[1/5] x86_64: Add support for bcmp using sse2, sse4_1, avx2, and evex
Checks
| Context |
Check |
Description |
| dj/TryBot-apply_patch |
success
|
Patch applied to master at the time it was sent
|
Commit Message
No bug. This commit adds support for an optimized bcmp implementation.
Support is for sse2, sse4_1, avx2, and evex.
All string tests passing and build succeeding.
---
This commit is essentially because compilers will optimize the
idiomatic use of memcmp return as a boolean:
https://godbolt.org/z/Tbhefh6cv
so it seems reasonable to have an optimized bcmp implementation as we
can get ~0-25% improvement (generally larger improvement for the
smaller size ranges which ultimately are the most important to opimize
for).
Numbers for new implementations attached in reply.
Tests where run on the following CPUs:
Tigerlake: https://ark.intel.com/content/www/us/en/ark/products/208921/intel-core-i7-1165g7-processor-12m-cache-up-to-4-70-ghz-with-ipu.html
Skylake: https://ark.intel.com/content/www/us/en/ark/products/149091/intel-core-i7-8565u-processor-8m-cache-up-to-4-60-ghz.html
Some notes on the numbers.
There are some regressions in the sse2/sse4_1 versions. I didn't
optimize these versions beyond defining out obviously irrelivant code
for bcmp. My intuition is that the slowdowns are alignment related. I
am not sure if these issues would translate to architectures that
would actually use sse2/sse4_1.
I add the sse2/sse4_1 implementations mostly so that the ifunc would
have something to fallback on. With the lackluster numbers it may not
be worth it, especially factoring in code size costs. Thoughts?
The Tigerlake and Skylake versions are basically universal
improvements for evex and avx2. I opted to align bcmp to 64 byte as
opposed to 16. The rational is that to optimize for frontend behavior
on either machine, only 16 byte gurantees is not enough. I think in
any function where throughput (which I think bcmp can be) might be
important good frontend behavior is important.
benchtests/Makefile | 2 +-
benchtests/bench-bcmp.c | 20 ++++++++
benchtests/bench-memcmp.c | 4 +-
string/Makefile | 4 +-
string/test-bcmp.c | 21 +++++++++
string/test-memcmp.c | 27 +++++++----
sysdeps/x86_64/memcmp.S | 2 -
sysdeps/x86_64/multiarch/Makefile | 3 ++
sysdeps/x86_64/multiarch/bcmp-avx2-rtm.S | 12 +++++
sysdeps/x86_64/multiarch/bcmp-avx2.S | 23 ++++++++++
sysdeps/x86_64/multiarch/bcmp-evex.S | 23 ++++++++++
sysdeps/x86_64/multiarch/bcmp-sse2.S | 23 ++++++++++
sysdeps/x86_64/multiarch/bcmp-sse4.S | 23 ++++++++++
sysdeps/x86_64/multiarch/bcmp.c | 35 ++++++++++++++
sysdeps/x86_64/multiarch/ifunc-bcmp.h | 53 ++++++++++++++++++++++
sysdeps/x86_64/multiarch/ifunc-impl-list.c | 23 ++++++++++
sysdeps/x86_64/multiarch/memcmp-sse2.S | 4 +-
sysdeps/x86_64/multiarch/memcmp.c | 2 -
18 files changed, 286 insertions(+), 18 deletions(-)
create mode 100644 benchtests/bench-bcmp.c
create mode 100644 string/test-bcmp.c
create mode 100644 sysdeps/x86_64/multiarch/bcmp-avx2-rtm.S
create mode 100644 sysdeps/x86_64/multiarch/bcmp-avx2.S
create mode 100644 sysdeps/x86_64/multiarch/bcmp-evex.S
create mode 100644 sysdeps/x86_64/multiarch/bcmp-sse2.S
create mode 100644 sysdeps/x86_64/multiarch/bcmp-sse4.S
create mode 100644 sysdeps/x86_64/multiarch/bcmp.c
create mode 100644 sysdeps/x86_64/multiarch/ifunc-bcmp.h
Comments
On Mon, Sep 13, 2021 at 6:21 PM Noah Goldstein <goldstein.w.n@gmail.com>
wrote:
> No bug. This commit adds support for an optimized bcmp implementation.
> Support is for sse2, sse4_1, avx2, and evex.
>
> All string tests passing and build succeeding.
> ---
> This commit is essentially because compilers will optimize the
> idiomatic use of memcmp return as a boolean:
>
> https://godbolt.org/z/Tbhefh6cv
>
> so it seems reasonable to have an optimized bcmp implementation as we
> can get ~0-25% improvement (generally larger improvement for the
> smaller size ranges which ultimately are the most important to opimize
> for).
>
> Numbers for new implementations attached in reply.
>
Numbers in this email.
