diff --git a/Makeconfig b/Makeconfig
index 901e253..4eb9f23 100644
--- a/Makeconfig
+++ b/Makeconfig
@@ -1096,7 +1096,7 @@ all-subdirs = csu assert ctype locale intl catgets math setjmp signal	    \
 	      grp pwd posix io termios resource misc socket sysvipc gmon    \
 	      gnulib iconv iconvdata wctype manual shadow gshadow po argp   \
 	      crypt localedata timezone rt conform debug mathvec	    \
-	      $(add-on-subdirs) dlfcn elf
+	      $(add-on-subdirs) dlfcn elf pretty-printers
 
 ifndef avoid-generated
 # sysd-sorted itself will contain rules making the sysd-sorted target
diff --git a/Makerules b/Makerules
index 53eabfa..56c9a07 100644
--- a/Makerules
+++ b/Makerules
@@ -190,6 +190,50 @@ sed-remove-dotdot := -e 's@  *\([^ 	\/$$][^ 	\]*\)@ $$(..)\1@g' \
 		     -e 's@^\([^ 	\/$$][^ 	\]*\)@$$(..)\1@g'
 endif
 
+ifdef gen-py-const-headers
+# We'll use a static pattern rule to match .pysym files with their
+# corresponding generated .py files.
+# The generated .py files go in the submodule's dir in the glibc source dir.
+py-const-files := $(patsubst %.pysym,%.py,$(gen-py-const-headers))
+py-const-dir := $(subdir)
+py-const := $(py-const-files)
+py-const-script := $(..)scripts/gen-py-const.awk
+
+# This is a hack we use to generate .py files with constants for Python
+# pretty printers.  It works the same way as gen-as-const.
+# See scripts/gen-py-const.awk for details on how the awk | gcc mechanism
+# works.
+#
+# $@.tmp and $@.tmp2 are temporary files we use to store the partial contents
+# of the target file.  We do this instead of just writing on $@ because, if the
+# build process terminates prematurely, re-running Make wouldn't run this rule
+# since Make would see that the target file already exists (despite it being
+# incomplete).
+#
+# The sed line replaces "@name@SOME_NAME@value@SOME_VALUE@" strings from the
+# output of 'gcc -S' with "SOME_NAME = SOME_VALUE" strings.
+# The '-n' option, combined with the '/p' command, makes sed output only the
+# modified lines instead of the whole input file.  The output is redirected
+# to a .py file; we'll import it in the pretty printers file to read
+# the constants generated by gen-py-const.awk.
+# The regex has two capturing groups, for SOME_NAME and SOME_VALUE
+# respectively.  Notice SOME_VALUE may be prepended by a special character,
+# depending on the assembly syntax (e.g. immediates are prefixed by a '$'
+# in AT&T x86, and by a '#' in ARM).  We discard it using a complemented set
+# before the second capturing group.
+$(py-const): %.py: %.pysym $(py-const-script) $(common-before-compile)
+	$(AWK) -f $(py-const-script) $< \
+		| $(CC) -S -o $@.tmp $(CFLAGS) $(CPPFLAGS) -x c -
+	echo '# GENERATED FILE\n' > $@.tmp2
+	echo '# Constant definitions for pretty printers.' >> $@.tmp2
+	echo '# See gen-py-const.awk for details.\n' >> $@.tmp2
+	sed -n -r 's/^.*@name@([^@]+)@value@[^[:xdigit:]Xx-]*([[:xdigit:]Xx-]+)@.*/\1 = \2/p' \
+		  $@.tmp >> $@.tmp2
+	mv -f $@.tmp2 $@
+	rm -f $@.tmp
+
+generated += $(py-const)
+endif  # gen-py-const-headers
 
 ifdef gen-as-const-headers
 # Generating headers for assembly constants.
diff --git a/Rules b/Rules
index 8306d36..cd3e764 100644
--- a/Rules
+++ b/Rules
@@ -98,6 +98,11 @@ tests: $(tests:%=$(objpfx)%.out) $(tests-special)
 xtests: tests $(xtests:%=$(objpfx)%.out) $(xtests-special)
 endif
 
+# Generate constant files for Python pretty printers if required.
+ifdef py-const
+others: $(py-const)
+endif
+
 tests-special-notdir = $(patsubst $(objpfx)%, %, $(tests-special))
 xtests-special-notdir = $(patsubst $(objpfx)%, %, $(xtests-special))
 tests:
diff --git a/nptl/Makefile b/nptl/Makefile
index eaa6f7f..82ad67f 100644
--- a/nptl/Makefile
+++ b/nptl/Makefile
@@ -306,6 +306,7 @@ gen-as-const-headers = pthread-errnos.sym \
 		       unwindbuf.sym \
 		       lowlevelrobustlock.sym pthread-pi-defines.sym
 
+gen-py-const-headers = nptl_lock_constants.pysym
 
 LDFLAGS-pthread.so = -Wl,--enable-new-dtags,-z,nodelete,-z,initfirst
 
diff --git a/nptl/nptl-printers.py b/nptl/nptl-printers.py
new file mode 100644
index 0000000..f64216f
--- /dev/null
+++ b/nptl/nptl-printers.py
@@ -0,0 +1,593 @@
+# Pretty printers for the NPTL lock types.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+"""This file contains the gdb pretty printers for the following types:
+
+    * pthread_mutex_t
+    * pthread_mutexattr_t
+    * pthread_cond_t
+    * pthread_condattr_t
+    * pthread_rwlock_t
+    * pthread_rwlockattr_t
+
+You can check which printers are registered and enabled by issuing the
+'info pretty-printer' gdb command.  Printers should trigger automatically when
+trying to print a variable of one of the types mentioned above.
+"""
+
+from __future__ import print_function
+
+import gdb
+from nptl_lock_constants import *
+
+MUTEX_TYPES = {
+    PTHREAD_MUTEX_NORMAL: ('Type', 'Normal'),
+    PTHREAD_MUTEX_RECURSIVE: ('Type', 'Recursive'),
+    PTHREAD_MUTEX_ERRORCHECK: ('Type', 'Error check'),
+    PTHREAD_MUTEX_ADAPTIVE_NP: ('Type', 'Adaptive')
+}
+
+class MutexPrinter(object):
+    """Pretty printer for pthread_mutex_t."""
+
+    def __init__(self, mutex):
+        """Initialize the printer's internal data structures.
+
+        Args:
+            mutex: A gdb.value representing a pthread_mutex_t.
+        """
+
+        data = mutex['__data']
+        self.lock = data['__lock']
+        self.count = data['__count']
+        self.owner = data['__owner']
+        self.kind = data['__kind']
+        self.values = []
+        self.read_values()
+
+    def to_string(self):
+        """gdb API function.
+
+        This is called from gdb when we try to print a pthread_mutex_t.
+        """
+
+        return 'pthread_mutex_t'
+
+    def children(self):
+        """gdb API function.
+
+        This is called from gdb when we try to print a pthread_mutex_t.
+        """
+
+        return self.values
+
+    def read_values(self):
+        """Read the mutex's info and store it in self.values.
+
+        The data contained in self.values will be returned by the Iterator
+        created in self.children.
+        """
+
+        self.read_type()
+        self.read_status()
+        self.read_attributes()
+        self.read_misc_info()
+
+    def read_type(self):
+        """Read the mutex's type."""
+
+        mutex_type = self.kind & PTHREAD_MUTEX_KIND_MASK
+
+        # mutex_type must be casted to int because it's a gdb.Value
+        self.values.append(MUTEX_TYPES[int(mutex_type)])
+
+    def read_status(self):
+        """Read the mutex's status.
+
+        For architectures which support lock elision, this method reads
+        whether the mutex appears as locked in memory (i.e. it may show it as
+        unlocked even after calling pthread_mutex_lock).
+        """
+
+        if self.kind == PTHREAD_MUTEX_DESTROYED:
+            self.values.append(('Status', 'Destroyed'))
+        elif self.kind & PTHREAD_MUTEX_ROBUST_NORMAL_NP:
+            self.read_status_robust()
+        else:
+            self.read_status_no_robust()
+
+    def read_status_robust(self):
+        """Read the status of a robust mutex.
+
+        In glibc robust mutexes are implemented in a very different way than
+        non-robust ones.  This method reads their locking status,
+        whether it may have waiters, their registered owner (if any),
+        whether the owner is alive or not, and the status of the state
+        they're protecting.
+        """
+
+        if self.lock == PTHREAD_MUTEX_UNLOCKED:
+            self.values.append(('Status', 'Unlocked'))
+        else:
+            if self.lock & FUTEX_WAITERS:
+                self.values.append(('Status', 'Locked, possibly with waiters'))
+            else:
+                self.values.append(('Status',
+                                    'Locked, possibly with no waiters'))
+
+            if self.lock & FUTEX_OWNER_DIED:
+                self.values.append(('Owner ID', '%d (dead)' % self.owner))
+            else:
+                self.values.append(('Owner ID', self.lock & FUTEX_TID_MASK))
+
+        if self.owner == PTHREAD_MUTEX_INCONSISTENT:
+            self.values.append(('State protected by this mutex',
+                                'Inconsistent'))
+        elif self.owner == PTHREAD_MUTEX_NOTRECOVERABLE:
+            self.values.append(('State protected by this mutex',
+                                'Not recoverable'))
+
+    def read_status_no_robust(self):
+        """Read the status of a non-robust mutex.
+
+        Read info on whether the mutex is locked, if it may have waiters
+        and its owner (if any).
+        """
+
+        lock_value = self.lock
+
+        if self.kind & PTHREAD_MUTEX_PRIO_PROTECT_NP:
+            lock_value &= ~(PTHREAD_MUTEX_PRIO_CEILING_MASK)
+
+        if lock_value == PTHREAD_MUTEX_UNLOCKED:
+            self.values.append(('Status', 'Unlocked'))
+        else:
+            if self.kind & PTHREAD_MUTEX_PRIO_INHERIT_NP:
+                waiters = self.lock & FUTEX_WAITERS
+                owner = self.lock & FUTEX_TID_MASK
+            else:
+                # Mutex protocol is PP or none
+                waiters = (self.lock != PTHREAD_MUTEX_LOCKED_NO_WAITERS)
+                owner = self.owner
+
+            if waiters:
+                self.values.append(('Status', 'Locked, possibly with waiters'))
+            else:
+                self.values.append(('Status',
+                                    'Locked, possibly with no waiters'))
+
+            self.values.append(('Owner ID', owner))
+
+    def read_attributes(self):
+        """Read the mutex's attributes."""
