@@ -1166,9 +1166,6 @@ ifeq ($(strip $(filter-out powerpc% wrs vxworks vxworksspe vxworks7% vxworks7spe
s-vxwext.ads<libgnarl/s-vxwext__kernel.ads \
s-vxwext.adb<libgnarl/s-vxwext__kernel.adb \
system.ads<libgnat/$(SVX)-$(ARCH_STR)-kernel.ads
- else
- LIBGNAT_TARGET_PAIRS += \
- system.ads<libgnat/system-vxworks-ppc.ads
endif
endif
EXTRA_GNATRTL_NONTASKING_OBJS+=i-vxinco.o i-vxwork.o i-vxwoio.o
@@ -1315,9 +1312,6 @@ ifeq ($(strip $(filter-out %86 x86_64 wrs vxworks vxworks7%,$(target_cpu) $(targ
s-vxwext.ads<libgnarl/s-vxwext__kernel.ads \
s-vxwext.adb<libgnarl/s-vxwext__kernel.adb \
system.ads<libgnat/$(SVX)-x86-kernel.ads
- else
- LIBGNAT_TARGET_PAIRS += \
- system.ads<libgnat/system-vxworks-x86.ads
endif
endif
deleted file mode 100644
@@ -1,185 +0,0 @@
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-
-
-pragma Restrictions (No_Exception_Propagation);
-
-pragma Restrictions (No_Exception_Registration);
-
-pragma Restrictions (No_Implicit_Dynamic_Code);
-
-pragma Restrictions (No_Finalization);
-
-pragma Profile (Ravenscar);
-
-pragma Discard_Names;
-
-package System is
- pragma Pure;
- -- Note that we take advantage of the implementation permission to make
- -- this unit Pure instead of Preelaborable; see RM 13.7.1(15). In Ada
- -- 2005, this is Pure in any case (AI-362).
-
- pragma No_Elaboration_Code_All;
- -- Allow the use of that restriction in units that WITH this unit
-
- type Name is (SYSTEM_NAME_GNAT);
- System_Name : constant Name := SYSTEM_NAME_GNAT;
-
- -- System-Dependent Named Numbers
-
- Min_Int : constant := -2 ** (Standard'Max_Integer_Size - 1);
- Max_Int : constant := 2 ** (Standard'Max_Integer_Size - 1) - 1;
-
- Max_Binary_Modulus : constant := 2 ** Standard'Max_Integer_Size;
- Max_Nonbinary_Modulus : constant := 2 ** Integer'Size - 1;
-
- Max_Base_Digits : constant := Long_Long_Float'Digits;
- Max_Digits : constant := Long_Long_Float'Digits;
-
- Max_Mantissa : constant := Standard'Max_Integer_Size - 1;
- Fine_Delta : constant := 2.0 ** (-Max_Mantissa);
-
- Tick : constant := 1.0 / 60.0;
-
- -- Storage-related Declarations
-
- type Address is private;
- pragma Preelaborable_Initialization (Address);
- Null_Address : constant Address;
-
- Storage_Unit : constant := 8;
- Word_Size : constant := 32;
- Memory_Size : constant := 2 ** 32;
-
- -- Address comparison
-
- function "<" (Left, Right : Address) return Boolean;
- function "<=" (Left, Right : Address) return Boolean;
- function ">" (Left, Right : Address) return Boolean;
- function ">=" (Left, Right : Address) return Boolean;
- function "=" (Left, Right : Address) return Boolean;
-
- pragma Import (Intrinsic, "<");
- pragma Import (Intrinsic, "<=");
- pragma Import (Intrinsic, ">");
- pragma Import (Intrinsic, ">=");
- pragma Import (Intrinsic, "=");
-
- -- Other System-Dependent Declarations
-
- type Bit_Order is (High_Order_First, Low_Order_First);
- Default_Bit_Order : constant Bit_Order := High_Order_First;
- pragma Warnings (Off, Default_Bit_Order); -- kill constant condition warning
-
- -- Priority-related Declarations (RM D.1)
-
- -- Ada priorities are mapped to VxWorks priorities using the following
- -- transformation: 255 - Ada Priority
-
- -- Ada priorities are used as follows:
-
- -- 256 is reserved for the VxWorks kernel
- -- 248 - 255 correspond to hardware interrupt levels 0 .. 7
- -- 247 is a catchall default "interrupt" priority for signals,
- -- allowing higher priority than normal tasks, but lower than
- -- hardware priority levels. Protected Object ceilings can
- -- override these values.