>
> Tests where run on the following CPUs:
>
> Tigerlake:
> https://ark.intel.com/content/www/us/en/ark/products/208921/intel-core-i7-1165g7-processor-12m-cache-up-to-4-70-ghz-with-ipu.html
> Skylake:
> https://ark.intel.com/content/www/us/en/ark/products/149091/intel-core-i7-8565u-processor-8m-cache-up-to-4-60-ghz.html
>
> Some notes on the numbers.
>
> There are some regressions in the sse2/sse4_1 versions. I didn't
> optimize these versions beyond defining out obviously irrelivant code
> for bcmp. My intuition is that the slowdowns are alignment related. I
> am not sure if these issues would translate to architectures that
> would actually use sse2/sse4_1.
>
> I add the sse2/sse4_1 implementations mostly so that the ifunc would
> have something to fallback on. With the lackluster numbers it may not
> be worth it, especially factoring in code size costs. Thoughts?
>
> The Tigerlake and Skylake versions are basically universal
> improvements for evex and avx2. I opted to align bcmp to 64 byte as
> opposed to 16. The rational is that to optimize for frontend behavior
> on either machine, only 16 byte gurantees is not enough. I think in
> any function where throughput (which I think bcmp can be) might be
> important good frontend behavior is important.
>
>
> benchtests/Makefile | 2 +-
> benchtests/bench-bcmp.c | 20 ++++++++
> benchtests/bench-memcmp.c | 4 +-
> string/Makefile | 4 +-
> string/test-bcmp.c | 21 +++++++++
> string/test-memcmp.c | 27 +++++++----
> sysdeps/x86_64/memcmp.S | 2 -
> sysdeps/x86_64/multiarch/Makefile | 3 ++
> sysdeps/x86_64/multiarch/bcmp-avx2-rtm.S | 12 +++++
> sysdeps/x86_64/multiarch/bcmp-avx2.S | 23 ++++++++++
> sysdeps/x86_64/multiarch/bcmp-evex.S | 23 ++++++++++
> sysdeps/x86_64/multiarch/bcmp-sse2.S | 23 ++++++++++
> sysdeps/x86_64/multiarch/bcmp-sse4.S | 23 ++++++++++
> sysdeps/x86_64/multiarch/bcmp.c | 35 ++++++++++++++
> sysdeps/x86_64/multiarch/ifunc-bcmp.h | 53 ++++++++++++++++++++++
> sysdeps/x86_64/multiarch/ifunc-impl-list.c | 23 ++++++++++
> sysdeps/x86_64/multiarch/memcmp-sse2.S | 4 +-
> sysdeps/x86_64/multiarch/memcmp.c | 2 -
> 18 files changed, 286 insertions(+), 18 deletions(-)
> create mode 100644 benchtests/bench-bcmp.c
> create mode 100644 string/test-bcmp.c
> create mode 100644 sysdeps/x86_64/multiarch/bcmp-avx2-rtm.S
> create mode 100644 sysdeps/x86_64/multiarch/bcmp-avx2.S
> create mode 100644 sysdeps/x86_64/multiarch/bcmp-evex.S
> create mode 100644 sysdeps/x86_64/multiarch/bcmp-sse2.S
> create mode 100644 sysdeps/x86_64/multiarch/bcmp-sse4.S
> create mode 100644 sysdeps/x86_64/multiarch/bcmp.c
> create mode 100644 sysdeps/x86_64/multiarch/ifunc-bcmp.h
>
> diff --git a/benchtests/Makefile b/benchtests/Makefile
> index 1530939a8c..5fc495eb57 100644
> --- a/benchtests/Makefile
> +++ b/benchtests/Makefile
> @@ -47,7 +47,7 @@ bench := $(foreach B,$(filter bench-%,${BENCHSET}),
> ${${B}})
> endif
>
> # String function benchmarks.
> -string-benchset := memccpy memchr memcmp memcpy memmem memmove \
> +string-benchset := bcmp memccpy memchr memcmp memcpy memmem memmove \
> mempcpy memset rawmemchr stpcpy stpncpy strcasecmp
> strcasestr \
> strcat strchr strchrnul strcmp strcpy strcspn strlen \
> strncasecmp strncat strncmp strncpy strnlen strpbrk
> strrchr \
> diff --git a/benchtests/bench-bcmp.c b/benchtests/bench-bcmp.c
> new file mode 100644
> index 0000000000..1023639787
> --- /dev/null
> +++ b/benchtests/bench-bcmp.c
> @@ -0,0 +1,20 @@
> +/* Measure bcmp functions.
> + Copyright (C) 2015-2021 Free Software Foundation, Inc.
> + This file is part of the GNU C Library.
> +
> + The GNU C Library is free software; you can redistribute it and/or
> + modify it under the terms of the GNU Lesser General Public
> + License as published by the Free Software Foundation; either
> + version 2.1 of the License, or (at your option) any later version.
