[05/19] arm64: rename COMPAT to AARCH32_EL0 in Kconfig
Commit Message
From: Andrew Pinski <apinski@cavium.com>
In this patchset ILP32 ABI support is added. Additionally to AARCH32,
which is binary-compatible with ARM, ILP32 is (mostly) ABI-compatible.
From now, AARCH32_EL0 (former COMPAT) config option means the support of
AARCH32 userspace, ARM64_ILP32 - support of ILP32 ABI (see next patches),
and COMPAT indicates that one of them, or both, is enabled.
Where needed, CONFIG_COMPAT is changed over to use CONFIG_AARCH32_EL0 instead
Reviewed-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
---
arch/arm64/Kconfig | 10 ++++++++--
arch/arm64/include/asm/fpsimd.h | 2 +-
arch/arm64/include/asm/hwcap.h | 4 ++--
arch/arm64/include/asm/processor.h | 6 +++---
arch/arm64/include/asm/ptrace.h | 2 +-
arch/arm64/include/asm/signal32.h | 6 ++++--
arch/arm64/include/asm/unistd.h | 2 +-
arch/arm64/kernel/Makefile | 2 +-
arch/arm64/kernel/asm-offsets.c | 2 +-
arch/arm64/kernel/cpufeature.c | 8 ++++----
arch/arm64/kernel/cpuinfo.c | 20 +++++++++++---------
arch/arm64/kernel/entry.S | 6 +++---
arch/arm64/kernel/head.S | 2 +-
arch/arm64/kernel/ptrace.c | 8 ++++----
arch/arm64/kernel/traps.c | 2 +-
arch/arm64/kernel/vdso.c | 4 ++--
drivers/clocksource/arm_arch_timer.c | 2 +-
17 files changed, 49 insertions(+), 39 deletions(-)
Comments
Hi, Yury
On 2016/6/18 7:54, Yury Norov wrote:
> From: Andrew Pinski <apinski@cavium.com>
>
> In this patchset ILP32 ABI support is added. Additionally to AARCH32,
> which is binary-compatible with ARM, ILP32 is (mostly) ABI-compatible.
>
> From now, AARCH32_EL0 (former COMPAT) config option means the support of
> AARCH32 userspace, ARM64_ILP32 - support of ILP32 ABI (see next patches),
> and COMPAT indicates that one of them, or both, is enabled.
>
> Where needed, CONFIG_COMPAT is changed over to use CONFIG_AARCH32_EL0 instead
>
> Reviewed-by: David Daney <ddaney@caviumnetworks.com>
> Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
> Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
> Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
...
> diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
> index c173d32..af200a8 100644
> --- a/arch/arm64/kernel/cpuinfo.c
> +++ b/arch/arm64/kernel/cpuinfo.c
> @@ -134,15 +134,17 @@ static int c_show(struct seq_file *m, void *v)
> */
> seq_puts(m, "Features\t:");
> if (compat) {
> -#ifdef CONFIG_COMPAT
> - for (j = 0; compat_hwcap_str[j]; j++)
> - if (compat_elf_hwcap & (1 << j))
> - seq_printf(m, " %s", compat_hwcap_str[j]);
> -
> - for (j = 0; compat_hwcap2_str[j]; j++)
> - if (compat_elf_hwcap2 & (1 << j))
> - seq_printf(m, " %s", compat_hwcap2_str[j]);
> -#endif /* CONFIG_COMPAT */
> +#ifdef CONFIG_AARCH32_EL0
I saw that compat_hwcap_str and compat_hwcap2_str is defined when
"CONFIG_COMPAT" is true. Why we only change it to CONFIG_AARCH32_EL0
in c show()?
> + if (personality(current->personality) == PER_LINUX32) {
And "compat" is "personality(current->personality) == PER_LINUX32;",
it seems that there is no need to add this twice.
