@@ -472,6 +472,18 @@ else
+link-tests = $(+link-static-tests)
endif
endif
+
+# Some modules may have test programs that must always link against the newly
+# built libraries instead of the installed ones. Such modules must define
+# tests-need-hardcoded-path in their Makefile before including Makerules.
+# This will cause the test programs to be linked with -rpath instead of
+# -rpath-link, and their dynamic linker will be set to the built ld.so.
+ifeq (yes,$(build-shared))
+ifdef tests-need-hardcoded-path
+build-hardcoded-path-in-tests := yes
+endif
+endif
+
ifeq (yes,$(build-shared))
ifndef rtld-LDFLAGS
rtld-LDFLAGS = -Wl,-dynamic-linker=$(rtlddir)/$(rtld-installed-name)
@@ -1096,7 +1108,7 @@ all-subdirs = csu assert ctype locale intl catgets math setjmp signal \
grp pwd posix io termios resource misc socket sysvipc gmon \
gnulib iconv iconvdata wctype manual shadow gshadow po argp \
crypt localedata timezone rt conform debug mathvec \
- $(add-on-subdirs) dlfcn elf
+ $(add-on-subdirs) dlfcn elf pretty-printers
ifndef avoid-generated
# sysd-sorted itself will contain rules making the sysd-sorted target
@@ -190,6 +190,52 @@ sed-remove-dotdot := -e 's@ *\([^ \/$$][^ \]*\)@ $$(..)\1@g' \
-e 's@^\([^ \/$$][^ \]*\)@$$(..)\1@g'
endif
+ifdef gen-py-const-headers
+# We'll use a static pattern rule to match .pysym files with their
+# corresponding generated .py files.
+# The generated .py files go in the submodule's dir in the glibc source dir.
+py-const-files := $(patsubst %.pysym,%.py,$(gen-py-const-headers))
+py-const-dir := $(objpfx)
+py-const := $(addprefix $(py-const-dir),$(py-const-files))
+py-const-script := $(..)scripts/gen-py-const.awk
+
+# This is a hack we use to generate .py files with constants for Python
+# pretty printers. It works the same way as gen-as-const.
+# See scripts/gen-py-const.awk for details on how the awk | gcc mechanism
+# works.
+#
+# $@.tmp and $@.tmp2 are temporary files we use to store the partial contents
+# of the target file. We do this instead of just writing on $@ because, if the
+# build process terminates prematurely, re-running Make wouldn't run this rule
+# since Make would see that the target file already exists (despite it being
+# incomplete).
+#
+# The sed line replaces "@name@SOME_NAME@value@SOME_VALUE@" strings from the
+# output of 'gcc -S' with "SOME_NAME = SOME_VALUE" strings.
+# The '-n' option, combined with the '/p' command, makes sed output only the
+# modified lines instead of the whole input file. The output is redirected
+# to a .py file; we'll import it in the pretty printers file to read
+# the constants generated by gen-py-const.awk.
+# The regex has two capturing groups, for SOME_NAME and SOME_VALUE
+# respectively. Notice SOME_VALUE may be prepended by a special character,
+# depending on the assembly syntax (e.g. immediates are prefixed by a '$'
+# in AT&T x86, and by a '#' in ARM). We discard it using a complemented set
+# before the second capturing group.
+$(py-const): $(py-const-dir)%.py: %.pysym $(py-const-script) \
+ $(common-before-compile)
+ $(make-target-directory)
+ $(AWK) -f $(py-const-script) $< \
+ | $(CC) -S -o $@.tmp $(CFLAGS) $(CPPFLAGS) -x c -
+ echo '# GENERATED FILE\n' > $@.tmp2
+ echo '# Constant definitions for pretty printers.' >> $@.tmp2
+ echo '# See gen-py-const.awk for details.\n' >> $@.tmp2
+ sed -n -r 's/^.*@name@([^@]+)@value@[^[:xdigit:]Xx-]*([[:xdigit:]Xx-]+)@.*/\1 = \2/p' \
+ $@.tmp >> $@.tmp2
+ mv -f $@.tmp2 $@
+ rm -f $@.tmp
+
+generated += $(py-const)
+endif # gen-py-const-headers
ifdef gen-as-const-headers
# Generating headers for assembly constants.
@@ -98,6 +98,11 @@ tests: $(tests:%=$(objpfx)%.out) $(tests-special)
xtests: tests $(xtests:%=$(objpfx)%.out) $(xtests-special)
endif
+# Generate constant files for Python pretty printers if required.
+ifdef py-const
+others: $(py-const)
+endif
+
tests-special-notdir = $(patsubst $(objpfx)%, %, $(tests-special))
xtests-special-notdir = $(patsubst $(objpfx)%, %, $(xtests-special))
tests:
@@ -307,6 +307,7 @@ gen-as-const-headers = pthread-errnos.sym \
unwindbuf.sym \
lowlevelrobustlock.sym pthread-pi-defines.sym
+gen-py-const-headers = nptl_lock_constants.pysym
LDFLAGS-pthread.so = -Wl,--enable-new-dtags,-z,nodelete,-z,initfirst
new file mode 100644
@@ -0,0 +1,593 @@
+# Pretty printers for the NPTL lock types.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+"""This file contains the gdb pretty printers for the following types:
+
+ * pthread_mutex_t
+ * pthread_mutexattr_t
+ * pthread_cond_t
+ * pthread_condattr_t
+ * pthread_rwlock_t
+ * pthread_rwlockattr_t
+
+You can check which printers are registered and enabled by issuing the
+'info pretty-printer' gdb command. Printers should trigger automatically when
+trying to print a variable of one of the types mentioned above.
+"""
+
+from __future__ import print_function
+
+import gdb
+from nptl_lock_constants import *
+
+MUTEX_TYPES = {
+ PTHREAD_MUTEX_NORMAL: ('Type', 'Normal'),
+ PTHREAD_MUTEX_RECURSIVE: ('Type', 'Recursive'),
+ PTHREAD_MUTEX_ERRORCHECK: ('Type', 'Error check'),
+ PTHREAD_MUTEX_ADAPTIVE_NP: ('Type', 'Adaptive')
+}
+
+class MutexPrinter(object):
+ """Pretty printer for pthread_mutex_t."""
+
+ def __init__(self, mutex):
+ """Initialize the printer's internal data structures.
+
+ Args:
+ mutex: A gdb.value representing a pthread_mutex_t.
+ """
+
+ data = mutex['__data']
+ self.lock = data['__lock']
+ self.count = data['__count']
+ self.owner = data['__owner']
+ self.kind = data['__kind']
+ self.values = []
+ self.read_values()
+
+ def to_string(self):
+ """gdb API function.
+
+ This is called from gdb when we try to print a pthread_mutex_t.
+ """
+
+ return 'pthread_mutex_t'
+
+ def children(self):
+ """gdb API function.
+
+ This is called from gdb when we try to print a pthread_mutex_t.
+ """
+
+ return self.values
+
+ def read_values(self):
+ """Read the mutex's info and store it in self.values.
+
+ The data contained in self.values will be returned by the Iterator
+ created in self.children.
+ """
+
+ self.read_type()
+ self.read_status()
+ self.read_attributes()
+ self.read_misc_info()
+
+ def read_type(self):
+ """Read the mutex's type."""
+
+ mutex_type = self.kind & PTHREAD_MUTEX_KIND_MASK
+
+ # mutex_type must be casted to int because it's a gdb.Value
+ self.values.append(MUTEX_TYPES[int(mutex_type)])
+
+ def read_status(self):
+ """Read the mutex's status.
+
+ For architectures which support lock elision, this method reads
+ whether the mutex appears as locked in memory (i.e. it may show it as
+ unlocked even after calling pthread_mutex_lock).
+ """
+
+ if self.kind == PTHREAD_MUTEX_DESTROYED:
+ self.values.append(('Status', 'Destroyed'))
+ elif self.kind & PTHREAD_MUTEX_ROBUST_NORMAL_NP:
+ self.read_status_robust()
+ else:
+ self.read_status_no_robust()
+
+ def read_status_robust(self):
+ """Read the status of a robust mutex.
+
+ In glibc robust mutexes are implemented in a very different way than
+ non-robust ones. This method reads their locking status,
+ whether it may have waiters, their registered owner (if any),
+ whether the owner is alive or not, and the status of the state
+ they're protecting.
+ """
+
+ if self.lock == PTHREAD_MUTEX_UNLOCKED:
+ self.values.append(('Status', 'Unlocked'))
+ else:
+ if self.lock & FUTEX_WAITERS:
+ self.values.append(('Status', 'Locked, possibly with waiters'))
+ else:
+ self.values.append(('Status',
+ 'Locked, possibly with no waiters'))
+
+ if self.lock & FUTEX_OWNER_DIED:
+ self.values.append(('Owner ID', '%d (dead)' % self.owner))
+ else:
+ self.values.append(('Owner ID', self.lock & FUTEX_TID_MASK))
+
+ if self.owner == PTHREAD_MUTEX_INCONSISTENT:
+ self.values.append(('State protected by this mutex',
+ 'Inconsistent'))
+ elif self.owner == PTHREAD_MUTEX_NOTRECOVERABLE:
+ self.values.append(('State protected by this mutex',
+ 'Not recoverable'))
+
+ def read_status_no_robust(self):
+ """Read the status of a non-robust mutex.
+
+ Read info on whether the mutex is locked, if it may have waiters
+ and its owner (if any).