> +
> + The GNU C Library is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + Lesser General Public License for more details.
> +
> + You should have received a copy of the GNU Lesser General Public
> + License along with the GNU C Library; if not, see
> + <https://www.gnu.org/licenses/>. */
> +
> +#define TEST_BCMP 1
> +#include "bench-memcmp.c"
> diff --git a/benchtests/bench-memcmp.c b/benchtests/bench-memcmp.c
> index 744c7ec5ba..4d5f8fb766 100644
> --- a/benchtests/bench-memcmp.c
> +++ b/benchtests/bench-memcmp.c
> @@ -17,7 +17,9 @@
> <https://www.gnu.org/licenses/>. */
>
> #define TEST_MAIN
> -#ifdef WIDE
> +#ifdef TEST_BCMP
> +# define TEST_NAME "bcmp"
> +#elif defined WIDE
> # define TEST_NAME "wmemcmp"
> #else
> # define TEST_NAME "memcmp"
> diff --git a/string/Makefile b/string/Makefile
> index f0fce2a0b8..f1f67ee157 100644
> --- a/string/Makefile
> +++ b/string/Makefile
> @@ -35,7 +35,7 @@ routines := strcat strchr strcmp strcoll strcpy
> strcspn \
> strncat strncmp strncpy \
> strrchr strpbrk strsignal strspn strstr strtok \
> strtok_r strxfrm memchr memcmp memmove memset \
> - mempcpy bcopy bzero ffs ffsll stpcpy stpncpy \
> + mempcpy bcmp bcopy bzero ffs ffsll stpcpy stpncpy
> \
> strcasecmp strncase strcasecmp_l strncase_l \
> memccpy memcpy wordcopy strsep strcasestr \
> swab strfry memfrob memmem rawmemchr strchrnul \
> @@ -52,7 +52,7 @@ strop-tests := memchr memcmp memcpy memmove mempcpy
> memset memccpy \
> stpcpy stpncpy strcat strchr strcmp strcpy strcspn \
> strlen strncmp strncpy strpbrk strrchr strspn memmem \
> strstr strcasestr strnlen strcasecmp strncasecmp \
> - strncat rawmemchr strchrnul bcopy bzero memrchr \
> + strncat rawmemchr strchrnul bcmp bcopy bzero memrchr \
> explicit_bzero
> tests := tester inl-tester noinl-tester testcopy test-ffs \
> tst-strlen stratcliff tst-svc tst-inlcall \
> diff --git a/string/test-bcmp.c b/string/test-bcmp.c
> new file mode 100644
> index 0000000000..6d19a4a87c
> --- /dev/null
> +++ b/string/test-bcmp.c
> @@ -0,0 +1,21 @@
> +/* Test and measure bcmp functions.
> + Copyright (C) 2012-2021 Free Software Foundation, Inc.
> + This file is part of the GNU C Library.
> +
> + The GNU C Library is free software; you can redistribute it and/or
> + modify it under the terms of the GNU Lesser General Public
> + License as published by the Free Software Foundation; either
> + version 2.1 of the License, or (at your option) any later version.
> +
> + The GNU C Library is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + Lesser General Public License for more details.
> +
> + You should have received a copy of the GNU Lesser General Public
> + License along with the GNU C Library; if not, see
> + <https://www.gnu.org/licenses/>. */
> +
> +#define BAD_RESULT(result, expec) ((!(result)) != (!(expec)))
> +#define TEST_BCMP 1
> +#include "test-memcmp.c"
> diff --git a/string/test-memcmp.c b/string/test-memcmp.c
> index 6ddbc05d2f..c630e6799d 100644
> --- a/string/test-memcmp.c
> +++ b/string/test-memcmp.c
> @@ -17,11 +17,14 @@
> <https://www.gnu.org/licenses/>. */
>
> #define TEST_MAIN
> -#ifdef WIDE
> +#ifdef TEST_BCMP
> +# define TEST_NAME "bcmp"
> +#elif defined WIDE
> # define TEST_NAME "wmemcmp"
> #else
> # define TEST_NAME "memcmp"
> #endif
> +
> #include "test-string.h"
> #ifdef WIDE
> # include <inttypes.h>
> @@ -35,6 +38,7 @@
> # define CHARBYTES 4
> # define CHAR__MIN WCHAR_MIN
> # define CHAR__MAX WCHAR_MAX
> +
> int
> simple_wmemcmp (const wchar_t *s1, const wchar_t *s2, size_t n)
> {
> @@ -48,8 +52,11 @@ simple_wmemcmp (const wchar_t *s1, const wchar_t *s2,
