Patchwork [pushed] Add no-dist to gnulib configure

login
register
mail settings
Submitter Simon Marchi (Code Review)
Date Nov. 15, 2019, 9:17 p.m.
Message ID <20191115211707.07AA528171@gnutoolchain-gerrit.osci.io>
Download mbox | patch
Permalink /patch/35961/
State New
Headers show

Comments

Simon Marchi (Code Review) - Nov. 15, 2019, 9:17 p.m.
Sourceware to Gerrit sync has submitted this change.

Change URL: https://gnutoolchain-gerrit.osci.io/r/c/binutils-gdb/+/659
......................................................................

Add no-dist to gnulib configure

This adds the no-dist option to the gnulib configure script.  gdb
doesn't use "make dist", so there's no need for this.  Adding this
option makes the Makefiles less verbose.

gnulib/ChangeLog
2019-11-15  Tom Tromey  <tromey@adacore.com>

	* aclocal.m4, configure, Makefile.in, import/Makefile.in:
	Rebuild.
	* configure.ac: Remove obsolete comment.  Add no-dist.

Change-Id: I5224e18af9acd5284acb79d5756b0e84b00406e9
---
M gnulib/ChangeLog
M gnulib/Makefile.in
M gnulib/aclocal.m4
M gnulib/configure
M gnulib/configure.ac
M gnulib/import/Makefile.in
6 files changed, 25 insertions(+), 818 deletions(-)

Approvals:
  Simon Marchi: Looks good to me, approved

Patch

diff --git a/gnulib/ChangeLog b/gnulib/ChangeLog
index 8c88bbc..f718009 100644
--- a/gnulib/ChangeLog
+++ b/gnulib/ChangeLog
@@ -1,3 +1,9 @@ 
+2019-11-15  Tom Tromey  <tromey@adacore.com>
+
+	* aclocal.m4, configure, Makefile.in, import/Makefile.in:
+	Rebuild.
+	* configure.ac: Remove obsolete comment.  Add no-dist.
+
 2019-11-15  Christian Biesinger  <cbiesinger@google.com>
 
 	* Makefile.in: Regenerate.
diff --git a/gnulib/Makefile.in b/gnulib/Makefile.in
index 46c3ece..dbe79ed 100644
--- a/gnulib/Makefile.in
+++ b/gnulib/Makefile.in
@@ -254,7 +254,7 @@ 
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
-	$(am__configure_deps) $(am__DIST_COMMON)
+	$(am__configure_deps)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
@@ -274,7 +274,6 @@ 
 am__v_at_0 = @
 am__v_at_1 = 
 SOURCES =
-DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 	ctags-recursive dvi-recursive html-recursive info-recursive \
 	install-data-recursive install-dvi-recursive \
@@ -295,7 +294,7 @@ 
   $(RECURSIVE_CLEAN_TARGETS) \
   $(am__extra_recursive_targets)
 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	cscope distdir dist dist-all distcheck
+	cscope
 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
 	$(LISP)config.in
 # Read a list of newline-separated strings from the standard input,
@@ -318,57 +317,6 @@ 
 CTAGS = ctags
 CSCOPE = cscope
 DIST_SUBDIRS = $(SUBDIRS)
-am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.in \
-	$(top_srcdir)/../ar-lib $(top_srcdir)/../compile \
-	$(top_srcdir)/../config.guess $(top_srcdir)/../config.rpath \
-	$(top_srcdir)/../config.sub $(top_srcdir)/../install-sh \
-	$(top_srcdir)/../missing $(top_srcdir)/../mkinstalldirs \
-	../COPYING ../COPYING.LIB ../ChangeLog ../README ../ar-lib \
-	../compile ../config.guess ../config.rpath ../config.sub \
-	../depcomp ../install-sh ../ltmain.sh ../missing \
-	../mkinstalldirs ../ylwrap ChangeLog README
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-DIST_TARGETS = dist-gzip
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
 pkglibexecdir = @pkglibexecdir@
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
@@ -1655,195 +1603,6 @@ 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
-	$(am__post_remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__post_remove_distdir)
-
-dist-lzip: distdir
-	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__post_remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__post_remove_distdir)
-
-dist-tarZ: distdir
-	@echo WARNING: "Support for distribution archives compressed with" \
-		       "legacy program 'compress' is deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__post_remove_distdir)
-
-dist-shar: distdir
-	@echo WARNING: "Support for shar distribution archives is" \
-	               "deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
-	$(am__post_remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__post_remove_distdir)
-
-dist dist-all:
-	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
-	$(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lz*) \
-	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir)
-	chmod u+w $(distdir)
-	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build/sub \
-	  && ../../configure \
-	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	    --srcdir=../.. --prefix="$$dc_install_base" \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__post_remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@test -n '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: trying to run $@ with an empty' \
-	       '$$(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	$(am__cd) '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
 check-am: all-am
 check: check-recursive
 all-am: Makefile config.h
@@ -1952,19 +1711,16 @@ 
 