+ """
+
+ lock_value = self.lock
+
+ if self.kind & PTHREAD_MUTEX_PRIO_PROTECT_NP:
+ lock_value &= ~(PTHREAD_MUTEX_PRIO_CEILING_MASK)
+
+ if lock_value == PTHREAD_MUTEX_UNLOCKED:
+ self.values.append(('Status', 'Unlocked'))
+ else:
+ if self.kind & PTHREAD_MUTEX_PRIO_INHERIT_NP:
+ waiters = self.lock & FUTEX_WAITERS
+ owner = self.lock & FUTEX_TID_MASK
+ else:
+ # Mutex protocol is PP or none
+ waiters = (self.lock != PTHREAD_MUTEX_LOCKED_NO_WAITERS)
+ owner = self.owner
+
+ if waiters:
+ self.values.append(('Status', 'Locked, possibly with waiters'))
+ else:
+ self.values.append(('Status',
+ 'Locked, possibly with no waiters'))
+
+ self.values.append(('Owner ID', owner))
+
+ def read_attributes(self):
+ """Read the mutex's attributes."""
+
+ if self.kind != PTHREAD_MUTEX_DESTROYED:
+ if self.kind & PTHREAD_MUTEX_ROBUST_NORMAL_NP:
+ self.values.append(('Robust', 'Yes'))
+ else:
+ self.values.append(('Robust', 'No'))
+
+ # In glibc, robust mutexes always have their pshared flag set to
+ # 'shared' regardless of what the pshared flag of their
+ # mutexattr was. Therefore a robust mutex will act as shared
+ # even if it was initialized with a 'private' mutexattr.
+ if self.kind & PTHREAD_MUTEX_PSHARED_BIT:
+ self.values.append(('Shared', 'Yes'))
+ else:
+ self.values.append(('Shared', 'No'))
+
+ if self.kind & PTHREAD_MUTEX_PRIO_INHERIT_NP:
+ self.values.append(('Protocol', 'Priority inherit'))
+ elif self.kind & PTHREAD_MUTEX_PRIO_PROTECT_NP:
+ prio_ceiling = ((self.lock & PTHREAD_MUTEX_PRIO_CEILING_MASK)
+ >> PTHREAD_MUTEX_PRIO_CEILING_SHIFT)
+
+ self.values.append(('Protocol', 'Priority protect'))
+ self.values.append(('Priority ceiling', prio_ceiling))
+ else:
+ # PTHREAD_PRIO_NONE
+ self.values.append(('Protocol', 'None'))
+
+ def read_misc_info(self):
+ """Read miscellaneous info on the mutex.
+
+ For now this reads the number of times a recursive mutex was locked
+ by the same thread.
+ """
+
+ mutex_type = self.kind & PTHREAD_MUTEX_KIND_MASK
+
+ if mutex_type == PTHREAD_MUTEX_RECURSIVE and self.count > 1:
+ self.values.append(('Times locked recursively', self.count))
+
+class MutexAttributesPrinter(object):
+ """Pretty printer for pthread_mutexattr_t.
+
+ In the NPTL this is a type that's always casted to struct pthread_mutexattr
+ which has a single 'mutexkind' field containing the actual attributes.
+ """
+
+ def __init__(self, mutexattr):
+ """Initialize the printer's internal data structures.
+
+ Args:
+ mutexattr: A gdb.value representing a pthread_mutexattr_t.
+ """
+
+ mutexattr_struct = gdb.lookup_type('struct pthread_mutexattr')
+ self.mutexattr = mutexattr.cast(mutexattr_struct)['mutexkind']
+ self.values = []
+ self.read_values()
+
+ def to_string(self):
+ """gdb API function.
+
+ This is called from gdb when we try to print a pthread_mutexattr_t.
+ """
+
+ return 'pthread_mutexattr_t'
+
+ def children(self):
+ """gdb API function.
+
+ This is called from gdb when we try to print a pthread_mutexattr_t.
+ """
+
+ return self.values
+
+ def read_values(self):
+ """Read the mutexattr's info and store it in self.values.
+
+ The data contained in self.values will be returned by the Iterator
+ created in self.children.
+ """
+
+ mutexattr_type = (self.mutexattr
+ & ~PTHREAD_MUTEXATTR_FLAG_BITS
+ & ~PTHREAD_MUTEX_NO_ELISION_NP)
+
+ # mutexattr_type must be casted to int because it's a gdb.Value
+ self.values.append(MUTEX_TYPES[int(mutexattr_type)])
+
+ if self.mutexattr & PTHREAD_MUTEXATTR_FLAG_ROBUST:
+ self.values.append(('Robust', 'Yes'))
+ else:
+ self.values.append(('Robust', 'No'))
+
+ if self.mutexattr & PTHREAD_MUTEXATTR_FLAG_PSHARED:
+ self.values.append(('Shared', 'Yes'))
+ else:
+ self.values.append(('Shared', 'No'))
+
+ protocol = ((self.mutexattr & PTHREAD_MUTEXATTR_PROTOCOL_MASK) >>
+ PTHREAD_MUTEXATTR_PROTOCOL_SHIFT)
+
+ if protocol == PTHREAD_PRIO_NONE:
+ self.values.append(('Protocol', 'None'))
+ elif protocol == PTHREAD_PRIO_INHERIT:
+ self.values.append(('Protocol', 'Priority inherit'))
+ elif protocol == PTHREAD_PRIO_PROTECT:
+ self.values.append(('Protocol', 'Priority protect'))
+
+CLOCK_IDS = {
+ CLOCK_REALTIME: 'CLOCK_REALTIME',
+ CLOCK_MONOTONIC: 'CLOCK_MONOTONIC',
+ CLOCK_PROCESS_CPUTIME_ID: 'CLOCK_PROCESS_CPUTIME_ID',
+ CLOCK_THREAD_CPUTIME_ID: 'CLOCK_THREAD_CPUTIME_ID',
+ CLOCK_MONOTONIC_RAW: 'CLOCK_MONOTONIC_RAW',
+ CLOCK_REALTIME_COARSE: 'CLOCK_REALTIME_COARSE',
+ CLOCK_MONOTONIC_COARSE: 'CLOCK_MONOTONIC_COARSE'
+}
+
+class ConditionVariablePrinter(object):
+ """Pretty printer for pthread_cond_t."""
+
+ def __init__(self, cond):
+ """Initialize the printer's internal data structures.
+
+ Args:
+ cond: A gdb.value representing a pthread_cond_t.
+ """
+
+ data = cond['__data']
+ self.total_seq = data['__total_seq']
+ self.mutex = data['__mutex']
+ self.nwaiters = data['__nwaiters']
+ self.values = []
+ self.read_values()
+
+ def to_string(self):
+ """gdb API function.
+
+ This is called from gdb when we try to print a pthread_cond_t.
+ """
+
+ return 'pthread_cond_t'
+
+ def children(self):
+ """gdb API function.
+
+ This is called from gdb when we try to print a pthread_cond_t.
+ """
+
+ return self.values
+
+ def read_values(self):
+ """Read the condvar's info and store it in self.values.
+
+ The data contained in self.values will be returned by the Iterator
+ created in self.children.
+ """
+
+ self.read_status()
+ self.read_attributes()
+ self.read_mutex_info()
+
+ def read_status(self):
+ """Read the status of the condvar.
+
+ This method reads whether the condvar is destroyed and how many threads
+ are waiting for it.
+ """
+
+ if self.total_seq == PTHREAD_COND_DESTROYED:
+ self.values.append(('Status', 'Destroyed'))
+
+ self.values.append(('Threads waiting for this condvar',
+ self.nwaiters >> COND_NWAITERS_SHIFT))
+
+ def read_attributes(self):
+ """Read the condvar's attributes."""
+
+ clock_id = self.nwaiters & ((1 << COND_NWAITERS_SHIFT) - 1)
+
+ # clock_id must be casted to int because it's a gdb.Value
+ self.values.append(('Clock ID', CLOCK_IDS[int(clock_id)]))
+
+ shared = (self.mutex == PTHREAD_COND_SHARED)
+
+ if shared:
+ self.values.append(('Shared', 'Yes'))
+ else:
+ self.values.append(('Shared', 'No'))
+
+ def read_mutex_info(self):
+ """Read the data of the mutex this condvar is bound to.
+
+ A pthread_cond_t's __data.__mutex member is a void * which
+ must be casted to pthread_mutex_t *. For shared condvars, this
+ member isn't recorded and has a value of ~0l instead.
+ """
+
+ if self.mutex and self.mutex != PTHREAD_COND_SHARED:
+ mutex_type = gdb.lookup_type('pthread_mutex_t')
+ mutex = self.mutex.cast(mutex_type.pointer()).dereference()
+
+ self.values.append(('Mutex', mutex))
+
+class ConditionVariableAttributesPrinter(object):
+ """Pretty printer for pthread_condattr_t.
+
+ In the NPTL this is a type that's always casted to struct pthread_condattr,
+ which has a single 'value' field containing the actual attributes.
+ """
+
+ def __init__(self, condattr):
+ """Initialize the printer's internal data structures.
+
+ Args:
+ condattr: A gdb.value representing a pthread_condattr_t.
+ """
+
+ condattr_struct = gdb.lookup_type('struct pthread_condattr')
+ self.condattr = condattr.cast(condattr_struct)['value']
+ self.values = []
+ self.read_values()
+
+ def to_string(self):
+ """gdb API function.
+
+ This is called from gdb when we try to print a pthread_condattr_t.
+ """
+
+ return 'pthread_condattr_t'
+
+ def children(self):
+ """gdb API function.
+
+ This is called from gdb when we try to print a pthread_condattr_t.
+ """
+
+ return self.values
+
+ def read_values(self):
+ """Read the condattr's info and store it in self.values.
+
+ The data contained in self.values will be returned by the Iterator
+ created in self.children.
+ """
+
+ clock_id = self.condattr & ((1 << COND_NWAITERS_SHIFT) - 1)
+
+ # clock_id must be casted to int because it's a gdb.Value
+ self.values.append(('Clock ID', CLOCK_IDS[int(clock_id)]))
+
+ if self.condattr & 1:
+ self.values.append(('Shared', 'Yes'))
+ else:
+ self.values.append(('Shared', 'No'))
+
+class RWLockPrinter(object):
+ """Pretty printer for pthread_rwlock_t."""
