@@ -5249,7 +5249,7 @@ watchpoint_check (bpstat *bs)
/* BS is built from an existing struct breakpoint. */
gdb_assert (bs->breakpoint_at != NULL);
- b = (struct watchpoint *) bs->breakpoint_at;
+ b = gdb::checked_static_cast<struct watchpoint *> (bs->breakpoint_at);
/* If this is a local watchpoint, we only want to check if the
watchpoint frame is in scope if the current thread is the thread
@@ -5410,158 +5410,155 @@ bpstat_check_watchpoint (bpstat *bs)
/* BS is built for existing struct breakpoint. */
bl = bs->bp_location_at.get ();
gdb_assert (bl != NULL);
- b = (struct watchpoint *) bs->breakpoint_at;
- gdb_assert (b != NULL);
-
- {
- bool must_check_value = false;
-
- if (b->type == bp_watchpoint)
- /* For a software watchpoint, we must always check the
- watched value. */
- must_check_value = true;
- else if (b->watchpoint_triggered == watch_triggered_yes)
- /* We have a hardware watchpoint (read, write, or access)
- and the target earlier reported an address watched by
- this watchpoint. */
- must_check_value = true;
- else if (b->watchpoint_triggered == watch_triggered_unknown
- && b->type == bp_hardware_watchpoint)
- /* We were stopped by a hardware watchpoint, but the target could
- not report the data address. We must check the watchpoint's
- value. Access and read watchpoints are out of luck; without
- a data address, we can't figure it out. */
- must_check_value = true;
+ b = gdb::checked_static_cast<struct watchpoint *> (bs->breakpoint_at);
+
+ bool must_check_value = false;
+
+ if (b->type == bp_watchpoint)
+ /* For a software watchpoint, we must always check the
+ watched value. */
+ must_check_value = true;
+ else if (b->watchpoint_triggered == watch_triggered_yes)
+ /* We have a hardware watchpoint (read, write, or access)
+ and the target earlier reported an address watched by
+ this watchpoint. */
+ must_check_value = true;
+ else if (b->watchpoint_triggered == watch_triggered_unknown
+ && b->type == bp_hardware_watchpoint)
+ /* We were stopped by a hardware watchpoint, but the target could
+ not report the data address. We must check the watchpoint's
+ value. Access and read watchpoints are out of luck; without
+ a data address, we can't figure it out. */
+ must_check_value = true;
+
+ if (must_check_value)
+ {
+ wp_check_result e;
- if (must_check_value)
+ try
+ {
+ e = watchpoint_check (bs);
+ }
+ catch (const gdb_exception_error &ex)
{
- wp_check_result e;
+ exception_fprintf (gdb_stderr, ex,
+ "Error evaluating expression "
+ "for watchpoint %d\n",
+ b->number);
- try
- {
- e = watchpoint_check (bs);
- }
- catch (const gdb_exception_error &ex)
+ SWITCH_THRU_ALL_UIS ()
{
- exception_fprintf (gdb_stderr, ex,
- "Error evaluating expression "
- "for watchpoint %d\n",
- b->number);
-
- SWITCH_THRU_ALL_UIS ()
- {
- gdb_printf (_("Watchpoint %d deleted.\n"),
- b->number);
- }
- watchpoint_del_at_next_stop (b);
- e = WP_DELETED;
+ gdb_printf (_("Watchpoint %d deleted.\n"),
+ b->number);
}
+ watchpoint_del_at_next_stop (b);
+ e = WP_DELETED;
+ }
- switch (e)
+ switch (e)
+ {
+ case WP_DELETED:
+ /* We've already printed what needs to be printed. */
+ bs->print_it = print_it_done;
+ /* Stop. */
+ break;
+ case WP_IGNORE:
+ bs->print_it = print_it_noop;
+ bs->stop = false;
+ break;
+ case WP_VALUE_CHANGED:
+ if (b->type == bp_read_watchpoint)
{
- case WP_DELETED:
- /* We've already printed what needs to be printed. */
- bs->print_it = print_it_done;
- /* Stop. */
- break;
- case WP_IGNORE:
- bs->print_it = print_it_noop;
- bs->stop = false;
- break;
- case WP_VALUE_CHANGED:
- if (b->type == bp_read_watchpoint)
+ /* There are two cases to consider here:
+
+ 1. We're watching the triggered memory for reads.
+ In that case, trust the target, and always report
+ the watchpoint hit to the user. Even though
+ reads don't cause value changes, the value may
+ have changed since the last time it was read, and
+ since we're not trapping writes, we will not see
+ those, and as such we should ignore our notion of
+ old value.
+
+ 2. We're watching the triggered memory for both
+ reads and writes. There are two ways this may
+ happen:
+
+ 2.1. This is a target that can't break on data
+ reads only, but can break on accesses (reads or
+ writes), such as e.g., x86. We detect this case
+ at the time we try to insert read watchpoints.
