diff mbox

Fix mingw32 failures due to incorrect directory separator in pattern

Message ID 542ED60B.2080700@codesourcery.com
State New, archived
Headers

Commit Message

Luis Machado Oct. 3, 2014, 4:59 p.m. UTC 
  Hi,

Some testcases, mostly gdb.reverse ones, assume the presence of a '/' 
directory separator before the source file name. This is incorrect for 
mingw32 hosts, generating false failures for those tests.

I attempted to catch most of the occurrences of the pattern 
".*/$srcfile" and replaced them with ".*$srcfile". The latter is used 
elsewhere in the testsuite. The resulting patch is attached.

I also see other occurrences of the same assumption throughout the 
testsuite, but usually they are arguments for function calls and i seem 
to recall either the test harness or GDB deals with those paths properly.

Is the attached OK?

Luis

Comments

Luis Machado Oct. 14, 2014, 10:41 a.m. UTC | #1 
On 10/03/2014 01:59 PM, Luis Machado wrote:
> Hi,
>
> Some testcases, mostly gdb.reverse ones, assume the presence of a '/'
> directory separator before the source file name. This is incorrect for
> mingw32 hosts, generating false failures for those tests.
>
> I attempted to catch most of the occurrences of the pattern
> ".*/$srcfile" and replaced them with ".*$srcfile". The latter is used
> elsewhere in the testsuite. The resulting patch is attached.
>
> I also see other occurrences of the same assumption throughout the
> testsuite, but usually they are arguments for function calls and i seem
> to recall either the test harness or GDB deals with those paths properly.
>
> Is the attached OK?
>
> Luis

ping?
Yao Qi Oct. 14, 2014, 12:31 p.m. UTC | #2 
Luis Machado <lgustavo@codesourcery.com> writes:

> Some testcases, mostly gdb.reverse ones, assume the presence of a '/'
> directory separator before the source file name. This is incorrect for
> mingw32 hosts, generating false failures for those tests.

These fails are remote host related, not only specific to mingw32.  In
remote host testing, source files can be copied to the place without
directory separator.  These fails this patch fixes can be reproduced on
remote linux host with a modified board file
local-remote-host-native.exp too,

$ make check RUNTESTFLAGS="--host_board=local-remote-host-native --target_board=local-remote-host-native  py-breakpoint.exp"

FAIL: gdb.python/py-breakpoint.exp: test_bkpt_deletion: continue to breakpoint: Break at multiply.
FAIL: gdb.python/py-breakpoint.exp: test_bkpt_deletion: continue to breakpoint: Break at end.
FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: continue to breakpoint: Break at multiply, i==3
FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: continue to breakpoint: Break at multiply, count==1
FAIL: gdb.python/py-breakpoint.exp: test_bkpt_temporary: continue to breakpoint: Break at multiply.

We hack ${board}_download in local-remote-host-native.exp

proc ${board}_download { board src dest } {
    global env

    # Copy file to $HOME and return its base name.
    set destfile [file tail $src]
    file copy -force $src /home/$env(USER)/$destfile

    return $destfile
}
>
> I attempted to catch most of the occurrences of the pattern
> ".*/$srcfile" and replaced them with ".*$srcfile". The latter is used
> elsewhere in the testsuite. The resulting patch is attached.
>
> I also see other occurrences of the same assumption throughout the
> testsuite, but usually they are arguments for function calls and i
> seem to recall either the test harness or GDB deals with those paths
> properly.
>
> Is the attached OK?

It is OK.
Luis Machado Oct. 17, 2014, 2:29 p.m. UTC | #3 
On 10/14/2014 09:31 AM, Yao Qi wrote:
> Luis Machado <lgustavo@codesourcery.com> writes:
>
>> Some testcases, mostly gdb.reverse ones, assume the presence of a '/'
>> directory separator before the source file name. This is incorrect for
>> mingw32 hosts, generating false failures for those tests.
>
> These fails are remote host related, not only specific to mingw32.  In
> remote host testing, source files can be copied to the place without
> directory separator.  These fails this patch fixes can be reproduced on
> remote linux host with a modified board file
> local-remote-host-native.exp too,
>
> $ make check RUNTESTFLAGS="--host_board=local-remote-host-native --target_board=local-remote-host-native  py-breakpoint.exp"
>
> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_deletion: continue to breakpoint: Break at multiply.
> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_deletion: continue to breakpoint: Break at end.
> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: continue to breakpoint: Break at multiply, i==3
> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: continue to breakpoint: Break at multiply, count==1
> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_temporary: continue to breakpoint: Break at multiply.
>
> We hack ${board}_download in local-remote-host-native.exp
>
> proc ${board}_download { board src dest } {
>      global env
>
>      # Copy file to $HOME and return its base name.
>      set destfile [file tail $src]
>      file copy -force $src /home/$env(USER)/$destfile
>
>      return $destfile
> }
>>
>> I attempted to catch most of the occurrences of the pattern
>> ".*/$srcfile" and replaced them with ".*$srcfile". The latter is used
>> elsewhere in the testsuite. The resulting patch is attached.
>>
>> I also see other occurrences of the same assumption throughout the
>> testsuite, but usually they are arguments for function calls and i
>> seem to recall either the test harness or GDB deals with those paths
>> properly.
>>
>> Is the attached OK?
>
> It is OK.
>

Thanks for the feedback Yao. I've pushed this one in now.

Luis
diff mbox

Patch

2014-10-03  Luis Machado  <lgustavo@codesourcery.com>

	gdb/testsuite/
	* gdb.guile/scm-breakpoint.exp: Do not assume any
	directory separators when matching source file paths.
	* gdb.python/py-breakpoint.exp: Likewise.
	* gdb.reverse/break-precsave.exp: Likewise.
	* gdb.reverse/break-reverse.exp: Likewise.
	* gdb.reverse/consecutive-precsave.exp: Likewise.
	* gdb.reverse/finish-precsave.exp: Likewise.
	* gdb.reverse/finish-reverse-bkpt.exp: Likewise.
	* gdb.reverse/finish-reverse.exp: Likewise.
	* gdb.reverse/i386-precsave.exp: Likewise.
	* gdb.reverse/i387-env-reverse.exp: Likewise.
	* gdb.reverse/i387-stack-reverse.exp: Likewise.
	* gdb.reverse/machinestate-precsave.exp: Likewise.
	* gdb.reverse/machinestate.exp: Likewise.
	* gdb.reverse/sigall-precsave.exp: Likewise.
	* gdb.reverse/solib-precsave.exp: Likewise.
	* gdb.reverse/step-precsave.exp: Likewise.
	* gdb.reverse/until-precsave.exp: Likewise.
	* gdb.reverse/watch-precsave.exp: Likewise.
	* gdb.reverse/watch-reverse.exp: Likewise.

