[01/12] Switch to current thread in finish_step_over
Commit Message
V2: move current_thread switch into finsh_step_over
This patch adds some sanity check that reinsert breakpoints must be
there when doing step-over on software single step target. The check
triggers an assert when running forking-threads-plus-breakpoint.exp
on arm-linux target,
gdb/gdbserver/linux-low.c:4714: A problem internal to GDBserver has been detected.^M
int finish_step_over(lwp_info*): Assertion `has_reinsert_breakpoints ()' failed.
the error happens when GDBserver has already resumed a thread of
process A for step-over (and wait for it hitting reinsert breakpoint),
but receives detach request for process B from GDB, which is shown in
the backtrace below,
(gdb) bt
#2 0x000228aa in finish_step_over (lwp=0x12bbd98) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4703
#3 0x00025a50 in finish_step_over (lwp=0x12bbd98) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4749
#4 complete_ongoing_step_over () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4760
#5 linux_detach (pid=25228) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:1503
#6 0x00012bae in process_serial_event () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:3974
#7 handle_serial_event (err=<optimized out>, client_data=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:4347
#8 0x00016d68 in handle_file_event (event_file_desc=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/event-loop.c:429
#9 0x000173ea in process_event () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/event-loop.c:184
#10 start_event_loop () at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/event-loop.c:547
#11 0x0000aa2c in captured_main (argv=<optimized out>, argc=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:3719
#12 main (argc=<optimized out>, argv=<optimized out>) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/server.c:3804
the sanity check tries to find the reinsert breakpoint from process B,
but nothing is found. It is wrong, we need to search in process A,
since we started step-over of a thread of process A.
(gdb) p lwp->thread->entry.id
$3 = {pid = 25120, lwp = 25131, tid = 0}
(gdb) p current_thread->entry.id
$4 = {pid = 25228, lwp = 25228, tid = 0}
This patch switched current_thread to the thread we are doing step-over
in complete_ongoing_step_over.
gdb/gdbserver:
2016-05-31 Yao Qi <yao.qi@linaro.org>
* linux-low.c (maybe_hw_step): New function.
(linux_resume_one_lwp_throw): Call maybe_hw_step.
(finish_step_over): Switch current_thread to lwp temporarily,
and assert has_reinsert_breakpoints returns true.
(proceed_one_lwp): Call maybe_hw_step.
* mem-break.c (has_reinsert_breakpoints): New function.
* mem-break.h (has_reinsert_breakpoints): Declare.
---
gdb/gdbserver/linux-low.c | 35 +++++++++++++++++++++++++++++++----
gdb/gdbserver/mem-break.c | 22 ++++++++++++++++++++++
gdb/gdbserver/mem-break.h | 4 ++++
3 files changed, 57 insertions(+), 4 deletions(-)
Comments
On 06/02/2016 10:30 AM, Yao Qi wrote:
> V2: move current_thread switch into finsh_step_over
Thanks.
> This patch switched current_thread to the thread we are doing step-over
> in complete_ongoing_step_over.
>
^ This sentence is now stale.
> gdb/gdbserver:
>
> 2016-05-31 Yao Qi <yao.qi@linaro.org>
>
> * linux-low.c (maybe_hw_step): New function.
> (linux_resume_one_lwp_throw): Call maybe_hw_step.
> (finish_step_over): Switch current_thread to lwp temporarily,
> and assert has_reinsert_breakpoints returns true.
> (proceed_one_lwp): Call maybe_hw_step.
> * mem-break.c (has_reinsert_breakpoints): New function.
> * mem-break.h (has_reinsert_breakpoints): Declare.
Otherwise OK.
Thanks,
Pedro Alves
@@ -2495,6 +2495,24 @@ linux_low_filter_event (int lwpid, int wstat)
return child;
}
+/* Return true if THREAD is doing hardware single step. */
+
+static int
+maybe_hw_step (struct thread_info *thread)
+{
+ if (can_hardware_single_step ())
+ return 1;
+ else
+ {
+ struct process_info *proc = get_thread_process (thread);
+
+ /* GDBserver must insert reinsert breakpoint for software
+ single step. */
+ gdb_assert (has_reinsert_breakpoints (proc));
+ return 0;
+ }
+}
+
/* Resume LWPs that are currently stopped without any pending status
to report, but are resumed from the core's perspective. */
@@ -4215,9 +4233,9 @@ linux_resume_one_lwp_throw (struct lwp_info *lwp,
fprintf (stderr, "BAD - reinserting and suspended(%d).\n",
lwp->suspended);
}
-
- step = 1;
}
+
+ step = maybe_hw_step (thread);
}
if (fast_tp_collecting == 1)
@@ -4689,9 +4707,13 @@ finish_step_over (struct lwp_info *lwp)
{
if (lwp->bp_reinsert != 0)
{
+ struct thread_info *saved_thread = current_thread;
+
if (debug_threads)
debug_printf ("Finished step over.\n");
+ current_thread = get_lwp_thread (lwp);
+
/* Reinsert any breakpoint at LWP->BP_REINSERT. Note that there
may be no breakpoint to reinsert there by now. */
reinsert_breakpoints_at (lwp->bp_reinsert);
@@ -4705,9 +4727,13 @@ finish_step_over (struct lwp_info *lwp)
because we were stepping over a breakpoint, and we hold all
threads but LWP stopped while doing that. */
if (!can_hardware_single_step ())
- delete_reinsert_breakpoints ();
+ {
+ gdb_assert (has_reinsert_breakpoints (current_process ()));
+ delete_reinsert_breakpoints ();
+ }
step_over_bkpt = null_ptid;
+ current_thread = saved_thread;
return 1;
}
else
@@ -5029,7 +5055,8 @@ proceed_one_lwp (struct inferior_list_entry *entry, void *except)
if (debug_threads)
debug_printf (" stepping LWP %ld, reinsert set\n",
lwpid_of (thread));
- step = 1;
+
+ step = maybe_hw_step (thread);
}
else
step = 0;
@@ -1553,6 +1553,28 @@ reinsert_breakpoints_at (CORE_ADDR pc)
}
}
+int
+has_reinsert_breakpoints (struct process_info *proc)
+{
+ struct breakpoint *bp, **bp_link;
+
+ bp = proc->breakpoints;
+ bp_link = &proc->breakpoints;
+
+ while (bp)
+ {
+ if (bp->type == reinsert_breakpoint)
+ return 1;
+ else
+ {
+ bp_link = &bp->next;
+ bp = *bp_link;
+ }
+ }
+
+ return 0;
+}
+
void
reinsert_all_breakpoints (void)
{
@@ -163,6 +163,10 @@ void delete_reinsert_breakpoints (void);
void reinsert_breakpoints_at (CORE_ADDR where);
+/* Process PROC has reinsert breakpoints or not. */
+
+int has_reinsert_breakpoints (struct process_info *proc);
+
/* Uninsert breakpoints at WHERE (and change their status to
uninserted). This still leaves the breakpoints in the table. */