> size_t n)
> }
> #else
> # include <limits.h>
> -
> -# define MEMCMP memcmp
> +# ifdef TEST_BCMP
> +# define MEMCMP bcmp
> +# else
> +# define MEMCMP memcmp
> +# endif
> # define MEMCPY memcpy
> # define SIMPLE_MEMCMP simple_memcmp
> # define CHAR char
> @@ -69,6 +76,12 @@ simple_memcmp (const char *s1, const char *s2, size_t n)
> }
> #endif
>
> +# ifndef BAD_RESULT
> +# define BAD_RESULT(result, expec) \
> + (((result) == 0 && (expec)) || ((result) < 0 && (expec) >= 0) || \
> + ((result) > 0 && (expec) <= 0))
> +# endif
> +
> typedef int (*proto_t) (const CHAR *, const CHAR *, size_t);
>
> IMPL (SIMPLE_MEMCMP, 0)
> @@ -79,9 +92,7 @@ check_result (impl_t *impl, const CHAR *s1, const CHAR
> *s2, size_t len,
> int exp_result)
> {
> int result = CALL (impl, s1, s2, len);
> - if ((exp_result == 0 && result != 0)
> - || (exp_result < 0 && result >= 0)
> - || (exp_result > 0 && result <= 0))
> + if (BAD_RESULT(result, exp_result))
> {
> error (0, 0, "Wrong result in function %s %d %d", impl->name,
> result, exp_result);
> @@ -186,9 +197,7 @@ do_random_tests (void)
> {
> r = CALL (impl, (CHAR *) p1 + align1, (const CHAR *) p2 + align2,
> len);
> - if ((r == 0 && result)
> - || (r < 0 && result >= 0)
> - || (r > 0 && result <= 0))
> + if (BAD_RESULT(r, result))
> {
> error (0, 0, "Iteration %zd - wrong result in function %s
> (%zd, %zd, %zd, %zd) %ld != %d, p1 %p p2 %p",
> n, impl->name, align1 * CHARBYTES & 63, align2 *
> CHARBYTES & 63, len, pos, r, result, p1, p2);
> diff --git a/sysdeps/x86_64/memcmp.S b/sysdeps/x86_64/memcmp.S
> index 870e15c5a0..dfd0269db2 100644
> --- a/sysdeps/x86_64/memcmp.S
> +++ b/sysdeps/x86_64/memcmp.S
> @@ -356,6 +356,4 @@ L(ATR32res):
> .p2align 4,, 4
> END(memcmp)
>
> -#undef bcmp
> -weak_alias (memcmp, bcmp)
> libc_hidden_builtin_def (memcmp)
> diff --git a/sysdeps/x86_64/multiarch/Makefile
> b/sysdeps/x86_64/multiarch/Makefile
> index 26be40959c..9dd0d8c3ff 100644
> --- a/sysdeps/x86_64/multiarch/Makefile
> +++ b/sysdeps/x86_64/multiarch/Makefile
> @@ -1,6 +1,7 @@
> ifeq ($(subdir),string)
>
> sysdep_routines += strncat-c stpncpy-c strncpy-c \
> + bcmp-sse2 bcmp-sse4 bcmp-avx2 \
> strcmp-sse2 strcmp-sse2-unaligned strcmp-ssse3 \
> strcmp-sse4_2 strcmp-avx2 \
> strncmp-sse2 strncmp-ssse3 strncmp-sse4_2 strncmp-avx2 \
> @@ -40,6 +41,7 @@ sysdep_routines += strncat-c stpncpy-c strncpy-c \
> memset-sse2-unaligned-erms \
> memset-avx2-unaligned-erms \
> memset-avx512-unaligned-erms \
> + bcmp-avx2-rtm \
> memchr-avx2-rtm \
> memcmp-avx2-movbe-rtm \
> memmove-avx-unaligned-erms-rtm \
> @@ -59,6 +61,7 @@ sysdep_routines += strncat-c stpncpy-c strncpy-c \
> strncpy-avx2-rtm \
> strnlen-avx2-rtm \
> strrchr-avx2-rtm \
> + bcmp-evex \
> memchr-evex \
> memcmp-evex-movbe \
> memmove-evex-unaligned-erms \
> diff --git a/sysdeps/x86_64/multiarch/bcmp-avx2-rtm.S
> b/sysdeps/x86_64/multiarch/bcmp-avx2-rtm.S
> new file mode 100644
> index 0000000000..d742257e4e
> --- /dev/null
> +++ b/sysdeps/x86_64/multiarch/bcmp-avx2-rtm.S
> @@ -0,0 +1,12 @@
> +#ifndef MEMCMP
> +# define MEMCMP __bcmp_avx2_rtm
> +#endif
> +
> +#define ZERO_UPPER_VEC_REGISTERS_RETURN \
> + ZERO_UPPER_VEC_REGISTERS_RETURN_XTEST
> +
> +#define VZEROUPPER_RETURN jmp L(return_vzeroupper)
> +
> +#define SECTION(p) p##.avx.rtm
> +
> +#include "bcmp-avx2.S"
> diff --git a/sysdeps/x86_64/multiarch/bcmp-avx2.S
> b/sysdeps/x86_64/multiarch/bcmp-avx2.S
> new file mode 100644
> index 0000000000..93a9a20b17
> --- /dev/null
> +++ b/sysdeps/x86_64/multiarch/bcmp-avx2.S
> @@ -0,0 +1,23 @@
> +/* bcmp optimized with AVX2.
