[v3] LoongArch: Fixed a compilation failure with '%c' in inline assembly [PR107731].

  There is description of '%c' "%n" "%a" and "%l" in section 17.5 of gccint.pdf.
So I can understand that these descriptors are the ones that the common code
implementation back end has to support, right?
But I don't see the use of these descriptors in gcc.pdf.Now I want to add the
descriptor information under loongarch. I had to add '%c' to the schema section.
Is there a better solution to this?


V2 -> v3:
1. Correct a clerical error.
2. Adding document for loongarch operand modifiers.

---

Co-authored-by: Yang Yujie <yangyujie@loongson.cn>

gcc/ChangeLog:

	* config/loongarch/loongarch.cc (loongarch_classify_address):
	Add precessint for CONST_INT.
	(loongarch_print_operand_reloc): Operand modifier 'c' is supported.
	(loongarch_print_operand): Increase the processing of '%c'.
	* doc/extend.texi: Adds documents for LoongArch operand modifiers.

gcc/testsuite/ChangeLog:

	* gcc.target/loongarch/tst-asm-const.c: Moved to...
	* gcc.target/loongarch/pr107731.c: ...here.
---
 gcc/config/loongarch/loongarch.cc                | 14 ++++++++++++++
 gcc/doc/extend.texi                              | 16 ++++++++++++++++
 .../loongarch/{tst-asm-const.c => pr107731.c}    |  6 +++---
 3 files changed, 33 insertions(+), 3 deletions(-)
 rename gcc/testsuite/gcc.target/loongarch/{tst-asm-const.c => pr107731.c} (78%)
  

Lulu Cheng <chenglulu@loongson.cn> writes:
> There is description of '%c' "%n" "%a" and "%l" in section 17.5 of gccint.pdf.
> So I can understand that these descriptors are the ones that the common code
> implementation back end has to support, right?
> But I don't see the use of these descriptors in gcc.pdf.Now I want to add the
> descriptor information under loongarch. I had to add '%c' to the schema section.
> Is there a better solution to this?

It looks right to me FWIW.  I agree it seems odd that %c, %n, %a and %l
aren't mentioned in the user-facing documentation, given that md.texi
implies that all targets must support them.  Looks like the user
documentation just says "Typically these qualifiers are hardware 
dependent.", without hinting what the 4 atypical cases are.