Regards
Bamvor
> + for (j = 0; compat_hwcap_str[j]; j++)
> + if (compat_elf_hwcap & (1 << j))
> + seq_printf(m, " %s", compat_hwcap_str[j]);
> +
> + for (j = 0; compat_hwcap2_str[j]; j++)
> + if (compat_elf_hwcap2 & (1 << j))
> + seq_printf(m, " %s", compat_hwcap2_str[j]);
> + }
> +#endif /* CONFIG_AARCH32_EL0 */
> } else {
> for (j = 0; hwcap_str[j]; j++)
> if (elf_hwcap & (1 << j))
On Thursday, August 11, 2016 3:35:01 PM CEST Zhangjian (Bamvor) wrote:
> On 2016/6/18 7:54, Yury Norov wrote:
> > From: Andrew Pinski <apinski@cavium.com>
> >
> > In this patchset ILP32 ABI support is added. Additionally to AARCH32,
> > which is binary-compatible with ARM, ILP32 is (mostly) ABI-compatible.
> >
> > From now, AARCH32_EL0 (former COMPAT) config option means the support of
> > AARCH32 userspace, ARM64_ILP32 - support of ILP32 ABI (see next patches),
> > and COMPAT indicates that one of them, or both, is enabled.
> >
> > Where needed, CONFIG_COMPAT is changed over to use CONFIG_AARCH32_EL0 instead
> >
> > Reviewed-by: David Daney <ddaney@caviumnetworks.com>
> > Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
> > Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> > Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
> > Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
> > Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
> ...
> > diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
> > index c173d32..af200a8 100644
> > --- a/arch/arm64/kernel/cpuinfo.c
> > +++ b/arch/arm64/kernel/cpuinfo.c
> > @@ -134,15 +134,17 @@ static int c_show(struct seq_file *m, void *v)
> > */
> > seq_puts(m, "Features\t:");
> > if (compat) {
> > -#ifdef CONFIG_COMPAT
> > - for (j = 0; compat_hwcap_str[j]; j++)
> > - if (compat_elf_hwcap & (1 << j))
> > - seq_printf(m, " %s", compat_hwcap_str[j]);
> > -
> > - for (j = 0; compat_hwcap2_str[j]; j++)
> > - if (compat_elf_hwcap2 & (1 << j))
> > - seq_printf(m, " %s", compat_hwcap2_str[j]);
> > -#endif /* CONFIG_COMPAT */
> > +#ifdef CONFIG_AARCH32_EL0
> I saw that compat_hwcap_str and compat_hwcap2_str is defined when
> "CONFIG_COMPAT" is true. Why we only change it to CONFIG_AARCH32_EL0
> in c show()?
> > + if (personality(current->personality) == PER_LINUX32) {
> And "compat" is "personality(current->personality) == PER_LINUX32;",
> it seems that there is no need to add this twice.
I think it would be best to remove the #ifdef here completely,
the PER_LINUX32 concept is not strictly tied to the emulation
of ARM binaries, it literally just changes the output of
/proc/cpuinfo and 'uname', and you can have ARM binaries with
PER_LINUX (using the arm64 uname) just like you can have
arm64 binaries running with PER_LINUX32.
Arnd
On Thursday, August 11, 2016 3:50:00 PM CEST Catalin Marinas wrote:
> On Thu, Aug 11, 2016 at 10:53:01AM +0200, Arnd Bergmann wrote:
> > On Thursday, August 11, 2016 3:35:01 PM CEST Zhangjian (Bamvor) wrote:
> > > On 2016/6/18 7:54, Yury Norov wrote:
> > > > From: Andrew Pinski <apinski@cavium.com>
> > > >
> > > > In this patchset ILP32 ABI support is added. Additionally to AARCH32,
> > > > which is binary-compatible with ARM, ILP32 is (mostly) ABI-compatible.
> > > >
> > > > From now, AARCH32_EL0 (former COMPAT) config option means the support of
> > > > AARCH32 userspace, ARM64_ILP32 - support of ILP32 ABI (see next patches),
> > > > and COMPAT indicates that one of them, or both, is enabled.
> > > >
> > > > Where needed, CONFIG_COMPAT is changed over to use CONFIG_AARCH32_EL0 instead
> > > >
> > > > Reviewed-by: David Daney <ddaney@caviumnetworks.com>
> > > > Signed-off-by: Andrew Pinski <Andrew.Pinski@caviumnetworks.com>
> > > > Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> > > > Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
> > > > Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
> > > > Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
> > > ...
> > > > diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
> > > > index c173d32..af200a8 100644
> > > > --- a/arch/arm64/kernel/cpuinfo.c
> > > > +++ b/arch/arm64/kernel/cpuinfo.c
> > > > @@ -134,15 +134,17 @@ static int c_show(struct seq_file *m, void *v)
> > > > */
> > > > seq_puts(m, "Features\t:");
> > > > if (compat) {
> > > > -#ifdef CONFIG_COMPAT
> > > > - for (j = 0; compat_hwcap_str[j]; j++)
> > > > - if (compat_elf_hwcap & (1 << j))
> > > > - seq_printf(m, " %s", compat_hwcap_str[j]);
> > > > -
> > > > - for (j = 0; compat_hwcap2_str[j]; j++)
> > > > - if (compat_elf_hwcap2 & (1 << j))
> > > > - seq_printf(m, " %s", compat_hwcap2_str[j]);
> > > > -#endif /* CONFIG_COMPAT */
> > > > +#ifdef CONFIG_AARCH32_EL0
> > > I saw that compat_hwcap_str and compat_hwcap2_str is defined when
> > > "CONFIG_COMPAT" is true. Why we only change it to CONFIG_AARCH32_EL0
> > > in c show()?
> > > > + if (personality(current->personality) == PER_LINUX32) {
> > > And "compat" is "personality(current->personality) == PER_LINUX32;",
> > > it seems that there is no need to add this twice.
> >
> > I think it would be best to remove the #ifdef here completely,
> > the PER_LINUX32 concept is not strictly tied to the emulation
> > of ARM binaries, it literally just changes the output of
> > /proc/cpuinfo and 'uname',
>
> It's not strictly related to ARM binaries, however it is related to
> AArch32 CPU features being supported and detected by the kernel.
> Currently, with CONFIG_COMPAT disabled, we won't have access to a
> (meaningful) compat_elf_hwcap.
Ah, makes sense. In that case, using CONFIG_AARCH32_EL0 sounds like
the right thing to do here, though I guess we can just drop the
"if (compat)" check, as we specifically want to print the supported
features of the CPU, and they are still present even if a
process with PER_LINUX reads them.
> > and you can have ARM binaries with
> > PER_LINUX (using the arm64 uname) just like you can have
> > arm64 binaries running with PER_LINUX32.
>
> I was actually looking to enforce the 32-bit binaries to only see
> PER_LINUX32, though with a risk of breaking the ABI. OTOH, people are
> abusing this and write 32-bit apps relying on the 64-bit /proc/cpuinfo:
>
> http://lkml.kernel.org/g/1464706504-25224-3-git-send-email-catalin.marinas@arm.com
>
> (you were summoned on that discussion couple of times ;))
Hmm, I thought I saw the thread and didn't have any good idea for
the uname information, but didn't notice it was for /proc/cpuinfo.
What's wrong with always showing both the 32-bit and the 64-bit
hwcap strings here (minus the duplicates, which hopefully have
the same meaning here)?
Arnd
On Thursday, August 11, 2016 5:30:03 PM CEST Catalin Marinas wrote:
> > > > and you can have ARM binaries with
> > > > PER_LINUX (using the arm64 uname) just like you can have
> > > > arm64 binaries running with PER_LINUX32.
> > >
> > > I was actually looking to enforce the 32-bit binaries to only see
> > > PER_LINUX32, though with a risk of breaking the ABI. OTOH, people are
> > > abusing this and write 32-bit apps relying on the 64-bit /proc/cpuinfo:
> > >
> > > http://lkml.kernel.org/g/1464706504-25224-3-git-send-email-catalin.marinas@arm.com
> > >
> > > (you were summoned on that discussion couple of times ;))
> >
> > Hmm, I thought I saw the thread and didn't have any good idea for
> > the uname information, but didn't notice it was for /proc/cpuinfo.
> >
> > What's wrong with always showing both the 32-bit and the 64-bit
> > hwcap strings here (minus the duplicates, which hopefully have
> > the same meaning here)?
>
> As I said above, some of them have the same name (which may be a good
> thing at a first look) but we don't have an architecture guarantee that
> the feature is present in both AArch32 and AArch64 modes (e.g. AES may
> only be available in AArch64).
Is this the case on actual implementations that exist today? If they
are actually always both present, we might be able to get away with it.
Arnd
On Fri, Aug 12, 2016 at 03:36:12PM +0100, Catalin Marinas wrote:
> On Thu, Aug 11, 2016 at 10:29:03PM +0200, Arnd Bergmann wrote:
> > On Thursday, August 11, 2016 5:30:03 PM CEST Catalin Marinas wrote:
> > > > > > and you can have ARM binaries with
> > > > > > PER_LINUX (using the arm64 uname) just like you can have
> > > > > > arm64 binaries running with PER_LINUX32.
