diff mbox series

[v3,1/2] x86: Optimize strlen-evex.S

Message ID 20210419162859.2285431-1-goldstein.w.n@gmail.com
State Superseded
Headers show
Series [v3,1/2] x86: Optimize strlen-evex.S | expand

Commit Message

Noah Goldstein April 19, 2021, 4:28 p.m. UTC
No bug. This commit optimizes strlen-evex.S. The
optimizations are mostly small things but they add up to roughly
10-30% performance improvement for strlen. The results for strnlen are
bit more ambiguous. test-strlen, test-strnlen, test-wcslen, and
test-wcsnlen are all passing.

Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
---
 sysdeps/x86_64/multiarch/strlen-evex.S | 584 ++++++++++++++-----------
 1 file changed, 320 insertions(+), 264 deletions(-)
diff mbox series

Patch

diff --git a/sysdeps/x86_64/multiarch/strlen-evex.S b/sysdeps/x86_64/multiarch/strlen-evex.S
index 0583819078..36b28198c8 100644
--- a/sysdeps/x86_64/multiarch/strlen-evex.S
+++ b/sysdeps/x86_64/multiarch/strlen-evex.S
@@ -29,11 +29,13 @@ 
 # ifdef USE_AS_WCSLEN
 #  define VPCMP		vpcmpd
 #  define VPMINU	vpminud
-#  define SHIFT_REG	r9d
+#  define SHIFT_REG ecx
+#  define CHAR_SIZE	4
 # else
 #  define VPCMP		vpcmpb
 #  define VPMINU	vpminub
-#  define SHIFT_REG	ecx
+#  define SHIFT_REG edx
+#  define CHAR_SIZE	1
 # endif
 
 # define XMMZERO	xmm16
@@ -46,132 +48,168 @@ 
 # define YMM6		ymm22
 
 # define VEC_SIZE 32
+# define PAGE_SIZE 4096
+# define LOG_PAGE_SIZE 12
+# define CHAR_PER_VEC (VEC_SIZE / CHAR_SIZE)
 
 	.section .text.evex,"ax",@progbits
 ENTRY (STRLEN)
 # ifdef USE_AS_STRNLEN
-	/* Check for zero length.  */
+	/* Check zero length.  */
 	test	%RSI_LP, %RSI_LP
 	jz	L(zero)
-#  ifdef USE_AS_WCSLEN
-	shl	$2, %RSI_LP
-#  elif defined __ILP32__
+#  ifdef __ILP32__
 	/* Clear the upper 32 bits.  */
 	movl	%esi, %esi
 #  endif
 	mov	%RSI_LP, %R8_LP
 # endif
-	movl	%edi, %ecx
-	movq	%rdi, %rdx
+	movl	%edi, %eax
 	vpxorq	%XMMZERO, %XMMZERO, %XMMZERO
-
+	/* Shift left eax to clear all bits not relevant to page cross
+	   check. This saves 2 bytes of code as opposed to using andl with
+	   PAGE_SIZE - 1. Then compare with PAGE_SIZE - VEC_SIZE shifted
+	   left by the same amount (an imm32 either way).  */
+	sall	$(32 - LOG_PAGE_SIZE), %eax
 	/* Check if we may cross page boundary with one vector load.  */
-	andl	$(2 * VEC_SIZE - 1), %ecx
-	cmpl	$VEC_SIZE, %ecx
-	ja	L(cros_page_boundary)
+	cmpl	$((PAGE_SIZE - VEC_SIZE) << (32 - LOG_PAGE_SIZE)), %eax
+	ja	L(cross_page_boundary)
 
 	/* Check the first VEC_SIZE bytes.  Each bit in K0 represents a
 	   null byte.  */
 	VPCMP	$0, (%rdi), %YMMZERO, %k0
 	kmovd	%k0, %eax
-	testl	%eax, %eax
-
 # ifdef USE_AS_STRNLEN
-	jnz	L(first_vec_x0_check)
-	/* Adjust length and check the end of data.  */
-	subq	$VEC_SIZE, %rsi
-	jbe	L(max)
-# else
-	jnz	L(first_vec_x0)
+	/* If length < CHAR_PER_VEC handle special.  */
+	cmpq	$CHAR_PER_VEC, %rsi
+	jbe	L(first_vec_x0)
 # endif
-
-	/* Align data for aligned loads in the loop.  */
-	addq	$VEC_SIZE, %rdi
-	andl	$(VEC_SIZE - 1), %ecx
-	andq	$-VEC_SIZE, %rdi
-
+	testl	%eax, %eax
+	jz	L(aligned_more)
+	tzcntl	%eax, %eax
+	ret
 # ifdef USE_AS_STRNLEN
-	/* Adjust length.  */
-	addq	%rcx, %rsi
+L(zero):
+	xorl	%eax, %eax
+	ret
 
