[v4,03/15] malloc/{memusage.c, memusagestat.c}: fix warn unused result
Checks
Context |
Check |
Description |
dj/TryBot-apply_patch |
success
|
Patch applied to master at the time it was sent
|
Commit Message
Fix unused result warnings, detected when _FORTIFY_SOURCE is enabled in
glibc.
---
malloc/memusage.c | 53 +++++++++++++++++++++++++++++++++----------
malloc/memusagestat.c | 48 +++++++++++++++++++++++++++++++++++----
2 files changed, 85 insertions(+), 16 deletions(-)
Comments
On 2023-04-28 08:21, Frédéric Bérat wrote:
> Fix unused result warnings, detected when _FORTIFY_SOURCE is enabled in
> glibc.
> ---
> malloc/memusage.c | 53 +++++++++++++++++++++++++++++++++----------
> malloc/memusagestat.c | 48 +++++++++++++++++++++++++++++++++++----
> 2 files changed, 85 insertions(+), 16 deletions(-)
>
> diff --git a/malloc/memusage.c b/malloc/memusage.c
> index 2a3a508557..0c414b0e85 100644
> --- a/malloc/memusage.c
> +++ b/malloc/memusage.c
> @@ -18,6 +18,8 @@
>
> #include <assert.h>
> #include <dlfcn.h>
> +#include <errno.h>
> +#include <error.h>
> #include <fcntl.h>
> #include <stdatomic.h>
> #include <stdbool.h>
> @@ -142,6 +144,27 @@ peak_atomic_max (_Atomic size_t *peak, size_t val)
> while (! atomic_compare_exchange_weak (peak, &v, val));
> }
>
> +static void
> +write_all (int fd, const void *buffer, size_t length)
> +{
> + const char *p = buffer;
> + const char *end = p + length;
> + while (p < end)
> + {
> + ssize_t ret = write (fd, p, end - p);
> + if (ret < 0)
> + error (EXIT_FAILURE, errno,
> + "write of %zu bytes failed after %td: %m",
> + length, p - (const char *) buffer);
> +
> + if (ret == 0)
> + error (EXIT_FAILURE, 0,
> + "write return 0 after writing %td bytes of %zu",
> + p - (const char *) buffer, length);
Same as 1/15, this needs to be a translatable string. Also "write
returned 0 after...".
Also since this is repeated thrice, I wonder if it should get pulled out
into its own header and included in memusage.c, memusagestat.c and gencat.c.
> + p += ret;
> + }
> +}
> +
> /* Update the global data after a successful function call. */
> static void
> update_data (struct header *result, size_t len, size_t old_len)
> @@ -210,10 +233,11 @@ update_data (struct header *result, size_t len, size_t old_len)
> gettime (&buffer[idx]);
>
> /* Write out buffer if it is full. */
> - if (idx + 1 == buffer_size)
> - write (fd, buffer, buffer_size * sizeof (struct entry));
> - else if (idx + 1 == 2 * buffer_size)
> - write (fd, &buffer[buffer_size], buffer_size * sizeof (struct entry));
> + if (idx + 1 == buffer_size || idx + 1 == 2 * buffer_size)
> + {
> + uint32_t write_size = buffer_size * sizeof (buffer[0]);
> + write_all (fd, &buffer[idx + 1 - buffer_size], write_size);
> + }
> }
> }
>
> @@ -299,8 +323,8 @@ me (void)
> first.stack = 0;
> gettime (&first);
> /* Write it two times since we need the starting and end time. */
> - write (fd, &first, sizeof (first));
> - write (fd, &first, sizeof (first));
> + write_all (fd, &first, sizeof (first));
> + write_all (fd, &first, sizeof (first));
>
> /* Determine the buffer size. We use the default if the
> environment variable is not present. */
> @@ -850,24 +874,29 @@ dest (void)
> if (fd != -1)
> {
> /* Write the partially filled buffer. */
> + struct entry *start = buffer;
> + uint32_t write_cnt = buffer_cnt;
> +
> if (buffer_cnt > buffer_size)
> - write (fd, buffer + buffer_size,
> - (buffer_cnt - buffer_size) * sizeof (struct entry));
> - else
> - write (fd, buffer, buffer_cnt * sizeof (struct entry));
> + {
> + start = buffer + buffer_size;
> + write_cnt = buffer_cnt - buffer_size;
> + }
> +
> + write_all (fd, start, write_cnt * sizeof (buffer[0]));
>
> /* Go back to the beginning of the file. We allocated two records
> here when we opened the file. */