> + Copyright (C) 2017-2021 Free Software Foundation, Inc.
> + This file is part of the GNU C Library.
> +
> + The GNU C Library is free software; you can redistribute it and/or
> + modify it under the terms of the GNU Lesser General Public
> + License as published by the Free Software Foundation; either
> + version 2.1 of the License, or (at your option) any later version.
> +
> + The GNU C Library is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + Lesser General Public License for more details.
> +
> + You should have received a copy of the GNU Lesser General Public
> + License along with the GNU C Library; if not, see
> + <https://www.gnu.org/licenses/>. */
> +
> +#ifndef MEMCMP
> +# define MEMCMP __bcmp_avx2
> +#endif
> +
> +#include "bcmp-avx2.S"
> diff --git a/sysdeps/x86_64/multiarch/bcmp-evex.S
> b/sysdeps/x86_64/multiarch/bcmp-evex.S
> new file mode 100644
> index 0000000000..ade52e8c68
> --- /dev/null
> +++ b/sysdeps/x86_64/multiarch/bcmp-evex.S
> @@ -0,0 +1,23 @@
> +/* bcmp optimized with EVEX.
> + Copyright (C) 2017-2021 Free Software Foundation, Inc.
> + This file is part of the GNU C Library.
> +
> + The GNU C Library is free software; you can redistribute it and/or
> + modify it under the terms of the GNU Lesser General Public
> + License as published by the Free Software Foundation; either
> + version 2.1 of the License, or (at your option) any later version.
> +
> + The GNU C Library is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + Lesser General Public License for more details.
> +
> + You should have received a copy of the GNU Lesser General Public
> + License along with the GNU C Library; if not, see
> + <https://www.gnu.org/licenses/>. */
> +
> +#ifndef MEMCMP
> +# define MEMCMP __bcmp_evex
> +#endif
> +
> +#include "memcmp-evex-movbe.S"
> diff --git a/sysdeps/x86_64/multiarch/bcmp-sse2.S
> b/sysdeps/x86_64/multiarch/bcmp-sse2.S
> new file mode 100644
> index 0000000000..b18d570386
> --- /dev/null
> +++ b/sysdeps/x86_64/multiarch/bcmp-sse2.S
> @@ -0,0 +1,23 @@
> +/* bcmp optimized with SSE2
> + Copyright (C) 2017-2021 Free Software Foundation, Inc.
> + This file is part of the GNU C Library.
> +
> + The GNU C Library is free software; you can redistribute it and/or
> + modify it under the terms of the GNU Lesser General Public
> + License as published by the Free Software Foundation; either
> + version 2.1 of the License, or (at your option) any later version.
> +
> + The GNU C Library is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + Lesser General Public License for more details.
> +
> + You should have received a copy of the GNU Lesser General Public
> + License along with the GNU C Library; if not, see
> + <https://www.gnu.org/licenses/>. */
> +
> +# ifndef memcmp
> +# define memcmp __bcmp_sse2
> +# endif
> +# define USE_AS_BCMP 1
> +#include "memcmp-sse2.S"
> diff --git a/sysdeps/x86_64/multiarch/bcmp-sse4.S
> b/sysdeps/x86_64/multiarch/bcmp-sse4.S
> new file mode 100644
> index 0000000000..ed9804053f
> --- /dev/null
> +++ b/sysdeps/x86_64/multiarch/bcmp-sse4.S
> @@ -0,0 +1,23 @@
> +/* bcmp optimized with SSE4.1
> + Copyright (C) 2017-2021 Free Software Foundation, Inc.
> + This file is part of the GNU C Library.
> +
> + The GNU C Library is free software; you can redistribute it and/or
> + modify it under the terms of the GNU Lesser General Public
> + License as published by the Free Software Foundation; either
> + version 2.1 of the License, or (at your option) any later version.
> +
> + The GNU C Library is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + Lesser General Public License for more details.
> +
> + You should have received a copy of the GNU Lesser General Public
> + License along with the GNU C Library; if not, see
> + <https://www.gnu.org/licenses/>. */
> +
> +# ifndef MEMCMP
> +# define MEMCMP __bcmp_sse4_1
> +# endif
> +# define USE_AS_BCMP 1
> +#include "memcmp-sse4.S"
> diff --git a/sysdeps/x86_64/multiarch/bcmp.c
> b/sysdeps/x86_64/multiarch/bcmp.c
> new file mode 100644
> index 0000000000..6e26b73ecc
> --- /dev/null
> +++ b/sysdeps/x86_64/multiarch/bcmp.c
> @@ -0,0 +1,35 @@
> +/* Multiple versions of bcmp.