+
+        if self.kind != PTHREAD_MUTEX_DESTROYED:
+            if self.kind & PTHREAD_MUTEX_ROBUST_NORMAL_NP:
+                self.values.append(('Robust', 'Yes'))
+            else:
+                self.values.append(('Robust', 'No'))
+
+            # In glibc, robust mutexes always have their pshared flag set to
+            # 'shared' regardless of what the pshared flag of their
+            # mutexattr was.  Therefore a robust mutex will act as shared
+            # even if it was initialized with a 'private' mutexattr.
+            if self.kind & PTHREAD_MUTEX_PSHARED_BIT:
+                self.values.append(('Shared', 'Yes'))
+            else:
+                self.values.append(('Shared', 'No'))
+
+            if self.kind & PTHREAD_MUTEX_PRIO_INHERIT_NP:
+                self.values.append(('Protocol', 'Priority inherit'))
+            elif self.kind & PTHREAD_MUTEX_PRIO_PROTECT_NP:
+                prio_ceiling = ((self.lock & PTHREAD_MUTEX_PRIO_CEILING_MASK)
+                                >> PTHREAD_MUTEX_PRIO_CEILING_SHIFT)
+
+                self.values.append(('Protocol', 'Priority protect'))
+                self.values.append(('Priority ceiling', prio_ceiling))
+            else:
+                # PTHREAD_PRIO_NONE
+                self.values.append(('Protocol', 'None'))
+
+    def read_misc_info(self):
+        """Read miscellaneous info on the mutex.
+
+        For now this reads the number of times a recursive mutex was locked
+        by the same thread.
+        """
+
+        mutex_type = self.kind & PTHREAD_MUTEX_KIND_MASK
+
+        if mutex_type == PTHREAD_MUTEX_RECURSIVE and self.count > 1:
+            self.values.append(('Times locked recursively', self.count))
+
+class MutexAttributesPrinter(object):
+    """Pretty printer for pthread_mutexattr_t.
+
+    In the NPTL this is a type that's always casted to struct pthread_mutexattr
+    which has a single 'mutexkind' field containing the actual attributes.
+    """
+
+    def __init__(self, mutexattr):
+        """Initialize the printer's internal data structures.
+
+        Args:
+            mutexattr: A gdb.value representing a pthread_mutexattr_t.
+        """
+
+        mutexattr_struct = gdb.lookup_type('struct pthread_mutexattr')
+        self.mutexattr = mutexattr.cast(mutexattr_struct)['mutexkind']
+        self.values = []
+        self.read_values()
+
+    def to_string(self):
+        """gdb API function.
+
+        This is called from gdb when we try to print a pthread_mutexattr_t.
+        """
+
+        return 'pthread_mutexattr_t'
+
+    def children(self):
+        """gdb API function.
+
+        This is called from gdb when we try to print a pthread_mutexattr_t.
+        """
+
+        return self.values
+
+    def read_values(self):
+        """Read the mutexattr's info and store it in self.values.
+
+        The data contained in self.values will be returned by the Iterator
+        created in self.children.
+        """
+
+        mutexattr_type = (self.mutexattr
+                          & ~PTHREAD_MUTEXATTR_FLAG_BITS
+                          & ~PTHREAD_MUTEX_NO_ELISION_NP)
+
+        # mutexattr_type must be casted to int because it's a gdb.Value
+        self.values.append(MUTEX_TYPES[int(mutexattr_type)])
+
+        if self.mutexattr & PTHREAD_MUTEXATTR_FLAG_ROBUST:
+            self.values.append(('Robust', 'Yes'))
+        else:
+            self.values.append(('Robust', 'No'))
+
+        if self.mutexattr & PTHREAD_MUTEXATTR_FLAG_PSHARED:
+            self.values.append(('Shared', 'Yes'))
+        else:
+            self.values.append(('Shared', 'No'))
+
+        protocol = ((self.mutexattr & PTHREAD_MUTEXATTR_PROTOCOL_MASK) >>
+                    PTHREAD_MUTEXATTR_PROTOCOL_SHIFT)
+
+        if protocol == PTHREAD_PRIO_NONE:
+            self.values.append(('Protocol', 'None'))
+        elif protocol == PTHREAD_PRIO_INHERIT:
+            self.values.append(('Protocol', 'Priority inherit'))
+        elif protocol == PTHREAD_PRIO_PROTECT:
+            self.values.append(('Protocol', 'Priority protect'))
+
+CLOCK_IDS = {
+    CLOCK_REALTIME: 'CLOCK_REALTIME',
+    CLOCK_MONOTONIC: 'CLOCK_MONOTONIC',
+    CLOCK_PROCESS_CPUTIME_ID: 'CLOCK_PROCESS_CPUTIME_ID',
+    CLOCK_THREAD_CPUTIME_ID: 'CLOCK_THREAD_CPUTIME_ID',
+    CLOCK_MONOTONIC_RAW: 'CLOCK_MONOTONIC_RAW',
+    CLOCK_REALTIME_COARSE: 'CLOCK_REALTIME_COARSE',
+    CLOCK_MONOTONIC_COARSE: 'CLOCK_MONOTONIC_COARSE'
+}
+
+class ConditionVariablePrinter(object):
+    """Pretty printer for pthread_cond_t."""
+
+    def __init__(self, cond):
+        """Initialize the printer's internal data structures.
+
+        Args:
+            cond: A gdb.value representing a pthread_cond_t.
+        """
+
+        data = cond['__data']
+        self.total_seq = data['__total_seq']
+        self.mutex = data['__mutex']
+        self.nwaiters = data['__nwaiters']
+        self.values = []
+        self.read_values()
+
+    def to_string(self):
+        """gdb API function.
+
+        This is called from gdb when we try to print a pthread_cond_t.
+        """
+
+        return 'pthread_cond_t'
+
+    def children(self):
+        """gdb API function.
+
+        This is called from gdb when we try to print a pthread_cond_t.
+        """
+
+        return self.values
+
+    def read_values(self):
+        """Read the condvar's info and store it in self.values.
+
+        The data contained in self.values will be returned by the Iterator
+        created in self.children.
+        """
+
+        self.read_status()
+        self.read_attributes()
+        self.read_mutex_info()
+
+    def read_status(self):
+        """Read the status of the condvar.
+
+        This method reads whether the condvar is destroyed and how many threads
+        are waiting for it.
+        """
+
+        if self.total_seq == PTHREAD_COND_DESTROYED:
+            self.values.append(('Status', 'Destroyed'))
+
+        self.values.append(('Threads waiting for this condvar',
+                            self.nwaiters >> COND_NWAITERS_SHIFT))
+
+    def read_attributes(self):
+        """Read the condvar's attributes."""
+
+        clock_id = self.nwaiters & ((1 << COND_NWAITERS_SHIFT) - 1)
+
+        # clock_id must be casted to int because it's a gdb.Value
+        self.values.append(('Clock ID', CLOCK_IDS[int(clock_id)]))
+
+        shared = (self.mutex == PTHREAD_COND_SHARED)
+
+        if shared:
+            self.values.append(('Shared', 'Yes'))
+        else:
+            self.values.append(('Shared', 'No'))
+
+    def read_mutex_info(self):
+        """Read the data of the mutex this condvar is bound to.
+
+        A pthread_cond_t's __data.__mutex member is a void * which
+        must be casted to pthread_mutex_t *.  For shared condvars, this
+        member isn't recorded and has a value of ~0l instead.
+        """
+
+        if self.mutex and self.mutex != PTHREAD_COND_SHARED:
+            mutex_type = gdb.lookup_type('pthread_mutex_t')
+            mutex = self.mutex.cast(mutex_type.pointer()).dereference()
+
+            self.values.append(('Mutex', mutex))
+
+class ConditionVariableAttributesPrinter(object):
+    """Pretty printer for pthread_condattr_t.
+
+    In the NPTL this is a type that's always casted to struct pthread_condattr,
+    which has a single 'value' field containing the actual attributes.
+    """
+
+    def __init__(self, condattr):
+        """Initialize the printer's internal data structures.
+
+        Args:
+            condattr: A gdb.value representing a pthread_condattr_t.
+        """
+
+        condattr_struct = gdb.lookup_type('struct pthread_condattr')
+        self.condattr = condattr.cast(condattr_struct)['value']
+        self.values = []
+        self.read_values()
+
+    def to_string(self):
+        """gdb API function.
+
+        This is called from gdb when we try to print a pthread_condattr_t.
+        """
+
+        return 'pthread_condattr_t'
+
+    def children(self):
+        """gdb API function.
+
+        This is called from gdb when we try to print a pthread_condattr_t.
+        """
+
+        return self.values
+
+    def read_values(self):
+        """Read the condattr's info and store it in self.values.
+
+        The data contained in self.values will be returned by the Iterator
+        created in self.children.
+        """
+
+        clock_id = self.condattr & ((1 << COND_NWAITERS_SHIFT) - 1)
+
+        # clock_id must be casted to int because it's a gdb.Value
+        self.values.append(('Clock ID', CLOCK_IDS[int(clock_id)]))
+
+        if self.condattr & 1:
+            self.values.append(('Shared', 'Yes'))
+        else:
+            self.values.append(('Shared', 'No'))
+
+class RWLockPrinter(object):
+    """Pretty printer for pthread_rwlock_t."""
+
+    def __init__(self, rwlock):
+        """Initialize the printer's internal data structures.
+
+        Args:
+            rwlock: A gdb.value representing a pthread_rwlock_t.
+        """
+
+        data = rwlock['__data']
+        self.readers = data['__nr_readers']
+        self.queued_readers = data['__nr_readers_queued']
+        self.queued_writers = data['__nr_writers_queued']
+        self.writer_id = data['__writer']
+        self.shared = data['__shared']
+        self.prefers_writers = data['__flags']
+        self.values = []
+        self.read_values()
+
+    def to_string(self):
+        """gdb API function.
+
+        This is called from gdb when we try to print a pthread_rwlock_t.
+        """
+
+        return 'pthread_rwlock_t'
+
+    def children(self):
+        """gdb API function.
+
+        This is called from gdb when we try to print a pthread_rwlock_t.
+        """
+
+        return self.values
+
+    def read_values(self):
+        """Read the rwlock's info and store it in self.values.
+
+        The data contained in self.values will be returned by the Iterator
+        created in self.children.
+        """
+
+        self.read_status()
+        self.read_attributes()
+
+    def read_status(self):
+        """Read the status of the rwlock."""
+
+        # Right now pthread_rwlock_destroy doesn't do anything, so there's no
+        # way to check if an rwlock is destroyed.