diff --git a/gdb/testsuite/gdb.guile/scm-breakpoint.exp b/gdb/testsuite/gdb.guile/scm-breakpoint.exp
index d181710..6a3938e 100644
--- a/gdb/testsuite/gdb.guile/scm-breakpoint.exp
+++ b/gdb/testsuite/gdb.guile/scm-breakpoint.exp
@@ -126,7 +126,7 @@  proc test_bkpt_deletion { } {
 	gdb_test "guile (print (length del-list))" \
 	    "= 3" "number of breakpoints before delete"
 	gdb_continue_to_breakpoint "Break at multiply." \
-	    ".*/$srcfile:$deltst_location.*"
+	    ".*$srcfile:$deltst_location.*"
 	gdb_scm_test_silent_cmd  "guile (delete-breakpoint! dp1)" \
 	    "delete breakpoint"
 	gdb_test "guile (print (breakpoint-number dp1))" \
@@ -136,7 +136,7 @@  proc test_bkpt_deletion { } {
 	    "get breakpoint list 5"
 	gdb_test "guile (print (length del-list))" \
 	    "= 2" "number of breakpoints after delete"
-	gdb_continue_to_breakpoint "Break at end." ".*/$srcfile:$end_location.*"
+	gdb_continue_to_breakpoint "Break at end." ".*$srcfile:$end_location.*"
     }
 }
 
@@ -372,7 +372,7 @@  proc test_bkpt_eval_funcs { } {
 	    "create also-eval-bp1 breakpoint"
 	gdb_scm_test_silent_cmd  "guile (define never-eval-bp1 (make-bp-also-eval \"$end_location\"))" \
 	    "create never-eval-bp1 breakpoint"
-	gdb_continue_to_breakpoint "Break at multiply." ".*/$srcfile:$bp_location2.*"
+	gdb_continue_to_breakpoint "Break at multiply." ".*$srcfile:$bp_location2.*"
 	gdb_test "print i" "3" "check inferior value matches guile accounting"
 	gdb_test "guile (print (bp-eval-inf-i eval-bp1))" \
 	    "= 3" "check guile accounting matches inferior"
@@ -414,7 +414,7 @@  proc test_bkpt_eval_funcs { } {
 	gdb_test "guile (print (bp-eval-count check-eval))" \
 	    "= 0" \
 	    "test that evaluate function has not been yet executed (ie count = 0)"
-	gdb_continue_to_breakpoint "Break at multiply." ".*/$srcfile:$bp_location2.*"
+	gdb_continue_to_breakpoint "Break at multiply." ".*$srcfile:$bp_location2.*"
 	gdb_test "guile (print (bp-eval-count check-eval))" \
 	    "= 1" \
 	    "test that evaluate function is run when location also has normal bp"
diff --git a/gdb/testsuite/gdb.python/py-breakpoint.exp b/gdb/testsuite/gdb.python/py-breakpoint.exp
index 911d586..be0fa34 100644
--- a/gdb/testsuite/gdb.python/py-breakpoint.exp
+++ b/gdb/testsuite/gdb.python/py-breakpoint.exp
@@ -133,7 +133,7 @@  proc test_bkpt_deletion { } {
 	gdb_test "python print (len(del_list))" \
 	    "3" "Number of breakpoints before delete"
 	gdb_continue_to_breakpoint "Break at multiply." \
-	    ".*/$srcfile:$deltst_location.*"
+	    ".*$srcfile:$deltst_location.*"
 	gdb_py_test_silent_cmd  "python dp1.delete()" \
 	    "Delete Breakpoint" 0
 	gdb_test "python print (dp1.number)" \
@@ -144,7 +144,7 @@  proc test_bkpt_deletion { } {
 	gdb_test "python print (len(del_list))" \
 	    "2" "Number of breakpoints after delete"
 	gdb_continue_to_breakpoint "Break at end." \
-	    ".*/$srcfile:$end_location.*"
+	    ".*$srcfile:$end_location.*"
     }
 }
 
@@ -356,7 +356,7 @@  proc test_bkpt_eval_funcs { } {
 	gdb_py_test_silent_cmd "python never_eval_bp1 = bp_also_eval(\"$end_location\")" \
 	    "Set breakpoint" 0
 	gdb_continue_to_breakpoint "Break at multiply, i==3" \
-	    ".*/$srcfile:$bp_location2.*"
+	    ".*$srcfile:$bp_location2.*"
 	gdb_test "print i" \
 	    "3" "Check inferior value matches python accounting"
 	gdb_test "python print (eval_bp1.inf_i)" \
@@ -395,7 +395,7 @@  proc test_bkpt_eval_funcs { } {
 	gdb_test "python print (check_eval.count)" "0" \
 	    "Test that evaluate function has not been yet executed (ie count = 0)"
 	gdb_continue_to_breakpoint "Break at multiply, count==1" \
-	    ".*/$srcfile:$bp_location2.*"
+	    ".*$srcfile:$bp_location2.*"
 	gdb_test "python print (check_eval.count)" "1" \
 	    "Test that evaluate function is run when location also has normal bp"
 
@@ -452,7 +452,7 @@  proc test_bkpt_temporary { } {
 	gdb_test "python print (ibp.temporary)" "True" \
 	    "Check breakpoint temporary status"
 	gdb_continue_to_breakpoint "Break at multiply." \
-	    ".*/$srcfile:$ibp_location.*"
+	    ".*$srcfile:$ibp_location.*"
 	gdb_test "python print (ibp.count)" "1" \
 	    "Check temporary stop callback executed before deletion."
 	gdb_test "python print (ibp.temporary)" "RuntimeError: Breakpoint 2 is invalid.*" \
diff --git a/gdb/testsuite/gdb.reverse/break-precsave.exp b/gdb/testsuite/gdb.reverse/break-precsave.exp
index 3206e3c..f77054c 100644
--- a/gdb/testsuite/gdb.reverse/break-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/break-precsave.exp
@@ -45,7 +45,7 @@  proc precsave_tests {} {
     }
 
     gdb_test "break $end_location" \
-	"Breakpoint $decimal at .*/$srcfile, line $end_location\." \
+	"Breakpoint $decimal at .*$srcfile, line $end_location\." \
 	"BP at end of main"
 
     gdb_test "continue" "Breakpoint .* end of main .*" "run to end of main"
@@ -69,10 +69,10 @@  proc precsave_tests {} {
 	"Breakpoint $decimal at .* line $bar_location\." \
 	"set breakpoint on bar"
 
