elf: Replace PI_STATIC_AND_HIDDEN with opposite HIDDEN_VAR_NEEDS_DYNAMIC_RELOC
Checks
| Context |
Check |
Description |
| dj/TryBot-apply_patch |
success
|
Patch applied to master at the time it was sent
|
| dj/TryBot-32bit |
success
|
Build for i686
|
Commit Message
PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
variables and hidden visibility variables in a shared object (ld.so)
need dynamic relocations (usually R_*_RELATIVE). PI (position
independent) in the macro name is a misnomer: a code sequence using GOT
is typically position-independent as well, but using dynamic relocations
does not meet the requirement.
Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
ports will define PI_STATIC_AND_HIDDEN. Current ports defining
PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
default.
No functional change.
Note: HIDDEN_VAR_NEEDS_DYNAMIC_RELOC will be removed when Alan Modra's
powerpc64 static-pie work
(https://sourceware.org/pipermail/libc-alpha/2022-April/137987.html)
lands.
---
config.h.in | 6 +-
elf/rtld.c | 2 +-
sysdeps/aarch64/configure | 5 -
sysdeps/aarch64/configure.ac | 4 -
sysdeps/alpha/configure | 5 -
sysdeps/alpha/configure.ac | 4 -
sysdeps/arc/configure | 2 -
sysdeps/arc/configure.ac | 1 -
sysdeps/arm/configure | 3 -
sysdeps/arm/configure.ac | 5 -
sysdeps/csky/configure | 3 -
sysdeps/csky/configure.ac | 2 -
sysdeps/hppa/configure | 3 +
sysdeps/hppa/configure.ac | 2 +
sysdeps/ia64/configure | 3 -
sysdeps/ia64/configure.ac | 4 -
sysdeps/m68k/configure | 165 +++++++++++++++++++++++++
sysdeps/m68k/configure.ac | 6 +
sysdeps/microblaze/configure | 3 +
sysdeps/microblaze/configure.ac | 2 +
sysdeps/mips/configure | 2 +
sysdeps/mips/configure.ac | 2 +-
sysdeps/nios2/configure | 3 +
sysdeps/nios2/configure.ac | 2 +
sysdeps/or1k/configure | 3 -
sysdeps/or1k/configure.ac | 2 -
sysdeps/powerpc/powerpc32/configure | 3 +
sysdeps/powerpc/powerpc32/configure.ac | 2 +
sysdeps/powerpc/powerpc64/configure | 3 +
sysdeps/powerpc/powerpc64/configure.ac | 2 +
sysdeps/powerpc/tst-tlsifunc.c | 2 +-
sysdeps/riscv/configure | 3 -
sysdeps/riscv/configure.ac | 2 -
sysdeps/s390/configure | 3 -
sysdeps/s390/configure.ac | 4 -
sysdeps/sh/configure | 3 -
sysdeps/sh/configure.ac | 4 -
sysdeps/sparc/configure | 2 -
sysdeps/sparc/configure.ac | 2 -
sysdeps/x86/configure | 3 -
sysdeps/x86/configure.ac | 4 -
41 files changed, 204 insertions(+), 82 deletions(-)
create mode 100644 sysdeps/m68k/configure
create mode 100644 sysdeps/m68k/configure.ac
Comments
On 25/04/2022 04:58, Fangrui Song wrote:
> PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
> variables and hidden visibility variables in a shared object (ld.so)
> need dynamic relocations (usually R_*_RELATIVE). PI (position
> independent) in the macro name is a misnomer: a code sequence using GOT
> is typically position-independent as well, but using dynamic relocations
> does not meet the requirement.
>
> Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
> ports will define PI_STATIC_AND_HIDDEN. Current ports defining
> PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
> default.
>
> No functional change.
>
> Note: HIDDEN_VAR_NEEDS_DYNAMIC_RELOC will be removed when Alan Modra's
> powerpc64 static-pie work
> (https://sourceware.org/pipermail/libc-alpha/2022-April/137987.html)
> lands.
I agree the macro naming is confusing and does not represent the intent
is a straigthforward manner. Patch looks ok, but I have added some
comments below.
> ---
> config.h.in | 6 +-
> elf/rtld.c | 2 +-
> sysdeps/aarch64/configure | 5 -
> sysdeps/aarch64/configure.ac | 4 -
> sysdeps/alpha/configure | 5 -
> sysdeps/alpha/configure.ac | 4 -
> sysdeps/arc/configure | 2 -
> sysdeps/arc/configure.ac | 1 -
> sysdeps/arm/configure | 3 -
> sysdeps/arm/configure.ac | 5 -
> sysdeps/csky/configure | 3 -
> sysdeps/csky/configure.ac | 2 -
> sysdeps/hppa/configure | 3 +
> sysdeps/hppa/configure.ac | 2 +
> sysdeps/ia64/configure | 3 -
> sysdeps/ia64/configure.ac | 4 -
> sysdeps/m68k/configure | 165 +++++++++++++++++++++++++
> sysdeps/m68k/configure.ac | 6 +
> sysdeps/microblaze/configure | 3 +
> sysdeps/microblaze/configure.ac | 2 +
> sysdeps/mips/configure | 2 +
> sysdeps/mips/configure.ac | 2 +-
> sysdeps/nios2/configure | 3 +
> sysdeps/nios2/configure.ac | 2 +
> sysdeps/or1k/configure | 3 -
> sysdeps/or1k/configure.ac | 2 -
> sysdeps/powerpc/powerpc32/configure | 3 +
> sysdeps/powerpc/powerpc32/configure.ac | 2 +
> sysdeps/powerpc/powerpc64/configure | 3 +
> sysdeps/powerpc/powerpc64/configure.ac | 2 +
> sysdeps/powerpc/tst-tlsifunc.c | 2 +-
> sysdeps/riscv/configure | 3 -
> sysdeps/riscv/configure.ac | 2 -
> sysdeps/s390/configure | 3 -
> sysdeps/s390/configure.ac | 4 -
> sysdeps/sh/configure | 3 -
> sysdeps/sh/configure.ac | 4 -
> sysdeps/sparc/configure | 2 -
> sysdeps/sparc/configure.ac | 2 -
> sysdeps/x86/configure | 3 -
> sysdeps/x86/configure.ac | 4 -
> 41 files changed, 204 insertions(+), 82 deletions(-)
> create mode 100644 sysdeps/m68k/configure
> create mode 100644 sysdeps/m68k/configure.ac
>
> diff --git a/config.h.in b/config.h.in
> index a94f756859..916465fce8 100644
> --- a/config.h.in
> +++ b/config.h.in
> @@ -84,9 +84,9 @@
> /* Define if the compiler\'s exception support is based on libunwind. */
> #undef HAVE_CC_WITH_LIBUNWIND
>
> -/* Define if the access to static and hidden variables is position independent
> - and does not need relocations. */
> -#undef PI_STATIC_AND_HIDDEN
> +/* Define if the accesses to static and hidden variables in a shared object
> + need dynamic relocations. */
> +#undef HIDDEN_VAR_NEEDS_DYNAMIC_RELOC
>
> /* Define this to disable the 'hidden_proto' et al macros in
> include/libc-symbols.h that avoid PLT slots in PIE. */
OK, naming make more sense now.