 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
 	am--refresh check check-am clean clean-cscope clean-generic \
-	cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
-	dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
-	distcheck distclean distclean-generic distclean-hdr \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
-	uninstall-am
+	cscope cscopelist-am ctags ctags-am distclean \
+	distclean-generic distclean-hdr distclean-tags dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags tags-am uninstall uninstall-am
 
 .PRECIOUS: Makefile
 
diff --git a/gnulib/aclocal.m4 b/gnulib/aclocal.m4
index 8f2ddae..5234e94 100644
--- a/gnulib/aclocal.m4
+++ b/gnulib/aclocal.m4
@@ -20,460 +20,6 @@ 
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically 'autoreconf'.])])
 
-# po.m4 serial 24 (gettext-0.19)
-dnl Copyright (C) 1995-2014, 2016 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-
-AC_PREREQ([2.60])
-
-dnl Checks for all prerequisites of the po subdirectory.
-AC_DEFUN([AM_PO_SUBDIRS],
-[
-  AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-  AC_REQUIRE([AC_PROG_INSTALL])dnl
-  AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-  AC_REQUIRE([AC_PROG_SED])dnl
-  AC_REQUIRE([AM_NLS])dnl
-
-  dnl Release version of the gettext macros. This is used to ensure that
-  dnl the gettext macros and po/Makefile.in.in are in sync.
-  AC_SUBST([GETTEXT_MACRO_VERSION], [0.19])
-
-  dnl Perform the following tests also if --disable-nls has been given,
-  dnl because they are needed for "make dist" to work.
-
-  dnl Search for GNU msgfmt in the PATH.
-  dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
-  dnl The second test excludes FreeBSD msgfmt.
-  AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-    [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
-     (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
-    :)
-  AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
-
-  dnl Test whether it is GNU msgfmt >= 0.15.
-changequote(,)dnl
-  case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
-    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
-    *) MSGFMT_015=$MSGFMT ;;
-  esac
-changequote([,])dnl
-  AC_SUBST([MSGFMT_015])
-changequote(,)dnl
-  case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
-    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
-    *) GMSGFMT_015=$GMSGFMT ;;
-  esac
-changequote([,])dnl
-  AC_SUBST([GMSGFMT_015])
-
-  dnl Search for GNU xgettext 0.12 or newer in the PATH.
-  dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
-  dnl The second test excludes FreeBSD xgettext.
-  AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-    [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
-     (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
-    :)
-  dnl Remove leftover from FreeBSD xgettext call.
-  rm -f messages.po
-
-  dnl Test whether it is GNU xgettext >= 0.15.
-changequote(,)dnl
-  case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
-    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
-    *) XGETTEXT_015=$XGETTEXT ;;
-  esac
-changequote([,])dnl
-  AC_SUBST([XGETTEXT_015])
-
-  dnl Search for GNU msgmerge 0.11 or newer in the PATH.
-  AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
-    [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
-
-  dnl Installation directories.
-  dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
-  dnl have to define it here, so that it can be used in po/Makefile.
-  test -n "$localedir" || localedir='${datadir}/locale'
-  AC_SUBST([localedir])
-
-  dnl Support for AM_XGETTEXT_OPTION.
-  test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
-  AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
-
-  AC_CONFIG_COMMANDS([po-directories], [[
-    for ac_file in $CONFIG_FILES; do
-      # Support "outfile[:infile[:infile...]]"
-      case "$ac_file" in
-        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-      esac
-      # PO directories have a Makefile.in generated from Makefile.in.in.
-      case "$ac_file" in */Makefile.in)
-        # Adjust a relative srcdir.
-        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
-        ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
-        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
-        # In autoconf-2.13 it is called $ac_given_srcdir.
-        # In autoconf-2.50 it is called $srcdir.
-        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
-        case "$ac_given_srcdir" in
-          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
-          /*) top_srcdir="$ac_given_srcdir" ;;
-          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
-        esac
-        # Treat a directory as a PO directory if and only if it has a
-        # POTFILES.in file. This allows packages to have multiple PO
-        # directories under different names or in different locations.
-        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
-          rm -f "$ac_dir/POTFILES"
-          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
-          gt_tab=`printf '\t'`
-          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
-          POMAKEFILEDEPS="POTFILES.in"
-          # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
-          # on $ac_dir but don't depend on user-specified configuration
-          # parameters.
-          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
-            # The LINGUAS file contains the set of available languages.
-            if test -n "$OBSOLETE_ALL_LINGUAS"; then
-              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
-            fi
-            ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
-            # Hide the ALL_LINGUAS assignment from automake < 1.5.