+
+        if self.writer_id:
+            self.values.append(('Status', 'Locked (Write)'))
+            self.values.append(('Writer ID', self.writer_id))
+        elif self.readers:
+            self.values.append(('Status', 'Locked (Read)'))
+            self.values.append(('Readers', self.readers))
+        else:
+            self.values.append(('Status', 'Unlocked'))
+
+        self.values.append(('Queued readers', self.queued_readers))
+        self.values.append(('Queued writers', self.queued_writers))
+
+    def read_attributes(self):
+        """Read the attributes of the rwlock."""
+
+        if self.shared:
+            self.values.append(('Shared', 'Yes'))
+        else:
+            self.values.append(('Shared', 'No'))
+
+        if self.prefers_writers:
+            self.values.append(('Prefers', 'Writers'))
+        else:
+            self.values.append(('Prefers', 'Readers'))
+
+class RWLockAttributesPrinter(object):
+    """Pretty printer for pthread_rwlockattr_t.
+
+    In the NPTL this is a type that's always casted to
+    struct pthread_rwlockattr, which has two fields ('lockkind' and 'pshared')
+    containing the actual attributes.
+    """
+
+    def __init__(self, rwlockattr):
+        """Initialize the printer's internal data structures.
+
+        Args:
+            rwlockattr: A gdb.value representing a pthread_rwlockattr_t.
+        """
+
+        rwlockattr_struct = gdb.lookup_type('struct pthread_rwlockattr')
+        self.rwlockattr = rwlockattr.cast(rwlockattr_struct)
+        self.values = []
+        self.read_values()
+
+    def to_string(self):
+        """gdb API function.
+
+        This is called from gdb when we try to print a pthread_rwlockattr_t.
+        """
+
+        return 'pthread_rwlockattr_t'
+
+    def children(self):
+        """gdb API function.
+
+        This is called from gdb when we try to print a pthread_rwlockattr_t.
+        """
+
+        return self.values
+
+    def read_values(self):
+        """Read the rwlockattr's info and store it in self.values.
+
+        The data contained in self.values will be returned by the Iterator
+        created in self.children.
+        """
+
+        rwlock_type = self.rwlockattr['lockkind']
+        shared = self.rwlockattr['pshared']
+
+        if shared == PTHREAD_PROCESS_SHARED:
+            self.values.append(('Shared', 'Yes'))
+        else:
+            # PTHREAD_PROCESS_PRIVATE
+            self.values.append(('Shared', 'No'))
+
+        if (rwlock_type == PTHREAD_RWLOCK_PREFER_READER_NP or
+            rwlock_type == PTHREAD_RWLOCK_PREFER_WRITER_NP):
+            # This is a known bug.  Using PTHREAD_RWLOCK_PREFER_WRITER_NP will
+            # still make the rwlock prefer readers.
+            self.values.append(('Prefers', 'Readers'))
+        elif rwlock_type == PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP:
+            self.values.append(('Prefers', 'Writers'))
+
+def register(objfile):
+    """Register the pretty printers within the given objfile."""
+
+    printer = gdb.printing.RegexpCollectionPrettyPrinter('glibc pthread locks')
+
+    printer.add_printer('pthread_mutex_t', r'^pthread_mutex_t$',
+                        MutexPrinter)
+    printer.add_printer('pthread_mutexattr_t', r'^pthread_mutexattr_t$',
+                        MutexAttributesPrinter)
+    printer.add_printer('pthread_cond_t', r'^pthread_cond_t$',
+                        ConditionVariablePrinter)
+    printer.add_printer('pthread_condattr_t', r'^pthread_condattr_t$',
+                        ConditionVariableAttributesPrinter)
+    printer.add_printer('pthread_rwlock_t', r'^pthread_rwlock_t$',
+                        RWLockPrinter)
+    printer.add_printer('pthread_rwlockattr_t', r'^pthread_rwlockattr_t$',
+                        RWLockAttributesPrinter)
+
+    gdb.printing.register_pretty_printer(objfile, printer)
+
+register(gdb.current_objfile())
diff --git a/nptl/nptl_lock_constants.py b/nptl/nptl_lock_constants.py
new file mode 100644
index 0000000..29857b6
--- /dev/null
+++ b/nptl/nptl_lock_constants.py
@@ -0,0 +1,49 @@
+# GENERATED FILE
+
+# Constant definitions for pretty printers.
+# See gen-py-const.awk for details.
+
+PTHREAD_MUTEX_KIND_MASK = 3
+PTHREAD_MUTEX_NORMAL = 0
+PTHREAD_MUTEX_RECURSIVE = 1
+PTHREAD_MUTEX_ERRORCHECK = 2
+PTHREAD_MUTEX_ADAPTIVE_NP = 3
+PTHREAD_MUTEX_DESTROYED = -1
+PTHREAD_MUTEX_UNLOCKED = 0
+PTHREAD_MUTEX_LOCKED_NO_WAITERS = 1
+PTHREAD_MUTEX_INCONSISTENT = 2147483647
+PTHREAD_MUTEX_NOTRECOVERABLE = 2147483646
+FUTEX_OWNER_DIED = 1073741824
+FUTEX_WAITERS = -2147483648
+FUTEX_TID_MASK = 1073741823
+PTHREAD_MUTEX_ROBUST_NORMAL_NP = 16
+PTHREAD_MUTEX_PRIO_INHERIT_NP = 32
+PTHREAD_MUTEX_PRIO_PROTECT_NP = 64
+PTHREAD_MUTEX_PSHARED_BIT = 128
+PTHREAD_MUTEX_PRIO_CEILING_SHIFT = 19
+PTHREAD_MUTEX_PRIO_CEILING_MASK = -524288
+PTHREAD_MUTEXATTR_PROTOCOL_SHIFT = 28
+PTHREAD_MUTEXATTR_PROTOCOL_MASK = 805306368
+PTHREAD_MUTEXATTR_PRIO_CEILING_MASK = 16773120
+PTHREAD_MUTEXATTR_FLAG_ROBUST = 1073741824
+PTHREAD_MUTEXATTR_FLAG_PSHARED = -2147483648
+PTHREAD_MUTEXATTR_FLAG_BITS = -251662336
+PTHREAD_MUTEX_NO_ELISION_NP = 512
+PTHREAD_PRIO_NONE = 0
+PTHREAD_PRIO_INHERIT = 1
+PTHREAD_PRIO_PROTECT = 2
+PTHREAD_COND_SHARED = -1
+PTHREAD_COND_DESTROYED = -1
+COND_NWAITERS_SHIFT = 1
+CLOCK_REALTIME = 0
+CLOCK_MONOTONIC = 1
+CLOCK_PROCESS_CPUTIME_ID = 2
+CLOCK_THREAD_CPUTIME_ID = 3
+CLOCK_MONOTONIC_RAW = 4
+CLOCK_REALTIME_COARSE = 5
+CLOCK_MONOTONIC_COARSE = 6
+PTHREAD_RWLOCK_PREFER_READER_NP = 0
+PTHREAD_RWLOCK_PREFER_WRITER_NP = 1
+PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP = 2
+PTHREAD_PROCESS_PRIVATE = 0
+PTHREAD_PROCESS_SHARED = 1
diff --git a/nptl/nptl_lock_constants.pysym b/nptl/nptl_lock_constants.pysym
new file mode 100644
index 0000000..e6ac427
--- /dev/null
+++ b/nptl/nptl_lock_constants.pysym
@@ -0,0 +1,75 @@
+#include <pthreadP.h>
+
+-- Mutex types
+PTHREAD_MUTEX_KIND_MASK          PTHREAD_MUTEX_KIND_MASK_NP
+PTHREAD_MUTEX_NORMAL
+PTHREAD_MUTEX_RECURSIVE          PTHREAD_MUTEX_RECURSIVE_NP
+PTHREAD_MUTEX_ERRORCHECK         PTHREAD_MUTEX_ERRORCHECK_NP
+PTHREAD_MUTEX_ADAPTIVE_NP
+
+-- Mutex status
+-- These are hardcoded all over the code; there are no enums/macros for them.
+PTHREAD_MUTEX_DESTROYED         -1
+PTHREAD_MUTEX_UNLOCKED           0
+PTHREAD_MUTEX_LOCKED_NO_WAITERS  1
+
+-- For robust mutexes
+PTHREAD_MUTEX_INCONSISTENT
+PTHREAD_MUTEX_NOTRECOVERABLE
+FUTEX_OWNER_DIED
+
+-- For robust and PI mutexes
+FUTEX_WAITERS
+FUTEX_TID_MASK
+
+-- Mutex attributes
+PTHREAD_MUTEX_ROBUST_NORMAL_NP
+PTHREAD_MUTEX_PRIO_INHERIT_NP
+PTHREAD_MUTEX_PRIO_PROTECT_NP
+PTHREAD_MUTEX_PSHARED_BIT
+PTHREAD_MUTEX_PRIO_CEILING_SHIFT
+PTHREAD_MUTEX_PRIO_CEILING_MASK
+
+-- Mutex attribute flags
+PTHREAD_MUTEXATTR_PROTOCOL_SHIFT
+PTHREAD_MUTEXATTR_PROTOCOL_MASK
+PTHREAD_MUTEXATTR_PRIO_CEILING_MASK
+PTHREAD_MUTEXATTR_FLAG_ROBUST
+PTHREAD_MUTEXATTR_FLAG_PSHARED
+PTHREAD_MUTEXATTR_FLAG_BITS
+PTHREAD_MUTEX_NO_ELISION_NP
+
+-- Priority protocols
+PTHREAD_PRIO_NONE
+PTHREAD_PRIO_INHERIT
+PTHREAD_PRIO_PROTECT
+
+-- These values are hardcoded as well:
+-- Value of __mutex for shared condvars.
+PTHREAD_COND_SHARED             ~0l
+
+-- Value of __total_seq for destroyed condvars.
+PTHREAD_COND_DESTROYED          -1ull
+
+-- __nwaiters encodes the number of threads waiting on a condvar
+-- and the clock ID.
+-- __nwaiters >> COND_NWAITERS_SHIFT gives us the number of waiters.
+COND_NWAITERS_SHIFT
+
+-- Condvar clock IDs
+CLOCK_REALTIME
+CLOCK_MONOTONIC
+CLOCK_PROCESS_CPUTIME_ID
+CLOCK_THREAD_CPUTIME_ID
+CLOCK_MONOTONIC_RAW
+CLOCK_REALTIME_COARSE
+CLOCK_MONOTONIC_COARSE
+
+-- Rwlock attributes
+PTHREAD_RWLOCK_PREFER_READER_NP
+PTHREAD_RWLOCK_PREFER_WRITER_NP
+PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP
+
+-- 'Shared' attribute values
+PTHREAD_PROCESS_PRIVATE
+PTHREAD_PROCESS_SHARED
diff --git a/pretty-printers/Makefile b/pretty-printers/Makefile
new file mode 100644
index 0000000..ff04108
--- /dev/null
+++ b/pretty-printers/Makefile
@@ -0,0 +1,81 @@
+# Makefile for the Python pretty printers.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+# This contains rules for building and running the pretty printer tests.
