Sourceware to Gerrit sync has submitted this change.
Change URL: https://gnutoolchain-gerrit.osci.io/r/c/binutils-gdb/+/625
......................................................................
Use gnulib's strerror_r on MinGW
There is no need to keep mingw-strerror around; we can just always use
the code from posix-strerror. The main reason we had that code, it
seems, is to handle winsock error codes, but gnulib's version
handles those.
Unfortunately the code can't be moved into common-utils.c because
libinproctrace.so uses common-utils but not gnulib.
gdb/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Replace {posix,mingw}-strerror.c with safe-strerror.c.
* configure: Regenerate.
* configure.ac: Don't source common.host.
* gdbsupport/common.host: Remove.
* gdbsupport/mingw-strerror.c: Remove.
* gdbsupport/posix-strerror.c: Rename to...
* gdbsupport/safe-strerror.c: ...this.
gdb/gdbserver/ChangeLog:
2019-11-15 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Add safe-strerror.c.
* configure: Regenerate.
* configure.ac: Don't source common.host.
Change-Id: I9e6d8a752fc398784201f370cafee65e0ea05474
---
M gdb/ChangeLog
M gdb/Makefile.in
M gdb/configure
M gdb/configure.ac
M gdb/gdbserver/ChangeLog
M gdb/gdbserver/Makefile.in
M gdb/gdbserver/configure
M gdb/gdbserver/configure.ac
D gdb/gdbsupport/common.host
D gdb/gdbsupport/mingw-strerror.c
R gdb/gdbsupport/safe-strerror.c
11 files changed, 23 insertions(+), 122 deletions(-)
@@ -1,5 +1,15 @@
2019-11-15 Christian Biesinger <cbiesinger@google.com>
+ * Makefile.in: Replace {posix,mingw}-strerror.c with safe-strerror.c.
+ * configure: Regenerate.
+ * configure.ac: Don't source common.host.
+ * gdbsupport/common.host: Remove.
+ * gdbsupport/mingw-strerror.c: Remove.
+ * gdbsupport/posix-strerror.c: Rename to...
+ * gdbsupport/safe-strerror.c: ...this.
+
+2019-11-15 Christian Biesinger <cbiesinger@google.com>
+
* maint.c (scoped_command_stats::print_time): Use localtime_r
instead of localtime (provided through gnulib if necessary).
* nat/linux-osdata.c (time_from_time_t): Use ctime_r instead
@@ -986,6 +986,7 @@
gdbsupport/ptid.c \
gdbsupport/rsp-low.c \
gdbsupport/run-time-clock.c \
+ gdbsupport/safe-strerror.c \
gdbsupport/scoped_mmap.c \
gdbsupport/signals.c \
gdbsupport/signals-state-save-restore.c \
@@ -2344,9 +2345,7 @@
xtensa-linux-nat.c \
xtensa-linux-tdep.c \
xtensa-tdep.c \
- xtensa-xtregs.c \
- gdbsupport/mingw-strerror.c \
- gdbsupport/posix-strerror.c
+ xtensa-xtregs.c
# Some files need explicit build rules (due to -Werror problems) or due
# to sub-directory fun 'n' games.
@@ -6556,10 +6556,6 @@
. $srcdir/configure.host
-# Add in the common host objects.
-. $srcdir/gdbsupport/common.host
-gdb_host_obs="$gdb_host_obs $common_host_obs"
-
# Accumulate some settings from configure.tgt over all enabled targets
TARGET_OBS=
@@ -177,10 +177,6 @@
. $srcdir/configure.host
-# Add in the common host objects.
-. $srcdir/gdbsupport/common.host
-gdb_host_obs="$gdb_host_obs $common_host_obs"
-
# Accumulate some settings from configure.tgt over all enabled targets
TARGET_OBS=
@@ -1,5 +1,11 @@
2019-11-15 Christian Biesinger <cbiesinger@google.com>
+ * Makefile.in: Add safe-strerror.c.
+ * configure: Regenerate.
+ * configure.ac: Don't source common.host.
+
+2019-11-15 Christian Biesinger <cbiesinger@google.com>
+
* config.in: Regenerate.
* configure: Regenerate.
@@ -220,6 +220,7 @@
$(srcdir)/gdbsupport/print-utils.c \
$(srcdir)/gdbsupport/ptid.c \
$(srcdir)/gdbsupport/rsp-low.c \
+ $(srcdir)/gdbsupport/safe-strerror.c \
$(srcdir)/gdbsupport/tdesc.c \
$(srcdir)/gdbsupport/xml-utils.c \
$(srcdir)/nat/aarch64-sve-linux-ptrace.c \
@@ -266,6 +267,7 @@
gdbsupport/print-utils.o \
gdbsupport/ptid.o \
gdbsupport/rsp-low.o \
+ gdbsupport/safe-strerror.o \
gdbsupport/signals.o \
gdbsupport/signals-state-save-restore.o \
gdbsupport/tdesc.o \
@@ -7825,10 +7825,6 @@
. ${srcdir}/configure.srv
-# Add in the common host objects.