-	subq	$(VEC_SIZE * 4), %rsi
-	jbe	L(last_4x_vec_or_less)
+	.p2align 4
+L(first_vec_x0):
+	/* Set bit for max len so that tzcnt will return min of max len
+	   and position of first match.  */
+	btsq	%rsi, %rax
+	tzcntl	%eax, %eax
+	ret
 # endif
-	jmp	L(more_4x_vec)
 
 	.p2align 4
-L(cros_page_boundary):
-	andl	$(VEC_SIZE - 1), %ecx
-	andq	$-VEC_SIZE, %rdi
-
-# ifdef USE_AS_WCSLEN
-	/* NB: Divide shift count by 4 since each bit in K0 represent 4
-	   bytes.  */
-	movl	%ecx, %SHIFT_REG
-	sarl	$2, %SHIFT_REG
+L(first_vec_x1):
+	tzcntl	%eax, %eax
+	/* Safe to use 32 bit instructions as these are only called for
+	   size = [1, 159].  */
+# ifdef USE_AS_STRNLEN
+	/* Use ecx which was computed earlier to compute correct value.
+	 */
+	leal	-(CHAR_PER_VEC * 4 + 1)(%rcx, %rax), %eax
+# else
+	subl	%edx, %edi
+#  ifdef USE_AS_WCSLEN
+	/* NB: Divide bytes by 4 to get the wchar_t count.  */
+	sarl	$2, %edi
+#  endif
+	leal	CHAR_PER_VEC(%rdi, %rax), %eax
 # endif
-	VPCMP	$0, (%rdi), %YMMZERO, %k0
-	kmovd	%k0, %eax
+	ret
 
-	/* Remove the leading bytes.  */
-	sarxl	%SHIFT_REG, %eax, %eax
-	testl	%eax, %eax
-	jz	L(aligned_more)
+	.p2align 4
+L(first_vec_x2):
 	tzcntl	%eax, %eax
-# ifdef USE_AS_WCSLEN
-	/* NB: Multiply wchar_t count by 4 to get the number of bytes.  */
-	sall	$2, %eax
-# endif
+	/* Safe to use 32 bit instructions as these are only called for
+	   size = [1, 159].  */
 # ifdef USE_AS_STRNLEN
-	/* Check the end of data.  */
-	cmpq	%rax, %rsi
-	jbe	L(max)
-# endif
-	addq	%rdi, %rax
-	addq	%rcx, %rax
-	subq	%rdx, %rax
-# ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
+	/* Use ecx which was computed earlier to compute correct value.
+	 */
+	leal	-(CHAR_PER_VEC * 3 + 1)(%rcx, %rax), %eax
+# else
+	subl	%edx, %edi
+#  ifdef USE_AS_WCSLEN
+	/* NB: Divide bytes by 4 to get the wchar_t count.  */
+	sarl	$2, %edi
+#  endif
+	leal	(CHAR_PER_VEC * 2)(%rdi, %rax), %eax
 # endif
 	ret
 
 	.p2align 4
-L(aligned_more):
+L(first_vec_x3):
+	tzcntl	%eax, %eax
+	/* Safe to use 32 bit instructions as these are only called for
+	   size = [1, 159].  */
 # ifdef USE_AS_STRNLEN
-        /* "rcx" is less than VEC_SIZE.  Calculate "rdx + rcx - VEC_SIZE"
-	    with "rdx - (VEC_SIZE - rcx)" instead of "(rdx + rcx) - VEC_SIZE"
-	    to void possible addition overflow.  */
-	negq	%rcx
-	addq	$VEC_SIZE, %rcx
-
-	/* Check the end of data.  */
-	subq	%rcx, %rsi
-	jbe	L(max)
+	/* Use ecx which was computed earlier to compute correct value.
+	 */
+	leal	-(CHAR_PER_VEC * 2 + 1)(%rcx, %rax), %eax
+# else
+	subl	%edx, %edi
+#  ifdef USE_AS_WCSLEN
+	/* NB: Divide bytes by 4 to get the wchar_t count.  */
+	sarl	$2, %edi
+#  endif
+	leal	(CHAR_PER_VEC * 3)(%rdi, %rax), %eax
 # endif
+	ret
 