+
+subdir := pretty-printers
+
+include ../Makeconfig
+
+PYTHON := python
+
+tests-pretty-printers := test-mutex-attributes test-mutex-printer \
+			 test-condvar-attributes test-condvar-printer \
+			 test-rwlock-attributes test-rwlock-printer
+
+# Add the test programs to test-srcs so that they'll be compiled regardless
+# of whether we should actually run them.
+test-srcs := $(tests-pretty-printers)
+
+ifeq ($(build-shared),yes)
+nptl-tests-libs := $(shared-thread-library)
+else
+nptl-tests-libs := $(static-thread-library)
+endif
+
+# The test programs need to be compiled without optimizations so they won't
+# confuse gdb.  We could use either the 'GCC optimize' pragma or the 'optimize'
+# function attribute to achieve this; however, at least on ARM, gcc always
+# produces different debugging symbols when invoked with a -O greater than 0
+# than when invoked with -O0, regardless of anything else we're using
+# to suppress optimizations.  Therefore, we need to explicitly pass -O0 to it
+# through CFLAGS.
+# Additionally, the build system will try to -include $(common-objpfx)/config.h
+# when compiling the tests, which will throw an error if some special macros
+# (such as __OPTIMIZE__ and IS_IN_BUILD) aren't defined.  To avoid this, we
+# tell gcc to define IS_IN_build.
+CFLAGS-test-mutex-attributes.c := -O0 -ggdb3 -DIS_IN_build
+CFLAGS-test-mutex-printer.c := -O0 -ggdb3 -DIS_IN_build
+CFLAGS-test-condvar-attributes.c := -O0 -ggdb3 -DIS_IN_build
+CFLAGS-test-condvar-printer.c := -O0 -ggdb3 -DIS_IN_build
+CFLAGS-test-rwlock-attributes.c := -O0 -ggdb3 -DIS_IN_build
+CFLAGS-test-rwlock-printer.c := -O0 -ggdb3 -DIS_IN_build
+
+tests-pretty-printers-dest := $(addprefix $(objpfx),$(tests-pretty-printers))
+tests-pretty-printers-pp := $(addsuffix -pp,$(tests-pretty-printers-dest))
+
+ifeq ($(run-built-tests),yes)
+tests-special += $(tests-pretty-printers-pp)
+endif
+
+include ../Rules
+
+# Add the thread libraries to the prerequisites of the NPTL test programs.
+$(tests-pretty-printers-dest): $(nptl-tests-libs)
+
+# We won't actually create any *-pp files, so we mark this target as PHONY
+# to ensure it always runs when required.
+.PHONY: $(tests-pretty-printers-pp)
+
+# Static pattern rule that matches the test-* targets to their .c and .py
+# prerequisites.  It'll run the corresponding test script for each test program
+# we compiled.  test_common.py must be present for all.
+$(tests-pretty-printers-pp): $(objpfx)%-pp: $(objpfx)% %.py test_common.py
+	$(test-wrapper-env) $(PYTHON) $*.py $*.c $(objpfx)$*; \
+	$(evaluate-test)
diff --git a/pretty-printers/README b/pretty-printers/README
new file mode 100644
index 0000000..0dc26dd
--- /dev/null
+++ b/pretty-printers/README
@@ -0,0 +1,130 @@
+README for the glibc Python pretty-printers
+===========================================
+
+Pretty printers are gdb extensions that allow it to print useful, human-readable
+information about a program's variables.  For example, for a pthread_mutex_t
+gdb would usually output something like this:
+
+(gdb) print mutex
+$1 = {
+  __data = {
+    __lock = 22020096,
+    __count = 0,
+    __owner = 0,
+    __nusers = 0,
+    __kind = 576,
+    __spins = 0,
+    __elision = 0,
+    __list = {
+      __prev = 0x0,
+      __next = 0x0
+    }
+  },
+  __size = "\000\000P\001", '\000' <repeats 12 times>, "@\002", '\000' <repeats 21 times>,
+  __align = 22020096
+}
+
+However, with a pretty printer gdb will output something like this:
+
+(gdb) print mutex
+$1 = pthread_mutex_t = {
+  Type = Normal,
+  Status = Unlocked,
+  Robust = No,
+  Shared = No,
+  Protocol = Priority protect,
+  Priority ceiling = 42
+}
+
+Before printing a value, gdb will first check if there's a pretty printer
+registered for it.  If there is, it'll use it, otherwise it'll print the value
+as usual.  Pretty printers can be registered in various ways; for our purposes
+we register them for the current objfile by calling
+gdb.printing.register_pretty_printer().
+
+Currently our printers are based on gdb.RegexpCollectionPrettyPrinter, which
+means they'll be triggered if the type of the variable we're printing matches
+a given regular expression.  For example, MutexPrinter will be triggered if
+our variable's type matches the regexp '^pthread_mutex_t$'.
+
+Besides the printers themselves, each module may have a constants file which the
+printers will import.  These constants are generated from C headers during the
+build process, and need to be in the Python search path when loading the
+printers.
+
+
+Installing and loading
+======================
+
+The pretty printers and their constant files may be installed in different paths
+for each distro, though gdb should be able to automatically load them by itself.
+When in doubt, you can use the 'info pretty printer' gdb command to list the
+loaded pretty printers.
+
+If the printers aren't automatically loaded for some reason, you should add the
+following to your .gdbinit:
+
+python
+import sys
+sys.path.insert(0, '/path/to/constants/file/directory')
+end
+
+source /path/to/printers.py
+
+If you're building glibc manually, '/path/to/constants/file/directory' should be
+'/path/to/glibc-source/submodule', where 'submodule' is e.g. nptl.
+
+
+Testing
+=======
+
+The pretty printers come with a small test suite based on PExpect, which is a
+Python module with Expect-like features for spawning and controlling interactive
+programs.  Each printer has a corresponding C program and a Python script
+that uses PExpect to drive gdb through the program and compare its output to
+the expected printer's.
+
+The tests run on the glibc host, which is assumed to have both gdb and PExpect;
+if any of those is absent the tests will fail with code 77 (UNSUPPORTED).
+Native builds can be tested simply by doing 'make check'; cross builds must use
+cross-test-ssh.sh as test-wrapper, like this:
+
+make test-wrapper='/path/to/scripts/cross-test-ssh.sh user@host' check
+
+(Remember to share the build system's filesystem with the glibc host's through
+NFS or something similar).
+
+Running 'make check' on a cross build will only compile the test programs,
+without running the scripts.
+
+
+Known issues
+============
+
+* Pretty printers are inherently coupled to the code they're targetting, thus
+any changes to the target code must also update the corresponding printers.
+On the plus side, the printer code itself may serve as a kind of documentation
+for the target code.
+
+* Older versions of the gdb Python API have a bug where
+gdb.RegexpCollectionPrettyPrinter would not be able to get a value's real type
+if it was typedef'd.  This would cause gdb to ignore the pretty printers for
+types like pthread_mutex_t, which is defined as:
+
+typedef union
+{
+  ...
+} pthread_mutex_t;
+
+This was fixed in commit 1b588015839caafc608a6944a78aea170f5fb2f6.  However,
+typedef'ing an already typedef'd type may cause a similar issue, e.g.:
+
+typedef pthread_mutex_t mutex;
+mutex a_mutex;
+
+Here, trying to print a_mutex won't trigger the pthread_mutex_t printer.
+
+* The test programs must be compiled without optimizations.  This is necessary
+because the test scripts rely on the C code structure being preserved when
+stepping through the programs.  Things like aggressive instruction reordering
+or optimizing variables out may make this kind of testing impossible.
diff --git a/pretty-printers/test-condvar-attributes.c b/pretty-printers/test-condvar-attributes.c
new file mode 100644
index 0000000..4db4098
--- /dev/null
+++ b/pretty-printers/test-condvar-attributes.c
@@ -0,0 +1,94 @@
+/* Helper program for testing the pthread_cond_t and pthread_condattr_t
+   pretty printers.