> lseek (fd, 0, SEEK_SET);
> /* Write out a record containing the total size. */
> first.stack = peak_total;
> - write (fd, &first, sizeof (struct entry));
> + write_all (fd, &first, sizeof (first));
> /* Write out another record containing the maximum for heap and
> stack. */
> first.heap = peak_heap;
> first.stack = peak_stack;
> gettime (&first);
> - write (fd, &first, sizeof (struct entry));
> + write_all (fd, &first, sizeof (first));
>
> /* Close the file. */
> close (fd);
> diff --git a/malloc/memusagestat.c b/malloc/memusagestat.c
> index 67c5131f79..9fe6dba2d8 100644
> --- a/malloc/memusagestat.c
> +++ b/malloc/memusagestat.c
> @@ -114,6 +114,45 @@ static int time_based;
> static int also_total = 0;
>
>
> +static void
> +read_all (int fd, void *buffer, size_t length)
> +{
> + char *p = buffer;
> + char *end = p + length;
> + while (p < end)
> + {
> + ssize_t ret = read (fd, p, end - p);
> + if (ret < 0)
> + error (EXIT_FAILURE, errno,
> + "read of %zu bytes failed after %td: %m",
> + length, p - (char *) buffer);
> +
> + p += ret;
> + }
> +}
> +
> +static void
> +write_all (int fd, const void *buffer, size_t length)
> +{
> + const char *p = buffer;
> + const char *end = p + length;
> + while (p < end)
> + {
> + ssize_t ret = write (fd, p, end - p);
> + if (ret < 0)
> + error (EXIT_FAILURE, errno,
> + "write of %zu bytes failed after %td: %m",
> + length, p - (const char *) buffer);
> +
> + if (ret == 0)
> + error (EXIT_FAILURE, 0,
> + "write return 0 after writing %td bytes of %zu",
> + p - (const char *) buffer, length);
> + p += ret;
> + }
> +}
> +
> +
> int
> main (int argc, char *argv[])
> {
> @@ -188,7 +227,7 @@ main (int argc, char *argv[])
> total = st.st_size / sizeof (struct entry) - 2;
>
> /* Read the administrative information. */
> - read (fd, headent, sizeof (headent));
> + read_all (fd, headent, sizeof (headent));
> maxsize_heap = headent[1].heap;
> maxsize_stack = headent[1].stack;
> maxsize_total = headent[0].stack;
> @@ -220,7 +259,8 @@ main (int argc, char *argv[])
>
> /* Write the computed values in the file. */
> lseek (fd, 0, SEEK_SET);
> - write (fd, headent, 2 * sizeof (struct entry));
> + write_all (fd, headent, sizeof (headent));
> +
> }
>
> if (also_total)
> @@ -372,7 +412,7 @@ main (int argc, char *argv[])
> size_t new[2];
> uint64_t now;
>
> - read (fd, &entry, sizeof (entry));
> + read_all (fd, &entry, sizeof (entry));
>
> now = ((uint64_t) entry.time_high) << 32 | entry.time_low;
>
> @@ -455,7 +495,7 @@ main (int argc, char *argv[])
> size_t xpos;
> uint64_t now;
>
> - read (fd, &entry, sizeof (entry));
> + read_all (fd, &entry, sizeof (entry));
>
> now = ((uint64_t) entry.time_high) << 32 | entry.time_low;
> xpos = 40 + ((xsize - 80) * (now - start_time)) / total_time;
@@ -18,6 +18,8 @@
#include <assert.h>
#include <dlfcn.h>
+#include <errno.h>
+#include <error.h>
#include <fcntl.h>
#include <stdatomic.h>
#include <stdbool.h>
@@ -142,6 +144,27 @@ peak_atomic_max (_Atomic size_t *peak, size_t val)
while (! atomic_compare_exchange_weak (peak, &v, val));
}
+static void
+write_all (int fd, const void *buffer, size_t length)
+{
+ const char *p = buffer;
+ const char *end = p + length;
+ while (p < end)
+ {
+ ssize_t ret = write (fd, p, end - p);
+ if (ret < 0)
+ error (EXIT_FAILURE, errno,
+ "write of %zu bytes failed after %td: %m",
+ length, p - (const char *) buffer);
+
+ if (ret == 0)
+ error (EXIT_FAILURE, 0,
+ "write return 0 after writing %td bytes of %zu",
+ p - (const char *) buffer, length);
+ p += ret;
+ }
+}
+
/* Update the global data after a successful function call. */
static void
update_data (struct header *result, size_t len, size_t old_len)
@@ -210,10 +233,11 @@ update_data (struct header *result, size_t len, size_t old_len)
gettime (&buffer[idx]);
/* Write out buffer if it is full. */
