clean
- rm -f Makefile
-
-.PHONY: info dvi doc install-info clean-info
-info doc dvi:
-install-info:
-clean-info:
-
-Makefile: Makefile.in ../config.status
- cd .. && $(SHELL) config.status
new file mode 100644
@@ -0,0 +1,44 @@
+## Copyright (c) 2002 Red Hat, Inc
+##
+## The authors hereby grant permission to use, copy, modify, distribute,
+## and license this software and its documentation for any purpose, provided
+## that existing copyright notices are retained in all copies and that this
+## notice is included verbatim in any distributions. No written agreement,
+## license, or royalty fee is required for any of the authorized uses.
+## Modifications to this software may be copyrighted by their authors
+## and need not follow the licensing terms described here, provided that
+## the new terms are clearly indicated on the first page of each file where
+## they apply.
+
+multilibtool_DATA += %D%/crt0.o
+multilibtool_LIBRARIES += %D%/libsim.a
+%C%_libsim_a_SOURCES = \
+ %D%/_exit.c \
+ %D%/access.c \
+ %D%/chmod.c \
+ %D%/chown.c \
+ %D%/close.c \
+ %D%/creat.c \
+ %D%/crt1.c \
+ %D%/execv.c \
+ %D%/execve.c \
+ %D%/fork.c \
+ %D%/fstat.c \
+ %D%/getpid.c \
+ %D%/gettime.c \
+ %D%/isatty.c \
+ %D%/kill.c \
+ %D%/link.c \
+ %D%/lseek.c \
+ %D%/open.c \
+ %D%/pipe.c \
+ %D%/read.c \
+ %D%/sbrk.c \
+ %D%/stat.c \
+ %D%/time.c \
+ %D%/times.c \
+ %D%/trap.S \
+ %D%/unlink.c \
+ %D%/utime.c \
+ %D%/wait.c \
+ %D%/write.c