+
+   Copyright (C) 2016 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <http://www.gnu.org/licenses/>.  */
+
+/* Keep the calls to the pthread_* functions on separate lines to make it easy
+   to advance through the program using the gdb 'next' command.  */
+
+#include <time.h>
+#include <pthread.h>
+
+#define PASS 0
+#define FAIL 1
+
+static int condvar_reinit (pthread_cond_t *condvar,
+			   const pthread_condattr_t *attr);
+static int test_setclock (pthread_cond_t *condvar, pthread_condattr_t *attr);
+static int test_setpshared (pthread_cond_t *condvar, pthread_condattr_t *attr);
+
+/* Need these so we don't have lines longer than 79 chars.  */
+#define SET_SHARED(attr, shared) pthread_condattr_setpshared (attr, shared)
+
+int
+main (void)
+{
+  pthread_cond_t condvar;
+  pthread_condattr_t attr;
+  int result = FAIL;
+
+  if (pthread_condattr_init (&attr) == 0
+      && pthread_cond_init (&condvar, NULL) == 0
+      && test_setclock (&condvar, &attr) == PASS
+      && test_setpshared (&condvar, &attr) == PASS)
+    result = PASS;
+  /* Else, one of the pthread_cond* functions failed.  */
+
+  return result;
+}
+
+/* Destroys CONDVAR and re-initializes it using ATTR.  */
+static int
+condvar_reinit (pthread_cond_t *condvar, const pthread_condattr_t *attr)
+{
+  int result = FAIL;
+
+  if (pthread_cond_destroy (condvar) == 0
+      && pthread_cond_init (condvar, attr) == 0)
+    result = PASS;
+
+  return result;
+}
+
+/* Tests setting the clock ID attribute.  */
+static int
+test_setclock (pthread_cond_t *condvar, pthread_condattr_t *attr)
+{
+  int result = FAIL;
+
+  if (pthread_condattr_setclock (attr, CLOCK_REALTIME) == 0 /* Set clock.  */
+      && condvar_reinit (condvar, attr) == PASS)
+    result = PASS;
+
+  return result;
+}
+
+/* Tests setting whether the condvar can be shared between processes.  */
+static int
+test_setpshared (pthread_cond_t *condvar, pthread_condattr_t *attr)
+{
+  int result = FAIL;
+
+  if (SET_SHARED (attr, PTHREAD_PROCESS_SHARED) == 0 /* Set shared.  */
+      && condvar_reinit (condvar, attr) == PASS
+      && SET_SHARED (attr, PTHREAD_PROCESS_PRIVATE) == 0
+      && condvar_reinit (condvar, attr) == PASS)
+    result = PASS;
+
+  return result;
+}
diff --git a/pretty-printers/test-condvar-attributes.py b/pretty-printers/test-condvar-attributes.py
new file mode 100644
index 0000000..7a16b6f
--- /dev/null
+++ b/pretty-printers/test-condvar-attributes.py
@@ -0,0 +1,59 @@
+# Common tests for the ConditionVariablePrinter and
+# ConditionVariableAttributesPrinter classes.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+import sys
+
+from test_common import *
+
+test_source = sys.argv[1]
+test_bin = sys.argv[2]
+result = PASS
+
+try:
+    init_test(test_bin)
+    go_to_main()
+
+    condvar_var = 'condvar'
+    condvar_to_string = 'pthread_cond_t'
+
+    attr_var = 'attr'
+    attr_to_string = 'pthread_condattr_t'
+
+    break_at(test_source, 'Set clock')
+    continue_cmd() # Go to test_setclock
+    next_cmd(2)
+    test_printer(condvar_var, condvar_to_string, {'Clock ID': 'CLOCK_REALTIME'})
+    test_printer(attr_var, attr_to_string, {'Clock ID': 'CLOCK_REALTIME'})
+
+    break_at(test_source, 'Set shared')
+    continue_cmd() # Go to test_setpshared
+    next_cmd(2)
+    test_printer(condvar_var, condvar_to_string, {'Shared': 'Yes'})
+    test_printer(attr_var, attr_to_string, {'Shared': 'Yes'})
+    next_cmd(2)
+    test_printer(condvar_var, condvar_to_string, {'Shared': 'No'})
+    test_printer(attr_var, attr_to_string, {'Shared': 'No'})
+
+    continue_cmd() # Exit
+
+except pexpect.TIMEOUT:
+    result = FAIL
+
+exit(result)
diff --git a/pretty-printers/test-condvar-printer.c b/pretty-printers/test-condvar-printer.c
new file mode 100644
index 0000000..0f2a5f4
--- /dev/null
+++ b/pretty-printers/test-condvar-printer.c
@@ -0,0 +1,57 @@
+/* Helper program for testing the pthread_cond_t pretty printer.
+
+   Copyright (C) 2016 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <http://www.gnu.org/licenses/>.  */
+
+/* Keep the calls to the pthread_* functions on separate lines to make it easy
+   to advance through the program using the gdb 'next' command.  */
+
+#include <time.h>
+#include <pthread.h>
+
+#define PASS 0
+#define FAIL 1
+
+static int test_status_destroyed (pthread_cond_t *condvar);
+
+int
+main (void)
+{
+  pthread_cond_t condvar;
+  pthread_condattr_t attr;
+  int result = FAIL;
+
+  if (pthread_condattr_init (&attr) == 0
+      && test_status_destroyed (&condvar) == PASS)
+    result = PASS;
+  /* Else, one of the pthread_cond* functions failed.  */
+
+  return result;
+}
+
+/* Initializes CONDVAR, then destroys it.  */
+static int
+test_status_destroyed (pthread_cond_t *condvar)
+{
+  int result = FAIL;
+
+  if (pthread_cond_init (condvar, NULL) == 0
+      && pthread_cond_destroy (condvar) == 0)
+    result = PASS; /* Test status (destroyed).  */
+
+  return result;
+}
diff --git a/pretty-printers/test-condvar-printer.py b/pretty-printers/test-condvar-printer.py
new file mode 100644
index 0000000..ad4fc61
--- /dev/null
+++ b/pretty-printers/test-condvar-printer.py
@@ -0,0 +1,44 @@
+# Common tests for the ConditionVariablePrinter class.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+import sys
+
+from test_common import *
+
+test_source = sys.argv[1]
+test_bin = sys.argv[2]
+result = PASS
+
+try:
+    init_test(test_bin)
+    go_to_main()
+
+    var = 'condvar'
+    to_string = 'pthread_cond_t'
+
+    break_at(test_source, 'Test status (destroyed)')
+    continue_cmd() # Go to test_status_destroyed
+    test_printer(var, to_string, {'Status': 'Destroyed'})
+
+    continue_cmd() # Exit
+
+except pexpect.TIMEOUT:
+    result = FAIL
+
+exit(result)
diff --git a/pretty-printers/test-mutex-attributes.c b/pretty-printers/test-mutex-attributes.c
new file mode 100644
index 0000000..9ecfff7
--- /dev/null
+++ b/pretty-printers/test-mutex-attributes.c
@@ -0,0 +1,144 @@
+/* Helper program for testing the pthread_mutex_t and pthread_mutexattr_t
+   pretty printers.
+
+   Copyright (C) 2016 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <http://www.gnu.org/licenses/>.  */
+
+/* Keep the calls to the pthread_* functions on separate lines to make it easy
+   to advance through the program using the gdb 'next' command.  */
+
+#include <pthread.h>
+
+#define PASS 0
+#define FAIL 1
+#define PRIOCEILING 42
+
+/* Need these so we don't have lines longer than 79 chars.  */
+#define SET_TYPE(attr, type) pthread_mutexattr_settype (attr, type)
+#define SET_ROBUST(attr, robust) pthread_mutexattr_setrobust (attr, robust)
+#define SET_SHARED(attr, shared) pthread_mutexattr_setpshared (attr, shared)
+#define SET_PROTOCOL(attr, protocol) \
+	pthread_mutexattr_setprotocol (attr, protocol)
+#define SET_PRIOCEILING(mutex, prioceiling, old_ceiling) \
+	pthread_mutex_setprioceiling (mutex, prioceiling, old_ceiling)
+
+static int mutex_reinit (pthread_mutex_t *mutex,
+			 const pthread_mutexattr_t *attr);
+static int test_settype (pthread_mutex_t *mutex, pthread_mutexattr_t *attr);
+static int test_setrobust (pthread_mutex_t *mutex, pthread_mutexattr_t *attr);
+static int test_setpshared (pthread_mutex_t *mutex, pthread_mutexattr_t *attr);
+static int test_setprotocol (pthread_mutex_t *mutex,
+			     pthread_mutexattr_t *attr);
+
+int
+main (void)
+{
+  pthread_mutex_t mutex;
+  pthread_mutexattr_t attr;
+  int result = FAIL;
+
+  if (pthread_mutexattr_init (&attr) == 0
+      && pthread_mutex_init (&mutex, NULL) == 0
+      && test_settype (&mutex, &attr) == PASS
+      && test_setrobust (&mutex, &attr) == PASS
+      && test_setpshared (&mutex, &attr) == PASS
+      && test_setprotocol (&mutex, &attr) == PASS)
+    result = PASS;
+  /* Else, one of the pthread_mutex* functions failed.  */
+
+  return result;
+}
+
+/* Destroys MUTEX and re-initializes it using ATTR.  */
+static int
+mutex_reinit (pthread_mutex_t *mutex, const pthread_mutexattr_t *attr)
+{
+  int result = FAIL;
+
+  if (pthread_mutex_destroy (mutex) == 0
+      && pthread_mutex_init (mutex, attr) == 0)
+    result = PASS;
+
+  return result;
+}
+
+/* Tests setting the mutex type.  */
+static int
+test_settype (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+  int result = FAIL;
+
+  if (SET_TYPE (attr, PTHREAD_MUTEX_ERRORCHECK) == 0 /* Set type.  */
+      && mutex_reinit (mutex, attr) == 0
+      && SET_TYPE (attr, PTHREAD_MUTEX_RECURSIVE) == 0
+      && mutex_reinit (mutex, attr) == 0
+      && SET_TYPE (attr, PTHREAD_MUTEX_NORMAL) == 0
+      && mutex_reinit (mutex, attr) == 0)
+    result = PASS;
+
+  return result;
+}
+
+/* Tests setting whether the mutex is robust.  */
+static int
+test_setrobust (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+  int result = FAIL;
+
+  if (SET_ROBUST (attr, PTHREAD_MUTEX_ROBUST) == 0 /* Set robust.  */
+      && mutex_reinit (mutex, attr) == 0
+      && SET_ROBUST (attr, PTHREAD_MUTEX_STALLED) == 0
+      && mutex_reinit (mutex, attr) == 0)
+    result = PASS;
+
+  return result;
+}
+
+/* Tests setting whether the mutex can be shared between processes.  */
+static int
+test_setpshared (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+  int result = FAIL;
+
+  if (SET_SHARED (attr, PTHREAD_PROCESS_SHARED) == 0 /* Set shared.  */
+      && mutex_reinit (mutex, attr) == 0
+      && SET_SHARED (attr, PTHREAD_PROCESS_PRIVATE) == 0
+      && mutex_reinit (mutex, attr) == 0)
+    result = PASS;
+
+  return result;
+}
+
+/* Tests setting the mutex protocol and, for Priority Protect, the Priority
+   Ceiling.  */
+static int
+test_setprotocol (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+  int result = FAIL;
+  int old_prioceiling;
+
+  if (SET_PROTOCOL (attr, PTHREAD_PRIO_INHERIT) == 0 /* Set protocol.  */
+      && mutex_reinit (mutex, attr) == 0
+      && SET_PROTOCOL (attr, PTHREAD_PRIO_PROTECT) == 0
+      && mutex_reinit (mutex, attr) == 0
+      && SET_PRIOCEILING(mutex, PRIOCEILING, &old_prioceiling) == 0
+      && SET_PROTOCOL (attr, PTHREAD_PRIO_NONE) == 0
+      && mutex_reinit (mutex, attr) == 0)
+    result = PASS;
+
+  return result;
+}
diff --git a/pretty-printers/test-mutex-attributes.py b/pretty-printers/test-mutex-attributes.py
new file mode 100644
index 0000000..9d84841
--- /dev/null
+++ b/pretty-printers/test-mutex-attributes.py
@@ -0,0 +1,89 @@
+# Common tests for the MutexPrinter and MutexAttributesPrinter classes.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+import sys
+
+from test_common import *
+
+test_source = sys.argv[1]
+test_bin = sys.argv[2]
+result = PASS
+PRIOCEILING = 42
+
+try:
+    init_test(test_bin)
+    go_to_main()
+
+    mutex_var = 'mutex'
+    mutex_to_string = 'pthread_mutex_t'
+
+    attr_var = 'attr'
+    attr_to_string = 'pthread_mutexattr_t'
+
+    break_at(test_source, 'Set type')
+    continue_cmd() # Go to test_settype
+    next_cmd(2)
+    test_printer(attr_var, attr_to_string, {'Type': 'Error check'})
+    test_printer(mutex_var, mutex_to_string, {'Type': 'Error check'})
+    next_cmd(2)
+    test_printer(attr_var, attr_to_string, {'Type': 'Recursive'})
+    test_printer(mutex_var, mutex_to_string, {'Type': 'Recursive'})
+    next_cmd(2)
+    test_printer(attr_var, attr_to_string, {'Type': 'Normal'})
+    test_printer(mutex_var, mutex_to_string, {'Type': 'Normal'})
+
+    break_at(test_source, 'Set robust')
+    continue_cmd() # Go to test_setrobust
+    next_cmd(2)
+    test_printer(attr_var, attr_to_string, {'Robust': 'Yes'})
+    test_printer(mutex_var, mutex_to_string, {'Robust': 'Yes'})
+    next_cmd(2)
+    test_printer(attr_var, attr_to_string, {'Robust': 'No'})
+    test_printer(mutex_var, mutex_to_string, {'Robust': 'No'})
+
+    break_at(test_source, 'Set shared')
+    continue_cmd() # Go to test_setpshared
+    next_cmd(2)
+    test_printer(attr_var, attr_to_string, {'Shared': 'Yes'})
+    test_printer(mutex_var, mutex_to_string, {'Shared': 'Yes'})
+    next_cmd(2)
+    test_printer(attr_var, attr_to_string, {'Shared': 'No'})
+    test_printer(mutex_var, mutex_to_string, {'Shared': 'No'})
+
+    break_at(test_source, 'Set protocol')
+    continue_cmd() # Go to test_setprotocol
+    next_cmd(2)
+    test_printer(attr_var, attr_to_string, {'Protocol': 'Priority inherit'})
+    test_printer(mutex_var, mutex_to_string, {'Protocol': 'Priority inherit'})
+    next_cmd(2)
+    test_printer(attr_var, attr_to_string, {'Protocol': 'Priority protect'})
+    test_printer(mutex_var, mutex_to_string, {'Protocol': 'Priority protect'})
+    next_cmd(2)
+    test_printer(mutex_var, mutex_to_string, {'Priority ceiling':
+                                              str(PRIOCEILING)})
+    next_cmd()
+    test_printer(attr_var, attr_to_string, {'Protocol': 'None'})
+    test_printer(mutex_var, mutex_to_string, {'Protocol': 'None'})
+
+    continue_cmd() # Exit
+
+except pexpect.TIMEOUT:
+    result = FAIL
+
+exit(result)
diff --git a/pretty-printers/test-mutex-printer.c b/pretty-printers/test-mutex-printer.c
new file mode 100644
index 0000000..d072177
--- /dev/null
+++ b/pretty-printers/test-mutex-printer.c
@@ -0,0 +1,151 @@
+/* Helper program for testing the pthread_mutex_t pretty printer.
