@@ -1,3 +1,13 @@
+2015-04-22 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * cli/cli-dump.c (verilog_cmdlist): New variable.
+ (dump_verilog_memory): New function.
+ (dump_verilog_value): New function.
+ (verilog_dump_command): New function.
+ (_initialize_cli_dump): Add new commands to support verilog dump
+ format.
+ * NEWS: Add entry for "dump verilog".
+
2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (handle_output_debug_string): Don't change
@@ -42,6 +42,8 @@
(no "set sysroot" or "file" commands are required). See "New remote
packets" below.
+* The "dump" command now supports verilog hex format.
+
* Python Scripting
** gdb.Objfile objects have a new attribute "username",
@@ -150,6 +150,7 @@ static struct cmd_list_element *dump_cmdlist;
static struct cmd_list_element *append_cmdlist;
static struct cmd_list_element *srec_cmdlist;
static struct cmd_list_element *ihex_cmdlist;
+static struct cmd_list_element *verilog_cmdlist;
static struct cmd_list_element *tekhex_cmdlist;
static struct cmd_list_element *binary_dump_cmdlist;
static struct cmd_list_element *binary_append_cmdlist;
@@ -335,6 +336,18 @@ dump_ihex_value (char *args, int from_tty)
}
static void
+dump_verilog_memory (char *args, int from_tty)
+{
+ dump_memory_to_file (args, FOPEN_WB, "verilog");
+}
+
+static void
+dump_verilog_value (char *args, int from_tty)
+{
+ dump_value_to_file (args, FOPEN_WB, "verilog");
+}
+
+static void
dump_tekhex_memory (char *args, int from_tty)
{
dump_memory_to_file (args, FOPEN_WB, "tekhex");
@@ -636,6 +649,13 @@ ihex_dump_command (char *cmd, int from_tty)
}
static void
+verilog_dump_command (char *cmd, int from_tty)
+{
+ printf_unfiltered (_("\"dump verilog\" must be followed by a subcommand.\n"));
+ help_list (verilog_cmdlist, "dump verilog ", all_commands, gdb_stdout);
+}
+
+static void
tekhex_dump_command (char *cmd, int from_tty)
{
printf_unfiltered ("\"dump tekhex\" must be followed by a subcommand.\n");
@@ -697,6 +717,12 @@ the specified FILE in raw target ordered bytes.");
0 /*allow-unknown*/,
&dump_cmdlist);
+ add_prefix_cmd ("verilog", all_commands, verilog_dump_command,
+ _("Write target code/data to a verilog hex file."),
+ &verilog_cmdlist, "dump verilog ",
+ 0 /*allow-unknown*/,
+ &dump_cmdlist);
+
add_prefix_cmd ("tekhex", all_commands, tekhex_dump_command,
_("Write target code/data to a tekhex file."),
&tekhex_cmdlist, "dump tekhex ",
@@ -739,6 +765,18 @@ Arguments are FILE EXPRESSION. Writes the value of EXPRESSION\n\
to the specified FILE in intel hex format."),
&ihex_cmdlist);
+ add_cmd ("memory", all_commands, dump_verilog_memory, _("\
+Write contents of memory to a verilog hex file.\n\
+Arguments are FILE START STOP. Writes the contents of memory within\n\
+the range [START .. STOP) to the specified FILE in verilog hex format."),
+ &verilog_cmdlist);
+
+ add_cmd ("value", all_commands, dump_verilog_value, _("\
+Write the value of an expression to a verilog hex file.\n\
+Arguments are FILE EXPRESSION. Writes the value of EXPRESSION\n\
+to the specified FILE in verilog hex format."),
+ &verilog_cmdlist);
+
add_cmd ("memory", all_commands, dump_tekhex_memory, _("\
Write contents of memory to a tekhex file.\n\
Arguments are FILE START STOP. Writes the contents of memory\n\
@@ -1,3 +1,8 @@
+2015-04-22 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * gdb.texinfo (Dump/Restore Files): Add detail about verilog dump
+ format.
+
2015-04-17 Gary Benson <gbenson@redhat.com>
* gdb.texinfo (Connecting to a Remote Target): Mention that
@@ -10868,9 +10868,9 @@ You can use the commands @code{dump}, @code{append}, and
@code{restore} to copy data between target memory and a file. The
@code{dump} and @code{append} commands write data to a file, and the
@code{restore} command reads data from a file back into the inferior's
-memory. Files may be in binary, Motorola S-record, Intel hex, or
-Tektronix Hex format; however, @value{GDBN} can only append to binary
-files.
+memory. Files may be in binary, Motorola S-record, Intel hex,
+Tektronix Hex, or Verilog Hex format; however, @value{GDBN} can only
+append to binary files, and cannot read from Verilog Hex files.
@table @code
@@ -10890,6 +10890,8 @@ Intel hex format.
Motorola S-record format.
@item tekhex
Tektronix Hex format.
+@item verilog
+Verilog Hex format.
@end table
@value{GDBN} uses the same definitions of these formats as the
@@ -1,3 +1,8 @@
+2015-04-22 Andrew Burgess <andrew.burgess@embecosm.com>
+
+ * gdb.base/dump.exp: Add *.verilog files to all_files list. Add
+ new tests for verilog output.
+
2015-04-21 Pierre Muller <muller@sourceware.org>
PR pascal/17815
@@ -66,10 +66,14 @@ if {${data_address} > ${max_32bit_address}} then {
set filenames {}
set all_files {
intarr1.bin intarr1b.bin intarr1.ihex
- intarr1.srec intarr1.tekhex intarr2.bin intarr2b.bin intarr2.ihex
- intarr2.srec intarr2.tekhex intstr1.bin intstr1b.bin intstr1.ihex
- intstr1.srec intstr1.tekhex intstr2.bin intstr2b.bin intstr2.ihex
- intstr2.srec intstr2.tekhex intarr3.srec
+ intarr1.srec intarr1.tekhex intarr1.verilog
+ intarr2.bin intarr2b.bin intarr2.ihex
+ intarr2.srec intarr2.tekhex intarr2.verilog
+ intstr1.bin intstr1b.bin intstr1.ihex
+ intstr1.srec intstr1.tekhex intstr1.verilog
+ intstr2.bin intstr2b.bin intstr2.ihex
+ intstr2.srec intstr2.tekhex intstr2.verilog
+ intarr3.srec
}
# This loop sets variables dynamically -- each name listed in
@@ -147,6 +151,12 @@ make_dump_file "dump tekhex val [set intarr1.tekhex] intarray" \
make_dump_file "dump tekhex val [set intstr1.tekhex] intstruct" \
"dump struct as value, tekhex"
+make_dump_file "dump verilog val [set intarr1.verilog] intarray" \
+ "dump array as value, intel hex"
+
+make_dump_file "dump verilog val [set intstr1.verilog] intstruct" \
+ "dump struct as value, intel hex"
+
proc capture_value { expression args } {
global gdb_prompt
global expect_out
@@ -242,6 +252,12 @@ make_dump_file "dump tekhex mem [set intarr2.tekhex] $array_start $array_end" \
make_dump_file "dump tekhex mem [set intstr2.tekhex] $struct_start $struct_end" \
"dump struct as memory, tekhex"
+make_dump_file "dump verilog mem [set intarr2.verilog] $array_start $array_end" \
+ "dump array as memory, verilog"
+
+make_dump_file "dump verilog mem [set intstr2.verilog] $struct_start $struct_end" \
+ "dump struct as memory, verilog"
+
# test complex expressions
make_dump_file \
"dump srec mem [set intarr3.srec] &intarray \(char *\) &intarray + sizeof intarray" \