- -- 246 is used by the Interrupt_Manager task
-
- Max_Priority : constant Positive := 245;
- Max_Interrupt_Priority : constant Positive := 255;
-
- subtype Any_Priority is Integer range 0 .. 255;
- subtype Priority is Any_Priority range 0 .. 245;
- subtype Interrupt_Priority is Any_Priority range 246 .. 255;
-
- Default_Priority : constant Priority := 122;
-
-private
-
- type Address is mod Memory_Size;
- Null_Address : constant Address := 0;
-
- --------------------------------------
- -- System Implementation Parameters --
- --------------------------------------
-
- -- These parameters provide information about the target that is used
- -- by the compiler. They are in the private part of System, where they
- -- can be accessed using the special circuitry in the Targparm unit
- -- whose source should be consulted for more detailed descriptions
- -- of the individual switch values.
-
- Backend_Divide_Checks : constant Boolean := False;
- Backend_Overflow_Checks : constant Boolean := True;
- Command_Line_Args : constant Boolean := False;
- Configurable_Run_Time : constant Boolean := True;
- Denorm : constant Boolean := True;
- Duration_32_Bits : constant Boolean := True;
- Exit_Status_Supported : constant Boolean := True;
- Machine_Overflows : constant Boolean := True;
- Machine_Rounds : constant Boolean := True;
- Preallocated_Stacks : constant Boolean := False;
- Signed_Zeros : constant Boolean := True;
- Stack_Check_Default : constant Boolean := False;
- Stack_Check_Probes : constant Boolean := False;
- Stack_Check_Limits : constant Boolean := True;
- Support_Aggregates : constant Boolean := True;
- Support_Composite_Assign : constant Boolean := True;
- Support_Composite_Compare : constant Boolean := True;
- Support_Long_Shifts : constant Boolean := True;
- Always_Compatible_Rep : constant Boolean := True;
- Suppress_Standard_Library : constant Boolean := True;
- Use_Ada_Main_Program_Name : constant Boolean := True;
- Frontend_Exceptions : constant Boolean := True;
- ZCX_By_Default : constant Boolean := False;
-
- Executable_Extension : constant String := ".out";
-
-end System;
deleted file mode 100644
@@ -1,163 +0,0 @@
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-
-package System is
- pragma Pure;
- -- Note that we take advantage of the implementation permission to make
- -- this unit Pure instead of Preelaborable; see RM 13.7.1(15). In Ada
- -- 2005, this is Pure in any case (AI-362).
-
- pragma No_Elaboration_Code_All;
- -- Allow the use of that restriction in units that WITH this unit
-
- type Name is (SYSTEM_NAME_GNAT);
- System_Name : constant Name := SYSTEM_NAME_GNAT;
-
- -- System-Dependent Named Numbers
-
- Min_Int : constant := -2 ** (Standard'Max_Integer_Size - 1);
- Max_Int : constant := 2 ** (Standard'Max_Integer_Size - 1) - 1;
-
- Max_Binary_Modulus : constant := 2 ** Standard'Max_Integer_Size;
- Max_Nonbinary_Modulus : constant := 2 ** Integer'Size - 1;
-
- Max_Base_Digits : constant := Long_Long_Float'Digits;
- Max_Digits : constant := Long_Long_Float'Digits;
-
- Max_Mantissa : constant := Standard'Max_Integer_Size - 1;
- Fine_Delta : constant := 2.0 ** (-Max_Mantissa);
-
- Tick : constant := 1.0 / 60.0;
-
- -- Storage-related Declarations
-
- type Address is private;
- pragma Preelaborable_Initialization (Address);
- Null_Address : constant Address;
-
- Storage_Unit : constant := 8;
- Word_Size : constant := 32;
- Memory_Size : constant := 2 ** 32;
-
- -- Address comparison
-
- function "<" (Left, Right : Address) return Boolean;
- function "<=" (Left, Right : Address) return Boolean;
- function ">" (Left, Right : Address) return Boolean;
- function ">=" (Left, Right : Address) return Boolean;
- function "=" (Left, Right : Address) return Boolean;
-
- pragma Import (Intrinsic, "<");
- pragma Import (Intrinsic, "<=");
- pragma Import (Intrinsic, ">");
- pragma Import (Intrinsic, ">=");
- pragma Import (Intrinsic, "=");
-
- -- Other System-Dependent Declarations
-
- type Bit_Order is (High_Order_First, Low_Order_First);
- Default_Bit_Order : constant Bit_Order := High_Order_First;
- pragma Warnings (Off, Default_Bit_Order); -- kill constant condition warning
-
- -- Priority-related Declarations (RM D.1)
-
- -- Ada priorities are mapped to VxWorks priorities using the following
- -- transformation: 255 - Ada Priority
-
- -- Ada priorities are used as follows:
-
- -- 256 is reserved for the VxWorks kernel
- -- 248 - 255 correspond to hardware interrupt levels 0 .. 7
- -- 247 is a catchall default "interrupt" priority for signals,
- -- allowing higher priority than normal tasks, but lower than
- -- hardware priority levels. Protected Object ceilings can
- -- override these values.
