diff mbox

[1/3] Drop remaining references to removed source lines in break1.c and ur1.c

Message ID 1415990846-9482-2-git-send-email-arnez@linux.vnet.ibm.com
State New
Headers show

Commit Message

Andreas Arnez Nov. 14, 2014, 6:47 p.m. UTC
In some .exp files it was missed to remove the references to
eye-catchers like "set breakpoint 9 here" when the non-prototype
function header variants they belonged to were deleted.  This patch
cleans this up.

gdb/testsuite/ChangeLog:

	* gdb.base/condbreak.exp: Drop references to removed non-prototype
	function header variants in break1.c.
	* gdb.base/ena-dis-br.exp: Likewise.
	* gdb.base/hbreak2.exp: Likewise.
	* gdb.reverse/until-precsave.exp: Drop references to removed
	non-prototype function header variants in ur1.c.
	* gdb.reverse/until-reverse.exp: Likewise.
---
 gdb/testsuite/gdb.base/condbreak.exp         | 28 ++++++++++++----------------
 gdb/testsuite/gdb.base/ena-dis-br.exp        | 26 +++++++++++---------------
 gdb/testsuite/gdb.base/hbreak2.exp           | 25 ++++++++-----------------
 gdb/testsuite/gdb.reverse/until-precsave.exp |  6 +++---
 gdb/testsuite/gdb.reverse/until-reverse.exp  |  6 +++---
 5 files changed, 37 insertions(+), 54 deletions(-)
diff mbox

Patch

diff --git a/gdb/testsuite/gdb.base/condbreak.exp b/gdb/testsuite/gdb.base/condbreak.exp
index 123428c..0c26b27 100644
--- a/gdb/testsuite/gdb.base/condbreak.exp
+++ b/gdb/testsuite/gdb.base/condbreak.exp
@@ -38,13 +38,9 @@  clean_restart ${binfile}
 set bp_location1  [gdb_get_line_number "set breakpoint 1 here"]
 set bp_location6  [gdb_get_line_number "set breakpoint 6 here"]
 set bp_location8  [gdb_get_line_number "set breakpoint 8 here" $srcfile2]
-set bp_location9  [gdb_get_line_number "set breakpoint 9 here" $srcfile2]
-set bp_location13 [gdb_get_line_number "set breakpoint 13 here" $srcfile2]
 set bp_location14 [gdb_get_line_number "set breakpoint 14 here" $srcfile2]
 set bp_location15 [gdb_get_line_number "set breakpoint 15 here" $srcfile2]
-set bp_location16 [gdb_get_line_number "set breakpoint 16 here" $srcfile2]
 set bp_location17 [gdb_get_line_number "set breakpoint 17 here" $srcfile2]
-set bp_location18 [gdb_get_line_number "set breakpoint 18 here" $srcfile2]
 
 #
 # test break at function
@@ -113,15 +109,15 @@  if {$hp_aCC_compiler} {
 gdb_test "info break" \
     "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
 \[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:$bp_location6.*
-\[0-9\]+\[\t \]+breakpoint     keep y.* in marker1$marker1_proto at .*$srcfile2:($bp_location15|$bp_location16).*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in marker1$marker1_proto at .*$srcfile2:$bp_location15.*
 \[\t \]+stop only if \\(1==1\\).*
 \[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:$bp_location1.*
 \[\t \]+stop only if \\(1==1\\).*
-\[0-9\]+\[\t \]+breakpoint     keep y.* in marker2$marker2_proto at .*$srcfile2:($bp_location8|$bp_location9).*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in marker2$marker2_proto at .*$srcfile2:$bp_location8.*
 \[\t \]+stop only if \\(a==43\\).*
-\[0-9\]+\[\t \]+breakpoint     keep y.* in marker3$marker3_proto at .*$srcfile2:($bp_location17|$bp_location18).*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in marker3$marker3_proto at .*$srcfile2:$bp_location17.*
 \[\t \]+stop only if \\(multi_line_if_conditional\\(1,1,1\\)==0\\).*
-\[0-9\]+\[\t \]+breakpoint     keep y.* in marker4$marker4_proto at .*$srcfile2:($bp_location13|$bp_location14).*" \
+\[0-9\]+\[\t \]+breakpoint     keep y.* in marker4$marker4_proto at .*$srcfile2:$bp_location14.*" \
     "breakpoint info"
 