+
+ def __init__(self, rwlock):
+ """Initialize the printer's internal data structures.
+
+ Args:
+ rwlock: A gdb.value representing a pthread_rwlock_t.
+ """
+
+ data = rwlock['__data']
+ self.readers = data['__nr_readers']
+ self.queued_readers = data['__nr_readers_queued']
+ self.queued_writers = data['__nr_writers_queued']
+ self.writer_id = data['__writer']
+ self.shared = data['__shared']
+ self.prefers_writers = data['__flags']
+ self.values = []
+ self.read_values()
+
+ def to_string(self):
+ """gdb API function.
+
+ This is called from gdb when we try to print a pthread_rwlock_t.
+ """
+
+ return 'pthread_rwlock_t'
+
+ def children(self):
+ """gdb API function.
+
+ This is called from gdb when we try to print a pthread_rwlock_t.
+ """
+
+ return self.values
+
+ def read_values(self):
+ """Read the rwlock's info and store it in self.values.
+
+ The data contained in self.values will be returned by the Iterator
+ created in self.children.
+ """
+
+ self.read_status()
+ self.read_attributes()
+
+ def read_status(self):
+ """Read the status of the rwlock."""
+
+ # Right now pthread_rwlock_destroy doesn't do anything, so there's no
+ # way to check if an rwlock is destroyed.
+
+ if self.writer_id:
+ self.values.append(('Status', 'Locked (Write)'))
+ self.values.append(('Writer ID', self.writer_id))
+ elif self.readers:
+ self.values.append(('Status', 'Locked (Read)'))
+ self.values.append(('Readers', self.readers))
+ else:
+ self.values.append(('Status', 'Unlocked'))
+
+ self.values.append(('Queued readers', self.queued_readers))
+ self.values.append(('Queued writers', self.queued_writers))
+
+ def read_attributes(self):
+ """Read the attributes of the rwlock."""
+
+ if self.shared:
+ self.values.append(('Shared', 'Yes'))
+ else:
+ self.values.append(('Shared', 'No'))
+
+ if self.prefers_writers:
+ self.values.append(('Prefers', 'Writers'))
+ else:
+ self.values.append(('Prefers', 'Readers'))
+
+class RWLockAttributesPrinter(object):
+ """Pretty printer for pthread_rwlockattr_t.
+
+ In the NPTL this is a type that's always casted to
+ struct pthread_rwlockattr, which has two fields ('lockkind' and 'pshared')
+ containing the actual attributes.
+ """
+
+ def __init__(self, rwlockattr):
+ """Initialize the printer's internal data structures.
+
+ Args:
+ rwlockattr: A gdb.value representing a pthread_rwlockattr_t.
+ """
+
+ rwlockattr_struct = gdb.lookup_type('struct pthread_rwlockattr')
+ self.rwlockattr = rwlockattr.cast(rwlockattr_struct)
+ self.values = []
+ self.read_values()
+
+ def to_string(self):
+ """gdb API function.
+
+ This is called from gdb when we try to print a pthread_rwlockattr_t.
+ """
+
+ return 'pthread_rwlockattr_t'
+
+ def children(self):
+ """gdb API function.
+
+ This is called from gdb when we try to print a pthread_rwlockattr_t.
+ """
+
+ return self.values
+
+ def read_values(self):
+ """Read the rwlockattr's info and store it in self.values.
+
+ The data contained in self.values will be returned by the Iterator
+ created in self.children.
+ """
+
+ rwlock_type = self.rwlockattr['lockkind']
+ shared = self.rwlockattr['pshared']
+
+ if shared == PTHREAD_PROCESS_SHARED:
+ self.values.append(('Shared', 'Yes'))
+ else:
+ # PTHREAD_PROCESS_PRIVATE
+ self.values.append(('Shared', 'No'))
+
+ if (rwlock_type == PTHREAD_RWLOCK_PREFER_READER_NP or
+ rwlock_type == PTHREAD_RWLOCK_PREFER_WRITER_NP):
+ # This is a known bug. Using PTHREAD_RWLOCK_PREFER_WRITER_NP will
+ # still make the rwlock prefer readers.
+ self.values.append(('Prefers', 'Readers'))
+ elif rwlock_type == PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP:
+ self.values.append(('Prefers', 'Writers'))
+
+def register(objfile):
+ """Register the pretty printers within the given objfile."""
+
+ printer = gdb.printing.RegexpCollectionPrettyPrinter('glibc pthread locks')
+
+ printer.add_printer('pthread_mutex_t', r'^pthread_mutex_t$',
+ MutexPrinter)
+ printer.add_printer('pthread_mutexattr_t', r'^pthread_mutexattr_t$',
+ MutexAttributesPrinter)
+ printer.add_printer('pthread_cond_t', r'^pthread_cond_t$',
+ ConditionVariablePrinter)
+ printer.add_printer('pthread_condattr_t', r'^pthread_condattr_t$',
+ ConditionVariableAttributesPrinter)
+ printer.add_printer('pthread_rwlock_t', r'^pthread_rwlock_t$',
+ RWLockPrinter)
+ printer.add_printer('pthread_rwlockattr_t', r'^pthread_rwlockattr_t$',
+ RWLockAttributesPrinter)
+
+ gdb.printing.register_pretty_printer(objfile, printer)
+
+register(gdb.current_objfile())
new file mode 100644
@@ -0,0 +1,75 @@
+#include <pthreadP.h>
+
+-- Mutex types
+PTHREAD_MUTEX_KIND_MASK PTHREAD_MUTEX_KIND_MASK_NP
+PTHREAD_MUTEX_NORMAL
+PTHREAD_MUTEX_RECURSIVE PTHREAD_MUTEX_RECURSIVE_NP
+PTHREAD_MUTEX_ERRORCHECK PTHREAD_MUTEX_ERRORCHECK_NP
+PTHREAD_MUTEX_ADAPTIVE_NP
+
+-- Mutex status
+-- These are hardcoded all over the code; there are no enums/macros for them.
+PTHREAD_MUTEX_DESTROYED -1
+PTHREAD_MUTEX_UNLOCKED 0
+PTHREAD_MUTEX_LOCKED_NO_WAITERS 1
+
+-- For robust mutexes
+PTHREAD_MUTEX_INCONSISTENT
+PTHREAD_MUTEX_NOTRECOVERABLE
+FUTEX_OWNER_DIED
+
+-- For robust and PI mutexes
+FUTEX_WAITERS
+FUTEX_TID_MASK
+
+-- Mutex attributes
+PTHREAD_MUTEX_ROBUST_NORMAL_NP
+PTHREAD_MUTEX_PRIO_INHERIT_NP
+PTHREAD_MUTEX_PRIO_PROTECT_NP
+PTHREAD_MUTEX_PSHARED_BIT
+PTHREAD_MUTEX_PRIO_CEILING_SHIFT
+PTHREAD_MUTEX_PRIO_CEILING_MASK
+
+-- Mutex attribute flags
+PTHREAD_MUTEXATTR_PROTOCOL_SHIFT
+PTHREAD_MUTEXATTR_PROTOCOL_MASK
+PTHREAD_MUTEXATTR_PRIO_CEILING_MASK
+PTHREAD_MUTEXATTR_FLAG_ROBUST
+PTHREAD_MUTEXATTR_FLAG_PSHARED
+PTHREAD_MUTEXATTR_FLAG_BITS
+PTHREAD_MUTEX_NO_ELISION_NP
+
+-- Priority protocols
+PTHREAD_PRIO_NONE
+PTHREAD_PRIO_INHERIT
+PTHREAD_PRIO_PROTECT
+
+-- These values are hardcoded as well:
+-- Value of __mutex for shared condvars.
+PTHREAD_COND_SHARED ~0l
+
+-- Value of __total_seq for destroyed condvars.
+PTHREAD_COND_DESTROYED -1ull
+
+-- __nwaiters encodes the number of threads waiting on a condvar
+-- and the clock ID.
+-- __nwaiters >> COND_NWAITERS_SHIFT gives us the number of waiters.
+COND_NWAITERS_SHIFT
+
+-- Condvar clock IDs
+CLOCK_REALTIME
+CLOCK_MONOTONIC
+CLOCK_PROCESS_CPUTIME_ID
+CLOCK_THREAD_CPUTIME_ID
+CLOCK_MONOTONIC_RAW
+CLOCK_REALTIME_COARSE
+CLOCK_MONOTONIC_COARSE
+
+-- Rwlock attributes
+PTHREAD_RWLOCK_PREFER_READER_NP
+PTHREAD_RWLOCK_PREFER_WRITER_NP
+PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP
+
+-- 'Shared' attribute values
+PTHREAD_PROCESS_PRIVATE
+PTHREAD_PROCESS_SHARED
new file mode 100644
@@ -0,0 +1,82 @@
+# Makefile for the Python pretty printers.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+# This contains rules for building and running the pretty printer tests.
+
+subdir := pretty-printers
+tests-need-hardcoded-path := yes
+
+include ../Makeconfig
+
+PYTHON := python
+
+tests-pretty-printers := test-mutex-attributes test-mutex-printer \
+ test-condvar-attributes test-condvar-printer \
+ test-rwlock-attributes test-rwlock-printer
+
+# Add the test programs to test-srcs so that they'll be compiled regardless
+# of whether we should actually run them.
+test-srcs := $(tests-pretty-printers)
+
+ifeq ($(build-shared),yes)
+nptl-tests-libs := $(shared-thread-library)
+else
+nptl-tests-libs := $(static-thread-library)
+endif
+
+# The test programs need to be compiled without optimizations so they won't
+# confuse gdb. We could use either the 'GCC optimize' pragma or the 'optimize'
+# function attribute to achieve this; however, at least on ARM, gcc always
+# produces different debugging symbols when invoked with a -O greater than 0
+# than when invoked with -O0, regardless of anything else we're using
+# to suppress optimizations. Therefore, we need to explicitly pass -O0 to it
+# through CFLAGS.