-    gdb_continue_to_breakpoint "foo" ".*/$srcfile:$foo_location.*"
-    gdb_continue_to_breakpoint "bar" ".*/$srcfile:$bar_location.*"
+    gdb_continue_to_breakpoint "foo" ".*$srcfile:$foo_location.*"
+    gdb_continue_to_breakpoint "bar" ".*$srcfile:$bar_location.*"
     gdb_test_multiple "continue" "go to end of main forward" {
-	-re ".*Breakpoint $decimal,.*/$srcfile:$end_location.*$gdb_prompt $"  {
+	-re ".*Breakpoint $decimal,.*$srcfile:$end_location.*$gdb_prompt $"  {
 	    pass "go to end of main forward"
 	}
 	-re "No more reverse-execution history.* end of main .*$gdb_prompt $" {
@@ -82,11 +82,11 @@  proc precsave_tests {} {
 
     gdb_test_no_output "set exec-direction reverse" "set reverse"
 
-    gdb_continue_to_breakpoint "bar backward"  ".*/$srcfile:$bar_location.*"
-    gdb_continue_to_breakpoint "foo backward"  ".*/$srcfile:$foo_location.*"
+    gdb_continue_to_breakpoint "bar backward"  ".*$srcfile:$bar_location.*"
+    gdb_continue_to_breakpoint "foo backward"  ".*$srcfile:$foo_location.*"
 
     gdb_test_multiple "continue" "main backward" {
-	-re ".*Breakpoint $decimal,.*/$srcfile:$main_location.*$gdb_prompt $" {
+	-re ".*Breakpoint $decimal,.*$srcfile:$main_location.*$gdb_prompt $" {
 	    pass "main backward"
 	}
 	-re "No more reverse-execution history.* break in main .*$gdb_prompt $" {
@@ -96,11 +96,11 @@  proc precsave_tests {} {
 
     gdb_test_no_output "set exec-direction forward" "set forward"
 
-    gdb_continue_to_breakpoint "foo" ".*/$srcfile:$foo_location.*"
-    gdb_continue_to_breakpoint "bar" ".*/$srcfile:$bar_location.*"
+    gdb_continue_to_breakpoint "foo" ".*$srcfile:$foo_location.*"
+    gdb_continue_to_breakpoint "bar" ".*$srcfile:$bar_location.*"
 
     gdb_test_multiple "continue" "end of record log" {
-	-re ".*Breakpoint $decimal,.*/$srcfile:$end_location.*$gdb_prompt $" {
+	-re ".*Breakpoint $decimal,.*$srcfile:$end_location.*$gdb_prompt $" {
 	    pass "end of record log"
 	}
 	-re "No more reverse-execution history.* end of main .*$gdb_prompt $" {
diff --git a/gdb/testsuite/gdb.reverse/break-reverse.exp b/gdb/testsuite/gdb.reverse/break-reverse.exp
index 9cdc478..53b6fd0 100644
--- a/gdb/testsuite/gdb.reverse/break-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/break-reverse.exp
@@ -50,17 +50,17 @@  gdb_test "break $end_location" \
     "Breakpoint $decimal at .* line $end_location\." \
     set breakpoint at end of main"
 
-gdb_continue_to_breakpoint "foo" ".*/$srcfile:$foo_location.*"
-gdb_continue_to_breakpoint "bar" ".*/$srcfile:$bar_location.*"
-gdb_continue_to_breakpoint "end" ".*/$srcfile:$end_location.*"
+gdb_continue_to_breakpoint "foo" ".*$srcfile:$foo_location.*"
+gdb_continue_to_breakpoint "bar" ".*$srcfile:$bar_location.*"
+gdb_continue_to_breakpoint "end" ".*$srcfile:$end_location.*"
 
 gdb_test_no_output "set exec-direction reverse" "set reverse"
 
-gdb_continue_to_breakpoint "bar backward"  ".*/$srcfile:$bar_location.*"
-gdb_continue_to_breakpoint "foo backward"  ".*/$srcfile:$foo_location.*"
+gdb_continue_to_breakpoint "bar backward"  ".*$srcfile:$bar_location.*"
+gdb_continue_to_breakpoint "foo backward"  ".*$srcfile:$foo_location.*"
 
 gdb_test_multiple "continue" "main backward" {
-    -re ".*Breakpoint $decimal,.*/$srcfile:$main_location.*$gdb_prompt $" {
+    -re ".*Breakpoint $decimal,.*$srcfile:$main_location.*$gdb_prompt $" {
 	pass "main backward"
     }
     -re "No more reverse-execution history.* break in main .*$gdb_prompt $" {
@@ -70,11 +70,11 @@  gdb_test_multiple "continue" "main backward" {
 
 gdb_test_no_output "set exec-direction forward" "set forward"
 
-gdb_continue_to_breakpoint "foo" ".*/$srcfile:$foo_location.*"
-gdb_continue_to_breakpoint "bar" ".*/$srcfile:$bar_location.*"
+gdb_continue_to_breakpoint "foo" ".*$srcfile:$foo_location.*"
+gdb_continue_to_breakpoint "bar" ".*$srcfile:$bar_location.*"
 
 gdb_test_multiple "continue" "end of record log" {
-    -re ".*Breakpoint $decimal,.*/$srcfile:$end_location.*$gdb_prompt $" {
+    -re ".*Breakpoint $decimal,.*$srcfile:$end_location.*$gdb_prompt $" {
 	pass "end of record log"
     }
     -re "No more reverse-execution history.* end of main .*$gdb_prompt $" {
diff --git a/gdb/testsuite/gdb.reverse/consecutive-precsave.exp b/gdb/testsuite/gdb.reverse/consecutive-precsave.exp
index 45ad153..43e9d77 100644
--- a/gdb/testsuite/gdb.reverse/consecutive-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/consecutive-precsave.exp
@@ -37,7 +37,7 @@  if [supports_process_record] {
 
 set end_location  [gdb_get_line_number "end of main"  ]
 gdb_test "break $end_location" \
-    "Breakpoint $decimal at .*/$srcfile, line $end_location\." \
+    "Breakpoint $decimal at .*$srcfile, line $end_location\." \
     "BP at end of main"
 
 gdb_test "continue" "Breakpoint .* end of main .*" "run to end of main"
diff --git a/gdb/testsuite/gdb.reverse/finish-precsave.exp b/gdb/testsuite/gdb.reverse/finish-precsave.exp
index 48fa7df..22c32e4 100644
--- a/gdb/testsuite/gdb.reverse/finish-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/finish-precsave.exp
@@ -38,7 +38,7 @@  if [supports_process_record] {
 