 
@@ -179,10 +175,10 @@  gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.
 #
 # Until the Dwarf2 writer gets fixed, I'm going to XFAIL its behavior.
 gdb_test_multiple "continue" "run until breakpoint at marker1" {
-    -re  "Continuing\\..*Breakpoint \[0-9\]+, marker1 \\(\\) at .*$srcfile2:($bp_location15|$bp_location16).*($bp_location15|$bp_location16)\[\t \]+.*$gdb_prompt $" {
+    -re  "Continuing\\..*Breakpoint \[0-9\]+, marker1 \\(\\) at .*$srcfile2:$bp_location15.*$bp_location15\[\t \]+.*$gdb_prompt $" {
 	pass "run until breakpoint at marker1"
     }
-    -re  "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker1 \\(\\) at .*$srcfile2:($bp_location15|$bp_location16).*($bp_location15|$bp_location16)\[\t \]+.*$gdb_prompt $" {
+    -re  "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker1 \\(\\) at .*$srcfile2:$bp_location15.*$bp_location15\[\t \]+.*$gdb_prompt $" {
 	xfail "run until breakpoint at marker1"
     }
 }
@@ -191,10 +187,10 @@  gdb_test_multiple "continue" "run until breakpoint at marker1" {
 # Same issues here as above.
 setup_xfail hppa2.0w-*-* 11512CLLbs
 gdb_test_multiple "continue" "run until breakpoint at marker2" {
-    -re "Continuing\\..*Breakpoint \[0-9\]+, marker2 \\(a=43\\) at .*$srcfile2:($bp_location8|$bp_location9).*($bp_location8|$bp_location9)\[\t \]+.*$gdb_prompt $" {
+    -re "Continuing\\..*Breakpoint \[0-9\]+, marker2 \\(a=43\\) at .*$srcfile2:$bp_location8.*$bp_location8\[\t \]+.*$gdb_prompt $" {
 	pass "run until breakpoint at marker2"
     }
-    -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker2 \\(a=43\\) at .*$srcfile2:($bp_location8|$bp_location9).*($bp_location8|$bp_location9)\[\t \]+.*$gdb_prompt $" {
+    -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker2 \\(a=43\\) at .*$srcfile2:$bp_location8.*$bp_location8\[\t \]+.*$gdb_prompt $" {
 	xfail "run until breakpoint at marker2"
     }
 }
@@ -228,20 +224,20 @@  gdb_test "break *main if (1==1) ta 999" \
 
 set test "run until breakpoint at marker3"
 gdb_test_multiple "continue" $test {
-    -re "Continuing\\..*Breakpoint \[0-9\]+, marker3 \\(a=$hex \"stack\", b=$hex \"trace\"\\) at .*$srcfile2:($bp_location17|$bp_location18).*($bp_location17|$bp_location18)\[\t \]+.*$gdb_prompt $" {
+    -re "Continuing\\..*Breakpoint \[0-9\]+, marker3 \\(a=$hex \"stack\", b=$hex \"trace\"\\) at .*$srcfile2:$bp_location17.*$bp_location17\[\t \]+.*$gdb_prompt $" {
 	pass $test
     }
-    -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker3 \\(a=$hex \"stack\", b=$hex \"trace\"\\) at .*$srcfile2:($bp_location17|$bp_location18).*($bp_location17|$bp_location18)\[\t \]+.*$gdb_prompt $" {
+    -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker3 \\(a=$hex \"stack\", b=$hex \"trace\"\\) at .*$srcfile2:$bp_location17.*$bp_location17\[\t \]+.*$gdb_prompt $" {
 	xfail $test
     }
 }
 