+# Additionally, the build system will try to -include $(common-objpfx)/config.h
+# when compiling the tests, which will throw an error if some special macros
+# (such as __OPTIMIZE__ and IS_IN_BUILD) aren't defined. To avoid this, we
+# tell gcc to define IS_IN_build.
+CFLAGS-test-mutex-attributes.c := -O0 -ggdb3 -DIS_IN_build
+CFLAGS-test-mutex-printer.c := -O0 -ggdb3 -DIS_IN_build
+CFLAGS-test-condvar-attributes.c := -O0 -ggdb3 -DIS_IN_build
+CFLAGS-test-condvar-printer.c := -O0 -ggdb3 -DIS_IN_build
+CFLAGS-test-rwlock-attributes.c := -O0 -ggdb3 -DIS_IN_build
+CFLAGS-test-rwlock-printer.c := -O0 -ggdb3 -DIS_IN_build
+
+tests-pretty-printers-dest := $(addprefix $(objpfx),$(tests-pretty-printers))
+tests-pretty-printers-pp := $(addsuffix -pp,$(tests-pretty-printers-dest))
+
+ifeq ($(run-built-tests),yes)
+tests-special += $(tests-pretty-printers-pp)
+endif
+
+include ../Rules
+
+# Add the thread libraries to the prerequisites of the NPTL test programs.
+$(tests-pretty-printers-dest): $(nptl-tests-libs)
+
+# We won't actually create any *-pp files, so we mark this target as PHONY
+# to ensure it always runs when required.
+.PHONY: $(tests-pretty-printers-pp)
+
+# Static pattern rule that matches the test-* targets to their .c and .py
+# prerequisites. It'll run the corresponding test script for each test program
+# we compiled. test_common.py must be present for all.
+$(tests-pretty-printers-pp): $(objpfx)%-pp: $(objpfx)% %.py test_common.py
+ $(test-wrapper-env) $(PYTHON) $*.py $*.c $(objpfx)$*; \
+ $(evaluate-test)
new file mode 100644
@@ -0,0 +1,130 @@
+README for the glibc Python pretty printers
+===========================================
+
+Pretty printers are gdb extensions that allow it to print useful, human-readable
+information about a program's variables. For example, for a pthread_mutex_t
+gdb would usually output something like this:
+
+(gdb) print mutex
+$1 = {
+ __data = {
+ __lock = 22020096,
+ __count = 0,
+ __owner = 0,
+ __nusers = 0,
+ __kind = 576,
+ __spins = 0,
+ __elision = 0,
+ __list = {
+ __prev = 0x0,
+ __next = 0x0
+ }
+ },
+ __size = "\000\000P\001", '\000' <repeats 12 times>, "@\002", '\000' <repeats 21 times>,
+ __align = 22020096
+}
+
+However, with a pretty printer gdb will output something like this:
+
+(gdb) print mutex
+$1 = pthread_mutex_t = {
+ Type = Normal,
+ Status = Unlocked,
+ Robust = No,
+ Shared = No,
+ Protocol = Priority protect,
+ Priority ceiling = 42
+}
+
+Before printing a value, gdb will first check if there's a pretty printer
+registered for it. If there is, it'll use it, otherwise it'll print the value
+as usual. Pretty printers can be registered in various ways; for our purposes
+we register them for the current objfile by calling
+gdb.printing.register_pretty_printer().
+
+Currently our printers are based on gdb.RegexpCollectionPrettyPrinter, which
+means they'll be triggered if the type of the variable we're printing matches
+a given regular expression. For example, MutexPrinter will be triggered if
+our variable's type matches the regexp '^pthread_mutex_t$'.
+
+Besides the printers themselves, each module may have a constants file which the
+printers will import. These constants are generated from C headers during the
+build process, and need to be in the Python search path when loading the
+printers.
+
+
+Installing and loading
+======================
+
+The pretty printers and their constant files may be installed in different paths
+for each distro, though gdb should be able to automatically load them by itself.
+When in doubt, you can use the 'info pretty printer' gdb command to list the
+loaded pretty printers.
+
+If the printers aren't automatically loaded for some reason, you should add the
+following to your .gdbinit:
+
+python
+import sys
+sys.path.insert(0, '/path/to/constants/file/directory')
+end
+
+source /path/to/printers.py
+
+If you're building glibc manually, '/path/to/constants/file/directory' should be
+'/path/to/glibc-build/submodule', where 'submodule' is e.g. nptl.
+
+
+Testing
+=======
+
+The pretty printers come with a small test suite based on PExpect, which is a
+Python module with Expect-like features for spawning and controlling interactive
+programs. Each printer has a corresponding C program and a Python script
+that uses PExpect to drive gdb through the program and compare its output to
+the expected printer's.
+
+The tests run on the glibc host, which is assumed to have both gdb and PExpect;
+if any of those is absent the tests will fail with code 77 (UNSUPPORTED).
+Native builds can be tested simply by doing 'make check'; cross builds must use
+cross-test-ssh.sh as test-wrapper, like this:
+
+make test-wrapper='/path/to/scripts/cross-test-ssh.sh user@host' check
+
+(Remember to share the build system's filesystem with the glibc host's through
+NFS or something similar).
+
+Running 'make check' on a cross build will only compile the test programs,
+without running the scripts.
+
+
+Known issues
+============
+
+* Pretty printers are inherently coupled to the code they're targetting, thus
+any changes to the target code must also update the corresponding printers.
+On the plus side, the printer code itself may serve as a kind of documentation
+for the target code.
+
+* Older versions of the gdb Python API have a bug where
+gdb.RegexpCollectionPrettyPrinter would not be able to get a value's real type
+if it was typedef'd. This would cause gdb to ignore the pretty printers for
+types like pthread_mutex_t, which is defined as:
+
+typedef union
+{
+ ...
+} pthread_mutex_t;
+
+This was fixed in commit 1b588015839caafc608a6944a78aea170f5fb2f6. However,
+typedef'ing an already typedef'd type may cause a similar issue, e.g.:
+
+typedef pthread_mutex_t mutex;
+mutex a_mutex;
+
+Here, trying to print a_mutex won't trigger the pthread_mutex_t printer.
+
+* The test programs must be compiled without optimizations. This is necessary
+because the test scripts rely on the C code structure being preserved when
+stepping through the programs. Things like aggressive instruction reordering
+or optimizing variables out may make this kind of testing impossible.
new file mode 100644
@@ -0,0 +1,94 @@
+/* Helper program for testing the pthread_cond_t and pthread_condattr_t
+ pretty printers.
+
+ Copyright (C) 2016 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+/* Keep the calls to the pthread_* functions on separate lines to make it easy
+ to advance through the program using the gdb 'next' command. */
+
+#include <time.h>
+#include <pthread.h>
+
+#define PASS 0
+#define FAIL 1
+
+static int condvar_reinit (pthread_cond_t *condvar,
+ const pthread_condattr_t *attr);
+static int test_setclock (pthread_cond_t *condvar, pthread_condattr_t *attr);
+static int test_setpshared (pthread_cond_t *condvar, pthread_condattr_t *attr);
+
+/* Need these so we don't have lines longer than 79 chars. */
+#define SET_SHARED(attr, shared) pthread_condattr_setpshared (attr, shared)
+
+int
+main (void)
+{
+ pthread_cond_t condvar;
+ pthread_condattr_t attr;
+ int result = FAIL;
+
+ if (pthread_condattr_init (&attr) == 0
+ && pthread_cond_init (&condvar, NULL) == 0
+ && test_setclock (&condvar, &attr) == PASS
+ && test_setpshared (&condvar, &attr) == PASS)
+ result = PASS;
+ /* Else, one of the pthread_cond* functions failed. */
+
+ return result;
+}
+
+/* Destroys CONDVAR and re-initializes it using ATTR. */
+static int
+condvar_reinit (pthread_cond_t *condvar, const pthread_condattr_t *attr)
+{
+ int result = FAIL;
+
+ if (pthread_cond_destroy (condvar) == 0
+ && pthread_cond_init (condvar, attr) == 0)
+ result = PASS;
+
+ return result;
+}
+
+/* Tests setting the clock ID attribute. */
+static int
+test_setclock (pthread_cond_t *condvar, pthread_condattr_t *attr)
+{
+ int result = FAIL;
+
+ if (pthread_condattr_setclock (attr, CLOCK_REALTIME) == 0 /* Set clock. */
+ && condvar_reinit (condvar, attr) == PASS)
+ result = PASS;
+
+ return result;
+}
+
+/* Tests setting whether the condvar can be shared between processes. */
+static int
+test_setpshared (pthread_cond_t *condvar, pthread_condattr_t *attr)
+{
+ int result = FAIL;
+
+ if (SET_SHARED (attr, PTHREAD_PROCESS_SHARED) == 0 /* Set shared. */
+ && condvar_reinit (condvar, attr) == PASS
+ && SET_SHARED (attr, PTHREAD_PROCESS_PRIVATE) == 0
+ && condvar_reinit (condvar, attr) == PASS)
+ result = PASS;
+
+ return result;
+}
new file mode 100644
@@ -0,0 +1,60 @@
+# Common tests for the ConditionVariablePrinter and
+# ConditionVariableAttributesPrinter classes.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+import sys
+
+from test_common import *
+
+test_source = sys.argv[1]
+test_bin = sys.argv[2]
+result = PASS
+
+try:
+ init_test(test_bin)
+ go_to_main()
+
+ condvar_var = 'condvar'
+ condvar_to_string = 'pthread_cond_t'
+
+ attr_var = 'attr'
+ attr_to_string = 'pthread_condattr_t'
+
+ break_at(test_source, 'Set clock')
+ continue_cmd() # Go to test_setclock
+ next_cmd(2)
+ test_printer(condvar_var, condvar_to_string, {'Clock ID': 'CLOCK_REALTIME'})
+ test_printer(attr_var, attr_to_string, {'Clock ID': 'CLOCK_REALTIME'})
+
+ break_at(test_source, 'Set shared')
+ continue_cmd() # Go to test_setpshared
+ next_cmd(2)
+ test_printer(condvar_var, condvar_to_string, {'Shared': 'Yes'})
+ test_printer(attr_var, attr_to_string, {'Shared': 'Yes'})
+ next_cmd(2)
+ test_printer(condvar_var, condvar_to_string, {'Shared': 'No'})
+ test_printer(attr_var, attr_to_string, {'Shared': 'No'})
+
+ continue_cmd() # Exit
+
+except (NoLineError, pexpect.TIMEOUT) as exception:
+ print('Error: {0}'.format(exception))
+ result = FAIL
+
+exit(result)
new file mode 100644
@@ -0,0 +1,57 @@
+/* Helper program for testing the pthread_cond_t pretty printer.