> + All versions must be listed in ifunc-impl-list.c.
> + Copyright (C) 2017-2021 Free Software Foundation, Inc.
> + This file is part of the GNU C Library.
> +
> + The GNU C Library is free software; you can redistribute it and/or
> + modify it under the terms of the GNU Lesser General Public
> + License as published by the Free Software Foundation; either
> + version 2.1 of the License, or (at your option) any later version.
> +
> + The GNU C Library is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + Lesser General Public License for more details.
> +
> + You should have received a copy of the GNU Lesser General Public
> + License along with the GNU C Library; if not, see
> + <https://www.gnu.org/licenses/>. */
> +
> +/* Define multiple versions only for the definition in libc. */
> +#if IS_IN (libc)
> +# define bcmp __redirect_bcmp
> +# include <string.h>
> +# undef bcmp
> +
> +# define SYMBOL_NAME bcmp
> +# include "ifunc-bcmp.h"
> +
> +libc_ifunc_redirected (__redirect_bcmp, bcmp, IFUNC_SELECTOR ());
> +
> +# ifdef SHARED
> +__hidden_ver1 (bcmp, __GI_bcmp, __redirect_bcmp)
> + __attribute__ ((visibility ("hidden"))) __attribute_copy__ (bcmp);
> +# endif
> +#endif
> diff --git a/sysdeps/x86_64/multiarch/ifunc-bcmp.h
> b/sysdeps/x86_64/multiarch/ifunc-bcmp.h
> new file mode 100644
> index 0000000000..b0dacd8526
> --- /dev/null
> +++ b/sysdeps/x86_64/multiarch/ifunc-bcmp.h
> @@ -0,0 +1,53 @@
> +/* Common definition for bcmp ifunc selections.
> + All versions must be listed in ifunc-impl-list.c.
> + Copyright (C) 2017-2021 Free Software Foundation, Inc.
> + This file is part of the GNU C Library.
> +
> + The GNU C Library is free software; you can redistribute it and/or
> + modify it under the terms of the GNU Lesser General Public
> + License as published by the Free Software Foundation; either
> + version 2.1 of the License, or (at your option) any later version.
> +
> + The GNU C Library is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + Lesser General Public License for more details.
> +
> + You should have received a copy of the GNU Lesser General Public
> + License along with the GNU C Library; if not, see
> + <https://www.gnu.org/licenses/>. */
> +
> +# include <init-arch.h>
> +
> +extern __typeof (REDIRECT_NAME) OPTIMIZE (sse2) attribute_hidden;
> +extern __typeof (REDIRECT_NAME) OPTIMIZE (sse4_1) attribute_hidden;
> +extern __typeof (REDIRECT_NAME) OPTIMIZE (avx2) attribute_hidden;
> +extern __typeof (REDIRECT_NAME) OPTIMIZE (avx2_rtm) attribute_hidden;
> +extern __typeof (REDIRECT_NAME) OPTIMIZE (evex) attribute_hidden;
> +
> +static inline void *
> +IFUNC_SELECTOR (void)
> +{
> + const struct cpu_features* cpu_features = __get_cpu_features ();
> +
> + if (CPU_FEATURE_USABLE_P (cpu_features, AVX2)
> + && CPU_FEATURE_USABLE_P (cpu_features, BMI2)
> + && CPU_FEATURE_USABLE_P (cpu_features, MOVBE)
> + && CPU_FEATURES_ARCH_P (cpu_features, AVX_Fast_Unaligned_Load))
> + {
> + if (CPU_FEATURE_USABLE_P (cpu_features, AVX512VL)
> + && CPU_FEATURE_USABLE_P (cpu_features, AVX512BW))
> + return OPTIMIZE (evex);
> +
> + if (CPU_FEATURE_USABLE_P (cpu_features, RTM))
> + return OPTIMIZE (avx2_rtm);
> +
> + if (!CPU_FEATURES_ARCH_P (cpu_features, Prefer_No_VZEROUPPER))
> + return OPTIMIZE (avx2);
> + }
> +
> + if (CPU_FEATURE_USABLE_P (cpu_features, SSE4_1))
> + return OPTIMIZE (sse4_1);
> +
> + return OPTIMIZE (sse2);
> +}
> diff --git a/sysdeps/x86_64/multiarch/ifunc-impl-list.c
> b/sysdeps/x86_64/multiarch/ifunc-impl-list.c
> index 39ab10613b..dd0c393c7d 100644
> --- a/sysdeps/x86_64/multiarch/ifunc-impl-list.c