> > > > >
> > > > > I was actually looking to enforce the 32-bit binaries to only see
> > > > > PER_LINUX32, though with a risk of breaking the ABI. OTOH, people are
> > > > > abusing this and write 32-bit apps relying on the 64-bit /proc/cpuinfo:
> > > > >
> > > > > http://lkml.kernel.org/g/1464706504-25224-3-git-send-email-catalin.marinas@arm.com
> > > > >
> > > > > (you were summoned on that discussion couple of times ;))
> > > >
> > > > Hmm, I thought I saw the thread and didn't have any good idea for
> > > > the uname information, but didn't notice it was for /proc/cpuinfo.
> > > >
> > > > What's wrong with always showing both the 32-bit and the 64-bit
> > > > hwcap strings here (minus the duplicates, which hopefully have
> > > > the same meaning here)?
> > >
> > > As I said above, some of them have the same name (which may be a good
> > > thing at a first look) but we don't have an architecture guarantee that
> > > the feature is present in both AArch32 and AArch64 modes (e.g. AES may
> > > only be available in AArch64).
> >
> > Is this the case on actual implementations that exist today? If they
> > are actually always both present, we might be able to get away with it.
>
> It may be fine on current implementations but what would we do when/if
> we actually find such discrepancy? It's not just ARM Ltd designing the
> chips, so as long as the architecture doesn't mandate it you may find
> strange implementations.
>
> Imposing such restriction in the architecture doesn't make sense if the
> only reason is the /proc/cpuinfo file (and I can't think of any other
> reason why this should be enforced).
>
> What I'm worried about is 32-bit apps running on an arm64 kernel and
> making use of the 64-bit /proc/cpuinfo without any guarantee that the
> AArch32 state has such features. In my patch proposal linked above I
> wanted to always force the compat /proc/cpuinfo for 32-bit tasks.
The link doesn't work for me. Is there other link, or what's the
maillist there?
So, what we decided finally? Is my understanding correct that we leave
everything as is in ilp32 series, and it will be resolved separately?
Yury.
>
> --
> Catalin
@@ -385,7 +385,7 @@ config ARM64_ERRATUM_834220
config ARM64_ERRATUM_845719
bool "Cortex-A53: 845719: a load might read incorrect data"
- depends on COMPAT
+ depends on AARCH32_EL0
default y
help
This option adds an alternative code sequence to work around ARM
@@ -701,7 +701,7 @@ config FORCE_MAX_ZONEORDER
menuconfig ARMV8_DEPRECATED
bool "Emulate deprecated/obsolete ARMv8 instructions"
- depends on COMPAT
+ depends on AARCH32_EL0
help
Legacy software support may require certain instructions
that have been deprecated or obsoleted in the architecture.
@@ -971,8 +971,14 @@ menu "Userspace binary formats"
source "fs/Kconfig.binfmt"
config COMPAT
+ bool
+ depends on AARCH32_EL0
+
+config AARCH32_EL0
bool "Kernel support for 32-bit EL0"
+ def_bool y
depends on ARM64_4K_PAGES || EXPERT
+ select COMPAT
select COMPAT_BINFMT_ELF
select HAVE_UID16
select OLD_SIGSUSPEND3
@@ -52,7 +52,7 @@ struct fpsimd_partial_state {
};
-#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
+#if defined(__KERNEL__) && defined(CONFIG_AARCH32_EL0)
/* Masks for extracting the FPSR and FPCR from the FPSCR */
#define VFP_FPSCR_STAT_MASK 0xf800009f
#define VFP_FPSCR_CTRL_MASK 0x07f79f00
@@ -46,7 +46,7 @@
*/
#define ELF_HWCAP (elf_hwcap)
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
#define COMPAT_ELF_HWCAP (compat_elf_hwcap)
#define COMPAT_ELF_HWCAP2 (compat_elf_hwcap2)
extern unsigned int compat_elf_hwcap, compat_elf_hwcap2;