+
+ Copyright (C) 2016 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+/* Keep the calls to the pthread_* functions on separate lines to make it easy
+ to advance through the program using the gdb 'next' command. */
+
+#include <time.h>
+#include <pthread.h>
+
+#define PASS 0
+#define FAIL 1
+
+static int test_status_destroyed (pthread_cond_t *condvar);
+
+int
+main (void)
+{
+ pthread_cond_t condvar;
+ pthread_condattr_t attr;
+ int result = FAIL;
+
+ if (pthread_condattr_init (&attr) == 0
+ && test_status_destroyed (&condvar) == PASS)
+ result = PASS;
+ /* Else, one of the pthread_cond* functions failed. */
+
+ return result;
+}
+
+/* Initializes CONDVAR, then destroys it. */
+static int
+test_status_destroyed (pthread_cond_t *condvar)
+{
+ int result = FAIL;
+
+ if (pthread_cond_init (condvar, NULL) == 0
+ && pthread_cond_destroy (condvar) == 0)
+ result = PASS; /* Test status (destroyed). */
+
+ return result;
+}
new file mode 100644
@@ -0,0 +1,45 @@
+# Common tests for the ConditionVariablePrinter class.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+import sys
+
+from test_common import *
+
+test_source = sys.argv[1]
+test_bin = sys.argv[2]
+result = PASS
+
+try:
+ init_test(test_bin)
+ go_to_main()
+
+ var = 'condvar'
+ to_string = 'pthread_cond_t'
+
+ break_at(test_source, 'Test status (destroyed)')
+ continue_cmd() # Go to test_status_destroyed
+ test_printer(var, to_string, {'Status': 'Destroyed'})
+
+ continue_cmd() # Exit
+
+except (NoLineError, pexpect.TIMEOUT) as exception:
+ print('Error: {0}'.format(exception))
+ result = FAIL
+
+exit(result)
new file mode 100644
@@ -0,0 +1,144 @@
+/* Helper program for testing the pthread_mutex_t and pthread_mutexattr_t
+ pretty printers.
+
+ Copyright (C) 2016 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+/* Keep the calls to the pthread_* functions on separate lines to make it easy
+ to advance through the program using the gdb 'next' command. */
+
+#include <pthread.h>
+
+#define PASS 0
+#define FAIL 1
+#define PRIOCEILING 42
+
+/* Need these so we don't have lines longer than 79 chars. */
+#define SET_TYPE(attr, type) pthread_mutexattr_settype (attr, type)
+#define SET_ROBUST(attr, robust) pthread_mutexattr_setrobust (attr, robust)
+#define SET_SHARED(attr, shared) pthread_mutexattr_setpshared (attr, shared)
+#define SET_PROTOCOL(attr, protocol) \
+ pthread_mutexattr_setprotocol (attr, protocol)
+#define SET_PRIOCEILING(mutex, prioceiling, old_ceiling) \
+ pthread_mutex_setprioceiling (mutex, prioceiling, old_ceiling)
+
+static int mutex_reinit (pthread_mutex_t *mutex,
+ const pthread_mutexattr_t *attr);
+static int test_settype (pthread_mutex_t *mutex, pthread_mutexattr_t *attr);
+static int test_setrobust (pthread_mutex_t *mutex, pthread_mutexattr_t *attr);
+static int test_setpshared (pthread_mutex_t *mutex, pthread_mutexattr_t *attr);
+static int test_setprotocol (pthread_mutex_t *mutex,
+ pthread_mutexattr_t *attr);
+
+int
+main (void)
+{
+ pthread_mutex_t mutex;
+ pthread_mutexattr_t attr;
+ int result = FAIL;
+
+ if (pthread_mutexattr_init (&attr) == 0
+ && pthread_mutex_init (&mutex, NULL) == 0
+ && test_settype (&mutex, &attr) == PASS
+ && test_setrobust (&mutex, &attr) == PASS
+ && test_setpshared (&mutex, &attr) == PASS
+ && test_setprotocol (&mutex, &attr) == PASS)
+ result = PASS;
+ /* Else, one of the pthread_mutex* functions failed. */
+
+ return result;
+}
+
+/* Destroys MUTEX and re-initializes it using ATTR. */
+static int
+mutex_reinit (pthread_mutex_t *mutex, const pthread_mutexattr_t *attr)
+{
+ int result = FAIL;
+
+ if (pthread_mutex_destroy (mutex) == 0
+ && pthread_mutex_init (mutex, attr) == 0)
+ result = PASS;
+
+ return result;
+}
+
+/* Tests setting the mutex type. */
+static int
+test_settype (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+ int result = FAIL;
+
+ if (SET_TYPE (attr, PTHREAD_MUTEX_ERRORCHECK) == 0 /* Set type. */
+ && mutex_reinit (mutex, attr) == 0
+ && SET_TYPE (attr, PTHREAD_MUTEX_RECURSIVE) == 0
+ && mutex_reinit (mutex, attr) == 0
+ && SET_TYPE (attr, PTHREAD_MUTEX_NORMAL) == 0
+ && mutex_reinit (mutex, attr) == 0)
+ result = PASS;
+
+ return result;
+}
+
+/* Tests setting whether the mutex is robust. */
+static int
+test_setrobust (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+ int result = FAIL;
+
+ if (SET_ROBUST (attr, PTHREAD_MUTEX_ROBUST) == 0 /* Set robust. */
+ && mutex_reinit (mutex, attr) == 0
+ && SET_ROBUST (attr, PTHREAD_MUTEX_STALLED) == 0
+ && mutex_reinit (mutex, attr) == 0)
+ result = PASS;
+
+ return result;
+}
+
+/* Tests setting whether the mutex can be shared between processes. */
+static int
+test_setpshared (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+ int result = FAIL;
+
+ if (SET_SHARED (attr, PTHREAD_PROCESS_SHARED) == 0 /* Set shared. */
+ && mutex_reinit (mutex, attr) == 0
+ && SET_SHARED (attr, PTHREAD_PROCESS_PRIVATE) == 0
+ && mutex_reinit (mutex, attr) == 0)
+ result = PASS;
+
+ return result;
+}
+
+/* Tests setting the mutex protocol and, for Priority Protect, the Priority
+ Ceiling. */
+static int
+test_setprotocol (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+ int result = FAIL;
+ int old_prioceiling;
+
+ if (SET_PROTOCOL (attr, PTHREAD_PRIO_INHERIT) == 0 /* Set protocol. */
+ && mutex_reinit (mutex, attr) == 0
+ && SET_PROTOCOL (attr, PTHREAD_PRIO_PROTECT) == 0
+ && mutex_reinit (mutex, attr) == 0
+ && SET_PRIOCEILING(mutex, PRIOCEILING, &old_prioceiling) == 0
+ && SET_PROTOCOL (attr, PTHREAD_PRIO_NONE) == 0
+ && mutex_reinit (mutex, attr) == 0)
+ result = PASS;
+
+ return result;
+}
new file mode 100644
@@ -0,0 +1,90 @@
+# Common tests for the MutexPrinter and MutexAttributesPrinter classes.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+import sys
+
+from test_common import *
+
+test_source = sys.argv[1]
+test_bin = sys.argv[2]
+result = PASS
+PRIOCEILING = 42
+
+try:
+ init_test(test_bin)
+ go_to_main()
+
+ mutex_var = 'mutex'
+ mutex_to_string = 'pthread_mutex_t'
+
+ attr_var = 'attr'
+ attr_to_string = 'pthread_mutexattr_t'
+
+ break_at(test_source, 'Set type')
+ continue_cmd() # Go to test_settype
+ next_cmd(2)
+ test_printer(attr_var, attr_to_string, {'Type': 'Error check'})
+ test_printer(mutex_var, mutex_to_string, {'Type': 'Error check'})
+ next_cmd(2)
+ test_printer(attr_var, attr_to_string, {'Type': 'Recursive'})
+ test_printer(mutex_var, mutex_to_string, {'Type': 'Recursive'})
+ next_cmd(2)
+ test_printer(attr_var, attr_to_string, {'Type': 'Normal'})
+ test_printer(mutex_var, mutex_to_string, {'Type': 'Normal'})
+
+ break_at(test_source, 'Set robust')
+ continue_cmd() # Go to test_setrobust
+ next_cmd(2)
+ test_printer(attr_var, attr_to_string, {'Robust': 'Yes'})
+ test_printer(mutex_var, mutex_to_string, {'Robust': 'Yes'})
+ next_cmd(2)
+ test_printer(attr_var, attr_to_string, {'Robust': 'No'})
+ test_printer(mutex_var, mutex_to_string, {'Robust': 'No'})
+
+ break_at(test_source, 'Set shared')
+ continue_cmd() # Go to test_setpshared
+ next_cmd(2)
+ test_printer(attr_var, attr_to_string, {'Shared': 'Yes'})
+ test_printer(mutex_var, mutex_to_string, {'Shared': 'Yes'})
+ next_cmd(2)
+ test_printer(attr_var, attr_to_string, {'Shared': 'No'})
+ test_printer(mutex_var, mutex_to_string, {'Shared': 'No'})
+
+ break_at(test_source, 'Set protocol')
+ continue_cmd() # Go to test_setprotocol
+ next_cmd(2)
+ test_printer(attr_var, attr_to_string, {'Protocol': 'Priority inherit'})
+ test_printer(mutex_var, mutex_to_string, {'Protocol': 'Priority inherit'})
+ next_cmd(2)
+ test_printer(attr_var, attr_to_string, {'Protocol': 'Priority protect'})
+ test_printer(mutex_var, mutex_to_string, {'Protocol': 'Priority protect'})
+ next_cmd(2)
+ test_printer(mutex_var, mutex_to_string, {'Priority ceiling':
+ str(PRIOCEILING)})
+ next_cmd()
+ test_printer(attr_var, attr_to_string, {'Protocol': 'None'})
+ test_printer(mutex_var, mutex_to_string, {'Protocol': 'None'})
+
+ continue_cmd() # Exit
+
+except (NoLineError, pexpect.TIMEOUT) as exception:
+ print('Error: {0}'.format(exception))
+ result = FAIL
+
+exit(result)
new file mode 100644
@@ -0,0 +1,151 @@
+/* Helper program for testing the pthread_mutex_t pretty printer.