> diff --git a/elf/rtld.c b/elf/rtld.c
> index 19e328f89e..2174cc1da7 100644
> --- a/elf/rtld.c
> +++ b/elf/rtld.c
> @@ -424,7 +424,7 @@ DL_SYSINFO_IMPLEMENTATION
> is fine, too. The latter is important here. We can avoid setting
> up a temporary link map for ld.so if we can mark _rtld_global as
> hidden. */
> -#ifdef PI_STATIC_AND_HIDDEN
> +#ifndef HIDDEN_VAR_NEEDS_DYNAMIC_RELOC
> # define DONT_USE_BOOTSTRAP_MAP 1
> #endif
>
I think it would be better to now always assume the variable is defined:
#if HIDDEN_VAR_NEEDS_DYNAMIC_RELOC
# define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1
#endif
> diff --git a/sysdeps/aarch64/configure b/sysdeps/aarch64/configure
> index 4c1fac49f3..bf972122b1 100644
> --- a/sysdeps/aarch64/configure
> +++ b/sysdeps/aarch64/configure
> @@ -1,11 +1,6 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/aarch64.
>
> -# Static and hidden objects are accessed without dynamic relocations.
> -# The exception is -mcmodel=large which is unsupported with PIC/PIE.
> -$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> -
> -
> # Static PIE is supported.
> $as_echo "#define SUPPORT_STATIC_PIE 1" >>confdefs.h
>
> diff --git a/sysdeps/aarch64/configure.ac b/sysdeps/aarch64/configure.ac
> index 3347c13fa1..51253d9802 100644
> --- a/sysdeps/aarch64/configure.ac
> +++ b/sysdeps/aarch64/configure.ac
> @@ -1,10 +1,6 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/aarch64.
>
> -# Static and hidden objects are accessed without dynamic relocations.
> -# The exception is -mcmodel=large which is unsupported with PIC/PIE.
> -AC_DEFINE(PI_STATIC_AND_HIDDEN)
> -
> # Static PIE is supported.
> AC_DEFINE(SUPPORT_STATIC_PIE)
>
Ok.
> diff --git a/sysdeps/alpha/configure b/sysdeps/alpha/configure
> index 3d665d96f2..f67a0e20a9 100644
> --- a/sysdeps/alpha/configure
> +++ b/sysdeps/alpha/configure
> @@ -1,11 +1,6 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/alpha.
>
> -# With required gcc+binutils, we can always access static and hidden
> -# symbols in a position independent way.
> -$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> -
> -
> # PIE builds fail on binutils 2.37 and earlier, see:
> # https://sourceware.org/bugzilla/show_bug.cgi?id=28672
> $as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
> diff --git a/sysdeps/alpha/configure.ac b/sysdeps/alpha/configure.ac
> index 8f9a39ed2e..465665def0 100644
> --- a/sysdeps/alpha/configure.ac
> +++ b/sysdeps/alpha/configure.ac
> @@ -1,10 +1,6 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/alpha.
>
> -# With required gcc+binutils, we can always access static and hidden
> -# symbols in a position independent way.
> -AC_DEFINE(PI_STATIC_AND_HIDDEN)
> -
> # PIE builds fail on binutils 2.37 and earlier, see:
> # https://sourceware.org/bugzilla/show_bug.cgi?id=28672
> AC_DEFINE(PIE_UNSUPPORTED)
Ok.
> diff --git a/sysdeps/arc/configure b/sysdeps/arc/configure
> index bce7d3c377..92050f44e3 100644
> --- a/sysdeps/arc/configure
> +++ b/sysdeps/arc/configure
> @@ -1,8 +1,6 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/arc.
>
> -$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> -
> libc_cv_have_sdata_section=no
>
> # For ARC, historically ; was used for comments and not newline
> diff --git a/sysdeps/arc/configure.ac b/sysdeps/arc/configure.ac
> index cb490e47b3..619da4e088 100644
> --- a/sysdeps/arc/configure.ac
> +++ b/sysdeps/arc/configure.ac
> @@ -1,7 +1,6 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/arc.
>
> -AC_DEFINE(PI_STATIC_AND_HIDDEN)
> libc_cv_have_sdata_section=no
>
> # For ARC, historically ; was used for comments and not newline
Ok.
> diff --git a/sysdeps/arm/configure b/sysdeps/arm/configure
> index 431e843b2b..b40ce60461 100644
> --- a/sysdeps/arm/configure
> +++ b/sysdeps/arm/configure
> @@ -1,9 +1,6 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/arm.
>
> -$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> -
> -
> # We check to see if the compiler and flags are
> # selecting the hard-float ABI and if they are then
> # we set libc_cv_arm_pcs_vfp to yes which causes
> diff --git a/sysdeps/arm/configure.ac b/sysdeps/arm/configure.ac
> index 90cdd69c75..da078ce012 100644
> --- a/sysdeps/arm/configure.ac
> +++ b/sysdeps/arm/configure.ac
> @@ -1,11 +1,6 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/arm.
>
> -dnl It is always possible to access static and hidden symbols in an
> -dnl position independent way. This has been true since GCC 4.1,
> -dnl which is older than the minimum version required to build libc.
> -AC_DEFINE(PI_STATIC_AND_HIDDEN)
> -
> # We check to see if the compiler and flags are
> # selecting the hard-float ABI and if they are then
> # we set libc_cv_arm_pcs_vfp to yes which causes
Ok.
> diff --git a/sysdeps/csky/configure b/sysdeps/csky/configure
> index 27464eb707..bcbcea089a 100644
> --- a/sysdeps/csky/configure
> +++ b/sysdeps/csky/configure
> @@ -1,9 +1,6 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/csky.