Thanks,
Richard

>
>
> V2 -> v3:
> 1. Correct a clerical error.
> 2. Adding document for loongarch operand modifiers.
>
> ---
>
> Co-authored-by: Yang Yujie <yangyujie@loongson.cn>
>
> gcc/ChangeLog:
>
> 	* config/loongarch/loongarch.cc (loongarch_classify_address):
> 	Add precessint for CONST_INT.
> 	(loongarch_print_operand_reloc): Operand modifier 'c' is supported.
> 	(loongarch_print_operand): Increase the processing of '%c'.
> 	* doc/extend.texi: Adds documents for LoongArch operand modifiers.
>
> gcc/testsuite/ChangeLog:
>
> 	* gcc.target/loongarch/tst-asm-const.c: Moved to...
> 	* gcc.target/loongarch/pr107731.c: ...here.
> ---
>  gcc/config/loongarch/loongarch.cc                | 14 ++++++++++++++
>  gcc/doc/extend.texi                              | 16 ++++++++++++++++
>  .../loongarch/{tst-asm-const.c => pr107731.c}    |  6 +++---
>  3 files changed, 33 insertions(+), 3 deletions(-)
>  rename gcc/testsuite/gcc.target/loongarch/{tst-asm-const.c => pr107731.c} (78%)
>
> diff --git a/gcc/config/loongarch/loongarch.cc b/gcc/config/loongarch/loongarch.cc
> index c6b03fcf2f9..cdf190b985e 100644
> --- a/gcc/config/loongarch/loongarch.cc
> +++ b/gcc/config/loongarch/loongarch.cc
> @@ -2075,6 +2075,11 @@ loongarch_classify_address (struct loongarch_address_info *info, rtx x,
>        return (loongarch_valid_base_register_p (info->reg, mode, strict_p)
>  	      && loongarch_valid_lo_sum_p (info->symbol_type, mode,
>  					   info->offset));
> +    case CONST_INT:
> +      /* Small-integer addresses don't occur very often, but they
> +	 are legitimate if $r0 is a valid base register.  */
> +      info->type = ADDRESS_CONST_INT;
> +      return IMM12_OPERAND (INTVAL (x));
>  
>      default:
>        return false;
> @@ -4933,6 +4938,7 @@ loongarch_print_operand_reloc (FILE *file, rtx op, bool hi64_part,
>  
>     'A'	Print a _DB suffix if the memory model requires a release.
>     'b'	Print the address of a memory operand, without offset.
> +   'c'  Print an integer.
>     'C'	Print the integer branch condition for comparison OP.
>     'd'	Print CONST_INT OP in decimal.
>     'F'	Print the FPU branch condition for comparison OP.
> @@ -4979,6 +4985,14 @@ loongarch_print_operand (FILE *file, rtx op, int letter)
>         fputs ("_db", file);
>        break;
>  
> +    case 'c':
> +      if (CONST_INT_P (op))
> +	fprintf (file, HOST_WIDE_INT_PRINT_DEC, INTVAL (op));
> +      else
> +	output_operand_lossage ("unsupported operand for code '%c'", letter);
> +
> +      break;
> +
>      case 'C':
>        loongarch_print_int_branch_condition (file, code, letter);
>        break;
> diff --git a/gcc/doc/extend.texi b/gcc/doc/extend.texi
> index b1dd39e64b8..5a8b9489f3d 100644
> --- a/gcc/doc/extend.texi
> +++ b/gcc/doc/extend.texi
> @@ -11374,6 +11374,22 @@ constant.  Used to select the specified bit position.
>  @item @code{x} @tab Equivialent to @code{X}, but only for pointers.
>  @end multitable
>  
> +@anchor{loongarchOperandmodifiers}
> +@subsubsection LoongArch Operand Modifiers
> +
> +The list below describes the supported modifiers and their effects for LoongArch.
> +
> +@multitable @columnfractions .10 .90
> +@headitem Modifier @tab Description
> +@item @code{c} @tab Print a constant integer operand in decimal.
> +@item @code{d} @tab Same as @code{c}.
> +@item @code{i} @tab Print the character ''@code{i}'' if the operand is not a register.
> +@item @code{m} @tab Same as @code{c}, but the printed value is @code{operand - 1}.
> +@item @code{X} @tab Print a constant integer operand in hexadecimal.
> +@item @code{z} @tab Print the operand in its unmodified form, followed by a comma.
> +@end multitable
> +
> +
>  @lowersections
>  @include md.texi
>  @raisesections
> diff --git a/gcc/testsuite/gcc.target/loongarch/tst-asm-const.c b/gcc/testsuite/gcc.target/loongarch/pr107731.c
> similarity index 78%
> rename from gcc/testsuite/gcc.target/loongarch/tst-asm-const.c
> rename to gcc/testsuite/gcc.target/loongarch/pr107731.c
> index 2e04b99e301..80d84c48c6e 100644
> --- a/gcc/testsuite/gcc.target/loongarch/tst-asm-const.c
> +++ b/gcc/testsuite/gcc.target/loongarch/pr107731.c
> @@ -1,13 +1,13 @@
> -/* Test asm const. */
>  /* { dg-do compile } */
>  /* { dg-final { scan-assembler-times "foo:.*\\.long 1061109567.*\\.long 52" 1 } } */
> +
>  int foo ()
>  {
>    __asm__ volatile (
>            "foo:"
>            "\n\t"
> -	  ".long %a0\n\t"
> -	  ".long %a1\n\t"
> +	  ".long %c0\n\t"
> +	  ".long %c1\n\t"
>  	  :
>  	  :"i"(0x3f3f3f3f), "i"(52)
>  	  :