+
+ Copyright (C) 2016 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+/* Keep the calls to the pthread_* functions on separate lines to make it easy
+ to advance through the program using the gdb 'next' command. */
+
+#include <stdlib.h>
+#include <errno.h>
+#include <pthread.h>
+
+#define PASS 0
+#define FAIL 1
+
+static int test_status_destroyed (pthread_mutex_t *mutex);
+static int test_status_no_robust (pthread_mutex_t *mutex,
+ pthread_mutexattr_t *attr);
+static int test_status_robust (pthread_mutex_t *mutex,
+ pthread_mutexattr_t *attr);
+static int test_locking_state_robust (pthread_mutex_t *mutex);
+static void *thread_func (void *arg);
+static int test_recursive_locks (pthread_mutex_t *mutex,
+ pthread_mutexattr_t *attr);
+
+int
+main (void)
+{
+ pthread_mutex_t mutex;
+ pthread_mutexattr_t attr;
+ int result = FAIL;
+
+ if (pthread_mutexattr_init (&attr) == 0
+ && test_status_destroyed (&mutex) == PASS
+ && test_status_no_robust (&mutex, &attr) == PASS
+ && test_status_robust (&mutex, &attr) == PASS
+ && test_recursive_locks (&mutex, &attr) == PASS)
+ result = PASS;
+ /* Else, one of the pthread_mutex* functions failed. */
+
+ return result;
+}
+
+/* Initializes MUTEX, then destroys it. */
+static int
+test_status_destroyed (pthread_mutex_t *mutex)
+{
+ int result = FAIL;
+
+ if (pthread_mutex_init (mutex, NULL) == 0
+ && pthread_mutex_destroy (mutex) == 0)
+ result = PASS; /* Test status (destroyed). */
+
+ return result;
+}
+
+/* Tests locking of non-robust mutexes. */
+static int
+test_status_no_robust (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+ int result = FAIL;
+
+ if (pthread_mutexattr_setrobust (attr, PTHREAD_MUTEX_STALLED) == 0
+ && pthread_mutex_init (mutex, attr) == 0
+ && pthread_mutex_lock (mutex) == 0 /* Test status (non-robust). */
+ && pthread_mutex_unlock (mutex) == 0
+ && pthread_mutex_destroy (mutex) == 0)
+ result = PASS;
+
+ return result;
+}
+
+/* Tests locking of robust mutexes. */
+static int
+test_status_robust (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+ int result = FAIL;
+
+ if (pthread_mutexattr_setrobust (attr, PTHREAD_MUTEX_ROBUST) == 0
+ && pthread_mutex_init (mutex, attr) == 0
+ && test_locking_state_robust (mutex) == PASS /* Test status (robust). */
+ && pthread_mutex_destroy (mutex) == 0)
+ result = PASS;
+
+ return result;
+}
+
+/* Tests locking and state corruption of robust mutexes. We'll mark it as
+ inconsistent, then not recoverable. */
+static int
+test_locking_state_robust (pthread_mutex_t *mutex)
+{
+ int result = FAIL;
+ pthread_t thread;
+
+ if (pthread_create (&thread, NULL, thread_func, mutex) == 0 /* Create. */
+ && pthread_join (thread, NULL) == 0
+ && pthread_mutex_lock (mutex) == EOWNERDEAD /* Test locking (robust). */
+ && pthread_mutex_unlock (mutex) == 0)
+ result = PASS;
+
+ return result;
+}
+
+/* Function to be called by the child thread when testing robust mutexes. */
+static void *
+thread_func (void *arg)
+{
+ pthread_mutex_t *mutex = (pthread_mutex_t *)arg;
+
+ if (pthread_mutex_lock (mutex) != 0) /* Thread function. */
+ exit (FAIL);
+
+ /* Thread terminates without unlocking the mutex, thus marking it as
+ inconsistent. */
+ return NULL;
+}
+
+/* Tests locking the mutex multiple times in a row. */
+static int
+test_recursive_locks (pthread_mutex_t *mutex, pthread_mutexattr_t *attr)
+{
+ int result = FAIL;
+
+ if (pthread_mutexattr_settype (attr, PTHREAD_MUTEX_RECURSIVE) == 0
+ && pthread_mutex_init (mutex, attr) == 0
+ && pthread_mutex_lock (mutex) == 0
+ && pthread_mutex_lock (mutex) == 0
+ && pthread_mutex_lock (mutex) == 0 /* Test recursive locks. */
+ && pthread_mutex_unlock (mutex) == 0
+ && pthread_mutex_unlock (mutex) == 0
+ && pthread_mutex_unlock (mutex) == 0
+ && pthread_mutex_destroy (mutex) == 0)
+ result = PASS;
+
+ return result;
+}
new file mode 100644
@@ -0,0 +1,92 @@
+# Tests for the MutexPrinter class.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+import sys
+
+from test_common import *
+
+test_source = sys.argv[1]
+test_bin = sys.argv[2]
+result = PASS
+
+try:
+ init_test(test_bin)
+ go_to_main()
+
+ var = 'mutex'
+ to_string = 'pthread_mutex_t'
+
+ break_at(test_source, 'Test status (destroyed)')
+ continue_cmd() # Go to test_status_destroyed
+ test_printer(var, to_string, {'Status': 'Destroyed'})
+
+ break_at(test_source, 'Test status (non-robust)')
+ continue_cmd() # Go to test_status_no_robust
+ test_printer(var, to_string, {'Status': 'Unlocked'})
+ next_cmd()
+ thread_id = get_current_thread_lwpid()
+ test_printer(var, to_string, {'Status': 'Locked, possibly with no waiters',
+ 'Owner ID': thread_id})
+
+ break_at(test_source, 'Test status (robust)')
+ continue_cmd() # Go to test_status_robust
+ test_printer(var, to_string, {'Status': 'Unlocked'})
+
+ # We'll now test the robust mutex locking states. We'll create a new
+ # thread that will lock a robust mutex and exit without unlocking it.
+ break_at(test_source, 'Create')
+ continue_cmd() # Go to test_locking_state_robust
+ # Set a breakpoint for the new thread to hit.
+ break_at(test_source, 'Thread function')
+ continue_cmd()
+ # By now the new thread is created and has hit its breakpoint.
+ set_scheduler_locking(True)
+ parent = '1'
+ child = '2'
+ select_thread(child)
+ child_id = get_current_thread_lwpid()
+ # We've got the new thread's ID.
+ select_thread(parent)
+ # Make the new thread finish its function while we wait.
+ continue_cmd(thread=child)
+ # The new thread should be dead by now.
+ break_at(test_source, 'Test locking (robust)')
+ continue_cmd()
+ test_printer(var, to_string, {'Owner ID': r'{0} \(dead\)'.format(child_id)})
+ # Try to lock and unlock the mutex.
+ next_cmd()
+ test_printer(var, to_string, {'Owner ID': thread_id,
+ 'State protected by this mutex': 'Inconsistent'})
+ next_cmd()
+ test_printer(var, to_string, {'Status': 'Unlocked',
+ 'State protected by this mutex': 'Not recoverable'})
+ set_scheduler_locking(False)
+
+ break_at(test_source, 'Test recursive locks')
+ continue_cmd() # Go to test_recursive_locks
+ test_printer(var, to_string, {'Times locked recursively': '2'})
+ next_cmd()
+ test_printer(var, to_string, {'Times locked recursively': '3'})
+ continue_cmd() # Exit
+
+except (NoLineError, pexpect.TIMEOUT) as exception:
+ print('Error: {0}'.format(exception))
+ result = FAIL
+
+exit(result)
new file mode 100644
@@ -0,0 +1,98 @@
+/* Helper program for testing the pthread_rwlock_t and pthread_rwlockattr_t
+ pretty printers.