>
> -$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> -
> -
> # PIE builds fail on binutils 2.37 and earlier, see:
> # https://sourceware.org/bugzilla/show_bug.cgi?id=28672
> $as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
> diff --git a/sysdeps/csky/configure.ac b/sysdeps/csky/configure.ac
> index 8e00824909..ffd8c1ca9c 100644
> --- a/sysdeps/csky/configure.ac
> +++ b/sysdeps/csky/configure.ac
> @@ -1,8 +1,6 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/csky.
>
> -AC_DEFINE(PI_STATIC_AND_HIDDEN)
> -
> # PIE builds fail on binutils 2.37 and earlier, see:
> # https://sourceware.org/bugzilla/show_bug.cgi?id=28672
> AC_DEFINE(PIE_UNSUPPORTED)
Ok.
> diff --git a/sysdeps/hppa/configure b/sysdeps/hppa/configure
> index cf5acf966d..ebb42c592c 100644
> --- a/sysdeps/hppa/configure
> +++ b/sysdeps/hppa/configure
> @@ -32,6 +32,9 @@ cat >>confdefs.h <<_ACEOF
> _ACEOF
>
>
> +$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
> +
> +
> # PIE builds fail on binutils 2.37 and earlier, see:
> # https://sourceware.org/bugzilla/show_bug.cgi?id=28672
> $as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
> diff --git a/sysdeps/hppa/configure.ac b/sysdeps/hppa/configure.ac
> index 3e1c35bbd9..5e59a63f9a 100644
> --- a/sysdeps/hppa/configure.ac
> +++ b/sysdeps/hppa/configure.ac
> @@ -20,6 +20,8 @@ fi
> rm -f conftest*])
> AC_DEFINE_UNQUOTED(ASM_LINE_SEP, $libc_cv_asm_line_sep)
>
> +AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
> +
> # PIE builds fail on binutils 2.37 and earlier, see:
> # https://sourceware.org/bugzilla/show_bug.cgi?id=28672
> AC_DEFINE(PIE_UNSUPPORTED)
Ok.
> diff --git a/sysdeps/ia64/configure b/sysdeps/ia64/configure
> index 748cb52601..90be9c0266 100644
> --- a/sysdeps/ia64/configure
> +++ b/sysdeps/ia64/configure
> @@ -1,9 +1,6 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/ia64.
>
> -$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> -
> -
> # PIE builds fail on binutils 2.37 and earlier, see:
> # https://sourceware.org/bugzilla/show_bug.cgi?id=28672
> $as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
> diff --git a/sysdeps/ia64/configure.ac b/sysdeps/ia64/configure.ac
> index 8e5fba32c3..6958c26415 100644
> --- a/sysdeps/ia64/configure.ac
> +++ b/sysdeps/ia64/configure.ac
> @@ -1,10 +1,6 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/ia64.
>
> -dnl It is always possible to access static and hidden symbols in an
> -dnl position independent way.
> -AC_DEFINE(PI_STATIC_AND_HIDDEN)
> -
> # PIE builds fail on binutils 2.37 and earlier, see:
> # https://sourceware.org/bugzilla/show_bug.cgi?id=28672
> AC_DEFINE(PIE_UNSUPPORTED)
Ok.
> diff --git a/sysdeps/m68k/configure b/sysdeps/m68k/configure
> new file mode 100644
> index 0000000000..b3cd28349e
> --- /dev/null
> +++ b/sysdeps/m68k/configure
> @@ -0,0 +1,165 @@
> +# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> + # Local configure fragment for sysdeps/nios2.
This seems wrong.
> +
> +# Nios II big endian is not yet supported.
> +
> +
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
> +$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
> +if ${ac_cv_path_GREP+:} false; then :
> + $as_echo_n "(cached) " >&6
> +else
> + if test -z "$GREP"; then
> + ac_path_GREP_found=false
> + # Loop through the user's path and test for each of PROGNAME-LIST
> + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
> +do
> + IFS=$as_save_IFS
> + test -z "$as_dir" && as_dir=.
> + for ac_prog in grep ggrep; do
> + for ac_exec_ext in '' $ac_executable_extensions; do
> + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
> + as_fn_executable_p "$ac_path_GREP" || continue
> +# Check for GNU ac_path_GREP and select it if it is found.
> + # Check for GNU $ac_path_GREP
> +case `"$ac_path_GREP" --version 2>&1` in
> +*GNU*)
> + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
> +*)
> + ac_count=0
> + $as_echo_n 0123456789 >"conftest.in"
> + while :
> + do
> + cat "conftest.in" "conftest.in" >"conftest.tmp"
> + mv "conftest.tmp" "conftest.in"
> + cp "conftest.in" "conftest.nl"
> + $as_echo 'GREP' >> "conftest.nl"
> + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
> + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
> + as_fn_arith $ac_count + 1 && ac_count=$as_val
> + if test $ac_count -gt ${ac_path_GREP_max-0}; then
> + # Best one so far, save it but keep looking for a better one
> + ac_cv_path_GREP="$ac_path_GREP"
> + ac_path_GREP_max=$ac_count
> + fi
> + # 10*(2^10) chars as input seems more than enough
> + test $ac_count -gt 10 && break
> + done
> + rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
> +esac
> +
> + $ac_path_GREP_found && break 3
> + done
> + done
> + done
> +IFS=$as_save_IFS
> + if test -z "$ac_cv_path_GREP"; then
> + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
> + fi
> +else
> + ac_cv_path_GREP=$GREP
> +fi
> +
> +fi
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
> +$as_echo "$ac_cv_path_GREP" >&6; }
> + GREP="$ac_cv_path_GREP"
> +
> +
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
> +$as_echo_n "checking for egrep... " >&6; }
> +if ${ac_cv_path_EGREP+:} false; then :
> + $as_echo_n "(cached) " >&6
> +else
> + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
> + then ac_cv_path_EGREP="$GREP -E"
> + else
> + if test -z "$EGREP"; then
> + ac_path_EGREP_found=false
> + # Loop through the user's path and test for each of PROGNAME-LIST
> + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
> +do
> + IFS=$as_save_IFS
> + test -z "$as_dir" && as_dir=.