 set breakloc [gdb_get_line_number "end of main" "$srcfile"]
 gdb_test "break $breakloc" \
-    "Breakpoint $decimal at .*/$srcfile, line $breakloc\." \
+    "Breakpoint $decimal at .*$srcfile, line $breakloc\." \
     "BP at end of main"
 
 gdb_test "continue" "Breakpoint .* end of main .*" "run to end of main"
@@ -58,9 +58,9 @@  gdb_test "record restore $precsave" \
 
 set breakloc [gdb_get_line_number "VOID FUNC" "$srcfile"]
 gdb_test "break void_func" \
-    "Breakpoint $decimal at .*/$srcfile, line $breakloc\." \
+    "Breakpoint $decimal at .*$srcfile, line $breakloc\." \
     "set breakpoint on void_func"
-gdb_continue_to_breakpoint "void_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "void_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "finish from void_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -77,9 +77,9 @@  gdb_test_multiple "finish" "$test_msg" {
 
 set breakloc [gdb_get_line_number "CHAR FUNC" "$srcfile"]
 gdb_test "break char_func" \
-    "Breakpoint $decimal at .*/$srcfile, line $breakloc\." \
+    "Breakpoint $decimal at .*$srcfile, line $breakloc\." \
     "set breakpoint on char_func"
-gdb_continue_to_breakpoint "char_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "char_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "finish from char_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -98,7 +98,7 @@  set breakloc [gdb_get_line_number "SHORT FUNC" "$srcfile"]
 gdb_test "break short_func" \
     "Breakpoint $decimal at .* line $breakloc\." \
     "set breakpoint on short_func"
-gdb_continue_to_breakpoint "short_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "short_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "finish from short_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -117,7 +117,7 @@  set breakloc [gdb_get_line_number "INT FUNC" "$srcfile"]
 gdb_test "break int_func" \
     "Breakpoint $decimal at .* line $breakloc\." \
     "set breakpoint on int_func"
-gdb_continue_to_breakpoint "int_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "int_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "finish from int_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -136,7 +136,7 @@  set breakloc [gdb_get_line_number "LONG FUNC" "$srcfile"]
 gdb_test "break long_func" \
     "Breakpoint $decimal at .* line $breakloc\." \
     "set breakpoint on long_func"
-gdb_continue_to_breakpoint "long_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "long_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "finish from long_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -155,7 +155,7 @@  set breakloc [gdb_get_line_number "LONG LONG FUNC" "$srcfile"]
 gdb_test "break long_long_func" \
     "Breakpoint $decimal at .* line $breakloc\." \
     "set breakpoint on long_long_func"
-gdb_continue_to_breakpoint "long_long_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "long_long_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "finish from long_long_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -179,7 +179,7 @@  gdb_test_no_output "set exec-dir reverse" "set reverse execution"
 # Test reverse finish from long long func
 
 set breakloc [gdb_get_line_number "LONG LONG FUNC" "$srcfile"]
-gdb_continue_to_breakpoint "long_long_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "long_long_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "reverse finish from long_long_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -191,7 +191,7 @@  gdb_test_multiple "finish" "$test_msg" {
 # Test reverse finish from long func
 
 set breakloc [gdb_get_line_number "LONG FUNC" "$srcfile"]
-gdb_continue_to_breakpoint "long_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "long_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "reverse finish from long_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -203,7 +203,7 @@  gdb_test_multiple "finish" "$test_msg" {
 # Test reverse finish from int func
 
 set breakloc [gdb_get_line_number "INT FUNC" "$srcfile"]
-gdb_continue_to_breakpoint "int_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "int_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "reverse finish from int_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -215,7 +215,7 @@  gdb_test_multiple "finish" "$test_msg" {
 # Test reverse finish from short func
 
 set breakloc [gdb_get_line_number "SHORT FUNC" "$srcfile"]
-gdb_continue_to_breakpoint "short_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "short_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "reverse finish from short_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -227,7 +227,7 @@  gdb_test_multiple "finish" "$test_msg" {
 # Test reverse finish from char func
 
 set breakloc [gdb_get_line_number "CHAR FUNC" "$srcfile"]
-gdb_continue_to_breakpoint "char_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "char_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "reverse finish from char_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -239,7 +239,7 @@  gdb_test_multiple "finish" "$test_msg" {
 # Test reverse finish from void func
 
 set breakloc [gdb_get_line_number "VOID FUNC" "$srcfile"]
-gdb_continue_to_breakpoint "void_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "void_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "reverse finish from void_func"
 gdb_test_multiple "finish" "$test_msg" {
diff --git a/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp b/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
index 92ad65e..11e8b5d 100644
--- a/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
+++ b/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
@@ -41,9 +41,9 @@  if [supports_process_record] {
 
 set breakloc [gdb_get_line_number "VOID FUNC" "$srcfile"]
 gdb_test "break void_func" \
-    "Breakpoint $decimal at .*/$srcfile, line $breakloc\." \
+    "Breakpoint $decimal at .*$srcfile, line $breakloc\." \
     "set breakpoint on void_func"
-gdb_continue_to_breakpoint "void_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "void_func" ".*$srcfile:$breakloc.*"
 
 gdb_test "break \*void_func" \
     "Breakpoint $decimal at .*" \
diff --git a/gdb/testsuite/gdb.reverse/finish-reverse.exp b/gdb/testsuite/gdb.reverse/finish-reverse.exp
index 30b6988..077d4ed 100644
--- a/gdb/testsuite/gdb.reverse/finish-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/finish-reverse.exp
@@ -37,9 +37,9 @@  if [supports_process_record] {
 
 set breakloc [gdb_get_line_number "VOID FUNC" "$srcfile"]
 gdb_test "break void_func" \
-    "Breakpoint $decimal at .*/$srcfile, line $breakloc\." \
+    "Breakpoint $decimal at .*$srcfile, line $breakloc\." \
     "set breakpoint on void_func"
-gdb_continue_to_breakpoint "void_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "void_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "finish from void_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -56,9 +56,9 @@  gdb_test_multiple "finish" "$test_msg" {
 