+
+ Copyright (C) 2016 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+/* Keep the calls to the pthread_* functions on separate lines to make it easy
+ to advance through the program using the gdb 'next' command. */
+
+#include <pthread.h>
+
+#define PASS 0
+#define FAIL 1
+
+/* Need these so we don't have lines longer than 79 chars. */
+#define SET_KIND(attr, kind) pthread_rwlockattr_setkind_np (attr, kind)
+#define SET_SHARED(attr, shared) pthread_rwlockattr_setpshared (attr, shared)
+
+static int rwlock_reinit (pthread_rwlock_t *rwlock,
+ const pthread_rwlockattr_t *attr);
+static int test_setkind_np (pthread_rwlock_t *rwlock,
+ pthread_rwlockattr_t *attr);
+static int test_setpshared (pthread_rwlock_t *rwlock,
+ pthread_rwlockattr_t *attr);
+
+int
+main (void)
+{
+ pthread_rwlock_t rwlock;
+ pthread_rwlockattr_t attr;
+ int result = FAIL;
+
+ if (pthread_rwlockattr_init (&attr) == 0
+ && pthread_rwlock_init (&rwlock, NULL) == 0
+ && test_setkind_np (&rwlock, &attr) == PASS
+ && test_setpshared (&rwlock, &attr) == PASS)
+ result = PASS;
+ /* Else, one of the pthread_rwlock* functions failed. */
+
+ return result;
+}
+
+/* Destroys RWLOCK and re-initializes it using ATTR. */
+static int
+rwlock_reinit (pthread_rwlock_t *rwlock, const pthread_rwlockattr_t *attr)
+{
+ int result = FAIL;
+
+ if (pthread_rwlock_destroy (rwlock) == 0
+ && pthread_rwlock_init (rwlock, attr) == 0)
+ result = PASS;
+
+ return result;
+}
+
+/* Tests setting whether the rwlock prefers readers or writers. */
+static int
+test_setkind_np (pthread_rwlock_t *rwlock, pthread_rwlockattr_t *attr)
+{
+ int result = FAIL;
+
+ if (SET_KIND (attr, PTHREAD_RWLOCK_PREFER_READER_NP) == 0 /* Set kind. */
+ && rwlock_reinit (rwlock, attr) == PASS
+ && SET_KIND (attr, PTHREAD_RWLOCK_PREFER_WRITER_NONRECURSIVE_NP) == 0
+ && rwlock_reinit (rwlock, attr) == PASS)
+ result = PASS;
+
+ return result;
+}
+
+/* Tests setting whether the rwlock can be shared between processes. */
+static int
+test_setpshared (pthread_rwlock_t *rwlock, pthread_rwlockattr_t *attr)
+{
+ int result = FAIL;
+
+ if (SET_SHARED (attr, PTHREAD_PROCESS_SHARED) == 0 /* Set shared. */
+ && rwlock_reinit (rwlock, attr) == PASS
+ && SET_SHARED (attr, PTHREAD_PROCESS_PRIVATE) == 0
+ && rwlock_reinit (rwlock, attr) == PASS)
+ result = PASS;
+
+ return result;
+}
new file mode 100644
@@ -0,0 +1,62 @@
+# Common tests for the RWLockPrinter and RWLockAttributesPrinter classes.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+import sys
+
+from test_common import *
+
+test_source = sys.argv[1]
+test_bin = sys.argv[2]
+result = PASS
+
+try:
+ init_test(test_bin)
+ go_to_main()
+
+ rwlock_var = 'rwlock'
+ rwlock_to_string = 'pthread_rwlock_t'
+
+ attr_var = 'attr'
+ attr_to_string = 'pthread_rwlockattr_t'
+
+ break_at(test_source, 'Set kind')
+ continue_cmd() # Go to test_setkind_np
+ next_cmd(2)
+ test_printer(rwlock_var, rwlock_to_string, {'Prefers': 'Readers'})
+ test_printer(attr_var, attr_to_string, {'Prefers': 'Readers'})
+ next_cmd(2)
+ test_printer(rwlock_var, rwlock_to_string, {'Prefers': 'Writers'})
+ test_printer(attr_var, attr_to_string, {'Prefers': 'Writers'})
+
+ break_at(test_source, 'Set shared')
+ continue_cmd() # Go to test_setpshared
+ next_cmd(2)
+ test_printer(rwlock_var, rwlock_to_string, {'Shared': 'Yes'})
+ test_printer(attr_var, attr_to_string, {'Shared': 'Yes'})
+ next_cmd(2)
+ test_printer(rwlock_var, rwlock_to_string, {'Shared': 'No'})
+ test_printer(attr_var, attr_to_string, {'Shared': 'No'})
+
+ continue_cmd() # Exit
+
+except (NoLineError, pexpect.TIMEOUT) as exception:
+ print('Error: {0}'.format(exception))
+ result = FAIL
+
+exit(result)
new file mode 100644
@@ -0,0 +1,78 @@
+/* Helper program for testing the pthread_rwlock_t pretty printer.
+
+ Copyright (C) 2016 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+/* Keep the calls to the pthread_* functions on separate lines to make it easy
+ to advance through the program using the gdb 'next' command. */
+
+#include <pthread.h>
+
+#define PASS 0
+#define FAIL 1
+
+static int test_locking_reader (pthread_rwlock_t *rwlock);
+static int test_locking_writer (pthread_rwlock_t *rwlock);
+
+int
+main (void)
+{
+ pthread_rwlock_t rwlock;
+
+ int result = FAIL;
+
+ if (test_locking_reader (&rwlock) == PASS
+ && test_locking_writer (&rwlock) == PASS)
+ result = PASS;
+ /* Else, one of the pthread_rwlock* functions failed. */
+
+ return result;
+}
+
+/* Tests locking the rwlock multiple times as a reader. */
+static int
+test_locking_reader (pthread_rwlock_t *rwlock)
+{
+ int result = FAIL;
+
+ if (pthread_rwlock_init (rwlock, NULL) == 0
+ && pthread_rwlock_rdlock (rwlock) == 0 /* Test locking (reader). */
+ && pthread_rwlock_rdlock (rwlock) == 0
+ && pthread_rwlock_rdlock (rwlock) == 0
+ && pthread_rwlock_unlock (rwlock) == 0
+ && pthread_rwlock_unlock (rwlock) == 0
+ && pthread_rwlock_unlock (rwlock) == 0
+ && pthread_rwlock_destroy (rwlock) == 0)
+ result = PASS;
+
+ return result;
+}
+
+/* Tests locking the rwlock as a writer. */
+static int
+test_locking_writer (pthread_rwlock_t *rwlock)
+{
+ int result = FAIL;
+
+ if (pthread_rwlock_init (rwlock, NULL) == 0
+ && pthread_rwlock_wrlock (rwlock) == 0 /* Test locking (writer). */
+ && pthread_rwlock_unlock (rwlock) == 0
+ && pthread_rwlock_destroy (rwlock) == 0)
+ result = PASS;
+
+ return result;
+}
new file mode 100644
@@ -0,0 +1,59 @@
+# Common tests for the RWLockPrinter class.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+import sys
+
+from test_common import *
+
+test_source = sys.argv[1]
+test_bin = sys.argv[2]
+result = PASS
+
+try:
+ init_test(test_bin)
+ go_to_main()
+
+ var = 'rwlock'
+ to_string = 'pthread_rwlock_t'
+
+ break_at(test_source, 'Test locking (reader)')
+ continue_cmd() # Go to test_locking_reader
+ test_printer(var, to_string, {'Status': 'Unlocked'})
+ next_cmd()
+ test_printer(var, to_string, {'Status': r'Locked \(Read\)', 'Readers': '1'})
+ next_cmd()
+ test_printer(var, to_string, {'Readers': '2'})
+ next_cmd()
+ test_printer(var, to_string, {'Readers': '3'})
+
+ break_at(test_source, 'Test locking (writer)')
+ continue_cmd() # Go to test_locking_writer
+ test_printer(var, to_string, {'Status': 'Unlocked'})
+ next_cmd()
+ thread_id = get_current_thread_lwpid()
+ test_printer(var, to_string, {'Status': r'Locked \(Write\)',
+ 'Writer ID': thread_id})
+
+ continue_cmd() # Exit
+
+except (NoLineError, pexpect.TIMEOUT) as exception:
+ print('Error: {0}'.format(exception))
+ result = FAIL
+
+exit(result)
new file mode 100644
@@ -0,0 +1,315 @@
+# Common functions and variables for testing the Python pretty printers.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+"""These tests require PExpect.
+
+Attributes:
+ PASS, FAIL, UNSUPPORTED (int): Test exit codes, as per evaluate-test.sh.
+ GDB (string): A string with the name of the gdb binary.
+ gdb (pexpect.spawn): The gdb process, as handled by PExpect.
+ gdb_prompt (raw string): A pattern for matching the gdb prompt.
+"""
+
+import os
+import re
+
+PASS = 0
+FAIL = 1
+UNSUPPORTED = 77
+GDB = 'gdb'
+
+try:
+ import pexpect
+except ImportError:
+ print('PExpect must be installed in order to test the pretty printers.')
+ exit(UNSUPPORTED)
+
+if not pexpect.which(GDB):
+ print('gdb must be installed in order to test the pretty printers.')
+ exit(UNSUPPORTED)
+
+class NoLineError(Exception):
+ """Custom exception which indicates that a test file doesn't contain
+ the requested string.
+ """
+
+ def __init__(self, file_name, string):
+ """Constructor.
+
+ Args:
+ file_name (string): The name of the test file.
+ string (string): The string that was requested.
+ """
+
+ super(NoLineError, self).__init__()
+ self.file_name = file_name
+ self.string = string
+
+ def __str__(self):
+ """Shows a readable representation of the exception."""
+
+ return ('File {0} has no line containing the following string: {1}'
+ .format(self.file_name, self.string))
+
+timeout = 1
+TIMEOUTFACTOR = os.environ.get('TIMEOUTFACTOR')
+
+if TIMEOUTFACTOR:
+ timeout = int(TIMEOUTFACTOR)
+
+gdb = pexpect.spawn(GDB, echo=False, timeout=timeout)
+
+# Set the gdb prompt to a custom one, so that user-defined prompts won't
+# interfere. We assume the user won't have his prompt set to this.
+gdb_prompt = r'gdb-test% '
+gdb.sendline('set prompt {0}'.format(gdb_prompt))
+gdb.expect(gdb_prompt)
+
+def test(command, pattern):
+ """Sends 'command' to gdb and expects the given 'pattern'.
+
+ If 'pattern' is None, simply consumes everything up to and including
+ the gdb prompt.
+
+ Args:
+ command (string): The command we'll send to gdb.
+ pattern (raw string): A pattern the gdb output should match.
+
+ Returns:
+ string: The string that matched 'pattern', or an empty string if
+ 'pattern' was None.