-	addq	$VEC_SIZE, %rdi
-
+	.p2align 4
+L(first_vec_x4):
+	tzcntl	%eax, %eax
+	/* Safe to use 32 bit instructions as these are only called for
+	   size = [1, 159].  */
 # ifdef USE_AS_STRNLEN
-	subq	$(VEC_SIZE * 4), %rsi
-	jbe	L(last_4x_vec_or_less)
+	/* Use ecx which was computed earlier to compute correct value.
+	 */
+	leal	-(CHAR_PER_VEC + 1)(%rcx, %rax), %eax
+# else
+	subl	%edx, %edi
+#  ifdef USE_AS_WCSLEN
+	/* NB: Divide bytes by 4 to get the wchar_t count.  */
+	sarl	$2, %edi
+#  endif
+	leal	(CHAR_PER_VEC * 4)(%rdi, %rax), %eax
 # endif
+	ret
 
-L(more_4x_vec):
+	.p2align 5
+L(aligned_more):
+	movq	%rdi, %rdx
+	/* Align data to VEC_SIZE.  */
+	andq	$-(VEC_SIZE), %rdi
+L(cross_page_continue):
 	/* Check the first 4 * VEC_SIZE.  Only one VEC_SIZE at a time
 	   since data is only aligned to VEC_SIZE.  */
-	VPCMP	$0, (%rdi), %YMMZERO, %k0
-	kmovd	%k0, %eax
-	testl	%eax, %eax
-	jnz	L(first_vec_x0)
-
+# ifdef USE_AS_STRNLEN
+	/* + CHAR_SIZE because it simplies the logic in
+	   last_4x_vec_or_less.  */
+	leaq	(VEC_SIZE * 5 + CHAR_SIZE)(%rdi), %rcx
+	subq	%rdx, %rcx
+#  ifdef USE_AS_WCSLEN
+	/* NB: Divide bytes by 4 to get the wchar_t count.  */
+	sarl	$2, %ecx
+#  endif
+# endif
+	/* Load first VEC regardless.  */
 	VPCMP	$0, VEC_SIZE(%rdi), %YMMZERO, %k0
+# ifdef USE_AS_STRNLEN
+	/* Adjust length. If near end handle specially.  */
+	subq	%rcx, %rsi
+	jb	L(last_4x_vec_or_less)
+# endif
 	kmovd	%k0, %eax
 	testl	%eax, %eax
 	jnz	L(first_vec_x1)
 
 	VPCMP	$0, (VEC_SIZE * 2)(%rdi), %YMMZERO, %k0
 	kmovd	%k0, %eax
-	testl	%eax, %eax
+	test	%eax, %eax
 	jnz	L(first_vec_x2)
 
 	VPCMP	$0, (VEC_SIZE * 3)(%rdi), %YMMZERO, %k0
@@ -179,258 +217,276 @@  L(more_4x_vec):
 	testl	%eax, %eax
 	jnz	L(first_vec_x3)
 
-	addq	$(VEC_SIZE * 4), %rdi
-
-# ifdef USE_AS_STRNLEN
-	subq	$(VEC_SIZE * 4), %rsi
-	jbe	L(last_4x_vec_or_less)
-# endif
-
-	/* Align data to 4 * VEC_SIZE.  */
-	movq	%rdi, %rcx
-	andl	$(4 * VEC_SIZE - 1), %ecx
-	andq	$-(4 * VEC_SIZE), %rdi
+	VPCMP	$0, (VEC_SIZE * 4)(%rdi), %YMMZERO, %k0
+	kmovd	%k0, %eax
+	testl	%eax, %eax
+	jnz	L(first_vec_x4)
 