> + for ac_prog in egrep; do
> + for ac_exec_ext in '' $ac_executable_extensions; do
> + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
> + as_fn_executable_p "$ac_path_EGREP" || continue
> +# Check for GNU ac_path_EGREP and select it if it is found.
> + # Check for GNU $ac_path_EGREP
> +case `"$ac_path_EGREP" --version 2>&1` in
> +*GNU*)
> + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
> +*)
> + ac_count=0
> + $as_echo_n 0123456789 >"conftest.in"
> + while :
> + do
> + cat "conftest.in" "conftest.in" >"conftest.tmp"
> + mv "conftest.tmp" "conftest.in"
> + cp "conftest.in" "conftest.nl"
> + $as_echo 'EGREP' >> "conftest.nl"
> + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
> + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
> + as_fn_arith $ac_count + 1 && ac_count=$as_val
> + if test $ac_count -gt ${ac_path_EGREP_max-0}; then
> + # Best one so far, save it but keep looking for a better one
> + ac_cv_path_EGREP="$ac_path_EGREP"
> + ac_path_EGREP_max=$ac_count
> + fi
> + # 10*(2^10) chars as input seems more than enough
> + test $ac_count -gt 10 && break
> + done
> + rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
> +esac
> +
> + $ac_path_EGREP_found && break 3
> + done
> + done
> + done
> +IFS=$as_save_IFS
> + if test -z "$ac_cv_path_EGREP"; then
> + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
> + fi
> +else
> + ac_cv_path_EGREP=$EGREP
> +fi
> +
> + fi
> +fi
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
> +$as_echo "$ac_cv_path_EGREP" >&6; }
> + EGREP="$ac_cv_path_EGREP"
> +
> +
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for big endian" >&5
> +$as_echo_n "checking for big endian... " >&6; }
> +if ${libc_cv_nios2_be+:} false; then :
> + $as_echo_n "(cached) " >&6
> +else
> + cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> +/* end confdefs.h. */
> +#ifdef __nios2_big_endian__
> + yes
> + #endif
> +
> +_ACEOF
> +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
> + $EGREP "yes" >/dev/null 2>&1; then :
> + libc_cv_nios2_be=yes
> +else
> + libc_cv_nios2_be=no
> +fi
> +rm -f conftest*
> +
> +fi
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_nios2_be" >&5
> +$as_echo "$libc_cv_nios2_be" >&6; }
> +if test $libc_cv_nios2_be = yes; then
> + as_fn_error $? "Big endian not supported for Nios II" "$LINENO" 5
> +fi
> +
> +$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
> +
> diff --git a/sysdeps/m68k/configure.ac b/sysdeps/m68k/configure.ac
> new file mode 100644
> index 0000000000..1c373b1ba3
> --- /dev/null
> +++ b/sysdeps/m68k/configure.ac
> @@ -0,0 +1,6 @@
> +GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> +# Local configure fragment for sysdeps/m68k.
> +
> +# Accessing static and hidden variables in a shared object needs relative
> +# relocation.
> +AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
Ok.
> diff --git a/sysdeps/microblaze/configure b/sysdeps/microblaze/configure
> index e6652562d2..b5306339df 100755
> --- a/sysdeps/microblaze/configure
> +++ b/sysdeps/microblaze/configure
> @@ -1,6 +1,9 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/microblaze.
>
> +$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
> +
> +
> # gcc 11.2.1 and earlier crash with an internal compiler error, see:
> # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103613
> $as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
> diff --git a/sysdeps/microblaze/configure.ac b/sysdeps/microblaze/configure.ac
> index 1c58f70a7b..0b451df111 100644
> --- a/sysdeps/microblaze/configure.ac
> +++ b/sysdeps/microblaze/configure.ac
> @@ -1,6 +1,8 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/microblaze.
>
> +AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
> +
> # gcc 11.2.1 and earlier crash with an internal compiler error, see:
> # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103613
> AC_DEFINE(PIE_UNSUPPORTED)
Ok.
> diff --git a/sysdeps/mips/configure b/sysdeps/mips/configure
> index 4e13248c03..3f4d9e9759 100644
> --- a/sysdeps/mips/configure
> +++ b/sysdeps/mips/configure
> @@ -1,6 +1,8 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/mips.
>
> +$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
> +
>
>
>
> diff --git a/sysdeps/mips/configure.ac b/sysdeps/mips/configure.ac
> index bcbdaffd9f..d3cd780d78 100644
> --- a/sysdeps/mips/configure.ac
> +++ b/sysdeps/mips/configure.ac
> @@ -3,7 +3,7 @@ GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
>
> dnl No MIPS GCC supports accessing static and hidden symbols in an
> dnl position independent way.
> -dnl AC_DEFINE(PI_STATIC_AND_HIDDEN)
> +AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
>
> AC_CACHE_CHECK([whether the compiler is using the 2008 NaN encoding],
> libc_cv_mips_nan2008, [AC_EGREP_CPP(yes, [dnl
Ok.
> diff --git a/sysdeps/nios2/configure b/sysdeps/nios2/configure
> index 14c8a3a014..b3cd28349e 100644
> --- a/sysdeps/nios2/configure
> +++ b/sysdeps/nios2/configure
> @@ -160,3 +160,6 @@ $as_echo "$libc_cv_nios2_be" >&6; }
> if test $libc_cv_nios2_be = yes; then
> as_fn_error $? "Big endian not supported for Nios II" "$LINENO" 5
> fi
> +
> +$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
> +
> diff --git a/sysdeps/nios2/configure.ac b/sysdeps/nios2/configure.ac
> index f05f43802b..f738e9a7ed 100644
> --- a/sysdeps/nios2/configure.ac
> +++ b/sysdeps/nios2/configure.ac
> @@ -11,3 +11,5 @@ AC_CACHE_CHECK([for big endian],
> if test $libc_cv_nios2_be = yes; then
> AC_MSG_ERROR([Big endian not supported for Nios II])
> fi
> +
> +AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
Ok.
> diff --git a/sysdeps/or1k/configure b/sysdeps/or1k/configure
> index 1fe508c447..16146a8403 100644
> --- a/sysdeps/or1k/configure
> +++ b/sysdeps/or1k/configure
> @@ -1,5 +1,2 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/or1k.
> -
> -$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> -
> diff --git a/sysdeps/or1k/configure.ac b/sysdeps/or1k/configure.ac
> index 76ff97dc9a..b0214c6d84 100644
> --- a/sysdeps/or1k/configure.ac
> +++ b/sysdeps/or1k/configure.ac
> @@ -1,4 +1,2 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/or1k.