- -- 246 is used by the Interrupt_Manager task
-
- Max_Priority : constant Positive := 245;
- Max_Interrupt_Priority : constant Positive := 255;
-
- subtype Any_Priority is Integer range 0 .. 255;
- subtype Priority is Any_Priority range 0 .. 245;
- subtype Interrupt_Priority is Any_Priority range 246 .. 255;
-
- Default_Priority : constant Priority := 122;
-
-private
-
- pragma Linker_Options ("--specs=vxworks-ppc-link.spec");
- -- Setup proper set of -L's for this configuration
-
- type Address is mod Memory_Size;
- Null_Address : constant Address := 0;
-
- --------------------------------------
- -- System Implementation Parameters --
- --------------------------------------
-
- -- These parameters provide information about the target that is used
- -- by the compiler. They are in the private part of System, where they
- -- can be accessed using the special circuitry in the Targparm unit
- -- whose source should be consulted for more detailed descriptions
- -- of the individual switch values.
-
- Backend_Divide_Checks : constant Boolean := False;
- Backend_Overflow_Checks : constant Boolean := True;
- Command_Line_Args : constant Boolean := False;
- Configurable_Run_Time : constant Boolean := False;
- Denorm : constant Boolean := True;
- Duration_32_Bits : constant Boolean := False;
- Exit_Status_Supported : constant Boolean := True;
- Machine_Overflows : constant Boolean := False;
- Machine_Rounds : constant Boolean := True;
- Preallocated_Stacks : constant Boolean := False;
- Signed_Zeros : constant Boolean := True;
- Stack_Check_Default : constant Boolean := False;
- Stack_Check_Probes : constant Boolean := False;
- Stack_Check_Limits : constant Boolean := True;
- Support_Aggregates : constant Boolean := True;
- Support_Composite_Assign : constant Boolean := True;
- Support_Composite_Compare : constant Boolean := True;
- Support_Long_Shifts : constant Boolean := True;
- Always_Compatible_Rep : constant Boolean := False;
- Suppress_Standard_Library : constant Boolean := False;
- Use_Ada_Main_Program_Name : constant Boolean := True;
- Frontend_Exceptions : constant Boolean := True;
- ZCX_By_Default : constant Boolean := False;
-
- Executable_Extension : constant String := ".out";
-
-end System;
deleted file mode 100644
@@ -1,164 +0,0 @@
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-
-package System is
- pragma Pure;
- -- Note that we take advantage of the implementation permission to make
- -- this unit Pure instead of Preelaborable; see RM 13.7.1(15). In Ada
- -- 2005, this is Pure in any case (AI-362).