- if (idx + 1 == buffer_size)
- write (fd, buffer, buffer_size * sizeof (struct entry));
- else if (idx + 1 == 2 * buffer_size)
- write (fd, &buffer[buffer_size], buffer_size * sizeof (struct entry));
+ if (idx + 1 == buffer_size || idx + 1 == 2 * buffer_size)
+ {
+ uint32_t write_size = buffer_size * sizeof (buffer[0]);
+ write_all (fd, &buffer[idx + 1 - buffer_size], write_size);
+ }
}
}
@@ -299,8 +323,8 @@ me (void)
first.stack = 0;
gettime (&first);
/* Write it two times since we need the starting and end time. */
- write (fd, &first, sizeof (first));
- write (fd, &first, sizeof (first));
+ write_all (fd, &first, sizeof (first));
+ write_all (fd, &first, sizeof (first));
/* Determine the buffer size. We use the default if the
environment variable is not present. */
@@ -850,24 +874,29 @@ dest (void)
if (fd != -1)
{
/* Write the partially filled buffer. */
+ struct entry *start = buffer;
+ uint32_t write_cnt = buffer_cnt;
+
if (buffer_cnt > buffer_size)
- write (fd, buffer + buffer_size,
- (buffer_cnt - buffer_size) * sizeof (struct entry));
- else
- write (fd, buffer, buffer_cnt * sizeof (struct entry));
+ {
+ start = buffer + buffer_size;
+ write_cnt = buffer_cnt - buffer_size;
+ }
+
+ write_all (fd, start, write_cnt * sizeof (buffer[0]));
/* Go back to the beginning of the file. We allocated two records
here when we opened the file. */
lseek (fd, 0, SEEK_SET);
/* Write out a record containing the total size. */
first.stack = peak_total;
- write (fd, &first, sizeof (struct entry));
+ write_all (fd, &first, sizeof (first));
/* Write out another record containing the maximum for heap and
stack. */
first.heap = peak_heap;
first.stack = peak_stack;
gettime (&first);
- write (fd, &first, sizeof (struct entry));
+ write_all (fd, &first, sizeof (first));
/* Close the file. */
close (fd);
@@ -114,6 +114,45 @@ static int time_based;
static int also_total = 0;
+static void
+read_all (int fd, void *buffer, size_t length)
+{
+ char *p = buffer;
+ char *end = p + length;
+ while (p < end)
+ {
+ ssize_t ret = read (fd, p, end - p);
+ if (ret < 0)
+ error (EXIT_FAILURE, errno,
+ "read of %zu bytes failed after %td: %m",
+ length, p - (char *) buffer);
+
+ p += ret;
+ }
+}
+
+static void
+write_all (int fd, const void *buffer, size_t length)
+{
+ const char *p = buffer;
+ const char *end = p + length;
+ while (p < end)
+ {
+ ssize_t ret = write (fd, p, end - p);
+ if (ret < 0)
+ error (EXIT_FAILURE, errno,
+ "write of %zu bytes failed after %td: %m",
+ length, p - (const char *) buffer);
+
+ if (ret == 0)
+ error (EXIT_FAILURE, 0,
+ "write return 0 after writing %td bytes of %zu",
+ p - (const char *) buffer, length);
+ p += ret;
+ }
+}
+
+
int
main (int argc, char *argv[])
{
@@ -188,7 +227,7 @@ main (int argc, char *argv[])
total = st.st_size / sizeof (struct entry) - 2;
/* Read the administrative information. */
- read (fd, headent, sizeof (headent));
+ read_all (fd, headent, sizeof (headent));
maxsize_heap = headent[1].heap;
maxsize_stack = headent[1].stack;
maxsize_total = headent[0].stack;
@@ -220,7 +259,8 @@ main (int argc, char *argv[])
/* Write the computed values in the file. */
lseek (fd, 0, SEEK_SET);
- write (fd, headent, 2 * sizeof (struct entry));
+ write_all (fd, headent, sizeof (headent));
+
}
if (also_total)
@@ -372,7 +412,7 @@ main (int argc, char *argv[])
size_t new[2];
uint64_t now;
- read (fd, &entry, sizeof (entry));
+ read_all (fd, &entry, sizeof (entry));
now = ((uint64_t) entry.time_high) << 32 | entry.time_low;
@@ -455,7 +495,7 @@ main (int argc, char *argv[])
size_t xpos;
uint64_t now;
- read (fd, &entry, sizeof (entry));
+ read_all (fd, &entry, sizeof (entry));
now = ((uint64_t) entry.time_high) << 32 | entry.time_low;
xpos = 40 + ((xsize - 80) * (now - start_time)) / total_time;