+
+ 2.2. Otherwise, the target supports read
+ watchpoints, but, the user set an access or write
+ watchpoint watching the same memory as this read
+ watchpoint.
+
+ If we're watching memory writes as well as reads,
+ ignore watchpoint hits when we find that the
+ value hasn't changed, as reads don't cause
+ changes. This still gives false positives when
+ the program writes the same value to memory as
+ what there was already in memory (we will confuse
+ it for a read), but it's much better than
+ nothing. */
+
+ int other_write_watchpoint = 0;
+
+ if (bl->watchpoint_type == hw_read)
{
- /* There are two cases to consider here:
-
- 1. We're watching the triggered memory for reads.
- In that case, trust the target, and always report
- the watchpoint hit to the user. Even though
- reads don't cause value changes, the value may
- have changed since the last time it was read, and
- since we're not trapping writes, we will not see
- those, and as such we should ignore our notion of
- old value.
-
- 2. We're watching the triggered memory for both
- reads and writes. There are two ways this may
- happen:
-
- 2.1. This is a target that can't break on data
- reads only, but can break on accesses (reads or
- writes), such as e.g., x86. We detect this case
- at the time we try to insert read watchpoints.
-
- 2.2. Otherwise, the target supports read
- watchpoints, but, the user set an access or write
- watchpoint watching the same memory as this read
- watchpoint.
-
- If we're watching memory writes as well as reads,
- ignore watchpoint hits when we find that the
- value hasn't changed, as reads don't cause
- changes. This still gives false positives when
- the program writes the same value to memory as
- what there was already in memory (we will confuse
- it for a read), but it's much better than
- nothing. */
-
- int other_write_watchpoint = 0;
-
- if (bl->watchpoint_type == hw_read)
- {
- for (breakpoint &other_b : all_breakpoints ())
- if (other_b.type == bp_hardware_watchpoint
- || other_b.type == bp_access_watchpoint)
+ for (breakpoint &other_b : all_breakpoints ())
+ if (other_b.type == bp_hardware_watchpoint
+ || other_b.type == bp_access_watchpoint)
+ {
+ watchpoint &other_w =
+ gdb::checked_static_cast<watchpoint &> (other_b);
+
+ if (other_w.watchpoint_triggered
+ == watch_triggered_yes)
{
- watchpoint &other_w =
- gdb::checked_static_cast<watchpoint &> (other_b);
-
- if (other_w.watchpoint_triggered
- == watch_triggered_yes)
- {
- other_write_watchpoint = 1;
- break;
- }
+ other_write_watchpoint = 1;
+ break;
}
- }
-
- if (other_write_watchpoint
- || bl->watchpoint_type == hw_access)
- {
- /* We're watching the same memory for writes,
- and the value changed since the last time we
- updated it, so this trap must be for a write.
- Ignore it. */
- bs->print_it = print_it_noop;
- bs->stop = false;
- }
+ }
}
- break;
- case WP_VALUE_NOT_CHANGED:
- if (b->type == bp_hardware_watchpoint
- || b->type == bp_watchpoint)
+
+ if (other_write_watchpoint
+ || bl->watchpoint_type == hw_access)
{
- /* Don't stop: write watchpoints shouldn't fire if
- the value hasn't changed. */
+ /* We're watching the same memory for writes,
+ and the value changed since the last time we
+ updated it, so this trap must be for a write.
