Message ID | 1403735086-21797-4-git-send-email-rth@twiddle.net |
---|---|

State | Superseded |

Headers | show |

OK

diff --git a/sysdeps/alpha/hp-timing.h b/sysdeps/alpha/hp-timing.h index 4cbee66..71322f9 100644 --- a/sysdeps/alpha/hp-timing.h +++ b/sysdeps/alpha/hp-timing.h @@ -51,13 +51,8 @@ - HP_TIMING_DIFF: compute difference between two times and store it in a third. Source and destination might overlap. - - HP_TIMING_ACCUM: add time difference to another variable. This might - be a bit more complicated to implement for some platforms as the - operation should be thread-safe and 64bit arithmetic on 32bit platforms - is not. - - - HP_TIMING_ACCUM_NT: this is the variant for situations where we know - there are no threads involved. + - HP_TIMING_ACCUM_NT: add time difference to another variable, without + being thread-safe. - HP_TIMING_PRINT: write decimal representation of the timing value into the given string. This operation need not be inline even though @@ -91,10 +86,6 @@ typedef unsigned int hp_timing_t; /* It's simple arithmetic for us. */ #define HP_TIMING_DIFF(Diff, Start, End) (Diff) = ((End) - (Start)) -/* ??? Don't bother, since we're only used for ld.so. */ -#define HP_TIMING_ACCUM(Sum, Diff) not implemented - -/* No threads, no extra work. */ #define HP_TIMING_ACCUM_NT(Sum, Diff) (Sum) += (Diff) /* Print the time value. */ diff --git a/sysdeps/generic/hp-timing.h b/sysdeps/generic/hp-timing.h index bf78e4e..894ab17 100644 --- a/sysdeps/generic/hp-timing.h +++ b/sysdeps/generic/hp-timing.h @@ -48,13 +48,8 @@ - HP_TIMING_DIFF: compute difference between two times and store it in a third. Source and destination might overlap. - - HP_TIMING_ACCUM: add time difference to another variable. This might - be a bit more complicated to implement for some platforms as the - operation should be thread-safe and 64bit arithmetic on 32bit platforms - is not. - - - HP_TIMING_ACCUM_NT: this is the variant for situations where we know - there are no threads involved. + - HP_TIMING_ACCUM_NT: add time difference to another variable, without + being thread-safe. - HP_TIMING_PRINT: write decimal representation of the timing value into the given string. This operation need not be inline even though @@ -69,7 +64,6 @@ typedef int hp_timing_t; #define HP_TIMING_NOW(var) #define HP_TIMING_DIFF_INIT() #define HP_TIMING_DIFF(Diff, Start, End) -#define HP_TIMING_ACCUM(Sum, Diff) #define HP_TIMING_ACCUM_NT(Sum, Diff) #define HP_TIMING_PRINT(Buf, Len, Val) diff --git a/sysdeps/i386/i686/hp-timing.h b/sysdeps/i386/i686/hp-timing.h index 18e5b95..a4b19c1 100644 --- a/sysdeps/i386/i686/hp-timing.h +++ b/sysdeps/i386/i686/hp-timing.h @@ -58,13 +58,8 @@ - HP_TIMING_DIFF: compute difference between two times and store it in a third. Source and destination might overlap. - - HP_TIMING_ACCUM: add time difference to another variable. This might - be a bit more complicated to implement for some platforms as the - operation should be thread-safe and 64bit arithmetic on 32bit platforms - is not. - - - HP_TIMING_ACCUM_NT: this is the variant for situations where we know - there are no threads involved. + - HP_TIMING_ACCUM_NT: add time difference to another variable, without + being thread-safe. - HP_TIMING_PRINT: write decimal representation of the timing value into the given string. This operation need not be inline even though @@ -110,30 +105,6 @@ typedef unsigned long long int hp_timing_t; /* It's simple arithmetic for us. */ #define HP_TIMING_DIFF(Diff, Start, End) (Diff) = ((End) - (Start)) -/* We have to jump through hoops to get this correctly implemented. */ -#define HP_TIMING_ACCUM(Sum, Diff) \ - do { \ - int __not_done; \ - hp_timing_t __oldval = (Sum); \ - hp_timing_t __diff = (Diff) - GLRO(dl_hp_timing_overhead); \ - do \ - { \ - hp_timing_t __newval = __oldval + __diff; \ - int __temp0, __temp1; \ - __asm__ __volatile__ ("xchgl %0, %%ebx\n\t" \ - "lock; cmpxchg8b %1\n\t" \ - "sete %%bl\n\t" \ - "xchgl %0, %%ebx" \ - : "=SD" (__not_done), "=m" (Sum), \ - "=A" (__oldval), "=c" (__temp0) \ - : "m" (Sum), "2" (__oldval), \ - "3" ((unsigned int) (__newval >> 32)), \ - "0" ((unsigned int) __newval)); \ - } \ - while ((unsigned char) __not_done); \ - } while (0) - -/* No threads, no extra work. */ #define HP_TIMING_ACCUM_NT(Sum, Diff) (Sum) += (Diff) /* Print the time value. */ diff --git a/sysdeps/ia64/hp-timing.h b/sysdeps/ia64/hp-timing.h index e91326c..ccc49e6 100644 --- a/sysdeps/ia64/hp-timing.h +++ b/sysdeps/ia64/hp-timing.h @@ -52,13 +52,8 @@ - HP_TIMING_DIFF: compute difference between two times and store it in a third. Source and destination might overlap. - - HP_TIMING_ACCUM: add time difference to another variable. This might - be a bit more complicated to implement for some platforms as the - operation should be thread-safe and 64bit arithmetic on 32bit platforms - is not. - - - HP_TIMING_ACCUM_NT: this is the variant for situations where we know - there are no threads involved. + - HP_TIMING_ACCUM_NT: add time difference to another variable, without + being thread-safe. - HP_TIMING_PRINT: write decimal representation of the timing value into the given string. This operation need not be inline even though @@ -108,21 +103,6 @@ typedef unsigned long int hp_timing_t; /* It's simple arithmetic for us. */ #define HP_TIMING_DIFF(Diff, Start, End) (Diff) = ((End) - (Start)) -/* We have to jump through hoops to get this correctly implemented. */ -#define HP_TIMING_ACCUM(Sum, Diff) \ - do { \ - hp_timing_t __oldval; \ - hp_timing_t __diff = (Diff) - GLRO(dl_hp_timing_overhead); \ - hp_timing_t __newval; \ - do \ - { \ - __oldval = (Sum); \ - __newval = __oldval + __diff; \ - } \ - while (! __sync_bool_compare_and_swap (&Sum, __oldvar, __newval)); \ - } while (0) - -/* No threads, no extra work. */ #define HP_TIMING_ACCUM_NT(Sum, Diff) (Sum) += (Diff) /* Print the time value. */ diff --git a/sysdeps/powerpc/powerpc32/power4/hp-timing.h b/sysdeps/powerpc/powerpc32/power4/hp-timing.h index 2124e02..cd296c5 100644 --- a/sysdeps/powerpc/powerpc32/power4/hp-timing.h +++ b/sysdeps/powerpc/powerpc32/power4/hp-timing.h @@ -51,13 +51,8 @@ - HP_TIMING_DIFF: compute difference between two times and store it in a third. Source and destination might overlap. - - HP_TIMING_ACCUM: add time difference to another variable. This might - be a bit more complicated to implement for some platforms as the - operation should be thread-safe and 64bit arithmetic on 32bit platforms - is not. - - - HP_TIMING_ACCUM_NT: this is the variant for situations where we know - there are no threads involved. + - HP_TIMING_ACCUM_NT: add time difference to another variable, without + being thread-safe. - HP_TIMING_PRINT: write decimal representation of the timing value into the given string. This operation need not be inline even though @@ -117,15 +112,6 @@ typedef unsigned long long int hp_timing_t; /* It's simple arithmetic in 64-bit. */ #define HP_TIMING_DIFF(Diff, Start, End) (Diff) = ((End) - (Start)) -/* We need to insure that this add is atomic in threaded environments. We use - __arch_atomic_exchange_and_add_64 from atomic.h to get thread safety. */ -#define HP_TIMING_ACCUM(Sum, Diff) \ - do { \ - hp_timing_t __diff = (Diff) - GLRO(dl_hp_timing_overhead); \ - __arch_atomic_exchange_and_add_64 (&(Sum), __diff); \ - } while (0) - -/* No threads, no extra work. */ #define HP_TIMING_ACCUM_NT(Sum, Diff) (Sum) += (Diff) /* Print the time value. */ diff --git a/sysdeps/powerpc/powerpc64/hp-timing.h b/sysdeps/powerpc/powerpc64/hp-timing.h index c773541..4cad90a 100644 --- a/sysdeps/powerpc/powerpc64/hp-timing.h +++ b/sysdeps/powerpc/powerpc64/hp-timing.h @@ -51,13 +51,8 @@ - HP_TIMING_DIFF: compute difference between two times and store it in a third. Source and destination might overlap. - - HP_TIMING_ACCUM: add time difference to another variable. This might - be a bit more complicated to implement for some platforms as the - operation should be thread-safe and 64bit arithmetic on 32bit platforms - is not. - - - HP_TIMING_ACCUM_NT: this is the variant for situations where we know - there are no threads involved. + - HP_TIMING_ACCUM_NT: add time difference to another variable, without + being thread-safe. - HP_TIMING_PRINT: write decimal representation of the timing value into the given string. This operation need not be inline even though @@ -108,15 +103,6 @@ typedef unsigned long long int hp_timing_t; /* It's simple arithmetic in 64-bit. */ #define HP_TIMING_DIFF(Diff, Start, End) (Diff) = ((End) - (Start)) -/* We need to insure that this add is atomic in threaded environments. We use - __arch_atomic_exchange_and_add_64 from atomic.h to get thread safety. */ -#define HP_TIMING_ACCUM(Sum, Diff) \ - do { \ - hp_timing_t __diff = (Diff) - GLRO(dl_hp_timing_overhead); \ - __arch_atomic_exchange_and_add_64 (&(Sum), __diff); \ - } while (0) - -/* No threads, no extra work. */ #define HP_TIMING_ACCUM_NT(Sum, Diff) (Sum) += (Diff) /* Print the time value. */ diff --git a/sysdeps/sparc/sparc32/sparcv9/hp-timing.h b/sysdeps/sparc/sparc32/sparcv9/hp-timing.h index fbfb861..c3be1ca 100644 --- a/sysdeps/sparc/sparc32/sparcv9/hp-timing.h +++ b/sysdeps/sparc/sparc32/sparcv9/hp-timing.h @@ -51,23 +51,6 @@ typedef unsigned long long int hp_timing_t; #define HP_TIMING_DIFF(Diff, Start, End) (Diff) = ((End) - (Start)) -#define HP_TIMING_ACCUM(Sum, Diff) \ -do { \ - hp_timing_t __diff = (Diff) - GLRO(dl_hp_timing_overhead); \ - __asm__ __volatile__("srl %L0, 0, %%g1\n\t" \ - "sllx %H0, 32, %%g6\n\t" \ - "or %%g1, %%g6, %%g1\n\t" \ - "1: ldx [%1], %%g5\n\t" \ - "add %%g5, %%g1, %%g6\n\t" \ - "casx [%1], %%g5, %%g6\n\t" \ - "cmp %%g5, %%g6\n\t" \ - "bne,pn %%xcc, 1b\n\t" \ - " nop" \ - : /* no outputs */ \ - : "r" (__diff), "r" (&(Sum)) \ - : "memory", "g1", "g5", "g6"); \ -} while(0) - #define HP_TIMING_ACCUM_NT(Sum, Diff) (Sum) += (Diff) #define HP_TIMING_PRINT(Buf, Len, Val) \ diff --git a/sysdeps/sparc/sparc64/hp-timing.h b/sysdeps/sparc/sparc64/hp-timing.h index 0773efb..9e49b78 100644 --- a/sysdeps/sparc/sparc64/hp-timing.h +++ b/sysdeps/sparc/sparc64/hp-timing.h @@ -48,21 +48,6 @@ typedef unsigned long int hp_timing_t; #define HP_TIMING_DIFF(Diff, Start, End) (Diff) = ((End) - (Start)) -#define HP_TIMING_ACCUM(Sum, Diff) \ -do { \ - hp_timing_t __diff = (Diff) - GLRO(dl_hp_timing_overhead); \ - hp_timing_t tmp1, tmp2; \ - __asm__ __volatile__("1: ldx [%3], %0\n\t" \ - "add %0, %2, %1\n\t" \ - "casx [%3], %0, %1\n\t" \ - "cmp %0, %1\n\t" \ - "bne,pn %%xcc, 1b\n\t" \ - " nop" \ - : "=&r" (tmp1), "=&r" (tmp2) \ - : "r" (__diff), "r" (&(Sum)) \ - : "memory", "g1", "g5", "g6"); \ -} while(0) - #define HP_TIMING_ACCUM_NT(Sum, Diff) (Sum) += (Diff) #define HP_TIMING_PRINT(Buf, Len, Val) \ diff --git a/sysdeps/x86_64/hp-timing.h b/sysdeps/x86_64/hp-timing.h index d88206c..e132dac 100644 --- a/sysdeps/x86_64/hp-timing.h +++ b/sysdeps/x86_64/hp-timing.h @@ -28,13 +28,4 @@ asm volatile ("rdtsc" : "=a" (_lo), "=d" (_hi)); \ (Var) = ((unsigned long long int) _hi << 32) | _lo; }) -/* The funny business for 32-bit mode is not required here. */ -# undef HP_TIMING_ACCUM -# define HP_TIMING_ACCUM(Sum, Diff) \ - do { \ - hp_timing_t __diff = (Diff) - GLRO(dl_hp_timing_overhead); \ - __asm__ __volatile__ ("lock; addq %1, %0" \ - : "=m" (Sum) : "r" (__diff), "m" (Sum)); \ - } while (0) - #endif /* hp-timing.h */