+
+   Copyright (C) 2016 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <http://www.gnu.org/licenses/>.  */
+
+/* Keep the calls to the pthread_* functions on separate lines to make it easy
+   to advance through the program using the gdb 'next' command.  */
+
+#include <stdlib.h>
+#include <errno.h>
+#include <pthread.h>
+
+#define PASS 0
+#define FAIL 1
+
+static int test_status_destroyed (pthread_mutex_t *mutex);
+static int test_status_no_robust (pthread_mutex_t *mutex,
+				  pthread_mutexattr_t *attr);
+static int test_status_robust (pthread_mutex_t *mutex,
+			       pthread_mutexattr_t *attr);
+static int test_locking_state_robust (pthread_mutex_t *mutex);
+static void *thread_function (void *arg);
+static int test_recursive_locks (pthread_mutex_t *mutex,
+				 pthread_mutexattr_t *attr);
+
+int
+main (void)
+{
+  pthread_mutex_t mutex;
+  pthread_mutexattr_t attr;
+  int result = FAIL;
+
+  if (pthread_mutexattr_init (&attr) == 0
+      && test_status_destroyed (&mutex) == PASS
+      && test_status_no_robust (&mutex, &attr) == PASS
+      && test_status_robust (&mutex, &attr) == PASS
+      && test_recursive_locks (&mutex, &attr) == PASS)
+    result = PASS;
+  /* Else, one of the pthread_mutex* functions failed.  */
+
+  return result;
+}
+
+/* Initializes MUTEX, then destroys it.  */
+static int
+test_status_destroyed (pthread_mutex_t *mutex)
+{
+  int result = FAIL;
+
+  if (pthread_mutex_init (mutex, NULL) == 0
+      && pthread_mutex_destroy (mutex) == 0)
+    result = PASS; /* Test status (destroyed).  */
+
+  return result;
+}
+
+/* Tests locking of non-robust mutexes.  */
+static int
+test_status_no_robust (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+  int result = FAIL;
+
+  if (pthread_mutexattr_setrobust (attr, PTHREAD_MUTEX_STALLED) == 0
+      && pthread_mutex_init (mutex, attr) == 0
+      && pthread_mutex_lock (mutex) == 0 /* Test status (non-robust).  */
+      && pthread_mutex_unlock (mutex) == 0
+      && pthread_mutex_destroy (mutex) == 0)
+    result = PASS;
+
+  return result;
+}
+
+/* Tests locking of robust mutexes.  */
+static int
+test_status_robust (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+  int result = FAIL;
+
+  if (pthread_mutexattr_setrobust (attr, PTHREAD_MUTEX_ROBUST) == 0
+      && pthread_mutex_init (mutex, attr) == 0
+      && test_locking_state_robust (mutex) == PASS /* Test status (robust).  */
+      && pthread_mutex_destroy (mutex) == 0)
+    result = PASS;
+
+  return result;
+}
+
+/* Tests locking and state corruption of robust mutexes.  We'll mark it as
+   inconsistent, then not recoverable.  */
+static int
+test_locking_state_robust (pthread_mutex_t *mutex)
+{
+  int result = FAIL;
+  pthread_t thread; /* Test locking and state (robust).  */
+
+  if (pthread_create (&thread, NULL, thread_function, mutex) == 0
+      && pthread_join (thread, NULL) == 0
+      && pthread_mutex_lock (mutex) == EOWNERDEAD
+      && pthread_mutex_unlock (mutex) == 0)
+    result = PASS;
+
+  return result;
+}
+
+/* Function to be called by the child thread when testing robust mutexes.  */
+static void *
+thread_function (void *arg)
+{
+  pthread_mutex_t *mutex = (pthread_mutex_t *)arg;
+
+  if (pthread_mutex_lock (mutex) != 0)
+    exit (FAIL);
+
+  /* Thread terminates without unlocking the mutex, thus marking it as
+     inconsistent.  */
+  return NULL;
+}
+
+/* Tests locking the mutex multiple times in a row.  */
+static int
+test_recursive_locks (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+  int result = FAIL;
+
+  if (pthread_mutexattr_settype (attr, PTHREAD_MUTEX_RECURSIVE) == 0
+      && pthread_mutex_init (mutex, attr) == 0
+      && pthread_mutex_lock (mutex) == 0
+      && pthread_mutex_lock (mutex) == 0
+      && pthread_mutex_lock (mutex) == 0 /* Test recursive locks.  */
+      && pthread_mutex_unlock (mutex) == 0
+      && pthread_mutex_unlock (mutex) == 0
+      && pthread_mutex_unlock (mutex) == 0
+      && pthread_mutex_destroy (mutex) == 0)
+    result = PASS;
+
+  return result;
+}
diff --git a/pretty-printers/test-mutex-printer.py b/pretty-printers/test-mutex-printer.py
new file mode 100644
index 0000000..5af8135
--- /dev/null
+++ b/pretty-printers/test-mutex-printer.py
@@ -0,0 +1,87 @@
+# Tests for the MutexPrinter class.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+import sys
+
+from test_common import *
+
+test_source = sys.argv[1]
+test_bin = sys.argv[2]
+result = PASS
+
+try:
+    init_test(test_bin)
+    go_to_main()
+
+    var = 'mutex'
+    to_string = 'pthread_mutex_t'
+
+    break_at(test_source, 'Test status (destroyed)')
+    continue_cmd() # Go to test_status_destroyed
+    test_printer(var, to_string, {'Status': 'Destroyed'})
+
+    break_at(test_source, 'Test status (non-robust)')
+    continue_cmd() # Go to test_status_no_robust
+    test_printer(var, to_string, {'Status': 'Unlocked'})
+    next_cmd()
+    thread_id = get_current_thread_lwpid()
+    test_printer(var, to_string, {'Status': 'Locked, possibly with no waiters',
+                                  'Owner ID': thread_id})
+
+    break_at(test_source, 'Test status (robust)')
+    continue_cmd() # Go to test_status_robust
+    test_printer(var, to_string, {'Status': 'Unlocked'})
+    break_at(test_source, 'Test locking and state (robust)')
+    continue_cmd() # Go to test_locking_state_robust
+
+    # We'll create a new thread now.  Notice the previous breakpoint will make
+    # us stop *after* the line at which we're inserting it.
+    set_scheduler_locking(True)
+    next_cmd()
+    parent = 1
+    child = 2
+    select_thread(child)
+    child_id = get_current_thread_lwpid()
+    select_thread(parent)
+    # Make the new thread finish its function while we wait.
+    continue_cmd(thread=child)
+    # The new thread should be dead by now, and the mutex state is inconsistent.
+    next_cmd()
+    test_printer(var, to_string, {'Owner ID': r'{0} \(dead\)'.format(child_id)})
+    # Try to lock and unlock the mutex.
+    next_cmd()
+    test_printer(var, to_string, {'Owner ID': thread_id,
+                            'State protected by this mutex': 'Inconsistent'})
+    next_cmd()
+    test_printer(var, to_string, {'Status': 'Unlocked',
+                            'State protected by this mutex': 'Not recoverable'})
+    set_scheduler_locking(False)
+
+    break_at(test_source, 'Test recursive locks')
+    continue_cmd() # Go to test_recursive_locks
+    test_printer(var, to_string, {'Times locked recursively': '2'})
+    next_cmd()
+    test_printer(var, to_string, {'Times locked recursively': '3'})
+
+    continue_cmd() # Exit
+
+except pexpect.TIMEOUT:
+    result = FAIL
+
+exit(result)
diff --git a/pretty-printers/test-rwlock-attributes.c b/pretty-printers/test-rwlock-attributes.c
new file mode 100644
index 0000000..d12facf
--- /dev/null
+++ b/pretty-printers/test-rwlock-attributes.c
@@ -0,0 +1,98 @@
+/* Helper program for testing the pthread_rwlock_t and pthread_rwlockattr_t
+   pretty printers.
