[v10,1/3] Y2038: provide size of default time_t for target architecture
Commit Message
To determine whether the default time_t interfaces are 32-bit
and so need conversions, or are 64-bit and so are compatible
with the internal 64-bit type without conversions, a macro
giving the size of the default time_t is also required.
This macro is called __TIMESIZE.
This macro can then be used instead of __WORDSIZE in msq-pad.h
files, which in turn allows removing the x86 variant of them.
This patch was tested by running 'make check' on branch master
then applying this patch and running 'make check' again, and
checking that both 'make check' yield identical results.
This was done on x86_64-linux-gnu and i686-linux-gnu.
* bits/timesize.h: New file.
* sysdeps/unix/sysv/linux/bits/msq-pad.h: Replace __WORDSIZE with __TIMESIZE.
* sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/msq-pad.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h: Likewise.
* sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Delete file.
* sysdeps/unix/sysv/linux/x86/bits/timesize.h: New file.
---
bits/timesize.h | 22 +++++++++++++++++++
sysdeps/unix/sysv/linux/bits/msq-pad.h | 4 ++--
sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h | 4 ++--
sysdeps/unix/sysv/linux/mips/bits/msq-pad.h | 6 ++---
.../unix/sysv/linux/powerpc/bits/msq-pad.h | 4 ++--
sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h | 4 ++--
.../linux/x86/bits/{msq-pad.h => timesize.h} | 15 +++++--------
7 files changed, 39 insertions(+), 20 deletions(-)
create mode 100644 bits/timesize.h
rename sysdeps/unix/sysv/linux/x86/bits/{msq-pad.h => timesize.h} (74%)
Comments
On Fri, 12 Oct 2018, Albert ARIBAUD (3ADEV) wrote:
> This macro can then be used instead of __WORDSIZE in msq-pad.h
> files, which in turn allows removing the x86 variant of them.
Note that the same should now be done for bits/shm-pad.h files as well.
This patch is missing changes to a Makefile to install bits/timesize.h.
Any change adding an installed header included from other installed
headers needs to include the relevant Makefile changes to avoid breaking
builds with installed glibc; you can't defer those changes to a later
patch to combine them with the installation of another header.
Hi Joseph,
On Wed, 17 Oct 2018 12:02:55 +0000, Joseph Myers
<joseph@codesourcery.com> wrote :
> On Fri, 12 Oct 2018, Albert ARIBAUD (3ADEV) wrote:
>
> > This macro can then be used instead of __WORDSIZE in msq-pad.h
> > files, which in turn allows removing the x86 variant of them.
>
> Note that the same should now be done for bits/shm-pad.h files as well.
Ditto for sem-pad.h files too, I assume.
> This patch is missing changes to a Makefile to install bits/timesize.h.
> Any change adding an installed header included from other installed
> headers needs to include the relevant Makefile changes to avoid breaking
> builds with installed glibc; you can't defer those changes to a later
> patch to combine them with the installation of another header.
Added.
Cordialement,
Albert ARIBAUD
3ADEV
On Thu, 18 Oct 2018, Albert ARIBAUD wrote:
> Hi Joseph,
>
> On Wed, 17 Oct 2018 12:02:55 +0000, Joseph Myers
> <joseph@codesourcery.com> wrote :
>
> > On Fri, 12 Oct 2018, Albert ARIBAUD (3ADEV) wrote:
> >
> > > This macro can then be used instead of __WORDSIZE in msq-pad.h
> > > files, which in turn allows removing the x86 variant of them.
> >
> > Note that the same should now be done for bits/shm-pad.h files as well.
>
> Ditto for sem-pad.h files too, I assume.
No, not for sem-pad.h (or at least, you can't remove the x86 variant of
sem-pad.h). The padding is present for both x86_64 ABIs in semid_ds.
On Thu, 18 Oct 2018 19:27:17 +0000, Joseph Myers
<joseph@codesourcery.com> wrote :
> On Thu, 18 Oct 2018, Albert ARIBAUD wrote:
>
> > Hi Joseph,
> >
> > On Wed, 17 Oct 2018 12:02:55 +0000, Joseph Myers
> > <joseph@codesourcery.com> wrote :
> >
> > > On Fri, 12 Oct 2018, Albert ARIBAUD (3ADEV) wrote:
> > >
> [...]
> > >
> > > Note that the same should now be done for bits/shm-pad.h files as well.
> >
> > Ditto for sem-pad.h files too, I assume.
>
> No, not for sem-pad.h (or at least, you can't remove the x86 variant of
> sem-pad.h). The padding is present for both x86_64 ABIs in semid_ds.
But should I not switch from __WORDSIZE to __TIMESIZE in sem-pad.h files
at least for the sake of homogeneity?