 set test "run until breakpoint at marker4"
 gdb_test_multiple "continue" $test {
-    -re "Continuing\\..*Breakpoint \[0-9\]+, marker4 \\(d=177601976\\) at .*$srcfile2:($bp_location13|$bp_location14).*($bp_location13|$bp_location14)\[\t \]+.*$gdb_prompt $" {
+    -re "Continuing\\..*Breakpoint \[0-9\]+, marker4 \\(d=177601976\\) at .*$srcfile2:$bp_location14.*$bp_location14\[\t \]+.*$gdb_prompt $" {
 	pass $test
     }
-    -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker4 \\(d=177601976\\) at .*$srcfile2:($bp_location13|$bp_location14).*($bp_location13|$bp_location14)\[\t \]+.*$gdb_prompt $" {
+    -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker4 \\(d=177601976\\) at .*$srcfile2:$bp_location14.*$bp_location14\[\t \]+.*$gdb_prompt $" {
 	xfail $test
     }
 }
diff --git a/gdb/testsuite/gdb.base/ena-dis-br.exp b/gdb/testsuite/gdb.base/ena-dis-br.exp
index 6f2c469..4b2f5b9 100644
--- a/gdb/testsuite/gdb.base/ena-dis-br.exp
+++ b/gdb/testsuite/gdb.base/ena-dis-br.exp
@@ -29,14 +29,10 @@  if {[prepare_for_testing ${testfile}.exp ${testfile} \
 set bp_location1 [gdb_get_line_number "set breakpoint 1 here"]
 set bp_location7 [gdb_get_line_number "set breakpoint 7 here"]
 set bp_location8 [gdb_get_line_number "set breakpoint 8 here" $srcfile2]
-set bp_location9 [gdb_get_line_number "set breakpoint 9 here" $srcfile2]
 set bp_location11 [gdb_get_line_number "set breakpoint 11 here"]
-set bp_location13 [gdb_get_line_number "set breakpoint 13 here" $srcfile2]
 set bp_location14 [gdb_get_line_number "set breakpoint 14 here" $srcfile2]
 set bp_location15 [gdb_get_line_number "set breakpoint 15 here" $srcfile2]
-set bp_location16 [gdb_get_line_number "set breakpoint 16 here" $srcfile2]
 set bp_location17 [gdb_get_line_number "set breakpoint 17 here" $srcfile2]
-set bp_location18 [gdb_get_line_number "set breakpoint 18 here" $srcfile2]
 
 if ![runto_main] then { fail "enable/disable break tests suppressed" }
 
@@ -58,7 +54,7 @@  proc break_at { breakpoint where } {
     return $bp
 }
 
-set bp [break_at "marker1" " line ($bp_location15|$bp_location16)"]
+set bp [break_at "marker1" " line $bp_location15"]
 
 gdb_test_no_output "enable $bp" "enable break marker1"
 
@@ -82,7 +78,7 @@  gdb_test_no_output "delete $bp" "delete break marker1"
 
 # Verify that we can set a breakpoint to be self-disabling after the
 # first time it triggers.
-set bp [break_at "marker2" " line ($bp_location8|$bp_location9)"]
+set bp [break_at "marker2" " line $bp_location8"]
 
 gdb_test_no_output "enable once $bp" "enable once break marker2"
 
@@ -117,7 +113,7 @@  if ![runto_main] then {
     fail "enable/disable break tests suppressed"
 }
 
-set bp [break_at "marker3" " line ($bp_location17|$bp_location18)"]
+set bp [break_at "marker3" " line $bp_location17"]
 
 gdb_test_no_output "enable del $bp" "enable del break marker3"
 
@@ -126,7 +122,7 @@  gdb_test "info break $bp" \
     "info auto-deleted break marker2"
 
 gdb_test "continue" \
-    ".*marker3 .*:($bp_location17|$bp_location18).*" \
+    ".*marker3 .*:$bp_location17.*" \
     "continue to auto-deleted break marker3"
 
 gdb_test "info break $bp" \
@@ -136,7 +132,7 @@  gdb_test "info break $bp" \
 # Verify that we can set a breakpoint and manually disable it (we've
 # already proven that disabled bp's don't trigger).
 