+	addq	$VEC_SIZE, %rdi
 # ifdef USE_AS_STRNLEN
-	/* Adjust length.  */
+	/* Check if at last VEC_SIZE * 4 length.  */
+	cmpq	$(CHAR_PER_VEC * 4 - 1), %rsi
+	jbe	L(last_4x_vec_or_less_load)
+	movl	%edi, %ecx
+	andl	$(VEC_SIZE * 4 - 1), %ecx
+#  ifdef USE_AS_WCSLEN
+	/* NB: Divide bytes by 4 to get the wchar_t count.  */
+	sarl	$2, %ecx
+#  endif
+	/* Readjust length.  */
 	addq	%rcx, %rsi
 # endif
+	/* Align data to VEC_SIZE * 4.  */
+	andq	$-(VEC_SIZE * 4), %rdi
 
+	/* Compare 4 * VEC at a time forward.  */
 	.p2align 4
 L(loop_4x_vec):
-	/* Compare 4 * VEC at a time forward.  */
-	VMOVA	(%rdi), %YMM1
-	VMOVA	VEC_SIZE(%rdi), %YMM2
-	VMOVA	(VEC_SIZE * 2)(%rdi), %YMM3
-	VMOVA	(VEC_SIZE * 3)(%rdi), %YMM4
-
-	VPMINU	%YMM1, %YMM2, %YMM5
-	VPMINU	%YMM3, %YMM4, %YMM6
+	/* Load first VEC regardless.  */
+	VMOVA	(VEC_SIZE * 4)(%rdi), %YMM1
+# ifdef USE_AS_STRNLEN
+	/* Break if at end of length.  */
+	subq	$(CHAR_PER_VEC * 4), %rsi
+	jb	L(last_4x_vec_or_less_cmpeq)
+# endif
+	/* Save some code size by microfusing VPMINU with the load. Since
+	   the matches in ymm2/ymm4 can only be returned if there where no
+	   matches in ymm1/ymm3 respectively there is no issue with overlap.
+	 */
+	VPMINU	(VEC_SIZE * 5)(%rdi), %YMM1, %YMM2
+	VMOVA	(VEC_SIZE * 6)(%rdi), %YMM3
+	VPMINU	(VEC_SIZE * 7)(%rdi), %YMM3, %YMM4
+
+	VPCMP	$0, %YMM2, %YMMZERO, %k0
+	VPCMP	$0, %YMM4, %YMMZERO, %k1
+	subq	$-(VEC_SIZE * 4), %rdi
+	kortestd	%k0, %k1
+	jz	L(loop_4x_vec)
+
+	/* Check if end was in first half.  */
+	kmovd	%k0, %eax
+	subq	%rdx, %rdi
+# ifdef USE_AS_WCSLEN
+	shrq	$2, %rdi
+# endif
+	testl	%eax, %eax
+	jz	L(second_vec_return)
 
-	VPMINU	%YMM5, %YMM6, %YMM5
-	VPCMP	$0, %YMM5, %YMMZERO, %k0
-	ktestd	%k0, %k0
-	jnz	L(4x_vec_end)
+	VPCMP	$0, %YMM1, %YMMZERO, %k2
+	kmovd	%k2, %edx
+	/* Combine VEC1 matches (edx) with VEC2 matches (eax).  */
+# ifdef USE_AS_WCSLEN
+	sall	$CHAR_PER_VEC, %eax
+	orl	%edx, %eax
+	tzcntl	%eax, %eax
+# else
+	salq	$CHAR_PER_VEC, %rax
+	orq	%rdx, %rax
+	tzcntq	%rax, %rax
+# endif
+	addq	%rdi, %rax
+	ret
 
-	addq	$(VEC_SIZE * 4), %rdi
 
-# ifndef USE_AS_STRNLEN
-	jmp	L(loop_4x_vec)
-# else
-	subq	$(VEC_SIZE * 4), %rsi
-	ja	L(loop_4x_vec)
+# ifdef USE_AS_STRNLEN
 