> -
> -AC_DEFINE(PI_STATIC_AND_HIDDEN)
Ok.
> diff --git a/sysdeps/powerpc/powerpc32/configure b/sysdeps/powerpc/powerpc32/configure
> index 29cfd53e8b..551505327a 100644
> --- a/sysdeps/powerpc/powerpc32/configure
> +++ b/sysdeps/powerpc/powerpc32/configure
> @@ -1,6 +1,9 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/powerpc/powerpc32.
>
> +$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
> +
> +
> # See whether GCC uses -msecure-plt.
> { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -msecure-plt by default" >&5
> $as_echo_n "checking for -msecure-plt by default... " >&6; }
> diff --git a/sysdeps/powerpc/powerpc32/configure.ac b/sysdeps/powerpc/powerpc32/configure.ac
> index 5d3a9b509d..2f0ea63e0d 100644
> --- a/sysdeps/powerpc/powerpc32/configure.ac
> +++ b/sysdeps/powerpc/powerpc32/configure.ac
> @@ -1,6 +1,8 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/powerpc/powerpc32.
>
> +AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
> +
> # See whether GCC uses -msecure-plt.
> AC_CACHE_CHECK(for -msecure-plt by default, libc_cv_ppc_secure_plt, [dnl
> echo 'int foo (void) { extern int bar; return bar; }' > conftest.c
Ok.
> diff --git a/sysdeps/powerpc/powerpc64/configure b/sysdeps/powerpc/powerpc64/configure
> index fddea0355a..f57c58ac11 100644
> --- a/sysdeps/powerpc/powerpc64/configure
> +++ b/sysdeps/powerpc/powerpc64/configure
> @@ -1,6 +1,9 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/powerpc/powerpc64.
>
> +$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
> +
> +
> { $as_echo "$as_me:${as_lineno-$LINENO}: checking for support for overlapping .opd entries" >&5
> $as_echo_n "checking for support for overlapping .opd entries... " >&6; }
> if ${libc_cv_overlapping_opd+:} false; then :
> diff --git a/sysdeps/powerpc/powerpc64/configure.ac b/sysdeps/powerpc/powerpc64/configure.ac
> index 1f3d54414c..111a0ae4b3 100644
> --- a/sysdeps/powerpc/powerpc64/configure.ac
> +++ b/sysdeps/powerpc/powerpc64/configure.ac
> @@ -1,6 +1,8 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/powerpc/powerpc64.
>
> +AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
> +
> AC_CACHE_CHECK(for support for overlapping .opd entries,
> libc_cv_overlapping_opd, [dnl
> libc_cv_overlapping_opd=no
Ok.
> diff --git a/sysdeps/powerpc/tst-tlsifunc.c b/sysdeps/powerpc/tst-tlsifunc.c
> index 6b256c6229..8e559b575d 100644
> --- a/sysdeps/powerpc/tst-tlsifunc.c
> +++ b/sysdeps/powerpc/tst-tlsifunc.c
> @@ -102,7 +102,7 @@ do_test (void)
> if (&bar == bar_ptr)
> printf ("PASS: bar address read from IFUNC resolver is correct.\n");
> #if !defined TST_TLSIFUNC_STATIC || !defined PIC \
> - || !defined PI_STATIC_AND_HIDDEN
> + || defined HIDDEN_VAR_NEEDS_DYNAMIC_RELOC
> else
> {
> printf ("FAIL: bar address read from IFUNC resolver is incorrect.\n");
As before, it would be better to assume define avaliability.
> diff --git a/sysdeps/riscv/configure b/sysdeps/riscv/configure
> index 4a56fca94b..2372225a26 100644
> --- a/sysdeps/riscv/configure
> +++ b/sysdeps/riscv/configure
> @@ -1,9 +1,6 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/riscv/elf.
>
> -$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> -
> -
> # Check if static linker supports R_RISCV_ALIGN
> { $as_echo "$as_me:${as_lineno-$LINENO}: checking for R_RISCV_ALIGN linker relaxation support" >&5
> $as_echo_n "checking for R_RISCV_ALIGN linker relaxation support... " >&6; }
> diff --git a/sysdeps/riscv/configure.ac b/sysdeps/riscv/configure.ac
> index 44a5279903..dbcc216689 100644
> --- a/sysdeps/riscv/configure.ac
> +++ b/sysdeps/riscv/configure.ac
> @@ -1,8 +1,6 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/riscv/elf.
>
> -AC_DEFINE(PI_STATIC_AND_HIDDEN)
> -
> # Check if static linker supports R_RISCV_ALIGN
> AC_CACHE_CHECK([for R_RISCV_ALIGN linker relaxation support], [libc_cv_riscv_r_align],[dnl
> cat > conftest.S <<EOF
Ok.
> diff --git a/sysdeps/s390/configure b/sysdeps/s390/configure
> index 431088acad..cc68cbbb03 100644
> --- a/sysdeps/s390/configure
> +++ b/sysdeps/s390/configure
> @@ -1,9 +1,6 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/s390.
>
> -$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> -
> -
> { $as_echo "$as_me:${as_lineno-$LINENO}: checking for __builtin_tbegin" >&5
> $as_echo_n "checking for __builtin_tbegin... " >&6; }
> if ${libc_cv_gcc_builtin_tbegin+:} false; then :
> diff --git a/sysdeps/s390/configure.ac b/sysdeps/s390/configure.ac
> index 14948c81ed..daf1bc6823 100644
> --- a/sysdeps/s390/configure.ac
> +++ b/sysdeps/s390/configure.ac
> @@ -1,10 +1,6 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/s390.
>
> -dnl It is always possible to access static and hidden symbols in an
> -dnl position independent way.
> -AC_DEFINE(PI_STATIC_AND_HIDDEN)
> -
> AC_CACHE_CHECK(for __builtin_tbegin, libc_cv_gcc_builtin_tbegin, [dnl
> cat > conftest.c <<\EOF
> #include <htmintrin.h>
Ok.
> diff --git a/sysdeps/sh/configure b/sysdeps/sh/configure
> index 110eb65b06..3c05bb6b5e 100644
> --- a/sysdeps/sh/configure
> +++ b/sysdeps/sh/configure
> @@ -1,5 +1,2 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/sh.