@@ -54,7 +54,7 @@ extern unsigned int compat_elf_hwcap, compat_elf_hwcap2;
enum {
CAP_HWCAP = 1,
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
CAP_COMPAT_HWCAP,
CAP_COMPAT_HWCAP2,
#endif
@@ -81,7 +81,7 @@ struct cpu_context {
struct thread_struct {
struct cpu_context cpu_context; /* cpu context */
unsigned long tp_value; /* TLS register */
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
unsigned long tp2_value;
#endif
struct fpsimd_state fpsimd_state;
@@ -90,7 +90,7 @@ struct thread_struct {
struct debug_info debug; /* debugging */
};
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
#define task_user_tls(t) \
({ \
unsigned long *__tls; \
@@ -121,7 +121,7 @@ static inline void start_thread(struct pt_regs *regs, unsigned long pc,
regs->sp = sp;
}
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc,
unsigned long sp)
{
@@ -121,7 +121,7 @@ struct pt_regs {
#define arch_has_single_step() (1)
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
#define compat_thumb_mode(regs) \
(((regs)->pstate & COMPAT_PSR_T_BIT))
#else
@@ -17,7 +17,9 @@
#define __ASM_SIGNAL32_H
#ifdef __KERNEL__
-#ifdef CONFIG_COMPAT
+
+#ifdef CONFIG_AARCH32_EL0
+
#include <linux/compat.h>
#define AARCH32_KERN_SIGRET_CODE_OFFSET 0x500
@@ -47,6 +49,6 @@ static inline int compat_setup_rt_frame(int usig, struct ksignal *ksig, sigset_t
static inline void compat_setup_restart_syscall(struct pt_regs *regs)
{
}
-#endif /* CONFIG_COMPAT */
+#endif /* CONFIG_AARCH32_EL0 */
#endif /* __KERNEL__ */
#endif /* __ASM_SIGNAL32_H */
@@ -13,7 +13,7 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
#define __ARCH_WANT_COMPAT_SYS_GETDENTS64
#define __ARCH_WANT_COMPAT_STAT64
#define __ARCH_WANT_SYS_GETHOSTNAME
@@ -25,7 +25,7 @@ OBJCOPYFLAGS := --prefix-symbols=__efistub_
$(obj)/%.stub.o: $(obj)/%.o FORCE
$(call if_changed,objcopy)
-arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \
+arm64-obj-$(CONFIG_AARCH32_EL0) += sys32.o kuser32.o signal32.o \
sys_compat.o entry32.o \
../../arm/kernel/opcodes.o
arm64-obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o
@@ -53,7 +53,7 @@ int main(void)
DEFINE(S_X7, offsetof(struct pt_regs, regs[7]));
DEFINE(S_LR, offsetof(struct pt_regs, regs[30]));
DEFINE(S_SP, offsetof(struct pt_regs, sp));
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
DEFINE(S_COMPAT_SP, offsetof(struct pt_regs, compat_sp));
#endif
DEFINE(S_PSTATE, offsetof(struct pt_regs, pstate));
@@ -32,7 +32,7 @@
unsigned long elf_hwcap __read_mostly;
EXPORT_SYMBOL_GPL(elf_hwcap);
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
#define COMPAT_ELF_HWCAP_DEFAULT \
(COMPAT_HWCAP_HALF|COMPAT_HWCAP_THUMB|\
COMPAT_HWCAP_FAST_MULT|COMPAT_HWCAP_EDSP|\
@@ -834,7 +834,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
};
static const struct arm64_cpu_capabilities compat_elf_hwcaps[] = {
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL),
HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES),
HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA1_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1),
@@ -850,7 +850,7 @@ static void __init cap_set_elf_hwcap(const struct arm64_cpu_capabilities *cap)
case CAP_HWCAP:
elf_hwcap |= cap->hwcap;
break;
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
case CAP_COMPAT_HWCAP:
compat_elf_hwcap |= (u32)cap->hwcap;
break;
@@ -873,7 +873,7 @@ static bool cpus_have_elf_hwcap(const struct arm64_cpu_capabilities *cap)
case CAP_HWCAP:
rc = (elf_hwcap & cap->hwcap) != 0;
break;
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
case CAP_COMPAT_HWCAP:
rc = (compat_elf_hwcap & (u32)cap->hwcap) != 0;
break;