-. ${srcdir}/../gdbsupport/common.host
-srv_host_obs="$common_host_obs"
-
if test "${srv_mingwce}" = "yes"; then
LIBS="$LIBS -lws2"
elif test "${srv_mingw}" = "yes"; then
@@ -8361,7 +8357,7 @@
done
fi
-GDBSERVER_DEPFILES="$srv_regobj $srv_tgtobj $srv_hostio_err_objs $srv_thread_depfiles $srv_host_obs $srv_selftest_objs"
+GDBSERVER_DEPFILES="$srv_regobj $srv_tgtobj $srv_hostio_err_objs $srv_thread_depfiles $srv_selftest_objs"
GDBSERVER_LIBS="$srv_libs"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the target supports __sync_*_compare_and_swap" >&5
@@ -245,10 +245,6 @@
. ${srcdir}/configure.srv
-# Add in the common host objects.
-. ${srcdir}/../gdbsupport/common.host
-srv_host_obs="$common_host_obs"
-
if test "${srv_mingwce}" = "yes"; then
LIBS="$LIBS -lws2"
elif test "${srv_mingw}" = "yes"; then
@@ -393,7 +389,7 @@
done
fi
-GDBSERVER_DEPFILES="$srv_regobj $srv_tgtobj $srv_hostio_err_objs $srv_thread_depfiles $srv_host_obs $srv_selftest_objs"
+GDBSERVER_DEPFILES="$srv_regobj $srv_tgtobj $srv_hostio_err_objs $srv_thread_depfiles $srv_selftest_objs"
GDBSERVER_LIBS="$srv_libs"
dnl Check whether the target supports __sync_*_compare_and_swap.
deleted file mode 100644
@@ -1,36 +0,0 @@
-# Common object files to include for each host.
-#
-# Copyright (C) 2015-2019 Free Software Foundation, Inc.
-#
-# This file is part of GDB.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# Map host triplet into the common object files to be included by
-# GDB/gdbserver. This is invoked from the autoconf generated
-# configure script.
-
-# This file sets the following shell variables:
-# common_host_obs host-specific .o files to include when building
-# GDB/gdbserver
-
-case "${host}" in
-
-*-mingw*) common_host_obs=gdbsupport/mingw-strerror.o
- ;;
-*)
- common_host_obs=gdbsupport/posix-strerror.o
- ;;
-
-esac
deleted file mode 100644
@@ -1,64 +0,0 @@
-/* Safe version of strerror for MinGW, for GDB, the GNU debugger.
-
- Copyright (C) 2006-2019 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include "common-defs.h"
-
-#include <windows.h>
-
-/* Implementation of safe_strerror as defined in common-utils.h.
-
- The Windows runtime implementation of strerror never returns NULL,
- but does return a useless string for anything above sys_nerr;
- unfortunately this includes all socket-related error codes.
- This replacement tries to find a system-provided error message. */
-
-const char *
-safe_strerror (int errnum)
-{
- static char *buffer;
- int len;
-
- if (errnum >= 0 && errnum < sys_nerr)
- return strerror (errnum);
-
- if (buffer)
- {
- LocalFree (buffer);
- buffer = NULL;
- }
-
- if (FormatMessage (FORMAT_MESSAGE_ALLOCATE_BUFFER
- | FORMAT_MESSAGE_FROM_SYSTEM,
- NULL, errnum,
- MAKELANGID (LANG_NEUTRAL, SUBLANG_DEFAULT),
- (LPTSTR) &buffer, 0, NULL) == 0)
- {
- static char buf[32];
- xsnprintf (buf, sizeof buf, "(undocumented errno %d)", errnum);
- return buf;
- }
-
- /* Windows error messages end with a period and a CR-LF; strip that
- out. */
- len = strlen (buffer);
- if (len > 3 && strcmp (buffer + len - 3, ".\r\n") == 0)
- buffer[len - 3] = '\0';
-
- return buffer;
-}
similarity index 94%
rename from gdb/gdbsupport/posix-strerror.c
rename to gdb/gdbsupport/safe-strerror.c
@@ -1,4 +1,4 @@
-/* Safe version of strerror for POSIX systems for GDB, the GNU debugger.
+/* Safe version of strerror for GDB, the GNU debugger.
Copyright (C) 2006-2019 Free Software Foundation, Inc.