+
+   Copyright (C) 2016 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <http://www.gnu.org/licenses/>.  */
+
+/* Keep the calls to the pthread_* functions on separate lines to make it easy
+   to advance through the program using the gdb 'next' command.  */
+
+#include <pthread.h>
+
+#define PASS 0
+#define FAIL 1
+
+/* Need these so we don't have lines longer than 79 chars.  */
+#define SET_KIND(attr, kind) pthread_rwlockattr_setkind_np (attr, kind)
+#define SET_SHARED(attr, shared) pthread_rwlockattr_setpshared (attr, shared)
+
+static int rwlock_reinit (pthread_rwlock_t *rwlock,
+			  const pthread_rwlockattr_t *attr);
+static int test_setkind_np (pthread_rwlock_t *rwlock,
+			    pthread_rwlockattr_t *attr);
+static int test_setpshared (pthread_rwlock_t *rwlock,
+			    pthread_rwlockattr_t *attr);
+
+int
+main (void)
+{
+  pthread_rwlock_t rwlock;
+  pthread_rwlockattr_t attr;
+  int result = FAIL;
+
+  if (pthread_rwlockattr_init (&attr) == 0
+      && pthread_rwlock_init (&rwlock, NULL) == 0
+      && test_setkind_np (&rwlock, &attr) == PASS
+      && test_setpshared (&rwlock, &attr) == PASS)
+    result = PASS;
+  /* Else, one of the pthread_rwlock* functions failed.  */
+
+  return result;
+}
+
+/* Destroys RWLOCK and re-initializes it using ATTR.  */
+static int
+rwlock_reinit (pthread_rwlock_t *rwlock, const pthread_rwlockattr_t *attr)
+{
+  int result = FAIL;
+
+  if (pthread_rwlock_destroy (rwlock) == 0
+      && pthread_rwlock_init (rwlock, attr) == 0)
+    result = PASS;
+
+  return result;
+}
+
+/* Tests setting whether the rwlock prefers readers or writers.  */
+static int
+test_setkind_np (pthread_rwlock_t *rwlock, pthread_rwlockattr_t *attr)
+{
+  int result = FAIL;
+
+  if (SET_KIND (attr, PTHREAD_RWLOCK_PREFER_READER_NP) == 0 /* Set kind.  */
+      && rwlock_reinit (rwlock, attr) == PASS
+      && SET_KIND (attr, PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP) == 0
+      && rwlock_reinit (rwlock, attr) == PASS)
+    result = PASS;
+
+  return result;
+}
+
+/* Tests setting whether the rwlock can be shared between processes.  */
+static int
+test_setpshared (pthread_rwlock_t *rwlock, pthread_rwlockattr_t *attr)
+{
+  int result = FAIL;
+
+  if (SET_SHARED (attr, PTHREAD_PROCESS_SHARED) == 0 /* Set shared.  */
+      && rwlock_reinit (rwlock, attr) == PASS
+      && SET_SHARED (attr, PTHREAD_PROCESS_PRIVATE) == 0
+      && rwlock_reinit (rwlock, attr) == PASS)
+    result = PASS;
+
+  return result;
+}
diff --git a/pretty-printers/test-rwlock-attributes.py b/pretty-printers/test-rwlock-attributes.py
new file mode 100644
index 0000000..72b3c28
--- /dev/null
+++ b/pretty-printers/test-rwlock-attributes.py
@@ -0,0 +1,61 @@
+# Common tests for the RWLockPrinter and RWLockAttributesPrinter classes.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+import sys
+
+from test_common import *
+
+test_source = sys.argv[1]
+test_bin = sys.argv[2]
+result = PASS
+
+try:
+    init_test(test_bin)
+    go_to_main()
+
+    rwlock_var = 'rwlock'
+    rwlock_to_string = 'pthread_rwlock_t'
+
+    attr_var = 'attr'
+    attr_to_string = 'pthread_rwlockattr_t'
+
+    break_at(test_source, 'Set kind')
+    continue_cmd() # Go to test_setkind_np
+    next_cmd(2)
+    test_printer(rwlock_var, rwlock_to_string, {'Prefers': 'Readers'})
+    test_printer(attr_var, attr_to_string, {'Prefers': 'Readers'})
+    next_cmd(2)
+    test_printer(rwlock_var, rwlock_to_string, {'Prefers': 'Writers'})
+    test_printer(attr_var, attr_to_string, {'Prefers': 'Writers'})
+
+    break_at(test_source, 'Set shared')
+    continue_cmd() # Go to test_setpshared
+    next_cmd(2)
+    test_printer(rwlock_var, rwlock_to_string, {'Shared': 'Yes'})
+    test_printer(attr_var, attr_to_string, {'Shared': 'Yes'})
+    next_cmd(2)
+    test_printer(rwlock_var, rwlock_to_string, {'Shared': 'No'})
+    test_printer(attr_var, attr_to_string, {'Shared': 'No'})
+
+    continue_cmd() # Exit
+
+except pexpect.TIMEOUT:
+    result = FAIL
+
+exit(result)
diff --git a/pretty-printers/test-rwlock-printer.c b/pretty-printers/test-rwlock-printer.c
new file mode 100644
index 0000000..dbbe9b8
--- /dev/null
+++ b/pretty-printers/test-rwlock-printer.c
@@ -0,0 +1,78 @@
+/* Helper program for testing the pthread_rwlock_t pretty printer.
+
+   Copyright (C) 2016 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <http://www.gnu.org/licenses/>.  */
+
+/* Keep the calls to the pthread_* functions on separate lines to make it easy
+   to advance through the program using the gdb 'next' command.  */
+
+#include <pthread.h>
+
+#define PASS 0
+#define FAIL 1
+
+static int test_locking_reader (pthread_rwlock_t *rwlock);
+static int test_locking_writer (pthread_rwlock_t *rwlock);
+
+int
+main (void)
+{
+  pthread_rwlock_t rwlock;
+
+  int result = FAIL;
+
+  if (test_locking_reader (&rwlock) == PASS
+      && test_locking_writer (&rwlock) == PASS)
+    result = PASS;
+  /* Else, one of the pthread_rwlock* functions failed.  */
+
+  return result;
+}
+
+/* Tests locking the rwlock multiple times as a reader.  */
+static int
+test_locking_reader (pthread_rwlock_t *rwlock)
+{
+  int result = FAIL;
+
+  if (pthread_rwlock_init (rwlock, NULL) == 0
+      && pthread_rwlock_rdlock (rwlock) == 0 /* Test locking (reader).  */
+      && pthread_rwlock_rdlock (rwlock) == 0
+      && pthread_rwlock_rdlock (rwlock) == 0
+      && pthread_rwlock_unlock (rwlock) == 0
+      && pthread_rwlock_unlock (rwlock) == 0
+      && pthread_rwlock_unlock (rwlock) == 0
+      && pthread_rwlock_destroy (rwlock) == 0)
+    result = PASS;
+
+  return result;
+}
+
+/* Tests locking the rwlock as a writer.  */
+static int
+test_locking_writer (pthread_rwlock_t *rwlock)
+{
+  int result = FAIL;
+
+  if (pthread_rwlock_init (rwlock, NULL) == 0
+      && pthread_rwlock_wrlock (rwlock) == 0 /* Test locking (writer).  */
+      && pthread_rwlock_unlock (rwlock) == 0
+      && pthread_rwlock_destroy (rwlock) == 0)
+    result = PASS;
+
+  return result;
+}
diff --git a/pretty-printers/test-rwlock-printer.py b/pretty-printers/test-rwlock-printer.py
new file mode 100644
index 0000000..a7c2f53
--- /dev/null
+++ b/pretty-printers/test-rwlock-printer.py
@@ -0,0 +1,58 @@
+# Common tests for the RWLockPrinter class.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+import sys
+
+from test_common import *
+
+test_source = sys.argv[1]
+test_bin = sys.argv[2]
+result = PASS
+
+try:
+    init_test(test_bin)
+    go_to_main()
+
+    var = 'rwlock'
+    to_string = 'pthread_rwlock_t'
+
+    break_at(test_source, 'Test locking (reader)')
+    continue_cmd() # Go to test_locking_reader
+    test_printer(var, to_string, {'Status': 'Unlocked'})
+    next_cmd()
+    test_printer(var, to_string, {'Status': r'Locked \(Read\)', 'Readers': '1'})
+    next_cmd()
+    test_printer(var, to_string, {'Readers': '2'})
+    next_cmd()
+    test_printer(var, to_string, {'Readers': '3'})
+
+    break_at(test_source, 'Test locking (writer)')
+    continue_cmd() # Go to test_locking_writer
+    test_printer(var, to_string, {'Status': 'Unlocked'})
+    next_cmd()
+    thread_id = get_current_thread_lwpid()
+    test_printer(var, to_string, {'Status': r'Locked \(Write\)',
+                                  'Writer ID': thread_id})
+
+    continue_cmd() # Exit
+
+except pexpect.TIMEOUT:
+    result = FAIL
+
+exit(result)
diff --git a/pretty-printers/test_common.py b/pretty-printers/test_common.py
new file mode 100644
index 0000000..3d75766
--- /dev/null
+++ b/pretty-printers/test_common.py
@@ -0,0 +1,301 @@
+# Common functions and variables for testing the Python pretty printers.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+"""These tests require PExpect.
+
+Attributes:
+    PASS, FAIL, UNSUPPORTED (int): Test exit codes, as per evaluate-test.sh.
+    GDB (string): A string with the name of the gdb binary.
+    gdb (pexpect.spawn): The gdb process, as handled by PExpect.
+    gdb_prompt (raw string): A pattern for matching the gdb prompt.
+"""
+
+import os
+import re
+
+PASS = 0
+FAIL = 1
+UNSUPPORTED = 77
+GDB = 'gdb'
+
+try:
+    import pexpect
+except ImportError:
+    print('PExpect must be installed in order to test the pretty printers.')
+    exit(UNSUPPORTED)
+
+if not pexpect.which(GDB):
+    print('gdb must be installed in order to test the pretty printers.')
+    exit(UNSUPPORTED)
+
+class NoLineError(Exception):
+    """Custom exception which indicates that a test file doesn't contain
+    the requested string.
+    """
+
+    def __init__(self, string):
+        """Constructor.
+
+        Args:
+            string (string): The string that was requested.
+        """
+
+        super(NoLineError, self).__init__()
+        self.string = string
+
+    def __str__(self):
+        """Shows a readable representation of the exception."""