+L(last_4x_vec_or_less_load):
+	/* Depending on entry adjust rdi / prepare first VEC in YMM1.  */
+	VMOVA	(VEC_SIZE * 4)(%rdi), %YMM1
+L(last_4x_vec_or_less_cmpeq):
+	VPCMP	$0, %YMM1, %YMMZERO, %k0
+	addq	$(VEC_SIZE * 3), %rdi
 L(last_4x_vec_or_less):
-	/* Less than 4 * VEC and aligned to VEC_SIZE.  */
-	addl	$(VEC_SIZE * 2), %esi
-	jle	L(last_2x_vec)
-
-	VPCMP	$0, (%rdi), %YMMZERO, %k0
 	kmovd	%k0, %eax
+	/* If remaining length > VEC_SIZE * 2. This works if esi is off by
+	   VEC_SIZE * 4.  */
+	testl	$(CHAR_PER_VEC * 2), %esi
+	jnz	L(last_4x_vec)
+
+	/* length may have been negative or positive by an offset of
+	   CHAR_PER_VEC * 4 depending on where this was called from. This
+	   fixes that.  */
+	andl	$(CHAR_PER_VEC * 4 - 1), %esi
 	testl	%eax, %eax
-	jnz	L(first_vec_x0)
+	jnz	L(last_vec_x1_check)
 
-	VPCMP	$0, VEC_SIZE(%rdi), %YMMZERO, %k0
-	kmovd	%k0, %eax
-	testl	%eax, %eax
-	jnz	L(first_vec_x1)
+	/* Check the end of data.  */
+	subl	$CHAR_PER_VEC, %esi
+	jb	L(max)
 
 	VPCMP	$0, (VEC_SIZE * 2)(%rdi), %YMMZERO, %k0
 	kmovd	%k0, %eax
-	testl	%eax, %eax
-	jnz	L(first_vec_x2_check)
-	subl	$VEC_SIZE, %esi
-	jle	L(max)
+	tzcntl	%eax, %eax
+	/* Check the end of data.  */
+	cmpl	%eax, %esi
+	jb	L(max)
 
-	VPCMP	$0, (VEC_SIZE * 3)(%rdi), %YMMZERO, %k0
-	kmovd	%k0, %eax
-	testl	%eax, %eax
-	jnz	L(first_vec_x3_check)
+	subq	%rdx, %rdi
+#  ifdef USE_AS_WCSLEN
+	/* NB: Divide bytes by 4 to get the wchar_t count.  */
+	sarq	$2, %rdi
+#  endif
+	leaq	(CHAR_PER_VEC * 2)(%rdi, %rax), %rax
+	ret
+L(max):
 	movq	%r8, %rax
+	ret
+# endif
+
+	/* Placed here in strnlen so that the jcc L(last_4x_vec_or_less)
+	   in the 4x VEC loop can use 2 byte encoding.  */
+	.p2align 4
+L(second_vec_return):
+	VPCMP	$0, %YMM3, %YMMZERO, %k0
+	/* Combine YMM3 matches (k0) with YMM4 matches (k1).  */
+# ifdef USE_AS_WCSLEN
+	kunpckbw	%k0, %k1, %k0
+	kmovd	%k0, %eax
+	tzcntl	%eax, %eax
+# else
+	kunpckdq	%k0, %k1, %k0
+	kmovq	%k0, %rax
+	tzcntq	%rax, %rax
+# endif
+	leaq	(CHAR_PER_VEC * 2)(%rdi, %rax), %rax
+	ret
+
+
+# ifdef USE_AS_STRNLEN
+L(last_vec_x1_check):
+	tzcntl	%eax, %eax
+	/* Check the end of data.  */
+	cmpl	%eax, %esi
+	jb	L(max)
+	subq	%rdx, %rdi
 #  ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
+	/* NB: Divide bytes by 4 to get the wchar_t count.  */
+	sarq	$2, %rdi
 #  endif
+	leaq	(CHAR_PER_VEC)(%rdi, %rax), %rax
 	ret
 
 	.p2align 4
-L(last_2x_vec):
-	addl	$(VEC_SIZE * 2), %esi
+L(last_4x_vec):
+	/* Test first 2x VEC normally.  */
+	testl	%eax, %eax
+	jnz	L(last_vec_x1)
 
-	VPCMP	$0, (%rdi), %YMMZERO, %k0
+	VPCMP	$0, (VEC_SIZE * 2)(%rdi), %YMMZERO, %k0
 	kmovd	%k0, %eax
 	testl	%eax, %eax
-	jnz	L(first_vec_x0_check)
-	subl	$VEC_SIZE, %esi
-	jle	L(max)
+	jnz	L(last_vec_x2)
 
