[2/4] libstdc++: Adjust build of PCH files accounting configured host support.
Commit Message
This takes account of the overall configuration for host PCH support
when deciding if we should build the libstdc++ PCH files.
We now require both the support is configured and that we are hosted.
A non-fatal configure warning is given if the user attempts to
--disable-host-pch-support --enable-libstdcxx-pch since the latter
conflicts with the former (but does not prevent a useable libstdc++
library build).
Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
libstdc++-v3/ChangeLog:
* acinclude.m4: Account for configured host PCH support.
* configure: Regenerate.
* configure.ac: Act on --enable-host-pch-support.
---
libstdc++-v3/acinclude.m4 | 49 ++++++++++++++++-----------
libstdc++-v3/configure | 71 ++++++++++++++++++++++++++-------------
libstdc++-v3/configure.ac | 11 ++++--
3 files changed, 86 insertions(+), 45 deletions(-)
Comments
On Thu, 4 Nov 2021 at 21:04, Iain Sandoe wrote:
> Well, I did try to CC it to this list ..
>
> > Begin forwarded message:
> >
> > From: Iain Sandoe via Gcc-patches <gcc-patches@gcc.gnu.org>
> > Subject: [PATCH 2/4] libstdc++: Adjust build of PCH files accounting
> configured host support.
> > Date: 4 November 2021 at 20:02:16 GMT
> > To: gcc-patches@gcc.gnu.org
> > Cc: Iain Sandoe <iains.gcc@gmail.com>
> > Reply-To: iain@sandoe.co.uk
> >
> > This takes account of the overall configuration for host PCH support
> > when deciding if we should build the libstdc++ PCH files.
> >
> > We now require both the support is configured and that we are hosted.
> > A non-fatal configure warning is given if the user attempts to
> > --disable-host-pch-support --enable-libstdcxx-pch since the latter
> > conflicts with the former (but does not prevent a useable libstdc++
> > library build).
>
This looks OK for trunk.
> >
> > Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
> >
> > libstdc++-v3/ChangeLog:
> >
> > * acinclude.m4: Account for configured host PCH support.
> > * configure: Regenerate.
> > * configure.ac: Act on --enable-host-pch-support.
> > ---
> > libstdc++-v3/acinclude.m4 | 49 ++++++++++++++++-----------
> > libstdc++-v3/configure | 71 ++++++++++++++++++++++++++-------------
> > libstdc++-v3/configure.ac | 11 ++++--
> > 3 files changed, 86 insertions(+), 45 deletions(-)
> >
> > diff --git a/libstdc++-v3/acinclude.m4 b/libstdc++-v3/acinclude.m4
> > index 90ecc4a87a2..87652306691 100644
> > --- a/libstdc++-v3/acinclude.m4
> > +++ b/libstdc++-v3/acinclude.m4
> > @@ -3225,7 +3225,7 @@ AC_DEFUN([GLIBCXX_ENABLE_WCHAR_T], [
> > ])
> >
> >
> > -dnl
> > +≈
> > dnl Check to see if building and using a C++ precompiled header can be
> done.
> > dnl
> > dnl --enable-libstdcxx-pch=yes
> > @@ -3240,29 +3240,40 @@ dnl Substs:
> > dnl glibcxx_PCHFLAGS
> > dnl
> > AC_DEFUN([GLIBCXX_ENABLE_PCH], [
> > - GLIBCXX_ENABLE(libstdcxx-pch,$1,,[build pre-compiled libstdc++
> headers])
> > + dnl This is only allowed if host support is enabled, and we are
> hosted.