@@ -134,15 +134,17 @@ static int c_show(struct seq_file *m, void *v)
*/
seq_puts(m, "Features\t:");
if (compat) {
-#ifdef CONFIG_COMPAT
- for (j = 0; compat_hwcap_str[j]; j++)
- if (compat_elf_hwcap & (1 << j))
- seq_printf(m, " %s", compat_hwcap_str[j]);
-
- for (j = 0; compat_hwcap2_str[j]; j++)
- if (compat_elf_hwcap2 & (1 << j))
- seq_printf(m, " %s", compat_hwcap2_str[j]);
-#endif /* CONFIG_COMPAT */
+#ifdef CONFIG_AARCH32_EL0
+ if (personality(current->personality) == PER_LINUX32) {
+ for (j = 0; compat_hwcap_str[j]; j++)
+ if (compat_elf_hwcap & (1 << j))
+ seq_printf(m, " %s", compat_hwcap_str[j]);
+
+ for (j = 0; compat_hwcap2_str[j]; j++)
+ if (compat_elf_hwcap2 & (1 << j))
+ seq_printf(m, " %s", compat_hwcap2_str[j]);
+ }
+#endif /* CONFIG_AARCH32_EL0 */
} else {
for (j = 0; hwcap_str[j]; j++)
if (elf_hwcap & (1 << j))
@@ -260,7 +260,7 @@ ENTRY(vectors)
ventry el0_fiq_invalid // FIQ 64-bit EL0
ventry el0_error_invalid // Error 64-bit EL0
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
ventry el0_sync_compat // Synchronous 32-bit EL0
ventry el0_irq_compat // IRQ 32-bit EL0
ventry el0_fiq_invalid_compat // FIQ 32-bit EL0
@@ -300,7 +300,7 @@ el0_error_invalid:
inv_entry 0, BAD_ERROR
ENDPROC(el0_error_invalid)
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
el0_fiq_invalid_compat:
inv_entry 0, BAD_FIQ, 32
ENDPROC(el0_fiq_invalid_compat)
@@ -463,7 +463,7 @@ el0_sync:
b.ge el0_dbg
b el0_inv
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
.align 6
el0_sync_compat:
kernel_entry 0, 32
@@ -567,7 +567,7 @@ CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems
msr cptr_el2, x0 // Disable copro. traps to EL2
1:
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
msr hstr_el2, xzr // Disable CP15 traps to EL2
#endif
@@ -82,7 +82,7 @@ static void ptrace_hbptriggered(struct perf_event *bp,
.si_addr = (void __user *)(bkpt->trigger),
};
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
int i;
if (!is_compat_task())
@@ -657,7 +657,7 @@ static const struct user_regset_view user_aarch64_view = {
.regsets = aarch64_regsets, .n = ARRAY_SIZE(aarch64_regsets)
};
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
#include <linux/compat.h>
enum compat_regset {
@@ -1192,11 +1192,11 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
return ret;
}
-#endif /* CONFIG_COMPAT */
+#endif /* CONFIG_AARCH32_EL0 */
const struct user_regset_view *task_user_regset_view(struct task_struct *task)
{
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
/*
* Core dumping of 32-bit tasks or compat ptrace requests must use the
* user_aarch32_view compatible with arm32. Native ptrace requests on
@@ -409,7 +409,7 @@ long compat_arm_syscall(struct pt_regs *regs);
asmlinkage long do_ni_syscall(struct pt_regs *regs)
{
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
long ret;
if (is_compat_task()) {
ret = compat_arm_syscall(regs);
@@ -49,7 +49,7 @@ static union {
} vdso_data_store __page_aligned_data;
struct vdso_data *vdso_data = &vdso_data_store.data;
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
/*
* Create and map the vectors page for AArch32 tasks.
*/
@@ -108,7 +108,7 @@ int aarch32_setup_vectors_page(struct linux_binprm *bprm, int uses_interp)
return PTR_ERR_OR_ZERO(ret);
}
-#endif /* CONFIG_COMPAT */
+#endif /* CONFIG_AARCH32_EL0 */
static struct vm_special_mapping vdso_spec[2];
@@ -321,7 +321,7 @@ static void arch_timer_evtstrm_enable(int divider)
| ARCH_TIMER_VIRT_EVT_EN;
arch_timer_set_cntkctl(cntkctl);
elf_hwcap |= HWCAP_EVTSTRM;
-#ifdef CONFIG_COMPAT
+#ifdef CONFIG_AARCH32_EL0
compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM;
#endif
}