Cordialement,
Albert ARIBAUD
3ADEV
On Thu, 18 Oct 2018, Albert ARIBAUD wrote:
> > > Ditto for sem-pad.h files too, I assume.
> >
> > No, not for sem-pad.h (or at least, you can't remove the x86 variant of
> > sem-pad.h). The padding is present for both x86_64 ABIs in semid_ds.
>
> But should I not switch from __WORDSIZE to __TIMESIZE in sem-pad.h files
> at least for the sake of homogeneity?
You could (given that x86 has its own version not using __WORDSIZE, which
needs to stay).
new file mode 100644
@@ -0,0 +1,22 @@
+/* Bit size of the time_t type at glibc build time, general case.
+ Copyright (C) 2018 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+#include <bits/wordsize.h>
+
+/* Size in bits of the 'time_t' type of the default ABI. */
+#define __TIMESIZE __WORDSIZE
@@ -20,12 +20,12 @@
# error "Never use <bits/msq-pad.h> directly; include <sys/msg.h> instead."
#endif
-#include <bits/wordsize.h>
+#include <bits/timesize.h>
/* On most architectures, padding goes after time fields for 32-bit
systems and is omitted for 64-bit systems. Some architectures pad
before time fields instead, or omit padding despite being
32-bit. */
-#define __MSQ_PAD_AFTER_TIME (__WORDSIZE == 32)
+#define __MSQ_PAD_AFTER_TIME (__TIMESIZE == 32)
#define __MSQ_PAD_BEFORE_TIME 0
@@ -20,7 +20,7 @@
# error "Never use <bits/msq-pad.h> directly; include <sys/msg.h> instead."
#endif
-#include <bits/wordsize.h>
+#include <bits/timesize.h>
#define __MSQ_PAD_AFTER_TIME 0
-#define __MSQ_PAD_BEFORE_TIME (__WORDSIZE == 32)
+#define __MSQ_PAD_BEFORE_TIME (__TIMESIZE == 32)
@@ -20,12 +20,12 @@
# error "Never use <bits/msq-pad.h> directly; include <sys/msg.h> instead."
#endif
-#include <bits/wordsize.h>
+#include <bits/timesize.h>
#ifdef __MIPSEL__
-# define __MSQ_PAD_AFTER_TIME (__WORDSIZE == 32)
+# define __MSQ_PAD_AFTER_TIME (__TIMESIZE == 32)
# define __MSQ_PAD_BEFORE_TIME 0
#else
# define __MSQ_PAD_AFTER_TIME 0
-# define __MSQ_PAD_BEFORE_TIME (__WORDSIZE == 32)
+# define __MSQ_PAD_BEFORE_TIME (__TIMESIZE == 32)
#endif
@@ -20,7 +20,7 @@
# error "Never use <bits/msq-pad.h> directly; include <sys/msg.h> instead."
#endif
-#include <bits/wordsize.h>
+#include <bits/timesize.h>
#define __MSQ_PAD_AFTER_TIME 0
-#define __MSQ_PAD_BEFORE_TIME (__WORDSIZE == 32)
+#define __MSQ_PAD_BEFORE_TIME (__TIMESIZE == 32)
@@ -20,7 +20,7 @@
# error "Never use <bits/msq-pad.h> directly; include <sys/msg.h> instead."
#endif
-#include <bits/wordsize.h>
+#include <bits/timesize.h>
#define __MSQ_PAD_AFTER_TIME 0
-#define __MSQ_PAD_BEFORE_TIME (__WORDSIZE == 32)
+#define __MSQ_PAD_BEFORE_TIME (__TIMESIZE == 32)
similarity index 74%
rename from sysdeps/unix/sysv/linux/x86/bits/msq-pad.h
rename to sysdeps/unix/sysv/linux/x86/bits/timesize.h
@@ -1,4 +1,4 @@
-/* Define where padding goes in struct msqid_ds. x86 version.
+/* Bit size of the time_t type at glibc build time, x86-64 and x32 case.
Copyright (C) 2018 Free Software Foundation, Inc.
This file is part of the GNU C Library.
@@ -16,13 +16,10 @@
License along with the GNU C Library; if not, see
<http://www.gnu.org/licenses/>. */
-#ifndef _SYS_MSG_H
-# error "Never use <bits/msq-pad.h> directly; include <sys/msg.h> instead."
-#endif
-
-#ifdef __x86_64__
-# define __MSQ_PAD_AFTER_TIME 0
+#if defined __x86_64__ && defined __ILP32__
+/* For x32, time is 64-bit even though word size is 32-bit. */
+# define __TIMESIZE 64
#else
-# define __MSQ_PAD_AFTER_TIME 1
+/* For others, time size is word size. */
+# define __TIMESIZE __WORDSIZE
#endif
-#define __MSQ_PAD_BEFORE_TIME 0