> > + if test "$1" = "yes" && test "$2" = "yes"; then
> > + can_pch=yes
> > + else
> > + can_pch=no
> > + fi
> > + GLIBCXX_ENABLE(libstdcxx-pch,$can_pch,,[build pre-compiled libstdc++
> headers])
> > if test $enable_libstdcxx_pch = yes; then
> > - AC_CACHE_CHECK([for compiler with PCH support],
> > - [glibcxx_cv_prog_CXX_pch],
> > - [ac_save_CXXFLAGS="$CXXFLAGS"
> > - CXXFLAGS="$CXXFLAGS -Werror -Winvalid-pch -Wno-deprecated"
> > - AC_LANG_SAVE
> > - AC_LANG_CPLUSPLUS
> > - echo '#include <math.h>' > conftest.h
> > - if $CXX $CXXFLAGS $CPPFLAGS -x c++-header conftest.h \
> > + if test "$2" != "yes"; then
> > + glibcxx_cv_prog_CXX_pch=no
> > + AC_MSG_WARN([PCH headers cannot be built since host PCH is
> disabled])
> > + else
> > + AC_CACHE_CHECK([for compiler with PCH support],
> > + [glibcxx_cv_prog_CXX_pch],
> > + [ac_save_CXXFLAGS="$CXXFLAGS"
> > + CXXFLAGS="$CXXFLAGS -Werror -Winvalid-pch -Wno-deprecated"
> > + AC_LANG_SAVE
> > + AC_LANG_CPLUSPLUS
> > + echo '#include <math.h>' > conftest.h
> > + if $CXX $CXXFLAGS $CPPFLAGS -x c++-header conftest.h \
> > -o conftest.h.gch 1>&5 2>&1 &&
> > echo '#error "pch failed"' > conftest.h &&
> > echo '#include "conftest.h"' > conftest.cc &&
> > $CXX -c $CXXFLAGS $CPPFLAGS conftest.cc 1>&5 2>&1 ;
> > - then
> > - glibcxx_cv_prog_CXX_pch=yes
> > - else
> > - glibcxx_cv_prog_CXX_pch=no
> > - fi
> > - rm -f conftest*
> > - CXXFLAGS=$ac_save_CXXFLAGS
> > - AC_LANG_RESTORE
> > - ])
> > + then
> > + glibcxx_cv_prog_CXX_pch=yes
> > + else
> > + glibcxx_cv_prog_CXX_pch=no
> > + fi
> > + rm -f conftest*
> > + CXXFLAGS=$ac_save_CXXFLAGS
> > + AC_LANG_RESTORE
> > + ])
> > + fi
> > enable_libstdcxx_pch=$glibcxx_cv_prog_CXX_pch
> > fi
> >
> >
> > diff --git a/libstdc++-v3/configure.ac b/libstdc++-v3/configure.ac
> > index 2d68b3672b9..ce82f16c859 100644
> > --- a/libstdc++-v3/configure.ac
> > +++ b/libstdc++-v3/configure.ac
> > @@ -103,7 +103,6 @@ if test "$enable_vtable_verify" = yes; then
> > postdep_objects_CXX="${postdep_objects_CXX}
> ${glibcxx_builddir}/../libgcc/vtv_end.o"
> > fi
> >
> > -
> > # libtool variables for C++ shared and position-independent compiles.
> > #
> > # Use glibcxx_lt_pic_flag to designate the automake variable
> > @@ -147,8 +146,16 @@ GLIBCXX_ENABLE_HOSTED
> > # Enable descriptive messages to standard output on termination.
> > GLIBCXX_ENABLE_VERBOSE
> >
> > +# The current default is that PCH is supported by the host unless
> otherwise
> > +# stated.
> > +AC_ARG_ENABLE(host_pch_support,
> > +AS_HELP_STRING([--disable-host-pch-support],
> > + [Disable host support for precompiled headers]),
> > +host_pch_support=$enableval,
> > +host_pch_support=yes)
> > +
> > # Enable compiler support that doesn't require linking.
> > -GLIBCXX_ENABLE_PCH($is_hosted)
> > +GLIBCXX_ENABLE_PCH($is_hosted, $host_pch_support)
> > GLIBCXX_ENABLE_THREADS
> > GLIBCXX_ENABLE_ATOMIC_BUILTINS
> > GLIBCXX_ENABLE_LOCK_POLICY
> > --
> > 2.24.3 (Apple Git-128)
> >
>
>
@@ -3225,7 +3225,7 @@ AC_DEFUN([GLIBCXX_ENABLE_WCHAR_T], [
])
-dnl
+≈
dnl Check to see if building and using a C++ precompiled header can be done.
dnl
dnl --enable-libstdcxx-pch=yes
@@ -3240,29 +3240,40 @@ dnl Substs:
dnl glibcxx_PCHFLAGS
dnl
AC_DEFUN([GLIBCXX_ENABLE_PCH], [
- GLIBCXX_ENABLE(libstdcxx-pch,$1,,[build pre-compiled libstdc++ headers])
+ dnl This is only allowed if host support is enabled, and we are hosted.