+
+        return 'No line containing the following text: {0}'.format(self.string)
+
+timeout = 1
+TIMEOUTFACTOR = os.environ.get('TIMEOUTFACTOR')
+
+if TIMEOUTFACTOR:
+    timeout = int(TIMEOUTFACTOR)
+
+gdb = pexpect.spawn(GDB, echo=False, timeout=timeout)
+
+# Set the gdb prompt to a custom one, so that user-defined prompts won't
+# interfere.  We assume the user won't have his prompt set to this.
+gdb_prompt = r'gdb-test% '
+gdb.sendline('set prompt {0}'.format(gdb_prompt))
+gdb.expect(gdb_prompt)
+
+def test(command, pattern):
+    """Sends 'command' to gdb and expects the given 'pattern'.
+
+    If 'pattern' is None, simply consumes everything up to and including
+    the gdb prompt.
+
+    Args:
+        command (string): The command we'll send to gdb.
+        pattern (raw string): A pattern the gdb output should match.
+
+    Returns:
+        string: The string that matched 'pattern', or an empty string if
+            'pattern' was None.
+    """
+
+    match = ''
+
+    gdb.sendline(command)
+
+    if pattern:
+        # PExpect does a non-greedy match for '+' and '*'.  Since it can't look
+        # ahead on the gdb output stream, if 'pattern' ends with a '+' or a '*'
+        # we may end up matching only part of the required output.
+        # To avoid this, we'll consume 'pattern' and anything that follows it
+        # up to and including the gdb prompt, then extract 'pattern' later.
+        gdb.expect(r'{0}.+{1}'.format(pattern, gdb_prompt))
+
+        # gdb.after now contains the whole match.  Extract the text that matches
+        # 'pattern'.
+        match = re.match(pattern, gdb.after, re.DOTALL).group()
+    else:
+        # Consume just the the gdb prompt.
+        gdb.expect(gdb_prompt)
+
+    return match
+
+def init_test(test_bin):
+    """Loads the test binary file to gdb.
+
+    Args:
+        test_bin (string): The name of the test binary file.
+    """
+
+    test('file {0}'.format(test_bin), None)
+
+def go_to_main():
+    """Executes a gdb 'start' command, which takes us to main."""
+
+    test('start', r'main')
+
+def get_line_number(file_name, string):
+    """Returns the number of the line in which 'string' appears within a file.
+
+    Args:
+        file_name (string): The name of the file we'll search through.
+        string (string): The string we'll look for.
+
+    Returns:
+        int: The number of the line in which 'string' appears, starting from 1.
+    """
+    number = -1
+
+    with open(file_name) as src_file:
+        for i, line in enumerate(src_file):
+            if string in line:
+                number = i + 1
+                break
+
+    if number == -1:
+        raise NoLineError(string)
+
+    return number
+
+def break_at(file_name, string, temporary=True, thread=None):
+    """Places a breakpoint on the first line in 'file_name' containing 'string'.
+
+    'string' is usually a comment like "Stop here".  Notice this may fail unless
+    the comment is placed inline next to actual code, e.g.:
+
+        ...
+        /* Stop here */
+        ...
+
+    may fail, while:
+
+        ...
+        some_func(); /* Stop here */
+        ...
+
+    will succeed.
+
+    If 'thread' isn't None, the breakpoint will be set for all the threads.
+    Otherwise, it'll be set only for 'thread'.
+
+    Args:
+        file_name (string): The name of the file we'll place the breakpoint in.
+        string (string): A string we'll look for inside the file.
+            We'll place a breakpoint on the line which contains it.
+        temporary (bool): Whether the breakpoint should be automatically deleted
+            after we reach it.
+        thread (int): The number of the thread we'll place the breakpoint for,
+            as seen by gdb.  If specified, it should be greater than zero.
+    """
+
+    if not thread:
+        thread_str = ''
+    else:
+        thread_str = 'thread {0}'.format(thread)
+
+    if temporary:
+        command = 'tbreak'
+        break_type = 'Temporary breakpoint'
+    else:
+        command = 'break'
+        break_type = 'Breakpoint'
+
+    line_number = str(get_line_number(file_name, string))
+
+    test('{0} {1}:{2} {3}'.format(command, file_name, line_number, thread_str),
+         r'{0} [0-9]+ at 0x[a-f0-9]+: file {1}, line {2}\.'.format(break_type,
+                                                                   file_name,
+                                                                   line_number))
+
+def continue_cmd(thread=None):
+    """Executes a gdb 'continue' command.
+
+    If 'thread' isn't None, the command will be applied to all the threads.
+    Otherwise, it'll be applied only to 'thread'.
+
+    Args:
+        thread (int): The number of the thread we'll apply the command to,
+            as seen by gdb.  If specified, it should be greater than zero.
+    """
+
+    if not thread:
+        command = 'continue'
+    else:
+        command = 'thread apply {0} continue'.format(thread)
+
+    test(command, None)
+
+def next_cmd(count=1, thread=None):
+    """Executes a gdb 'next' command.
+
+    If 'thread' isn't None, the command will be applied to all the threads.
+    Otherwise, it'll be applied only to 'thread'.
+
+    Args:
+        count (int): The 'count' argument of the 'next' command.
+        thread (int): The number of the thread we'll apply the command to,
+            as seen by gdb.  If specified, it should be greater than zero.
+    """
+
+    if not thread:
+        command = 'next'
+    else:
+        command = 'thread apply {0} next'
+
+    test('{0} {1}'.format(command, count), None)
+
+def select_thread(thread):
+    """Selects the thread indicated by 'thread'.
+
+    Args:
+        thread (int): The number of the thread we'll switch to, as seen by gdb.
+            This should be greater than zero.
+    """
+
+    if thread > 0:
+        test('thread {0}'.format(thread), None)
+
+def get_current_thread_lwpid():
+    """Gets the current thread's Lightweight Process ID.
+
+    Returns:
+        string: The current thread's LWP ID.
+    """
+
+    # It's easier to get the LWP ID through the Python API than the gdb CLI.
+    command = 'python print(gdb.selected_thread().ptid[1])'
+
+    return test(command, r'[0-9]+')
+
+def set_scheduler_locking(mode):
+    """Executes the gdb 'set scheduler-locking' command.
+
+    Args:
+        mode (bool): Whether the scheduler locking mode should be 'on'.
+    """
+    modes = {
+        True: 'on',
+        False: 'off'
+    }
+
+    test('set scheduler-locking {0}'.format(modes[mode]), None)
+
+def test_printer(var, to_string, children=None, is_ptr=True):
+    """ Tests the output of a pretty printer.
+
+    For a variable called 'var', this tests whether its associated printer
+    outputs the expected 'to_string' and children (if any).
+
+    Args:
+        var (string): The name of the variable we'll print.
+        to_string (raw string): The expected output of the printer's 'to_string'
+            method.
+        children (map {raw string->raw string}): A map with the expected output
+            of the printer's children' method.
+        is_ptr (bool): Whether 'var' is a pointer, and thus should be
+            dereferenced.
+    """
+
+    if is_ptr:
+        var = '*{0}'.format(var)
+
+    test('print {0}'.format(var), to_string)
+
+    if children:
+        for name, value in children.items():
+            # Children are shown as 'name = value'.
+            test('print {0}'.format(var), r'{0} = {1}'.format(name, value))
diff --git a/scripts/gen-py-const.awk b/scripts/gen-py-const.awk
new file mode 100644
index 0000000..4586f59
--- /dev/null
+++ b/scripts/gen-py-const.awk
@@ -0,0 +1,118 @@
+# Script to generate constants for Python pretty printers.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+# This script is a smaller version of the clever gen-asm-const.awk hack used to
+# generate ASM constants from .sym files.  We'll use this to generate constants
+# for Python pretty printers.
+#
+# The input to this script are .pysym files that look like:
+# #C_Preprocessor_Directive...
+# NAME1
+# NAME2 expression...
+#
+# A line giving just a name implies an expression consisting of just that name.
+# Comments start with '--'.
+#
+# The output of this script is a 'dummy' function containing 'asm' declarations
+# for each non-preprocessor line in the .pysym file.  The expression values
+# will appear as input operands to the 'asm' declaration.  For example, if we
+# have:
+#
+# /* header.h */
+# #define MACRO 42
+#
+# struct S {
+#     char c1;
+#     char c2;
+#     char c3;
+# };
+#
+# enum E {
+#     ZERO,
+#     ONE
+# };
+#
+# /* symbols.pysym */
+# #include <stddef.h>
+# #include "header.h"
+# -- This is a comment
+# MACRO
+# C3_OFFSET offsetof(struct S, c3)
+# E_ONE ONE
+#
+# the output will be:
+#
+# #include <stddef.h>
+# #include "header.h"
+# void dummy(void)
+# {
+#   asm ("@name@MACRO@value@%0@" : : "i" (MACRO));
+#   asm ("@name@C3_OFFSET@value@%0@" : : "i" (offsetof(struct S, c3)));
+#   asm ("@name@E_ONE@value@%0@" : : "i" (ONE));
+# }
+#
+# We'll later feed this output to gcc -S.  Since '-S' tells gcc to compile but
+# not assemble, gcc will output something like:
+#
+# dummy:
+# 	...
+# 	@name@MACRO@value@$42@
+# 	@name@C3_OFFSET@value@$2@
+# 	@name@E_ONE@value@$1@
+#
+# Finally, we can process that output to extract the constant values.
+# Notice gcc may prepend a special character such as '$' to each value.
+
+# found_symbol indicates whether we found a non-comment, non-preprocessor line.
+BEGIN { found_symbol = 0 }
+
+# C preprocessor directives go straight through.
+/^#/ { print; next; }
+
+# Skip comments.
+/--/ { next; }
+
+# Trim leading whitespace.
+{ sub(/^[[:blank:]]*/, ""); }
+
+# If we found a non-comment, non-preprocessor line, print the 'dummy' function
+# header.
+NF > 0 && !found_symbol {
+    print "void dummy(void)\n{";
+    found_symbol = 1;
+}
+
+# If the line contains just a name, duplicate it so we can use that name
+# as the value of the expression.
+NF == 1 { sub(/^.*$/, "& &"); }
+
+# If a line contains a name and an expression...
+NF > 1 {
+    name = $1;
+
+    # Remove any characters before the second field.
+    sub(/^[^[:blank:]]+[[:blank:]]+/, "");
+
+    # '$0' ends up being everything that appeared after the first field
+    # separator.
+    printf "  asm (\"@name@%s@value@%0@\" : : \"i\" (%s));\n", name, $0;
+}
+
+# Close the 'dummy' function.
+END { if (found_symbol) print "}"; }