-set bp [break_at "marker4" " line ($bp_location14|$bp_location13).*"]
+set bp [break_at "marker4" " line $bp_location14.*"]
 
 gdb_test_no_output "disable $bp" "disable break marker4"
 
@@ -153,7 +149,7 @@  if ![runto_main] then {
 
 set bp [break_at $bp_location7 "line $bp_location7"]
 
-set bp2 [break_at marker1 " line ($bp_location15|$bp_location16)"]
+set bp2 [break_at marker1 " line $bp_location15"]
 
 gdb_test_no_output "enable count 2 $bp" "disable break with count"
 
@@ -166,7 +162,7 @@  gdb_test "continue" \
     "continue from enable count, second time"
 
 gdb_test "continue" \
-    ".*marker1 .*:($bp_location15|$bp_location16).*" \
+    ".*marker1 .*:$bp_location15.*" \
     "continue through enable count, now disabled"
 
 # Verify that we can set a breakpoint with an ignore count N, which
@@ -177,7 +173,7 @@  if ![runto_main] then {
     fail "enable/disable break tests suppressed"
 }
 
-set bp [break_at "marker1" " line ($bp_location15|$bp_location16).*"]
+set bp [break_at "marker1" " line $bp_location15.*"]
 
 # Verify that an ignore of a non-existent breakpoint is gracefully
 # handled.
@@ -232,7 +228,7 @@  if ![runto_main] then {
     fail "enable/disable break tests suppressed"
 }
 
-set bp [break_at marker1 " line ($bp_location15|$bp_location16).*"]
+set bp [break_at marker1 " line $bp_location15.*"]
 
 gdb_test "ignore $bp 1" \
     "Will ignore next crossing of breakpoint \[0-9\]*.*" \
@@ -248,7 +244,7 @@  gdb_continue_to_end "no stop at ignored & auto-deleted break marker1"
 rerun_to_main
 
 gdb_test "continue" \
-    ".*marker1 .*:($bp_location15|$bp_location16).*" \
+    ".*marker1 .*:$bp_location15.*" \
     "continue to ignored & auto-deleted break marker1"
 
 # Verify that a disabled breakpoint's ignore count isn't updated when
@@ -258,7 +254,7 @@  if ![runto_main] then {
     fail "enable/disable break tests suppressed"
 }
 
-set bp [break_at marker1 " line ($bp_location15|$bp_location16)"]
+set bp [break_at marker1 " line $bp_location15"]
 
 gdb_test "ignore $bp 10" \
     "Will ignore next 10 crossings of breakpoint \[0-9\]*.*" \
diff --git a/gdb/testsuite/gdb.base/hbreak2.exp b/gdb/testsuite/gdb.base/hbreak2.exp
index 42049e5..7e77eb9 100644
--- a/gdb/testsuite/gdb.base/hbreak2.exp
+++ b/gdb/testsuite/gdb.base/hbreak2.exp
@@ -96,7 +96,7 @@  set bp_location1 [gdb_get_line_number "set breakpoint 1 here"]
 # board.  So, to be sure, we do a list command.
 #
 gdb_test "list main" \
-    ".*main \\(argc, argv, envp\\).*" \
+    ".*main \\(int argc, char ..argv, char ..envp\\).*" \
     "use `list' to establish default source file"
 gdb_test "hbreak $bp_location1" \
     "Hardware assisted breakpoint.*at.* file .*$srcfile, line $bp_location1\\." \
@@ -141,7 +141,6 @@  if {$hp_aCC_compiler} {
 