+ """
+
+ match = ''
+
+ gdb.sendline(command)
+
+ if pattern:
+ # PExpect does a non-greedy match for '+' and '*'. Since it can't look
+ # ahead on the gdb output stream, if 'pattern' ends with a '+' or a '*'
+ # we may end up matching only part of the required output.
+ # To avoid this, we'll consume 'pattern' and anything that follows it
+ # up to and including the gdb prompt, then extract 'pattern' later.
+ index = gdb.expect([r'{0}.+{1}'.format(pattern, gdb_prompt),
+ pexpect.TIMEOUT])
+
+ if index == 0:
+ # gdb.after now contains the whole match. Extract the text that
+ # matches 'pattern'.
+ match = re.match(pattern, gdb.after, re.DOTALL).group()
+ elif index == 1:
+ # We got a timeout exception. Print information on what caused it
+ # and bail out.
+ error = ('Response does not match the expected pattern.\n'
+ 'Command: {0}\n'
+ 'Expected pattern: {1}\n'
+ 'Response: {2}'.format(command, pattern, gdb.before))
+
+ raise pexpect.TIMEOUT(error)
+ else:
+ # Consume just the the gdb prompt.
+ gdb.expect(gdb_prompt)
+
+ return match
+
+def init_test(test_bin):
+ """Loads the test binary file to gdb.
+
+ Args:
+ test_bin (string): The name of the test binary file.
+ """
+
+ test('file {0}'.format(test_bin), None)
+
+def go_to_main():
+ """Executes a gdb 'start' command, which takes us to main."""
+
+ test('start', r'main')
+
+def get_line_number(file_name, string):
+ """Returns the number of the line in which 'string' appears within a file.
+
+ Args:
+ file_name (string): The name of the file we'll search through.
+ string (string): The string we'll look for.
+
+ Returns:
+ int: The number of the line in which 'string' appears, starting from 1.
+ """
+ number = -1
+
+ with open(file_name) as src_file:
+ for i, line in enumerate(src_file):
+ if string in line:
+ number = i + 1
+ break
+
+ if number == -1:
+ raise NoLineError(file_name, string)
+
+ return number
+
+def break_at(file_name, string, temporary=True, thread=None):
+ """Places a breakpoint on the first line in 'file_name' containing 'string'.
+
+ 'string' is usually a comment like "Stop here". Notice this may fail unless
+ the comment is placed inline next to actual code, e.g.:
+
+ ...
+ /* Stop here */
+ ...
+
+ may fail, while:
+
+ ...
+ some_func(); /* Stop here */
+ ...
+
+ will succeed.
+
+ If 'thread' isn't None, the breakpoint will be set for all the threads.
+ Otherwise, it'll be set only for 'thread'.
+
+ Args:
+ file_name (string): The name of the file we'll place the breakpoint in.
+ string (string): A string we'll look for inside the file.
+ We'll place a breakpoint on the line which contains it.
+ temporary (bool): Whether the breakpoint should be automatically deleted
+ after we reach it.
+ thread (int): The number of the thread we'll place the breakpoint for,
+ as seen by gdb. If specified, it should be greater than zero.
+ """
+
+ if not thread:
+ thread_str = ''
+ else:
+ thread_str = 'thread {0}'.format(thread)
+
+ if temporary:
+ command = 'tbreak'
+ break_type = 'Temporary breakpoint'
+ else:
+ command = 'break'
+ break_type = 'Breakpoint'
+
+ line_number = str(get_line_number(file_name, string))
+
+ test('{0} {1}:{2} {3}'.format(command, file_name, line_number, thread_str),
+ r'{0} [0-9]+ at 0x[a-f0-9]+: file {1}, line {2}\.'.format(break_type,
+ file_name,
+ line_number))
+
+def continue_cmd(thread=None):
+ """Executes a gdb 'continue' command.
+
+ If 'thread' isn't None, the command will be applied to all the threads.
+ Otherwise, it'll be applied only to 'thread'.
+
+ Args:
+ thread (int): The number of the thread we'll apply the command to,
+ as seen by gdb. If specified, it should be greater than zero.
+ """
+
+ if not thread:
+ command = 'continue'
+ else:
+ command = 'thread apply {0} continue'.format(thread)
+
+ test(command, None)
+
+def next_cmd(count=1, thread=None):
+ """Executes a gdb 'next' command.
+
+ If 'thread' isn't None, the command will be applied to all the threads.
+ Otherwise, it'll be applied only to 'thread'.
+
+ Args:
+ count (int): The 'count' argument of the 'next' command.
+ thread (int): The number of the thread we'll apply the command to,
+ as seen by gdb. If specified, it should be greater than zero.
+ """
+
+ if not thread:
+ command = 'next'
+ else:
+ command = 'thread apply {0} next'
+
+ test('{0} {1}'.format(command, count), None)
+
+def select_thread(thread):
+ """Selects the thread indicated by 'thread'.
+
+ Args:
+ thread (int): The number of the thread we'll switch to, as seen by gdb.
+ This should be greater than zero.
+ """
+
+ if thread > 0:
+ test('thread {0}'.format(thread), None)
+
+def get_current_thread_lwpid():
+ """Gets the current thread's Lightweight Process ID.
+
+ Returns:
+ string: The current thread's LWP ID.
+ """
+
+ # It's easier to get the LWP ID through the Python API than the gdb CLI.
+ command = 'python print(gdb.selected_thread().ptid[1])'
+
+ return test(command, r'[0-9]+')
+
+def set_scheduler_locking(mode):
+ """Executes the gdb 'set scheduler-locking' command.
+
+ Args:
+ mode (bool): Whether the scheduler locking mode should be 'on'.
+ """
+ modes = {
+ True: 'on',
+ False: 'off'
+ }
+
+ test('set scheduler-locking {0}'.format(modes[mode]), None)
+
+def test_printer(var, to_string, children=None, is_ptr=True):
+ """ Tests the output of a pretty printer.
+
+ For a variable called 'var', this tests whether its associated printer
+ outputs the expected 'to_string' and children (if any).
+
+ Args:
+ var (string): The name of the variable we'll print.
+ to_string (raw string): The expected output of the printer's 'to_string'
+ method.
+ children (map {raw string->raw string}): A map with the expected output
+ of the printer's children' method.
+ is_ptr (bool): Whether 'var' is a pointer, and thus should be
+ dereferenced.
+ """
+
+ if is_ptr:
+ var = '*{0}'.format(var)
+
+ test('print {0}'.format(var), to_string)
+
+ if children:
+ for name, value in children.items():
+ # Children are shown as 'name = value'.
+ test('print {0}'.format(var), r'{0} = {1}'.format(name, value))
new file mode 100644
@@ -0,0 +1,118 @@
+# Script to generate constants for Python pretty printers.
+#
+# Copyright (C) 2016 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+#
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with the GNU C Library; if not, see
+# <http://www.gnu.org/licenses/>.
+
+# This script is a smaller version of the clever gen-asm-const.awk hack used to
+# generate ASM constants from .sym files. We'll use this to generate constants
+# for Python pretty printers.
+#
+# The input to this script are .pysym files that look like:
+# #C_Preprocessor_Directive...
+# NAME1
+# NAME2 expression...
+#
+# A line giving just a name implies an expression consisting of just that name.
+# Comments start with '--'.
+#
+# The output of this script is a 'dummy' function containing 'asm' declarations
+# for each non-preprocessor line in the .pysym file. The expression values
+# will appear as input operands to the 'asm' declaration. For example, if we
+# have:
+#
+# /* header.h */
+# #define MACRO 42
+#
+# struct S {
+# char c1;
+# char c2;
+# char c3;
+# };
+#
+# enum E {
+# ZERO,
+# ONE
+# };
+#
+# /* symbols.pysym */
+# #include <stddef.h>
+# #include "header.h"
+# -- This is a comment
+# MACRO
+# C3_OFFSET offsetof(struct S, c3)
+# E_ONE ONE
+#
+# the output will be:
+#
+# #include <stddef.h>
+# #include "header.h"
+# void dummy(void)
+# {
+# asm ("@name@MACRO@value@%0@" : : "i" (MACRO));
+# asm ("@name@C3_OFFSET@value@%0@" : : "i" (offsetof(struct S, c3)));
+# asm ("@name@E_ONE@value@%0@" : : "i" (ONE));
+# }
+#
+# We'll later feed this output to gcc -S. Since '-S' tells gcc to compile but
+# not assemble, gcc will output something like:
+#
+# dummy:
+# ...
+# @name@MACRO@value@$42@
+# @name@C3_OFFSET@value@$2@
+# @name@E_ONE@value@$1@
+#
+# Finally, we can process that output to extract the constant values.
+# Notice gcc may prepend a special character such as '$' to each value.
+
+# found_symbol indicates whether we found a non-comment, non-preprocessor line.
+BEGIN { found_symbol = 0 }
+
+# C preprocessor directives go straight through.
+/^#/ { print; next; }
+
+# Skip comments.
+/--/ { next; }
+
+# Trim leading whitespace.
+{ sub(/^[[:blank:]]*/, ""); }
+
+# If we found a non-comment, non-preprocessor line, print the 'dummy' function
+# header.
+NF > 0 && !found_symbol {
+ print "void dummy(void)\n{";
+ found_symbol = 1;
+}
+
+# If the line contains just a name, duplicate it so we can use that name
+# as the value of the expression.
+NF == 1 { sub(/^.*$/, "& &"); }
+
+# If a line contains a name and an expression...
+NF > 1 {
+ name = $1;
+
+ # Remove any characters before the second field.
+ sub(/^[^[:blank:]]+[[:blank:]]+/, "");
+
+ # '$0' ends up being everything that appeared after the first field
+ # separator.
+ printf " asm (\"@name@%s@value@%0@\" : : \"i\" (%s));\n", name, $0;
+}
+
+# Close the 'dummy' function.
+END { if (found_symbol) print "}"; }