> -
> -$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> -
> diff --git a/sysdeps/sh/configure.ac b/sysdeps/sh/configure.ac
> index 21400c447d..28d9e9a438 100644
> --- a/sysdeps/sh/configure.ac
> +++ b/sysdeps/sh/configure.ac
> @@ -1,6 +1,2 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/sh.
> -
> -dnl It is always possible to access static and hidden symbols in an
> -dnl position independent way.
> -AC_DEFINE(PI_STATIC_AND_HIDDEN)
Ok.
> diff --git a/sysdeps/sparc/configure b/sysdeps/sparc/configure
> index 491b00f0dc..70c084db5c 100644
> --- a/sysdeps/sparc/configure
> +++ b/sysdeps/sparc/configure
> @@ -1,4 +1,2 @@
> # This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> # Local configure fragment for sysdeps/sparc.
> -
> -$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> diff --git a/sysdeps/sparc/configure.ac b/sysdeps/sparc/configure.ac
> index 5cdc0a984c..4fc6d6d7d1 100644
> --- a/sysdeps/sparc/configure.ac
> +++ b/sysdeps/sparc/configure.ac
> @@ -1,4 +1,2 @@
> GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> # Local configure fragment for sysdeps/sparc.
> -
> -AC_DEFINE(PI_STATIC_AND_HIDDEN)
Ok.
> diff --git a/sysdeps/x86/configure b/sysdeps/x86/configure
> index 46d436fddf..a9c8c2ef67 100644
> --- a/sysdeps/x86/configure
> +++ b/sysdeps/x86/configure
> @@ -190,8 +190,5 @@ fi
> config_vars="$config_vars
> enable-x86-isa-level = $libc_cv_include_x86_isa_level"
>
> -$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> -
> -
> $as_echo "#define SUPPORT_STATIC_PIE 1" >>confdefs.h
>
> diff --git a/sysdeps/x86/configure.ac b/sysdeps/x86/configure.ac
> index 918b636891..edd43a2551 100644
> --- a/sysdeps/x86/configure.ac
> +++ b/sysdeps/x86/configure.ac
> @@ -128,9 +128,5 @@ if test $libc_cv_include_x86_isa_level = yes; then
> fi
> LIBC_CONFIG_VAR([enable-x86-isa-level], [$libc_cv_include_x86_isa_level])
>
> -dnl It is always possible to access static and hidden symbols in an
> -dnl position independent way.
> -AC_DEFINE(PI_STATIC_AND_HIDDEN)
> -
> dnl Static PIE is supported.
> AC_DEFINE(SUPPORT_STATIC_PIE)
Ok.
On 25/04/2022 13:40, Adhemerval Zanella wrote:
>
>
> On 25/04/2022 04:58, Fangrui Song wrote:
>> PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
>> variables and hidden visibility variables in a shared object (ld.so)
>> need dynamic relocations (usually R_*_RELATIVE). PI (position
>> independent) in the macro name is a misnomer: a code sequence using GOT
>> is typically position-independent as well, but using dynamic relocations
>> does not meet the requirement.
>>
>> Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
>> ports will define PI_STATIC_AND_HIDDEN. Current ports defining
>> PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
>> default.
>>
>> No functional change.
>>
>> Note: HIDDEN_VAR_NEEDS_DYNAMIC_RELOC will be removed when Alan Modra's
>> powerpc64 static-pie work
>> (https://sourceware.org/pipermail/libc-alpha/2022-April/137987.html)
>> lands.
>
> I agree the macro naming is confusing and does not represent the intent
> is a straigthforward manner. Patch looks ok, but I have added some
> comments below.
>
>> ---
>> config.h.in | 6 +-
>> elf/rtld.c | 2 +-
>> sysdeps/aarch64/configure | 5 -
>> sysdeps/aarch64/configure.ac | 4 -
>> sysdeps/alpha/configure | 5 -
>> sysdeps/alpha/configure.ac | 4 -
>> sysdeps/arc/configure | 2 -
>> sysdeps/arc/configure.ac | 1 -
>> sysdeps/arm/configure | 3 -
>> sysdeps/arm/configure.ac | 5 -
>> sysdeps/csky/configure | 3 -
>> sysdeps/csky/configure.ac | 2 -
>> sysdeps/hppa/configure | 3 +
>> sysdeps/hppa/configure.ac | 2 +
>> sysdeps/ia64/configure | 3 -
>> sysdeps/ia64/configure.ac | 4 -
>> sysdeps/m68k/configure | 165 +++++++++++++++++++++++++
>> sysdeps/m68k/configure.ac | 6 +
>> sysdeps/microblaze/configure | 3 +
>> sysdeps/microblaze/configure.ac | 2 +
>> sysdeps/mips/configure | 2 +
>> sysdeps/mips/configure.ac | 2 +-
>> sysdeps/nios2/configure | 3 +
>> sysdeps/nios2/configure.ac | 2 +
>> sysdeps/or1k/configure | 3 -
>> sysdeps/or1k/configure.ac | 2 -
>> sysdeps/powerpc/powerpc32/configure | 3 +
>> sysdeps/powerpc/powerpc32/configure.ac | 2 +
>> sysdeps/powerpc/powerpc64/configure | 3 +
>> sysdeps/powerpc/powerpc64/configure.ac | 2 +
>> sysdeps/powerpc/tst-tlsifunc.c | 2 +-
>> sysdeps/riscv/configure | 3 -
>> sysdeps/riscv/configure.ac | 2 -
>> sysdeps/s390/configure | 3 -
>> sysdeps/s390/configure.ac | 4 -
>> sysdeps/sh/configure | 3 -
>> sysdeps/sh/configure.ac | 4 -
>> sysdeps/sparc/configure | 2 -
>> sysdeps/sparc/configure.ac | 2 -
>> sysdeps/x86/configure | 3 -
>> sysdeps/x86/configure.ac | 4 -
>> 41 files changed, 204 insertions(+), 82 deletions(-)
>> create mode 100644 sysdeps/m68k/configure
>> create mode 100644 sysdeps/m68k/configure.ac
>>
>> diff --git a/config.h.in b/config.h.in
>> index a94f756859..916465fce8 100644
>> --- a/config.h.in
>> +++ b/config.h.in
>> @@ -84,9 +84,9 @@
>> /* Define if the compiler\'s exception support is based on libunwind. */
>> #undef HAVE_CC_WITH_LIBUNWIND
>>
>> -/* Define if the access to static and hidden variables is position independent
>> - and does not need relocations. */
>> -#undef PI_STATIC_AND_HIDDEN
>> +/* Define if the accesses to static and hidden variables in a shared object
>> + need dynamic relocations. */
>> +#undef HIDDEN_VAR_NEEDS_DYNAMIC_RELOC
>>
>> /* Define this to disable the 'hidden_proto' et al macros in
>> include/libc-symbols.h that avoid PLT slots in PIE. */
>
> OK, naming make more sense now.