-            eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
-            POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
-          else
-            # The set of available languages was given in configure.in.
-            # Hide the ALL_LINGUAS assignment from automake < 1.5.
-            eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
-          fi
-          # Compute POFILES
-          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
-          # Compute UPDATEPOFILES
-          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
-          # Compute DUMMYPOFILES
-          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
-          # Compute GMOFILES
-          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
-          case "$ac_given_srcdir" in
-            .) srcdirpre= ;;
-            *) srcdirpre='$(srcdir)/' ;;
-          esac
-          POFILES=
-          UPDATEPOFILES=
-          DUMMYPOFILES=
-          GMOFILES=
-          for lang in $ALL_LINGUAS; do
-            POFILES="$POFILES $srcdirpre$lang.po"
-            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
-            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
-            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
-          done
-          # CATALOGS depends on both $ac_dir and the user's LINGUAS
-          # environment variable.
-          INST_LINGUAS=
-          if test -n "$ALL_LINGUAS"; then
-            for presentlang in $ALL_LINGUAS; do
-              useit=no
-              if test "%UNSET%" != "$LINGUAS"; then
-                desiredlanguages="$LINGUAS"
-              else
-                desiredlanguages="$ALL_LINGUAS"
-              fi
-              for desiredlang in $desiredlanguages; do
-                # Use the presentlang catalog if desiredlang is
-                #   a. equal to presentlang, or
-                #   b. a variant of presentlang (because in this case,
-                #      presentlang can be used as a fallback for messages
-                #      which are not translated in the desiredlang catalog).
-                case "$desiredlang" in
-                  "$presentlang"*) useit=yes;;
-                esac
-              done
-              if test $useit = yes; then
-                INST_LINGUAS="$INST_LINGUAS $presentlang"
-              fi
-            done
-          fi
-          CATALOGS=
-          if test -n "$INST_LINGUAS"; then
-            for lang in $INST_LINGUAS; do
-              CATALOGS="$CATALOGS $lang.gmo"
-            done
-          fi
-          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
-          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
-          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
-            if test -f "$f"; then
-              case "$f" in
-                *.orig | *.bak | *~) ;;
-                *) cat "$f" >> "$ac_dir/Makefile" ;;
-              esac
-            fi
-          done
-        fi
-        ;;
-      esac
-    done]],
-   [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
-    # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
-    # from automake < 1.5.
-    eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
-    # Capture the value of LINGUAS because we need it to compute CATALOGS.
-    LINGUAS="${LINGUAS-%UNSET%}"
-   ])
-])
-
-dnl Postprocesses a Makefile in a directory containing PO files.
-AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
-[
-  # When this code is run, in config.status, two variables have already been
-  # set:
-  # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
-  # - LINGUAS is the value of the environment variable LINGUAS at configure
-  #   time.
-
-changequote(,)dnl
-  # Adjust a relative srcdir.
-  ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
-  ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
-  ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
-  # In autoconf-2.13 it is called $ac_given_srcdir.
-  # In autoconf-2.50 it is called $srcdir.
-  test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
-  case "$ac_given_srcdir" in
-    .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
-    /*) top_srcdir="$ac_given_srcdir" ;;
-    *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  # Find a way to echo strings without interpreting backslash.
-  if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
-    gt_echo='echo'
-  else
-    if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
-      gt_echo='printf %s\n'
-    else
-      echo_func () {
-        cat <<EOT
-$*
-EOT
-      }
-      gt_echo='echo_func'
-    fi
-  fi
-
-  # A sed script that extracts the value of VARIABLE from a Makefile.
-  tab=`printf '\t'`
-  sed_x_variable='
-# Test if the hold space is empty.
-x
-s/P/P/
-x
-ta
-# Yes it was empty. Look if we have the expected variable definition.
-/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{
-  # Seen the first line of the variable definition.
-  s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=//
-  ba
-}
-bd
-:a
-# Here we are processing a line from the variable definition.
-# Remove comment, more precisely replace it with a space.
-s/#.*$/ /
-# See if the line ends in a backslash.
-tb
-:b
-s/\\$//
-# Print the line, without the trailing backslash.
-p
-tc
-# There was no trailing backslash. The end of the variable definition is
-# reached. Clear the hold space.
-s/^.*$//
-x
-bd
-:c
-# A trailing backslash means that the variable definition continues in the
-# next line. Put a nonempty string into the hold space to indicate this.
-s/^.*$/P/
-x
-:d
-'
-changequote([,])dnl
-
-  # Set POTFILES to the value of the Makefile variable POTFILES.
-  sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