 set breakloc [gdb_get_line_number "CHAR FUNC" "$srcfile"]
 gdb_test "break char_func" \
-    "Breakpoint $decimal at .*/$srcfile, line $breakloc\." \
+    "Breakpoint $decimal at .*$srcfile, line $breakloc\." \
     "set breakpoint on char_func"
-gdb_continue_to_breakpoint "char_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "char_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "finish from char_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -77,7 +77,7 @@  set breakloc [gdb_get_line_number "SHORT FUNC" "$srcfile"]
 gdb_test "break short_func" \
     "Breakpoint $decimal at .* line $breakloc\." \
     "set breakpoint on short_func"
-gdb_continue_to_breakpoint "short_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "short_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "finish from short_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -96,7 +96,7 @@  set breakloc [gdb_get_line_number "INT FUNC" "$srcfile"]
 gdb_test "break int_func" \
     "Breakpoint $decimal at .* line $breakloc\." \
     "set breakpoint on int_func"
-gdb_continue_to_breakpoint "int_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "int_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "finish from int_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -115,7 +115,7 @@  set breakloc [gdb_get_line_number "LONG FUNC" "$srcfile"]
 gdb_test "break long_func" \
     "Breakpoint $decimal at .* line $breakloc\." \
     "set breakpoint on long_func"
-gdb_continue_to_breakpoint "long_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "long_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "finish from long_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -134,7 +134,7 @@  set breakloc [gdb_get_line_number "LONG LONG FUNC" "$srcfile"]
 gdb_test "break long_long_func" \
     "Breakpoint $decimal at .* line $breakloc\." \
     "set breakpoint on long_long_func"
-gdb_continue_to_breakpoint "long_long_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "long_long_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "finish from long_long_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -158,7 +158,7 @@  gdb_test_no_output "set exec-dir reverse" "set reverse execution"
 # Test reverse finish from long long func
 
 set breakloc [gdb_get_line_number "LONG LONG FUNC" "$srcfile"]
-gdb_continue_to_breakpoint "long_long_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "long_long_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "reverse finish from long_long_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -170,7 +170,7 @@  gdb_test_multiple "finish" "$test_msg" {
 # Test reverse finish from long func
 
 set breakloc [gdb_get_line_number "LONG FUNC" "$srcfile"]
-gdb_continue_to_breakpoint "long_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "long_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "reverse finish from long_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -182,7 +182,7 @@  gdb_test_multiple "finish" "$test_msg" {
 # Test reverse finish from int func
 
 set breakloc [gdb_get_line_number "INT FUNC" "$srcfile"]
-gdb_continue_to_breakpoint "int_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "int_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "reverse finish from int_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -194,7 +194,7 @@  gdb_test_multiple "finish" "$test_msg" {
 # Test reverse finish from short func
 
 set breakloc [gdb_get_line_number "SHORT FUNC" "$srcfile"]
-gdb_continue_to_breakpoint "short_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "short_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "reverse finish from short_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -206,7 +206,7 @@  gdb_test_multiple "finish" "$test_msg" {
 # Test reverse finish from char func
 
 set breakloc [gdb_get_line_number "CHAR FUNC" "$srcfile"]
-gdb_continue_to_breakpoint "char_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "char_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "reverse finish from char_func"
 gdb_test_multiple "finish" "$test_msg" {
@@ -218,7 +218,7 @@  gdb_test_multiple "finish" "$test_msg" {
 # Test reverse finish from void func
 
 set breakloc [gdb_get_line_number "VOID FUNC" "$srcfile"]
-gdb_continue_to_breakpoint "void_func" ".*/$srcfile:$breakloc.*"
+gdb_continue_to_breakpoint "void_func" ".*$srcfile:$breakloc.*"
 
 set test_msg "reverse finish from void_func"
 gdb_test_multiple "finish" "$test_msg" {
diff --git a/gdb/testsuite/gdb.reverse/i386-precsave.exp b/gdb/testsuite/gdb.reverse/i386-precsave.exp
index 16570e8..8b713fd 100644
--- a/gdb/testsuite/gdb.reverse/i386-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/i386-precsave.exp
@@ -55,7 +55,7 @@  global hex
 global decimal
 
 gdb_test "break $end_of_main" \
-    "Breakpoint $decimal at .*/$srcfile, line $end_of_main\." \
+    "Breakpoint $decimal at .*$srcfile, line $end_of_main\." \
     "BP at end of main"
 
 gdb_test "continue" "Breakpoint .* end of main .*" "run to end of main"
diff --git a/gdb/testsuite/gdb.reverse/i387-env-reverse.exp b/gdb/testsuite/gdb.reverse/i387-env-reverse.exp
index 5bca27a..f5b503e 100644
--- a/gdb/testsuite/gdb.reverse/i387-env-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/i387-env-reverse.exp
@@ -40,7 +40,7 @@  gdb_test_no_output "record"  "Turn on process record"
 # This can take awhile.
 set oldtimeout $timeout
 set timeout [expr $oldtimeout + 120]
-gdb_test "until $location" ".*/$srcfile:$location.*" \
+gdb_test "until $location" ".*$srcfile:$location.*" \
     "record to end of main"
 set timeout $oldtimeout
 
@@ -48,14 +48,14 @@  set timeout $oldtimeout
 
 set location [gdb_get_line_number "BEGIN I387-FLOAT-REVERSE"]
 gdb_test_no_output "set exec-dir reverse" "set reverse direction"
-gdb_test "until $location" ".*/$srcfile:$location.*" \
+gdb_test "until $location" ".*$srcfile:$location.*" \
     "rewind to beginning of main"
 gdb_test_no_output "set exec-dir forward" "set forward direction"
 
 # Test FPU env particularly ftag and fstatus reigters.
 
 set location [gdb_get_line_number "TEST ENV"]
-gdb_test "until $location" ".*/$srcfile:$location.*asm.*nop.*" \
+gdb_test "until $location" ".*$srcfile:$location.*asm.*nop.*" \
     "begin testing fpu env"       
 
 gdb_test "n" "asm.*fsave.*"               "save FPU env in memory"    
diff --git a/gdb/testsuite/gdb.reverse/i387-stack-reverse.exp b/gdb/testsuite/gdb.reverse/i387-stack-reverse.exp
index 2c25828..ce8297f 100644
--- a/gdb/testsuite/gdb.reverse/i387-stack-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/i387-stack-reverse.exp
@@ -37,14 +37,14 @@  runto main
 
 set location [gdb_get_line_number "END I387-FLOAT-REVERSE"]
 gdb_test_no_output "record" "Turn on process record"
-gdb_test "until $location" ".*/$srcfile:$location.*" \
+gdb_test "until $location" ".*$srcfile:$location.*" \
     "record to end of main"
 
 # Now rewind to beginning so we can begin testing.
 
 set location [gdb_get_line_number "BEGIN I387-FLOAT-REVERSE"]
 gdb_test_no_output "set exec-dir reverse" "set reverse direction"
-gdb_test "until $location" ".*/$srcfile:$location.*" \
+gdb_test "until $location" ".*$srcfile:$location.*" \
     "rewind to beginning of main"
 gdb_test_no_output "set exec-dir forward" "set forward direction"
 