 set bp_location7 [gdb_get_line_number "set breakpoint 7 here"]
 set bp_location8 [gdb_get_line_number "set breakpoint 8 here" $srcfile1]
-set bp_location9 [gdb_get_line_number "set breakpoint 9 here" $srcfile1]
 
 gdb_test "info break" \
     "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
@@ -192,7 +191,7 @@  gdb_test "hbreak \"marker2\"" \
     "Hardware assisted breakpoint.*at.* file .*$srcfile1, line.*" \
     "hardware breakpoint quoted function (2)"
 gdb_test "continue" \
-    "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile1:($bp_location8|$bp_location9).*" \
+    "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile1:$bp_location8.*" \
     "run until quoted breakpoint"
 delete_breakpoints
 #
@@ -394,7 +393,7 @@  gdb_test "hbreak \$foo" \
 # Verify that we can set and trigger a breakpoint in a user-called function.
 #
 gdb_test "hbreak marker2" \
-    "Hardware assisted breakpoint (\[0-9\]*) at .*, line ($bp_location8|$bp_location9).*" \
+    "Hardware assisted breakpoint (\[0-9\]*) at .*, line $bp_location8.*" \
     "set hardware breakpoint on to-be-called function"
 
 gdb_test "print marker2(99)" \
@@ -408,10 +407,10 @@  gdb_test "print marker2(99)" \
 # for hppa*-*-hpux.
 #
 gdb_test_multiple "bt" "backtrace while in called function" {
-    -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*_sr4export.*$gdb_prompt $" {
+    -re "#0\[ \t\]*($hex in )?marker2.*:$bp_location8\r\n#1.*_sr4export.*$gdb_prompt $" {
 	pass "backtrace while in called function"
     }
-    -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*function called from gdb.*$gdb_prompt $" {
+    -re "#0\[ \t\]*($hex in )?marker2.*:$bp_location8\r\n#1.*function called from gdb.*$gdb_prompt $" {
 	pass "backtrace while in called function"
     }
 }
@@ -421,13 +420,13 @@  gdb_test_multiple "bt" "backtrace while in called function" {
 # breakpoint inserted by GDB at the program's entry point.
 #
 gdb_test_multiple "finish" "finish from called function" {
-    -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.* in _sr4export.*$gdb_prompt $" {
+    -re "Run till exit from .*marker2.* at .*$bp_location8\r\n.* in _sr4export.*$gdb_prompt $" {
 	pass "finish from called function"
     }
-    -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*function called from gdb.*$gdb_prompt $" {
+    -re "Run till exit from .*marker2.* at .*$bp_location8\r\n.*function called from gdb.*$gdb_prompt $" {
 	pass "finish from called function"
     }
-    -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*Value returned.*$gdb_prompt $" {
+    -re "Run till exit from .*marker2.* at .*$bp_location8\r\n.*Value returned.*$gdb_prompt $" {
 	pass "finish from called function"
     }
 }
@@ -577,19 +576,11 @@  gdb_test "hbreak marker4" \
 # has no exactly matching line symbol, and GDB reports the breakpoint
 # as if it were in the middle of a line rather than at the beginning.
 
-set bp_location13 [gdb_get_line_number "set breakpoint 13 here" $srcfile1]
 set bp_location14 [gdb_get_line_number "set breakpoint 14 here" $srcfile1]
 