> +++ b/sysdeps/x86_64/multiarch/ifunc-impl-list.c
> @@ -38,6 +38,29 @@ __libc_ifunc_impl_list (const char *name, struct
> libc_ifunc_impl *array,
>
> size_t i = 0;
>
> + /* Support sysdeps/x86_64/multiarch/bcmp.c. */
> + IFUNC_IMPL (i, name, bcmp,
> + IFUNC_IMPL_ADD (array, i, bcmp,
> + (CPU_FEATURE_USABLE (AVX2)
> + && CPU_FEATURE_USABLE (MOVBE)
> + && CPU_FEATURE_USABLE (BMI2)),
> + __bcmp_avx2)
> + IFUNC_IMPL_ADD (array, i, bcmp,
> + (CPU_FEATURE_USABLE (AVX2)
> + && CPU_FEATURE_USABLE (BMI2)
> + && CPU_FEATURE_USABLE (MOVBE)
> + && CPU_FEATURE_USABLE (RTM)),
> + __bcmp_avx2_rtm)
> + IFUNC_IMPL_ADD (array, i, bcmp,
> + (CPU_FEATURE_USABLE (AVX512VL)
> + && CPU_FEATURE_USABLE (AVX512BW)
> + && CPU_FEATURE_USABLE (MOVBE)
> + && CPU_FEATURE_USABLE (BMI2)),
> + __bcmp_evex)
> + IFUNC_IMPL_ADD (array, i, bcmp, CPU_FEATURE_USABLE (SSE4_1),
> + __bcmp_sse4_1)
> + IFUNC_IMPL_ADD (array, i, bcmp, 1, __bcmp_sse2))
> +
> /* Support sysdeps/x86_64/multiarch/memchr.c. */
> IFUNC_IMPL (i, name, memchr,
> IFUNC_IMPL_ADD (array, i, memchr,
> diff --git a/sysdeps/x86_64/multiarch/memcmp-sse2.S
> b/sysdeps/x86_64/multiarch/memcmp-sse2.S
> index b135fa2d40..2a4867ad18 100644
> --- a/sysdeps/x86_64/multiarch/memcmp-sse2.S
> +++ b/sysdeps/x86_64/multiarch/memcmp-sse2.S
> @@ -17,7 +17,9 @@
> <https://www.gnu.org/licenses/>. */
>
> #if IS_IN (libc)
> -# define memcmp __memcmp_sse2
> +# ifndef memcmp
> +# define memcmp __memcmp_sse2
> +# endif
>
> # ifdef SHARED
> # undef libc_hidden_builtin_def
> diff --git a/sysdeps/x86_64/multiarch/memcmp.c
> b/sysdeps/x86_64/multiarch/memcmp.c
> index fe725f3563..1760e045df 100644
> --- a/sysdeps/x86_64/multiarch/memcmp.c
> +++ b/sysdeps/x86_64/multiarch/memcmp.c
> @@ -27,8 +27,6 @@
> # include "ifunc-memcmp.h"
>
> libc_ifunc_redirected (__redirect_memcmp, memcmp, IFUNC_SELECTOR ());
> -# undef bcmp
> -weak_alias (memcmp, bcmp)
>
> # ifdef SHARED
> __hidden_ver1 (memcmp, __GI_memcmp, __redirect_memcmp)
> --
> 2.25.1
>
>
bcmp is an obsolescent function that no modern programs should be using,
and it's not in the implementation namespace either so compilers shouldn't
translate memcmp calls to bcmp.
If you want to define memcmp ABI variants optimized for particular usages,
I suggest the following:
1. Add reserved-namespace names for such variants to the x86_64 psABI
document (working with the ABI mailing list). The 32-bit Arm RTABI
<https://github.com/ARM-software/abi-aa/blob/main/rtabi32/rtabi32.rst>
provides a precedent for defining such function variants in a psABI (it
includes various __aeabi_mem*, though no memcmp variants).
2. Add those names to glibc, as well as teaching compilers to generate
calls to them (with appropriate conditionals for whether the functions are
known to be available in the target libc; in GCC, that would be based on
GCC_GLIBC_VERSION_GTE_IFELSE configure tests for targets using glibc).
As a variant, you could define such names as architecture-independent GNU
extensions rather than in a psABI, especially if there's nothing
architecture-specific about the variants you think are useful (e.g. no use
for having changes to calling conventions / call-clobbered registers for
the variants). But what should not be done in any case is tying an
optimization to an obsolescent non-reserved name - any such optimized
variants should use only implementation-namespace names.
On Tue, Sep 14, 2021, at 8:00 PM, Joseph Myers wrote:
> bcmp is an obsolescent function that no modern programs should be using,
> and it's not in the implementation namespace either so compilers shouldn't
> translate memcmp calls to bcmp.