@@ -53,7 +53,7 @@  gdb_test_no_output "set exec-dir forward" "set forward direction"
 # and see whether all are getting recorded.
 
 set location [gdb_get_line_number "test st0 register"]
-gdb_test "until $location" ".*/$srcfile:$location.*asm.*fld1.*" \
+gdb_test "until $location" ".*$srcfile:$location.*asm.*fld1.*" \
     "begin test st0"
 gdb_test "stepi" "asm.*fldl2t.*"              "push st0 == 1"
 gdb_test "info register st0" "st0 *1\t.*"     "verify st0 == 1"
diff --git a/gdb/testsuite/gdb.reverse/machinestate-precsave.exp b/gdb/testsuite/gdb.reverse/machinestate-precsave.exp
index e315cd9..3b62dc9 100644
--- a/gdb/testsuite/gdb.reverse/machinestate-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/machinestate-precsave.exp
@@ -63,7 +63,7 @@  if [supports_process_record] {
 }
 
 gdb_test "break $endmain" \
-    "Breakpoint $decimal at .*/$srcfile, line $endmain\." \
+    "Breakpoint $decimal at .*$srcfile, line $endmain\." \
     "BP at end of main"
 
 gdb_test "continue" "Breakpoint .* end main .*" "run to end of main"
@@ -82,10 +82,10 @@  gdb_test "record restore $precsave" \
 # Proceed to end of main
 
 gdb_test "break $endmain" \
-    "Breakpoint.* file .*/$srcfile, line $endmain.*" ""
+    "Breakpoint.* file .*$srcfile, line $endmain.*" ""
 
 gdb_test_multiple "continue" "go to end of main forward" {
-    -re ".*Breakpoint $decimal,.*/$srcfile:$endmain.*$gdb_prompt $"  {
+    -re ".*Breakpoint $decimal,.*$srcfile:$endmain.*$gdb_prompt $"  {
 	pass "go to end of main forward"
     }
     -re "No more reverse-execution history.* end main .*$gdb_prompt $" {
@@ -105,8 +105,8 @@  gdb_test_multiple "continue" "go to end of main forward" {
 set breakloc [gdb_get_line_number \
 		  "module_global_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "reverse-continue" ".*/$srcfile:$breakloc.*" "reverse to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "reverse-continue" ".*$srcfile:$breakloc.*" "reverse to $breakloc"
 
 gdb_test "print aglobal" ".* = 0$newline"  "module global reverse-breakpoint"
 gdb_test "step"          ".* module global post-change .*" ""
@@ -120,8 +120,8 @@  gdb_test "print aglobal" ".* = 0$newline"  "module global reverse-step to bp"
 set breakloc [gdb_get_line_number \
 		  "module_static_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "reverse-continue" ".*/$srcfile:$breakloc.*" "reverse to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "reverse-continue" ".*$srcfile:$breakloc.*" "reverse to $breakloc"
 
 gdb_test "print astatic" ".* = 0$newline"  "module static reverse-breakpoint"
 gdb_test "step"          ".* module static post-change .*" ""
@@ -134,8 +134,8 @@  gdb_test "print astatic" ".* = 0$newline"  "module static reverse-step"
 set breakloc [gdb_get_line_number \
 		  "function_static_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "reverse-continue" ".*/$srcfile:$breakloc.*" "reverse to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "reverse-continue" ".*$srcfile:$breakloc.*" "reverse to $breakloc"
 
 gdb_test "print a"      ".* = 0$newline"  "function static reverse-breakpoint"
 gdb_test "step"         ".* function static post-change .*" ""
@@ -148,8 +148,8 @@  gdb_test "print a"      ".* = 0$newline"  "function static reverse-step"
 set breakloc [gdb_get_line_number \
 		  "auto_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "reverse-continue" ".*/$srcfile:$breakloc.*" "reverse to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "reverse-continue" ".*$srcfile:$breakloc.*" "reverse to $breakloc"
 
 gdb_test "print a"      ".* = 0$newline"  "auto var reverse-breakpoint"
 gdb_test "step"         ".* auto post-change .*" ""
@@ -162,8 +162,8 @@  gdb_test "print a"      ".* = 0$newline"  "auto var reverse-step"
 set breakloc [gdb_get_line_number \
 		  "register_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "reverse-continue" ".*/$srcfile:$breakloc.*" "reverse to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "reverse-continue" ".*$srcfile:$breakloc.*" "reverse to $breakloc"
 
 gdb_test "print a"      ".* = 0$newline"  "register var reverse-breakpoint"
 gdb_test "step"         ".* register post-change .*" ""
@@ -173,8 +173,8 @@  gdb_test "print a"      ".* = 0$newline"  "register var reverse step-to"
 
 # Proceed to beginning of main
 
-gdb_test "tbreak $beginmain" ".*/$srcfile, line $beginmain.*" ""
-gdb_test "reverse-continue"  ".*/$srcfile:$beginmain.*" "reverse to main"
+gdb_test "tbreak $beginmain" ".*$srcfile, line $beginmain.*" ""
+gdb_test "reverse-continue"  ".*$srcfile:$beginmain.*" "reverse to main"
 
 # Now repeat tests while replaying forward.
 
@@ -183,8 +183,8 @@  gdb_test "reverse-continue"  ".*/$srcfile:$beginmain.*" "reverse to main"
 set breakloc [gdb_get_line_number \
 		  "register_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "continue"         ".*/$srcfile:$breakloc.*" "forward to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "continue"         ".*$srcfile:$breakloc.*" "forward to $breakloc"
 
 gdb_test "print a"      ".* = 0$newline"  "register var forward-breakpoint"
 gdb_test "reverse-step" ".*hide.*" ""
@@ -198,8 +198,8 @@  gdb_test "print a"      ".* = 1$newline"  "register var step post-change"
 set breakloc [gdb_get_line_number \
 		  "auto_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "continue"         ".*/$srcfile:$breakloc.*" "forward to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "continue"         ".*$srcfile:$breakloc.*" "forward to $breakloc"
 
 gdb_test "print a"      ".* = 0$newline"  "auto var forward-breakpoint"
 gdb_test "reverse-step" ".*hide.*" ""
@@ -213,8 +213,8 @@  gdb_test "print a"      ".* = 1$newline"  "auto var step post-change"
 set breakloc [gdb_get_line_number \
 		  "function_static_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "continue"         ".*/$srcfile:$breakloc.*" "forward to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "continue"         ".*$srcfile:$breakloc.*" "forward to $breakloc"
 