>
>> diff --git a/elf/rtld.c b/elf/rtld.c
>> index 19e328f89e..2174cc1da7 100644
>> --- a/elf/rtld.c
>> +++ b/elf/rtld.c
>> @@ -424,7 +424,7 @@ DL_SYSINFO_IMPLEMENTATION
>> is fine, too. The latter is important here. We can avoid setting
>> up a temporary link map for ld.so if we can mark _rtld_global as
>> hidden. */
>> -#ifdef PI_STATIC_AND_HIDDEN
>> +#ifndef HIDDEN_VAR_NEEDS_DYNAMIC_RELOC
>> # define DONT_USE_BOOTSTRAP_MAP 1
>> #endif
>>
>
> I think it would be better to now always assume the variable is defined:
>
> #if HIDDEN_VAR_NEEDS_DYNAMIC_RELOC
> # define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1
> #endif
Thinking twice there is not how config.h work now so it is ok as is. The
only issue with the patch is only the m68k configure that seems bogus.
@@ -84,9 +84,9 @@
/* Define if the compiler\'s exception support is based on libunwind. */
#undef HAVE_CC_WITH_LIBUNWIND
-/* Define if the access to static and hidden variables is position independent
- and does not need relocations. */
-#undef PI_STATIC_AND_HIDDEN
+/* Define if the accesses to static and hidden variables in a shared object
+ need dynamic relocations. */
+#undef HIDDEN_VAR_NEEDS_DYNAMIC_RELOC
/* Define this to disable the 'hidden_proto' et al macros in
include/libc-symbols.h that avoid PLT slots in PIE. */
@@ -424,7 +424,7 @@ DL_SYSINFO_IMPLEMENTATION
is fine, too. The latter is important here. We can avoid setting
up a temporary link map for ld.so if we can mark _rtld_global as
hidden. */
-#ifdef PI_STATIC_AND_HIDDEN
+#ifndef HIDDEN_VAR_NEEDS_DYNAMIC_RELOC
# define DONT_USE_BOOTSTRAP_MAP 1
#endif
@@ -1,11 +1,6 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/aarch64.
-# Static and hidden objects are accessed without dynamic relocations.
-# The exception is -mcmodel=large which is unsupported with PIC/PIE.
-$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-
-
# Static PIE is supported.
$as_echo "#define SUPPORT_STATIC_PIE 1" >>confdefs.h
@@ -1,10 +1,6 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/aarch64.
-# Static and hidden objects are accessed without dynamic relocations.
-# The exception is -mcmodel=large which is unsupported with PIC/PIE.
-AC_DEFINE(PI_STATIC_AND_HIDDEN)
-
# Static PIE is supported.
AC_DEFINE(SUPPORT_STATIC_PIE)
@@ -1,11 +1,6 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/alpha.
-# With required gcc+binutils, we can always access static and hidden
-# symbols in a position independent way.
-$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-
-
# PIE builds fail on binutils 2.37 and earlier, see:
# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
$as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
@@ -1,10 +1,6 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/alpha.
-# With required gcc+binutils, we can always access static and hidden
-# symbols in a position independent way.
-AC_DEFINE(PI_STATIC_AND_HIDDEN)
-
# PIE builds fail on binutils 2.37 and earlier, see:
# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
AC_DEFINE(PIE_UNSUPPORTED)
@@ -1,8 +1,6 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/arc.
-$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-
libc_cv_have_sdata_section=no
# For ARC, historically ; was used for comments and not newline
@@ -1,7 +1,6 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/arc.
-AC_DEFINE(PI_STATIC_AND_HIDDEN)
libc_cv_have_sdata_section=no
# For ARC, historically ; was used for comments and not newline
@@ -1,9 +1,6 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/arm.
-$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-
-
# We check to see if the compiler and flags are
# selecting the hard-float ABI and if they are then
# we set libc_cv_arm_pcs_vfp to yes which causes
@@ -1,11 +1,6 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/arm.
-dnl It is always possible to access static and hidden symbols in an
-dnl position independent way. This has been true since GCC 4.1,
-dnl which is older than the minimum version required to build libc.
-AC_DEFINE(PI_STATIC_AND_HIDDEN)
-
# We check to see if the compiler and flags are
# selecting the hard-float ABI and if they are then
# we set libc_cv_arm_pcs_vfp to yes which causes
@@ -1,9 +1,6 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/csky.
-$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-
-
# PIE builds fail on binutils 2.37 and earlier, see:
# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
$as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
@@ -1,8 +1,6 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/csky.
-AC_DEFINE(PI_STATIC_AND_HIDDEN)
-
# PIE builds fail on binutils 2.37 and earlier, see:
# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
AC_DEFINE(PIE_UNSUPPORTED)
@@ -32,6 +32,9 @@ cat >>confdefs.h <<_ACEOF
_ACEOF
+$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
+
+
# PIE builds fail on binutils 2.37 and earlier, see:
# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
$as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
@@ -20,6 +20,8 @@ fi
rm -f conftest*])
AC_DEFINE_UNQUOTED(ASM_LINE_SEP, $libc_cv_asm_line_sep)
+AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
+
# PIE builds fail on binutils 2.37 and earlier, see:
# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
AC_DEFINE(PIE_UNSUPPORTED)
@@ -1,9 +1,6 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/ia64.
-$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-
-
# PIE builds fail on binutils 2.37 and earlier, see:
# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
$as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
@@ -1,10 +1,6 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/ia64.
-dnl It is always possible to access static and hidden symbols in an
-dnl position independent way.
-AC_DEFINE(PI_STATIC_AND_HIDDEN)
-
# PIE builds fail on binutils 2.37 and earlier, see:
# https://sourceware.org/bugzilla/show_bug.cgi?id=28672
AC_DEFINE(PIE_UNSUPPORTED)
new file mode 100644
@@ -0,0 +1,165 @@
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
+ # Local configure fragment for sysdeps/nios2.
+
+# Nios II big endian is not yet supported.