-
- pragma No_Elaboration_Code_All;
- -- Allow the use of that restriction in units that WITH this unit
-
- type Name is (SYSTEM_NAME_GNAT);
- System_Name : constant Name := SYSTEM_NAME_GNAT;
-
- -- System-Dependent Named Numbers
-
- Min_Int : constant := -2 ** (Standard'Max_Integer_Size - 1);
- Max_Int : constant := 2 ** (Standard'Max_Integer_Size - 1) - 1;
-
- Max_Binary_Modulus : constant := 2 ** Standard'Max_Integer_Size;
- Max_Nonbinary_Modulus : constant := 2 ** Integer'Size - 1;
-
- Max_Base_Digits : constant := Long_Long_Float'Digits;
- Max_Digits : constant := Long_Long_Float'Digits;
-
- Max_Mantissa : constant := Standard'Max_Integer_Size - 1;
- Fine_Delta : constant := 2.0 ** (-Max_Mantissa);
-
- Tick : constant := 1.0 / 60.0;
-
- -- Storage-related Declarations
-
- type Address is private;
- pragma Preelaborable_Initialization (Address);
- Null_Address : constant Address;
-
- Storage_Unit : constant := 8;
- Word_Size : constant := 32;
- Memory_Size : constant := 2 ** 32;
-
- -- Address comparison
-
- function "<" (Left, Right : Address) return Boolean;
- function "<=" (Left, Right : Address) return Boolean;
- function ">" (Left, Right : Address) return Boolean;
- function ">=" (Left, Right : Address) return Boolean;
- function "=" (Left, Right : Address) return Boolean;
-
- pragma Import (Intrinsic, "<");
- pragma Import (Intrinsic, "<=");
- pragma Import (Intrinsic, ">");
- pragma Import (Intrinsic, ">=");
- pragma Import (Intrinsic, "=");
-
- -- Other System-Dependent Declarations
-
- type Bit_Order is (High_Order_First, Low_Order_First);
- Default_Bit_Order : constant Bit_Order := Low_Order_First;
- pragma Warnings (Off, Default_Bit_Order); -- kill constant condition warning
-
- -- Priority-related Declarations (RM D.1)
-
- -- Ada priorities are mapped to VxWorks priorities using the following
- -- transformation: 255 - Ada Priority
-
- -- Ada priorities are used as follows:
-
- -- 256 is reserved for the VxWorks kernel
- -- 248 - 255 correspond to hardware interrupt levels 0 .. 7
- -- 247 is a catchall default "interrupt" priority for signals,
- -- allowing higher priority than normal tasks, but lower than
- -- hardware priority levels. Protected Object ceilings can
- -- override these values.
- -- 246 is used by the Interrupt_Manager task
-
- Max_Priority : constant Positive := 245;
- Max_Interrupt_Priority : constant Positive := 255;
-
- subtype Any_Priority is Integer range 0 .. 255;
- subtype Priority is Any_Priority range 0 .. 245;
- subtype Interrupt_Priority is Any_Priority range 246 .. 255;
-
- Default_Priority : constant Priority := 122;
-
-private
-
- pragma Linker_Options ("--specs=vxworks-x86-link.spec");
- -- Setup proper set of -L's for this configuration
-
- type Address is mod Memory_Size;
- Null_Address : constant Address := 0;
-
- --------------------------------------
- -- System Implementation Parameters --
- --------------------------------------
-
- -- These parameters provide information about the target that is used
- -- by the compiler. They are in the private part of System, where they
- -- can be accessed using the special circuitry in the Targparm unit
- -- whose source should be consulted for more detailed descriptions
- -- of the individual switch values.
-
- Backend_Divide_Checks : constant Boolean := False;
- Backend_Overflow_Checks : constant Boolean := True;
- Command_Line_Args : constant Boolean := False;
- Configurable_Run_Time : constant Boolean := False;
- Denorm : constant Boolean := True;
- Duration_32_Bits : constant Boolean := False;
- Exit_Status_Supported : constant Boolean := True;
- Machine_Overflows : constant Boolean := False;
- Machine_Rounds : constant Boolean := True;
- Preallocated_Stacks : constant Boolean := False;
- Signed_Zeros : constant Boolean := True;
- Stack_Check_Default : constant Boolean := False;
- Stack_Check_Probes : constant Boolean := False;
- Stack_Check_Limits : constant Boolean := True;
- Support_Aggregates : constant Boolean := True;
- Support_Atomic_Primitives : constant Boolean := True;
- Support_Composite_Assign : constant Boolean := True;
- Support_Composite_Compare : constant Boolean := True;
- Support_Long_Shifts : constant Boolean := True;
- Always_Compatible_Rep : constant Boolean := False;
- Suppress_Standard_Library : constant Boolean := False;
- Use_Ada_Main_Program_Name : constant Boolean := True;
- Frontend_Exceptions : constant Boolean := True;
- ZCX_By_Default : constant Boolean := False;
-
- Executable_Extension : constant String := ".out";
-
-end System;