 gdb_test "print a"      ".* = 0$newline"  "function static forward-breakpoint"
 gdb_test "reverse-step" ".*hide.*" ""
@@ -228,8 +228,8 @@  gdb_test "print a"      ".* = 1$newline"  "function static step post-change"
 set breakloc [gdb_get_line_number \
 		  "module_static_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "continue"         ".*/$srcfile:$breakloc.*" "forward to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "continue"         ".*$srcfile:$breakloc.*" "forward to $breakloc"
 
 gdb_test "print astatic" ".* = 0$newline"  "module static forward-breakpoint"
 gdb_test "reverse-step"  ".*hide.*" ""
@@ -243,8 +243,8 @@  gdb_test "print astatic" ".* = 1$newline"  "module static step post-change"
 set breakloc [gdb_get_line_number \
 		  "module_global_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "continue"         ".*/$srcfile:$breakloc.*" "forward to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "continue"         ".*$srcfile:$breakloc.*" "forward to $breakloc"
 
 gdb_test "print aglobal" ".* = 0$newline"  "module global forward-breakpoint"
 gdb_test "reverse-step"  ".*hide.*" ""
diff --git a/gdb/testsuite/gdb.reverse/machinestate.exp b/gdb/testsuite/gdb.reverse/machinestate.exp
index d2d2137..714571b 100644
--- a/gdb/testsuite/gdb.reverse/machinestate.exp
+++ b/gdb/testsuite/gdb.reverse/machinestate.exp
@@ -63,8 +63,8 @@  if [supports_process_record] {
 # Proceed to end of main
 
 gdb_test "break $endmain" \
-    "Breakpoint.* file .*/$srcfile, line $endmain.*" ""
-gdb_continue_to_breakpoint "end of main" ".*/$srcfile:$endmain.*"
+    "Breakpoint.* file .*$srcfile, line $endmain.*" ""
+gdb_continue_to_breakpoint "end of main" ".*$srcfile:$endmain.*"
 
 ###
 ###
@@ -78,8 +78,8 @@  gdb_continue_to_breakpoint "end of main" ".*/$srcfile:$endmain.*"
 set breakloc [gdb_get_line_number \
 		  "module_global_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "reverse-continue" ".*/$srcfile:$breakloc.*" "reverse to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "reverse-continue" ".*$srcfile:$breakloc.*" "reverse to $breakloc"
 
 gdb_test "print aglobal" ".* = 0$newline"  "module global reverse-breakpoint"
 gdb_test "step"          ".* module global post-change .*" ""
@@ -93,8 +93,8 @@  gdb_test "print aglobal" ".* = 0$newline"  "module global reverse-step to bp"
 set breakloc [gdb_get_line_number \
 		  "module_static_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "reverse-continue" ".*/$srcfile:$breakloc.*" "reverse to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "reverse-continue" ".*$srcfile:$breakloc.*" "reverse to $breakloc"
 
 gdb_test "print astatic" ".* = 0$newline"  "module static reverse-breakpoint"
 gdb_test "step"          ".* module static post-change .*" ""
@@ -107,8 +107,8 @@  gdb_test "print astatic" ".* = 0$newline"  "module static reverse-step"
 set breakloc [gdb_get_line_number \
 		  "function_static_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "reverse-continue" ".*/$srcfile:$breakloc.*" "reverse to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "reverse-continue" ".*$srcfile:$breakloc.*" "reverse to $breakloc"
 
 gdb_test "print a"      ".* = 0$newline"  "function static reverse-breakpoint"
 gdb_test "step"         ".* function static post-change .*" ""
@@ -121,8 +121,8 @@  gdb_test "print a"      ".* = 0$newline"  "function static reverse-step"
 set breakloc [gdb_get_line_number \
 		  "auto_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "reverse-continue" ".*/$srcfile:$breakloc.*" "reverse to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "reverse-continue" ".*$srcfile:$breakloc.*" "reverse to $breakloc"
 
 gdb_test "print a"      ".* = 0$newline"  "auto var reverse-breakpoint"
 gdb_test "step"         ".* auto post-change .*" ""
@@ -135,8 +135,8 @@  gdb_test "print a"      ".* = 0$newline"  "auto var reverse-step"
 set breakloc [gdb_get_line_number \
 		  "register_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "reverse-continue" ".*/$srcfile:$breakloc.*" "reverse to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "reverse-continue" ".*$srcfile:$breakloc.*" "reverse to $breakloc"
 
 gdb_test "print a"      ".* = 0$newline"  "register var reverse-breakpoint"
 gdb_test "step"         ".* register post-change .*" ""
@@ -146,8 +146,8 @@  gdb_test "print a"      ".* = 0$newline"  "register var reverse step-to"
 
 # Proceed to beginning of main
 
-gdb_test "tbreak $beginmain" ".*/$srcfile, line $beginmain.*" ""
-gdb_test "reverse-continue"  ".*/$srcfile:$beginmain.*" "reverse to main"
+gdb_test "tbreak $beginmain" ".*$srcfile, line $beginmain.*" ""
+gdb_test "reverse-continue"  ".*$srcfile:$beginmain.*" "reverse to main"
 
 # Now repeat tests while replaying forward.
 
@@ -156,8 +156,8 @@  gdb_test "reverse-continue"  ".*/$srcfile:$beginmain.*" "reverse to main"
 set breakloc [gdb_get_line_number \
 		  "register_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "continue"         ".*/$srcfile:$breakloc.*" "forward to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "continue"         ".*$srcfile:$breakloc.*" "forward to $breakloc"
 
 gdb_test "print a"      ".* = 0$newline"  "register var forward-breakpoint"
 gdb_test "reverse-step" ".*hide.*" ""
@@ -171,8 +171,8 @@  gdb_test "print a"      ".* = 1$newline"  "register var step post-change"
 set breakloc [gdb_get_line_number \
 		  "auto_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "continue"         ".*/$srcfile:$breakloc.*" "forward to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "continue"         ".*$srcfile:$breakloc.*" "forward to $breakloc"
 
 gdb_test "print a"      ".* = 0$newline"  "auto var forward-breakpoint"
 gdb_test "reverse-step" ".*hide.*" ""
@@ -186,8 +186,8 @@  gdb_test "print a"      ".* = 1$newline"  "auto var step post-change"
 set breakloc [gdb_get_line_number \
 		  "function_static_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "continue"         ".*/$srcfile:$breakloc.*" "forward to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "continue"         ".*$srcfile:$breakloc.*" "forward to $breakloc"
 
 gdb_test "print a"      ".* = 0$newline"  "function static forward-breakpoint"
 gdb_test "reverse-step" ".*hide.*" ""
@@ -201,8 +201,8 @@  gdb_test "print a"      ".* = 1$newline"  "function static step post-change"
 set breakloc [gdb_get_line_number \
 		  "module_static_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "continue"         ".*/$srcfile:$breakloc.*" "forward to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "continue"         ".*$srcfile:$breakloc.*" "forward to $breakloc"
 
 gdb_test "print astatic" ".* = 0$newline"  "module static forward-breakpoint"
 gdb_test "reverse-step"  ".*hide.*" ""
@@ -216,8 +216,8 @@  gdb_test "print astatic" ".* = 1$newline"  "module static step post-change"
 set breakloc [gdb_get_line_number \
 		  "module_global_state: set breakpoint here" $srcfile]
 