-	VPCMP	$0, VEC_SIZE(%rdi), %YMMZERO, %k0
+	/* Normalize length.  */
+	andl	$(CHAR_PER_VEC * 4 - 1), %esi
+	VPCMP	$0, (VEC_SIZE * 3)(%rdi), %YMMZERO, %k0
 	kmovd	%k0, %eax
 	testl	%eax, %eax
-	jnz	L(first_vec_x1_check)
-	movq	%r8, %rax
-#  ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
-#  endif
-	ret
+	jnz	L(last_vec_x3)
 
-	.p2align 4
-L(first_vec_x0_check):
+	/* Check the end of data.  */
+	subl	$(CHAR_PER_VEC * 3), %esi
+	jb	L(max)
+
+	VPCMP	$0, (VEC_SIZE * 4)(%rdi), %YMMZERO, %k0
+	kmovd	%k0, %eax
 	tzcntl	%eax, %eax
-#  ifdef USE_AS_WCSLEN
-	/* NB: Multiply wchar_t count by 4 to get the number of bytes.  */
-	sall	$2, %eax
-#  endif
 	/* Check the end of data.  */
-	cmpq	%rax, %rsi
-	jbe	L(max)
-	addq	%rdi, %rax
-	subq	%rdx, %rax
+	cmpl	%eax, %esi
+	jb	L(max_end)
+
+	subq	%rdx, %rdi
 #  ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
+	/* NB: Divide bytes by 4 to get the wchar_t count.  */
+	sarq	$2, %rdi
 #  endif
+	leaq	(CHAR_PER_VEC * 4)(%rdi, %rax), %rax
 	ret
 
 	.p2align 4
-L(first_vec_x1_check):
+L(last_vec_x1):
 	tzcntl	%eax, %eax
+	subq	%rdx, %rdi
 #  ifdef USE_AS_WCSLEN
-	/* NB: Multiply wchar_t count by 4 to get the number of bytes.  */
-	sall	$2, %eax
-#  endif
-	/* Check the end of data.  */
-	cmpq	%rax, %rsi
-	jbe	L(max)
-	addq	$VEC_SIZE, %rax
-	addq	%rdi, %rax
-	subq	%rdx, %rax
-#  ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
+	/* NB: Divide bytes by 4 to get the wchar_t count.  */
+	sarq	$2, %rdi
 #  endif
+	leaq	(CHAR_PER_VEC)(%rdi, %rax), %rax
 	ret
 
 	.p2align 4
-L(first_vec_x2_check):
+L(last_vec_x2):
 	tzcntl	%eax, %eax
+	subq	%rdx, %rdi
 #  ifdef USE_AS_WCSLEN
-	/* NB: Multiply wchar_t count by 4 to get the number of bytes.  */
-	sall	$2, %eax
-#  endif
-	/* Check the end of data.  */
-	cmpq	%rax, %rsi
-	jbe	L(max)
-	addq	$(VEC_SIZE * 2), %rax
-	addq	%rdi, %rax
-	subq	%rdx, %rax
-#  ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
+	/* NB: Divide bytes by 4 to get the wchar_t count.  */
+	sarq	$2, %rdi
 #  endif
+	leaq	(CHAR_PER_VEC * 2)(%rdi, %rax), %rax
 	ret
 
 	.p2align 4
-L(first_vec_x3_check):
+L(last_vec_x3):
 	tzcntl	%eax, %eax
-#  ifdef USE_AS_WCSLEN
-	/* NB: Multiply wchar_t count by 4 to get the number of bytes.  */
-	sall	$2, %eax
-#  endif
+	subl	$(CHAR_PER_VEC * 2), %esi
 	/* Check the end of data.  */
-	cmpq	%rax, %rsi
-	jbe	L(max)
-	addq	$(VEC_SIZE * 3), %rax
-	addq	%rdi, %rax
-	subq	%rdx, %rax
+	cmpl	%eax, %esi
+	jb	L(max_end)
+	subq	%rdx, %rdi
 #  ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
+	/* NB: Divide bytes by 4 to get the wchar_t count.  */
+	sarq	$2, %rdi
 #  endif
+	leaq	(CHAR_PER_VEC * 3)(%rdi, %rax), %rax
 	ret
-
-	.p2align 4
-L(max):
+L(max_end):
 	movq	%r8, %rax
-#  ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
-#  endif
-	ret
-
-	.p2align 4
-L(zero):
-	xorl	%eax, %eax
 	ret
 # endif
 