+ if test "$1" = "yes" && test "$2" = "yes"; then
+ can_pch=yes
+ else
+ can_pch=no
+ fi
+ GLIBCXX_ENABLE(libstdcxx-pch,$can_pch,,[build pre-compiled libstdc++ headers])
if test $enable_libstdcxx_pch = yes; then
- AC_CACHE_CHECK([for compiler with PCH support],
- [glibcxx_cv_prog_CXX_pch],
- [ac_save_CXXFLAGS="$CXXFLAGS"
- CXXFLAGS="$CXXFLAGS -Werror -Winvalid-pch -Wno-deprecated"
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- echo '#include <math.h>' > conftest.h
- if $CXX $CXXFLAGS $CPPFLAGS -x c++-header conftest.h \
+ if test "$2" != "yes"; then
+ glibcxx_cv_prog_CXX_pch=no
+ AC_MSG_WARN([PCH headers cannot be built since host PCH is disabled])
+ else
+ AC_CACHE_CHECK([for compiler with PCH support],
+ [glibcxx_cv_prog_CXX_pch],
+ [ac_save_CXXFLAGS="$CXXFLAGS"
+ CXXFLAGS="$CXXFLAGS -Werror -Winvalid-pch -Wno-deprecated"
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ echo '#include <math.h>' > conftest.h
+ if $CXX $CXXFLAGS $CPPFLAGS -x c++-header conftest.h \
-o conftest.h.gch 1>&5 2>&1 &&
echo '#error "pch failed"' > conftest.h &&
echo '#include "conftest.h"' > conftest.cc &&
$CXX -c $CXXFLAGS $CPPFLAGS conftest.cc 1>&5 2>&1 ;
- then
- glibcxx_cv_prog_CXX_pch=yes
- else
- glibcxx_cv_prog_CXX_pch=no
- fi
- rm -f conftest*
- CXXFLAGS=$ac_save_CXXFLAGS
- AC_LANG_RESTORE
- ])
+ then
+ glibcxx_cv_prog_CXX_pch=yes
+ else
+ glibcxx_cv_prog_CXX_pch=no
+ fi
+ rm -f conftest*
+ CXXFLAGS=$ac_save_CXXFLAGS
+ AC_LANG_RESTORE
+ ])
+ fi
enable_libstdcxx_pch=$glibcxx_cv_prog_CXX_pch
fi
@@ -103,7 +103,6 @@ if test "$enable_vtable_verify" = yes; then
postdep_objects_CXX="${postdep_objects_CXX} ${glibcxx_builddir}/../libgcc/vtv_end.o"
fi
-
# libtool variables for C++ shared and position-independent compiles.
#
# Use glibcxx_lt_pic_flag to designate the automake variable
@@ -147,8 +146,16 @@ GLIBCXX_ENABLE_HOSTED
# Enable descriptive messages to standard output on termination.
GLIBCXX_ENABLE_VERBOSE
+# The current default is that PCH is supported by the host unless otherwise
+# stated.
+AC_ARG_ENABLE(host_pch_support,
+AS_HELP_STRING([--disable-host-pch-support],
+ [Disable host support for precompiled headers]),
+host_pch_support=$enableval,
+host_pch_support=yes)
+
# Enable compiler support that doesn't require linking.
-GLIBCXX_ENABLE_PCH($is_hosted)
+GLIBCXX_ENABLE_PCH($is_hosted, $host_pch_support)
GLIBCXX_ENABLE_THREADS
GLIBCXX_ENABLE_ATOMIC_BUILTINS
GLIBCXX_ENABLE_LOCK_POLICY