-  POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
-  # Compute POTFILES_DEPS as
-  #   $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
-  POTFILES_DEPS=
-  for file in $POTFILES; do
-    POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
-  done
-  POMAKEFILEDEPS=""
-
-  if test -n "$OBSOLETE_ALL_LINGUAS"; then
-    test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
-  fi
-  if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
-    # The LINGUAS file contains the set of available languages.
-    ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
-    POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
-  else
-    # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
-    sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
-    ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
-  fi
-  # Hide the ALL_LINGUAS assignment from automake < 1.5.
-  eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
-  # Compute POFILES
-  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
-  # Compute UPDATEPOFILES
-  # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
-  # Compute DUMMYPOFILES
-  # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
-  # Compute GMOFILES
-  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
-  # Compute PROPERTIESFILES
-  # as      $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
-  # Compute CLASSFILES
-  # as      $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
-  # Compute QMFILES
-  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
-  # Compute MSGFILES
-  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
-  # Compute RESOURCESDLLFILES
-  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
-  case "$ac_given_srcdir" in
-    .) srcdirpre= ;;
-    *) srcdirpre='$(srcdir)/' ;;
-  esac
-  POFILES=
-  UPDATEPOFILES=
-  DUMMYPOFILES=
-  GMOFILES=
-  PROPERTIESFILES=
-  CLASSFILES=
-  QMFILES=
-  MSGFILES=
-  RESOURCESDLLFILES=
-  for lang in $ALL_LINGUAS; do
-    POFILES="$POFILES $srcdirpre$lang.po"
-    UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
-    DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
-    GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
-    PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
-    CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
-    QMFILES="$QMFILES $srcdirpre$lang.qm"
-    frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
-    MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
-    frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
-    RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
-  done
-  # CATALOGS depends on both $ac_dir and the user's LINGUAS
-  # environment variable.
-  INST_LINGUAS=
-  if test -n "$ALL_LINGUAS"; then
-    for presentlang in $ALL_LINGUAS; do
-      useit=no
-      if test "%UNSET%" != "$LINGUAS"; then
-        desiredlanguages="$LINGUAS"
-      else
-        desiredlanguages="$ALL_LINGUAS"
-      fi
-      for desiredlang in $desiredlanguages; do
-        # Use the presentlang catalog if desiredlang is
-        #   a. equal to presentlang, or
-        #   b. a variant of presentlang (because in this case,
-        #      presentlang can be used as a fallback for messages
-        #      which are not translated in the desiredlang catalog).
-        case "$desiredlang" in
-          "$presentlang"*) useit=yes;;
-        esac
-      done
-      if test $useit = yes; then
-        INST_LINGUAS="$INST_LINGUAS $presentlang"
-      fi
-    done
-  fi
-  CATALOGS=
-  JAVACATALOGS=
-  QTCATALOGS=
-  TCLCATALOGS=
-  CSHARPCATALOGS=
-  if test -n "$INST_LINGUAS"; then
-    for lang in $INST_LINGUAS; do
-      CATALOGS="$CATALOGS $lang.gmo"
-      JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
-      QTCATALOGS="$QTCATALOGS $lang.qm"
-      frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
-      TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
-      frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
-      CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
-    done
-  fi
-
-  sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
-  tab=`printf '\t'`
-  if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
-    # Add dependencies that cannot be formulated as a simple suffix rule.
-    for lang in $ALL_LINGUAS; do
-      frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
-      cat >> "$ac_file.tmp" <<EOF
-$frobbedlang.msg: $lang.po
-${tab}@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
-${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-EOF
-    done
-  fi
-  if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
-    # Add dependencies that cannot be formulated as a simple suffix rule.
-    for lang in $ALL_LINGUAS; do
-      frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
-      cat >> "$ac_file.tmp" <<EOF
-$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
-${tab}@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
-${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-EOF
-    done
-  fi
-  if test -n "$POMAKEFILEDEPS"; then
-    cat >> "$ac_file.tmp" <<EOF
-Makefile: $POMAKEFILEDEPS
-EOF
-  fi
-  mv "$ac_file.tmp" "$ac_file"
-])
-
-dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
-AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
-[
-  XGETTEXT_EXTRA_OPTIONS=
-])
-
-dnl Registers an option to be passed to xgettext in the po subdirectory.
-AC_DEFUN([AM_XGETTEXT_OPTION],
-[
-  AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
-  XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
-])
-
 # Copyright (C) 2002-2017 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
diff --git a/gnulib/configure b/gnulib/configure
index 94d9ff9..7c74371 100644
--- a/gnulib/configure
+++ b/gnulib/configure
@@ -8450,9 +8450,6 @@ 
 