 gdb_test_multiple "continue" \
     "run until hardware breakpoint set at small function, optimized file" {
-	-re "Breakpoint $decimal, marker4 \\(d=(d@entry=)?177601976\\) at .*$srcfile1:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" {
-	    pass "run until hardware breakpoint set at small function, optimized file"
-	}
-	-re "Breakpoint $decimal, $hex in marker4 \\(d=(d@entry=)?177601976\\) at .*$srcfile1:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" {
-	    pass "run until hardware breakpoint set at small function, optimized file"
-	}
 	-re "Breakpoint $decimal, marker4 \\(d=(d@entry=)?177601976\\) at .*$srcfile1:$bp_location14\[\r\n\]+$bp_location14\[\t \]+void marker4.*" {
-	    # marker4() is defined at line 46 when compiled with -DPROTOTYPES
 	    pass "run until hardware breakpoint set at small function, optimized file (line bp_location14)"
 	}
 	-re "Breakpoint $decimal, factorial \\(.*\\) .*\{\r\n$gdb_prompt" {
diff --git a/gdb/testsuite/gdb.reverse/until-precsave.exp b/gdb/testsuite/gdb.reverse/until-precsave.exp
index db643fa..b8a74ae 100644
--- a/gdb/testsuite/gdb.reverse/until-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/until-precsave.exp
@@ -31,7 +31,7 @@  if { [prepare_for_testing $testfile.exp $testfile \
 
 set bp_location1  [gdb_get_line_number "set breakpoint 1 here"]
 set bp_location7  [gdb_get_line_number "set breakpoint 7 here"]
-set bp_location9  [gdb_get_line_number "set breakpoint 9 here" "$srcfile2"]
+set bp_location8  [gdb_get_line_number "set breakpoint 8 here" "$srcfile2"]
 set bp_location19 [gdb_get_line_number "set breakpoint 19 here"]
 set bp_location20 [gdb_get_line_number "set breakpoint 20 here"]
 set bp_location21 [gdb_get_line_number "set breakpoint 21 here"]
@@ -102,7 +102,7 @@  gdb_test "finish" \
 # Advance to a function called by main (marker2)
 #
 gdb_test "advance marker2" \
-    "marker2 .a=43.*$srcfile2:$bp_location9.*" \
+    "marker2 .a=43.*$srcfile2:$bp_location8.*" \
     "advance to marker2"
 
 # Now issue an until with another function, not called by the current
@@ -133,7 +133,7 @@  gdb_test_no_output "set exec-dir reverse" "set reverse execution"
 #
 
 gdb_test "advance marker2" \
-    "marker2 .a=43.*$srcfile2:$bp_location9.*" \
+    "marker2 .a=43.*$srcfile2:$bp_location8.*" \
     "reverse-advance to marker2"
 
 # Finish out to main scope (backward)
diff --git a/gdb/testsuite/gdb.reverse/until-reverse.exp b/gdb/testsuite/gdb.reverse/until-reverse.exp
index b6c3e54..389d892 100644
--- a/gdb/testsuite/gdb.reverse/until-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/until-reverse.exp
@@ -29,7 +29,7 @@  if { [prepare_for_testing $testfile.exp $testfile \
 
 set bp_location1  [gdb_get_line_number "set breakpoint 1 here"]
 set bp_location7  [gdb_get_line_number "set breakpoint 7 here"]
-set bp_location9  [gdb_get_line_number "set breakpoint 9 here" "$srcfile2"]
+set bp_location8  [gdb_get_line_number "set breakpoint 8 here" "$srcfile2"]
 set bp_location19 [gdb_get_line_number "set breakpoint 19 here"]
 set bp_location20 [gdb_get_line_number "set breakpoint 20 here"]
 set bp_location21 [gdb_get_line_number "set breakpoint 21 here"]
@@ -70,7 +70,7 @@  gdb_test "finish" \
 # Advance to a function called by main (marker2)
 #
 gdb_test "advance marker2" \
-    "marker2 .a=43.*$srcfile2:$bp_location9.*" \
+    "marker2 .a=43.*$srcfile2:$bp_location8.*" \
     "advance to marker2"
 
 # Now issue an until with another function, not called by the current
@@ -101,7 +101,7 @@  gdb_test_no_output "set exec-dir reverse" "set reverse execution"
 #
 
 gdb_test "advance marker2" \
-    "marker2 .a=43.*$srcfile2:$bp_location9.*" \
+    "marker2 .a=43.*$srcfile2:$bp_location8.*" \
     "reverse-advance to marker2"
 
 # Finish out to main scope (backward)