-gdb_test "tbreak $breakloc" ".*/$srcfile, line $breakloc.*" ""
-gdb_test "continue"         ".*/$srcfile:$breakloc.*" "forward to $breakloc"
+gdb_test "tbreak $breakloc" ".*$srcfile, line $breakloc.*" ""
+gdb_test "continue"         ".*$srcfile:$breakloc.*" "forward to $breakloc"
 
 gdb_test "print aglobal" ".* = 0$newline"  "module global forward-breakpoint"
 gdb_test "reverse-step"  ".*hide.*" ""
diff --git a/gdb/testsuite/gdb.reverse/sigall-precsave.exp b/gdb/testsuite/gdb.reverse/sigall-precsave.exp
index 4a4695e..3c2b81c 100644
--- a/gdb/testsuite/gdb.reverse/sigall-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/sigall-precsave.exp
@@ -172,7 +172,7 @@  if [supports_process_record] {
 
 set breakloc [gdb_get_line_number "end of main" "$srcfile"]
 gdb_test "break $breakloc" \
-    "Breakpoint $decimal at .*/$srcfile, line $breakloc\." \
+    "Breakpoint $decimal at .*$srcfile, line $breakloc\." \
     "BP at end of main"
 
 # Signal handlers must be disabled
diff --git a/gdb/testsuite/gdb.reverse/solib-precsave.exp b/gdb/testsuite/gdb.reverse/solib-precsave.exp
index 927722b..f8f78a5 100644
--- a/gdb/testsuite/gdb.reverse/solib-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/solib-precsave.exp
@@ -88,7 +88,7 @@  if [supports_process_record] {
 
 set end_of_main [gdb_get_line_number "end of main" ]
 gdb_test "break $end_of_main" \
-    "Breakpoint $decimal at .*/$srcfile, line $end_of_main\." \
+    "Breakpoint $decimal at .*$srcfile, line $end_of_main\." \
     "BP at end of main"
 
 gdb_test "continue" "Breakpoint .* end of main .*" "run to end of main"
diff --git a/gdb/testsuite/gdb.reverse/step-precsave.exp b/gdb/testsuite/gdb.reverse/step-precsave.exp
index d69cf5c..6f52e58 100644
--- a/gdb/testsuite/gdb.reverse/step-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/step-precsave.exp
@@ -41,7 +41,7 @@  if [supports_process_record] {
 
 set end_of_main [gdb_get_line_number "end of main" ]
 gdb_test "break $end_of_main" \
-    "Breakpoint $decimal at .*/$srcfile, line $end_of_main\." \
+    "Breakpoint $decimal at .*$srcfile, line $end_of_main\." \
     "BP at end of main"
 
 gdb_test "continue" "Breakpoint .* end of main .*" "run to end of main"
diff --git a/gdb/testsuite/gdb.reverse/until-precsave.exp b/gdb/testsuite/gdb.reverse/until-precsave.exp
index 23e557e..db643fa 100644
--- a/gdb/testsuite/gdb.reverse/until-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/until-precsave.exp
@@ -45,7 +45,7 @@  if [supports_process_record] {
 
 set end_of_main [gdb_get_line_number "set breakpoint 10a here" ]
 gdb_test "break $end_of_main" \
-    "Breakpoint $decimal at .*/$srcfile, line $end_of_main\." \
+    "Breakpoint $decimal at .*$srcfile, line $end_of_main\." \
     "BP at end of main"
 
 # This can take awhile.
diff --git a/gdb/testsuite/gdb.reverse/watch-precsave.exp b/gdb/testsuite/gdb.reverse/watch-precsave.exp
index 096cefc..5fe1296 100644
--- a/gdb/testsuite/gdb.reverse/watch-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/watch-precsave.exp
@@ -38,7 +38,7 @@  if [supports_process_record] {
 
 set end_location  [gdb_get_line_number "end of main"  ]
 gdb_test "break $end_location" \
-    "Breakpoint $decimal at .*/$srcfile, line $end_location\." \
+    "Breakpoint $decimal at .*$srcfile, line $end_location\." \
     "BP at end of main"
 
 gdb_test "continue" "Breakpoint .* end of main .*" "run to end of main"
@@ -65,7 +65,7 @@  gdb_test "break marker2" \
     "Breakpoint $decimal at $hex: file .*$srcfile, line $decimal.*" \
     "set breakpoint at marker2"
 
-gdb_continue_to_breakpoint "marker1" ".*/$srcfile:.*"
+gdb_continue_to_breakpoint "marker1" ".*$srcfile:.*"
 
 gdb_test "watch ival3" \
     ".*\[Ww\]atchpoint $decimal: ival3.*" \
@@ -102,7 +102,7 @@  gdb_test "continue" \
 # Continue until we hit the finishing marker function.
 # Make sure we hit no more watchpoints.
 
-gdb_continue_to_breakpoint "marker2" ".*/$srcfile:.*"
+gdb_continue_to_breakpoint "marker2" ".*$srcfile:.*"
 
 ###
 ###
diff --git a/gdb/testsuite/gdb.reverse/watch-reverse.exp b/gdb/testsuite/gdb.reverse/watch-reverse.exp
index ab2a0ea..20a38cf 100644
--- a/gdb/testsuite/gdb.reverse/watch-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/watch-reverse.exp
@@ -46,7 +46,7 @@  gdb_test "break marker2" \
     "Breakpoint $decimal at $hex: file .*$srcfile, line $decimal.*" \
     "set breakpoint at marker2"
 
-gdb_continue_to_breakpoint "marker1" ".*/$srcfile:.*"
+gdb_continue_to_breakpoint "marker1" ".*$srcfile:.*"
 
 gdb_test "watch ival3" \
     ".*\[Ww\]atchpoint $decimal: ival3.*" \
@@ -83,7 +83,7 @@  gdb_test "continue" \
 # Continue until we hit the finishing marker function.
 # Make sure we hit no more watchpoints.
 
-gdb_continue_to_breakpoint "marker2" ".*/$srcfile:.*"
+gdb_continue_to_breakpoint "marker2" ".*$srcfile:.*"
 
 ###
 ###