+	/* Cold case for crossing page with first load.	 */
 	.p2align 4
-L(first_vec_x0):
-	tzcntl	%eax, %eax
-# ifdef USE_AS_WCSLEN
-	/* NB: Multiply wchar_t count by 4 to get the number of bytes.  */
-	sall	$2, %eax
-# endif
-	addq	%rdi, %rax
-	subq	%rdx, %rax
+L(cross_page_boundary):
+	movq	%rdi, %rdx
+	/* Align data to VEC_SIZE.  */
+	andq	$-VEC_SIZE, %rdi
+	VPCMP	$0, (%rdi), %YMMZERO, %k0
+	kmovd	%k0, %eax
+	/* Remove the leading bytes.  */
 # ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
+	/* NB: Divide shift count by 4 since each bit in K0 represent 4
+	   bytes.  */
+	movl	%edx, %ecx
+	shrl	$2, %ecx
+	andl	$(CHAR_PER_VEC - 1), %ecx
 # endif
-	ret
-
-	.p2align 4
-L(first_vec_x1):
+	/* SHIFT_REG is ecx for USE_AS_WCSLEN and edx otherwise.  */
+	sarxl	%SHIFT_REG, %eax, %eax
+	testl	%eax, %eax
+# ifndef USE_AS_STRNLEN
+	jz	L(cross_page_continue)
 	tzcntl	%eax, %eax
-# ifdef USE_AS_WCSLEN
-	/* NB: Multiply wchar_t count by 4 to get the number of bytes.  */
-	sall	$2, %eax
-# endif
-	addq	$VEC_SIZE, %rax
-	addq	%rdi, %rax
-	subq	%rdx, %rax
-# ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
-# endif
 	ret
-
-	.p2align 4
-L(first_vec_x2):
-	tzcntl	%eax, %eax
-# ifdef USE_AS_WCSLEN
-	/* NB: Multiply wchar_t count by 4 to get the number of bytes.  */
-	sall	$2, %eax
-# endif
-	addq	$(VEC_SIZE * 2), %rax
-	addq	%rdi, %rax
-	subq	%rdx, %rax
-# ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
-# endif
+# else
+	jnz	L(cross_page_less_vec)
+#  ifndef USE_AS_WCSLEN
+	movl	%edx, %ecx
+	andl	$(CHAR_PER_VEC - 1), %ecx
+#  endif
+	movl	$CHAR_PER_VEC, %eax
+	subl	%ecx, %eax
+	/* Check the end of data.  */
+	cmpq	%rax, %rsi
+	ja	L(cross_page_continue)
+	movl	%esi, %eax
 	ret
-
-	.p2align 4
-L(4x_vec_end):
-	VPCMP	$0, %YMM1, %YMMZERO, %k0
-	kmovd	%k0, %eax
-	testl	%eax, %eax
-	jnz	L(first_vec_x0)
-	VPCMP	$0, %YMM2, %YMMZERO, %k1
-	kmovd	%k1, %eax
-	testl	%eax, %eax
-	jnz	L(first_vec_x1)
-	VPCMP	$0, %YMM3, %YMMZERO, %k2
-	kmovd	%k2, %eax
-	testl	%eax, %eax
-	jnz	L(first_vec_x2)
-	VPCMP	$0, %YMM4, %YMMZERO, %k3
-	kmovd	%k3, %eax
-L(first_vec_x3):
+L(cross_page_less_vec):
 	tzcntl	%eax, %eax
-# ifdef USE_AS_WCSLEN
-	/* NB: Multiply wchar_t count by 4 to get the number of bytes.  */
-	sall	$2, %eax
-# endif
-	addq	$(VEC_SIZE * 3), %rax
-	addq	%rdi, %rax
-	subq	%rdx, %rax
-# ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
-# endif
+	/* Select min of length and position of first null.  */
+	cmpq	%rax, %rsi
+	cmovb	%esi, %eax
 	ret
+# endif
 
 END (STRLEN)
 #endif