diff mbox

[1/2] aarch64,falkor: Ignore prefetcher hints for memmove tail

Message ID 20180503175209.2943-2-siddhesh@sourceware.org
State Committed
Headers

Commit Message

Siddhesh Poyarekar May 3, 2018, 5:52 p.m. UTC 
  The tail of the copy loops are unable to train the falkor hardware
prefetcher because they load from a different base compared to the hot
loop.  In this case avoid serializing the instructions by loading them
into different registers.  Also peel the last iteration of the loop
into the tail (and have them use different registers) since it gives
better performance for medium sizes.

This results in performance improvements of between 3% and 20% over
the current falkor implementation for sizes between 128 bytes and 1K
on the memmove-walk benchmark, thus mostly covering the regressions
seen against the generic memmove.

	* sysdeps/aarch64/multiarch/memmove_falkor.S
	(__memmove_falkor): Use multiple registers to move data in
	loop tail.
---
 sysdeps/aarch64/multiarch/memmove_falkor.S | 48 ++++++++++++++++++------------
 1 file changed, 29 insertions(+), 19 deletions(-)

Comments

Szabolcs Nagy May 10, 2018, 10:29 a.m. UTC | #1 
On 03/05/18 18:52, Siddhesh Poyarekar wrote:
> The tail of the copy loops are unable to train the falkor hardware
> prefetcher because they load from a different base compared to the hot
> loop.  In this case avoid serializing the instructions by loading them
> into different registers.  Also peel the last iteration of the loop
> into the tail (and have them use different registers) since it gives
> better performance for medium sizes.
> 
> This results in performance improvements of between 3% and 20% over
> the current falkor implementation for sizes between 128 bytes and 1K
> on the memmove-walk benchmark, thus mostly covering the regressions
> seen against the generic memmove.
> 
> 	* sysdeps/aarch64/multiarch/memmove_falkor.S
> 	(__memmove_falkor): Use multiple registers to move data in
> 	loop tail.

OK to commit.
diff mbox

Patch

diff --git a/sysdeps/aarch64/multiarch/memmove_falkor.S b/sysdeps/aarch64/multiarch/memmove_falkor.S
index 3375adf2de..c0d9560301 100644
--- a/sysdeps/aarch64/multiarch/memmove_falkor.S
+++ b/sysdeps/aarch64/multiarch/memmove_falkor.S
@@ -150,7 +150,6 @@  L(copy96):
 
 	.p2align 4
 L(copy_long):
-	sub	count, count, 64 + 16	/* Test and readjust count.  */
 	mov	B_l, Q_l
 	mov	B_h, Q_h
 	ldp	A_l, A_h, [src]
@@ -161,6 +160,8 @@  L(copy_long):
 	ldp	Q_l, Q_h, [src, 16]!
 	stp	A_l, A_h, [dstin]
 	ldp	A_l, A_h, [src, 16]!
+	subs	count, count, 32 + 64 + 16	/* Test and readjust count.  */
+	b.ls	L(last64)
 
 L(loop64):
 	subs	count, count, 32
@@ -170,18 +171,22 @@  L(loop64):
 	ldp	A_l, A_h, [src, 16]!
 	b.hi	L(loop64)
 
-	/* Write the last full set of 32 bytes.  The remainder is at most 32
-	   bytes, so it is safe to always copy 32 bytes from the end even if
-	   there is just 1 byte left.  */
+	/* Write the last full set of 64 bytes.  The remainder is at most 64
+	   bytes and at least 33 bytes, so it is safe to always copy 64 bytes
+	   from the end.  */
 L(last64):
-	ldp	C_l, C_h, [srcend, -32]
+	ldp	C_l, C_h, [srcend, -64]
 	stp	Q_l, Q_h, [dst, 16]
-	ldp	Q_l, Q_h, [srcend, -16]
+	mov	Q_l, B_l
+	mov	Q_h, B_h
+	ldp	B_l, B_h, [srcend, -48]
 	stp	A_l, A_h, [dst, 32]
-	stp	C_l, C_h, [dstend, -32]
-	stp	Q_l, Q_h, [dstend, -16]
-	mov	Q_l, B_l
-	mov	Q_h, B_h
+	ldp	A_l, A_h, [srcend, -32]
+	ldp	D_l, D_h, [srcend, -16]
+	stp	C_l, C_h, [dstend, -64]
+	stp	B_l, B_h, [dstend, -48]
+	stp	A_l, A_h, [dstend, -32]
+	stp	D_l, D_h, [dstend, -16]
 	ret
 
 	.p2align 4
@@ -204,7 +209,8 @@  L(move_long):
 	sub	count, count, tmp1
 	ldp	A_l, A_h, [srcend, -16]!
 	sub	dstend, dstend, tmp1
-	sub	count, count, 64
+	subs	count, count, 32 + 64
+	b.ls	2f
 
 1:
 	subs	count, count, 32
@@ -214,18 +220,22 @@  L(move_long):
 	ldp	A_l, A_h, [srcend, -16]!
 	b.hi	1b
 
-	/* Write the last full set of 32 bytes.  The remainder is at most 32
-	   bytes, so it is safe to always copy 32 bytes from the start even if
-	   there is just 1 byte left.  */
+	/* Write the last full set of 64 bytes.  The remainder is at most 64
+	   bytes and at least 33 bytes, so it is safe to always copy 64 bytes
+	   from the start.  */
 2:
-	ldp	C_l, C_h, [src, 16]
+	ldp	C_l, C_h, [src, 48]
 	stp	Q_l, Q_h, [dstend, -16]
-	ldp	Q_l, Q_h, [src]
-	stp	A_l, A_h, [dstend, -32]
-	stp	C_l, C_h, [dstin, 16]
-	stp	Q_l, Q_h, [dstin]
 	mov	Q_l, B_l
 	mov	Q_h, B_h
+	ldp	B_l, B_h, [src, 32]
+	stp	A_l, A_h, [dstend, -32]
+	ldp	A_l, A_h, [src, 16]
+	ldp	D_l, D_h, [src]
+	stp	C_l, C_h, [dstin, 48]
+	stp	B_l, B_h, [dstin, 32]
+	stp	A_l, A_h, [dstin, 16]
+	stp	D_l, D_h, [dstin]
 3:	ret
 
 END (__memmove_falkor)