 
 
-  XGETTEXT_EXTRA_OPTIONS=
-
-
 
 
 
@@ -17589,13 +17586,6 @@ 
   fi
 
 
-  XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS --flag=error:3:c-format"
-
-
-
-  XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS --flag=error_at_line:5:c-format"
-
-
 
 
 
@@ -28021,8 +28011,6 @@ 
 
 
 
-# We don't use automake, but gnulib does.  This line lets us generate
-# its Makefile.in.
 am__api_version='1.15'
 
 # Find a good install program.  We prefer a C program (faster),
diff --git a/gnulib/configure.ac b/gnulib/configure.ac
index fac7f6c..f969c84 100644
--- a/gnulib/configure.ac
+++ b/gnulib/configure.ac
@@ -37,9 +37,7 @@ 
 
 gl_INIT
 
-# We don't use automake, but gnulib does.  This line lets us generate
-# its Makefile.in.
-AM_INIT_AUTOMAKE([no-define foreign])
+AM_INIT_AUTOMAKE([no-define no-dist foreign])
 
 AM_SILENT_RULES([yes])
 
diff --git a/gnulib/import/Makefile.in b/gnulib/import/Makefile.in
index 5dc96e1..ba3207c 100644
--- a/gnulib/import/Makefile.in
+++ b/gnulib/import/Makefile.in
@@ -262,8 +262,7 @@ 
 	$(top_srcdir)/import/m4/wint_t.m4 $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \
-	$(am__DIST_COMMON)
+DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS)
 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
@@ -318,7 +317,6 @@ 
 am__v_CCLD_0 = @echo "  CCLD    " $@;
 am__v_CCLD_1 = 
 SOURCES = $(libgnu_a_SOURCES) $(EXTRA_libgnu_a_SOURCES)
-DIST_SOURCES = $(libgnu_a_SOURCES) $(EXTRA_libgnu_a_SOURCES)
 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 	ctags-recursive dvi-recursive html-recursive info-recursive \
 	install-data-recursive install-dvi-recursive \
@@ -339,8 +337,7 @@ 
   $(RECURSIVE_TARGETS) \
   $(RECURSIVE_CLEAN_TARGETS) \
   $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	distdir
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS
 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 # Read a list of newline-separated strings from the standard input,
 # and print each of them once, without duplicates.  Input order is
@@ -361,34 +358,6 @@ 
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
-am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/../depcomp \
-	$(top_srcdir)/../mkinstalldirs alloca.c
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
 pkglibexecdir = @pkglibexecdir@
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
@@ -1913,62 +1882,6 @@ 
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
 check-am: all-am
 check: $(BUILT_SOURCES)
 	$(MAKE) $(AM_MAKEFLAGS) check-recursive
@@ -2090,10 +2003,10 @@ 
 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
 	check check-am clean clean-generic clean-noinstLIBRARIES \
 	clean-noinstLTLIBRARIES cscopelist-am ctags ctags-am distclean \
-	distclean-compile distclean-generic distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-exec-local install-html \
+	distclean-compile distclean-generic distclean-tags dvi dvi-am \
+	html html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-exec-local install-html \
 	install-html-am install-info install-info-am install-man \
 	install-pdf install-pdf-am install-ps install-ps-am \
 	install-strip installcheck installcheck-am installdirs \