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for big endian" >&5
+$as_echo_n "checking for big endian... " >&6; }
+if ${libc_cv_nios2_be+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __nios2_big_endian__
+ yes
+ #endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "yes" >/dev/null 2>&1; then :
+ libc_cv_nios2_be=yes
+else
+ libc_cv_nios2_be=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_nios2_be" >&5
+$as_echo "$libc_cv_nios2_be" >&6; }
+if test $libc_cv_nios2_be = yes; then
+ as_fn_error $? "Big endian not supported for Nios II" "$LINENO" 5
+fi
+
+$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
+
new file mode 100644
@@ -0,0 +1,6 @@
+GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
+# Local configure fragment for sysdeps/m68k.
+
+# Accessing static and hidden variables in a shared object needs relative
+# relocation.
+AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
@@ -1,6 +1,9 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/microblaze.
+$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
+
+
# gcc 11.2.1 and earlier crash with an internal compiler error, see:
# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103613
$as_echo "#define PIE_UNSUPPORTED 1" >>confdefs.h
@@ -1,6 +1,8 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/microblaze.
+AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
+
# gcc 11.2.1 and earlier crash with an internal compiler error, see:
# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103613
AC_DEFINE(PIE_UNSUPPORTED)
@@ -1,6 +1,8 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/mips.
+$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
+
@@ -3,7 +3,7 @@ GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
dnl No MIPS GCC supports accessing static and hidden symbols in an
dnl position independent way.
-dnl AC_DEFINE(PI_STATIC_AND_HIDDEN)
+AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
AC_CACHE_CHECK([whether the compiler is using the 2008 NaN encoding],
libc_cv_mips_nan2008, [AC_EGREP_CPP(yes, [dnl
@@ -160,3 +160,6 @@ $as_echo "$libc_cv_nios2_be" >&6; }
if test $libc_cv_nios2_be = yes; then
as_fn_error $? "Big endian not supported for Nios II" "$LINENO" 5
fi
+
+$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
+
@@ -11,3 +11,5 @@ AC_CACHE_CHECK([for big endian],
if test $libc_cv_nios2_be = yes; then
AC_MSG_ERROR([Big endian not supported for Nios II])
fi
+
+AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
@@ -1,5 +1,2 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/or1k.
-
-$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-
@@ -1,4 +1,2 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/or1k.
-
-AC_DEFINE(PI_STATIC_AND_HIDDEN)
@@ -1,6 +1,9 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/powerpc/powerpc32.
+$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
+
+
# See whether GCC uses -msecure-plt.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -msecure-plt by default" >&5
$as_echo_n "checking for -msecure-plt by default... " >&6; }
@@ -1,6 +1,8 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/powerpc/powerpc32.
+AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
+
# See whether GCC uses -msecure-plt.
AC_CACHE_CHECK(for -msecure-plt by default, libc_cv_ppc_secure_plt, [dnl
echo 'int foo (void) { extern int bar; return bar; }' > conftest.c
@@ -1,6 +1,9 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/powerpc/powerpc64.
+$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for support for overlapping .opd entries" >&5
$as_echo_n "checking for support for overlapping .opd entries... " >&6; }
if ${libc_cv_overlapping_opd+:} false; then :
@@ -1,6 +1,8 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/powerpc/powerpc64.
+AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
+
AC_CACHE_CHECK(for support for overlapping .opd entries,
libc_cv_overlapping_opd, [dnl
libc_cv_overlapping_opd=no
@@ -102,7 +102,7 @@ do_test (void)
if (&bar == bar_ptr)
printf ("PASS: bar address read from IFUNC resolver is correct.\n");
#if !defined TST_TLSIFUNC_STATIC || !defined PIC \
- || !defined PI_STATIC_AND_HIDDEN
+ || defined HIDDEN_VAR_NEEDS_DYNAMIC_RELOC
else
{
printf ("FAIL: bar address read from IFUNC resolver is incorrect.\n");
@@ -1,9 +1,6 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/riscv/elf.
-$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-
-
# Check if static linker supports R_RISCV_ALIGN
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for R_RISCV_ALIGN linker relaxation support" >&5
$as_echo_n "checking for R_RISCV_ALIGN linker relaxation support... " >&6; }
@@ -1,8 +1,6 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/riscv/elf.
-AC_DEFINE(PI_STATIC_AND_HIDDEN)
-
# Check if static linker supports R_RISCV_ALIGN
AC_CACHE_CHECK([for R_RISCV_ALIGN linker relaxation support], [libc_cv_riscv_r_align],[dnl
cat > conftest.S <<EOF
@@ -1,9 +1,6 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/s390.
-$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for __builtin_tbegin" >&5
$as_echo_n "checking for __builtin_tbegin... " >&6; }
if ${libc_cv_gcc_builtin_tbegin+:} false; then :
@@ -1,10 +1,6 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/s390.
-dnl It is always possible to access static and hidden symbols in an
-dnl position independent way.
-AC_DEFINE(PI_STATIC_AND_HIDDEN)
-
AC_CACHE_CHECK(for __builtin_tbegin, libc_cv_gcc_builtin_tbegin, [dnl
cat > conftest.c <<\EOF
#include <htmintrin.h>
@@ -1,5 +1,2 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/sh.
-
-$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-
@@ -1,6 +1,2 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/sh.
-
-dnl It is always possible to access static and hidden symbols in an
-dnl position independent way.
-AC_DEFINE(PI_STATIC_AND_HIDDEN)
@@ -1,4 +1,2 @@
# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/sparc.
-
-$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
@@ -1,4 +1,2 @@
GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
# Local configure fragment for sysdeps/sparc.
-
-AC_DEFINE(PI_STATIC_AND_HIDDEN)
@@ -190,8 +190,5 @@ fi
config_vars="$config_vars
enable-x86-isa-level = $libc_cv_include_x86_isa_level"
-$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-
-
$as_echo "#define SUPPORT_STATIC_PIE 1" >>confdefs.h
@@ -128,9 +128,5 @@ if test $libc_cv_include_x86_isa_level = yes; then
fi
LIBC_CONFIG_VAR([enable-x86-isa-level], [$libc_cv_include_x86_isa_level])
-dnl It is always possible to access static and hidden symbols in an
-dnl position independent way.
-AC_DEFINE(PI_STATIC_AND_HIDDEN)
-
dnl Static PIE is supported.
AC_DEFINE(SUPPORT_STATIC_PIE)