+ Ignore it. */
bs->print_it = print_it_noop;
bs->stop = false;
}
- /* Stop. */
- break;
- default:
- /* Can't happen. */
- break;
}
+ break;
+ case WP_VALUE_NOT_CHANGED:
+ if (b->type == bp_hardware_watchpoint
+ || b->type == bp_watchpoint)
+ {
+ /* Don't stop: write watchpoints shouldn't fire if
+ the value hasn't changed. */
+ bs->print_it = print_it_noop;
+ bs->stop = false;
+ }
+ /* Stop. */
+ break;
+ default:
+ /* Can't happen. */
+ break;
}
- else /* !must_check_value */
- {
- /* This is a case where some watchpoint(s) triggered, but
- not at the address of this watchpoint, or else no
- watchpoint triggered after all. So don't print
- anything for this watchpoint. */
- bs->print_it = print_it_noop;
- bs->stop = false;
- }
+ }
+ else /* !must_check_value */
+ {
+ /* This is a case where some watchpoint(s) triggered, but
+ not at the address of this watchpoint, or else no
+ watchpoint triggered after all. So don't print
+ anything for this watchpoint. */
+ bs->print_it = print_it_noop;
+ bs->stop = false;
}
}
@@ -5625,7 +5622,7 @@ bpstat_check_breakpoint_conditions (bpstat *bs, thread_info *thread)
if (is_watchpoint (b))
{
- struct watchpoint *w = (struct watchpoint *) b;
+ struct watchpoint *w = gdb::checked_static_cast<struct watchpoint *> (b);
cond = w->cond_exp.get ();
}
@@ -5644,7 +5641,7 @@ bpstat_check_breakpoint_conditions (bpstat *bs, thread_info *thread)
scoped_value_mark mark;
if (is_watchpoint (b))
- w = (struct watchpoint *) b;
+ w = gdb::checked_static_cast<struct watchpoint *> (b);
else
w = NULL;
@@ -5794,7 +5791,8 @@ build_bpstat_chain (const address_space *aspace, CORE_ADDR bp_addr,
iteration. */
if (b.type == bp_watchpoint_scope && b.related_breakpoint != &b)
{
- struct watchpoint *w = (struct watchpoint *) b.related_breakpoint;
+ struct watchpoint *w
+ = gdb::checked_static_cast<struct watchpoint *> (b.related_breakpoint);
w->watchpoint_triggered = watch_triggered_yes;
}
@@ -5918,7 +5916,8 @@ bpstat_stop_status (const address_space *aspace,
&& bs->breakpoint_at
&& is_hardware_watchpoint (bs->breakpoint_at))
{
- struct watchpoint *w = (struct watchpoint *) bs->breakpoint_at;
+ struct watchpoint *w
+ = gdb::checked_static_cast<struct watchpoint *> (bs->breakpoint_at);
update_watchpoint (w, false /* don't reparse. */);
need_remove_insert = 1;
@@ -6568,7 +6567,8 @@ print_one_breakpoint_location (struct breakpoint *b,
{
if (is_watchpoint (b))
{
- struct watchpoint *w = (struct watchpoint *) b;
+ struct watchpoint *w
+ = gdb::checked_static_cast<struct watchpoint *> (b);
/* Field 4, the address, is omitted (which makes the columns
not line up too nicely with the headers, but the effect
@@ -6828,7 +6828,8 @@ print_one_breakpoint_location (struct breakpoint *b,
{
if (is_watchpoint (b))
{
- struct watchpoint *w = (struct watchpoint *) b;
+ struct watchpoint *w
+ = gdb::checked_static_cast<struct watchpoint *> (b);
uiout->field_string ("original-location", w->exp_string.get ());
}
@@ -7257,8 +7258,10 @@ static bool
watchpoint_locations_match (const struct bp_location *loc1,
const struct bp_location *loc2)
{
- struct watchpoint *w1 = (struct watchpoint *) loc1->owner;
- struct watchpoint *w2 = (struct watchpoint *) loc2->owner;
+ struct watchpoint *w1
+ = gdb::checked_static_cast<struct watchpoint *> (loc1->owner);
+ struct watchpoint *w2
+ = gdb::checked_static_cast<struct watchpoint *> (loc2->owner);
/* Both of them must exist. */
gdb_assert (w1 != NULL);
@@ -12604,9 +12607,9 @@ delete_breakpoint (struct breakpoint *bpt)
struct watchpoint *w;
if (bpt->type == bp_watchpoint_scope)
- w = (struct watchpoint *) bpt->related_breakpoint;
+ w = gdb::checked_static_cast<struct watchpoint *> (bpt->related_breakpoint);
else if (bpt->related_breakpoint->type == bp_watchpoint_scope)
- w = (struct watchpoint *) bpt;
+ w = gdb::checked_static_cast<struct watchpoint *> (bpt);
else
w = NULL;
if (w != NULL)
@@ -13770,7 +13773,8 @@ enable_breakpoint_disp (struct breakpoint *bpt, enum bpdisp disposition,
try
{
- struct watchpoint *w = (struct watchpoint *) bpt;
+ struct watchpoint *w
+ = gdb::checked_static_cast<struct watchpoint *> (bpt);
orig_enable_state = bpt->enable_state;
bpt->enable_state = bp_enabled;
@@ -895,7 +895,7 @@ gdbscm_breakpoint_expression (SCM self)
if (!is_watchpoint (bp_smob->bp))
return SCM_BOOL_F;
- wp = (struct watchpoint *) bp_smob->bp;
+ wp = gdb::checked_static_cast<struct watchpoint *> (bp_smob->bp);
const char *str = wp->exp_string.get ();
if (! str)
@@ -556,7 +556,7 @@ bppy_get_expression (PyObject *self, void *closure)
if (!is_watchpoint (obj->bp))
Py_RETURN_NONE;
- wp = (struct watchpoint *) obj->bp;
+ wp = gdb::checked_static_cast<struct watchpoint *> (obj->bp);
str = wp->exp_string.get ();
if (! str)