I want to add that glibc has made bcmp an alias for memcmp for many years, which means that Linux- or Hurd-specific programs that are still using bcmp may have come to depend on its return value indicating ordering rather than just equality. I myself had been under the impression that they were *specified* exactly the same, until this thread prompted me to double-check the specifications. As such I don't think it's safe for *glibc* to accept patches that optimize bcmp separately from memcmp.
I do rather like the idea of a __gnu_memeq() that compilers could optimize memcmp calls to, when they can prove that the result is used only for its truth value.
zw
* Zack Weinberg via Libc-alpha:
> On Tue, Sep 14, 2021, at 8:00 PM, Joseph Myers wrote:
>> bcmp is an obsolescent function that no modern programs should be using,
>> and it's not in the implementation namespace either so compilers shouldn't
>> translate memcmp calls to bcmp.
>
> I want to add that glibc has made bcmp an alias for memcmp for many
> years, which means that Linux- or Hurd-specific programs that are
> still using bcmp may have come to depend on its return value
> indicating ordering rather than just equality. I myself had been
> under the impression that they were *specified* exactly the same,
> until this thread prompted me to double-check the specifications. As
> such I don't think it's safe for *glibc* to accept patches that
> optimize bcmp separately from memcmp.
That's a very good point.
> I do rather like the idea of a __gnu_memeq() that compilers could
> optimize memcmp calls to, when they can prove that the result is used
> only for its truth value.
Yes, we should use a name in the implementation namespace because even
if we pick an obvious like memequal, it will probably come back under a
different name from the C committee.
Thanks,
Florian
On Wed, Sep 15, 2021 at 9:02 AM Florian Weimer via Libc-alpha <
libc-alpha@sourceware.org> wrote:
> * Zack Weinberg via Libc-alpha:
>
> > On Tue, Sep 14, 2021, at 8:00 PM, Joseph Myers wrote:
> >> bcmp is an obsolescent function that no modern programs should be
> using,
> >> and it's not in the implementation namespace either so compilers
> shouldn't
> >> translate memcmp calls to bcmp.
> >
> > I want to add that glibc has made bcmp an alias for memcmp for many
> > years, which means that Linux- or Hurd-specific programs that are
> > still using bcmp may have come to depend on its return value
> > indicating ordering rather than just equality. I myself had been
> > under the impression that they were *specified* exactly the same,
> > until this thread prompted me to double-check the specifications. As
> > such I don't think it's safe for *glibc* to accept patches that
> > optimize bcmp separately from memcmp.
>
> That's a very good point.
>
> > I do rather like the idea of a __gnu_memeq() that compilers could
> > optimize memcmp calls to, when they can prove that the result is used
> > only for its truth value.
>
> Yes, we should use a name in the implementation namespace because even
> if we pick an obvious like memequal, it will probably come back under a
> different name from the C committee.
>
+1
What would be the steps for getting that into GLIBC?
>
> Thanks,
> Florian
>
>
On Wed, 15 Sep 2021, Noah Goldstein via Libc-alpha wrote:
> > > I do rather like the idea of a __gnu_memeq() that compilers could
> > > optimize memcmp calls to, when they can prove that the result is used
> > > only for its truth value.
> >
> > Yes, we should use a name in the implementation namespace because even
> > if we pick an obvious like memequal, it will probably come back under a
> > different name from the C committee.
> >
>
> +1
>
> What would be the steps for getting that into GLIBC?
Define what the exact interface you want is (the exact function type and
(reserved) name and semantics of the return value and arguments;
explicitly including details such as whether the full n bytes of each
argument are required to be mapped into memory even if they compare
unequal before n bytes).
Discuss it on the libc-coord mailing list (probably include compiler
mailing lists as well) to get agreement on semantics that are good for
both libc implementations and for compilers to generate; it's best if this
interface is acceptable to multiple libc implementations and suitable for
multiple compilers to generate calls to (when available in libc).
Implement in glibc, across all glibc ports and including all the ABI test
baseline updates. If the semantics are such that an alias to memcmp is a
valid implementation, that probably means adding such an alias to every
memcmp implementation in glibc (and verifying with build-many-glibcs.py
that they all build and pass the ABI tests), as well as allowing for
architectures to add their own separate implementation of the new function
if they wish. There should also be execution tests that the new function
works correctly at runtime (with different alignment, arguments just
before unmapped pages, etc., as with other string function tests). If the
new function is purely an ABI, not an API, it doesn't need user manual
documentation, however (although there will at least need to be a comment
giving the detailed semantics that were agreed on libc-coord).
On Wed, Sep 15, 2021 at 1:30 PM Joseph Myers <joseph@codesourcery.com>
wrote:
> On Wed, 15 Sep 2021, Noah Goldstein via Libc-alpha wrote:
>
> > > > I do rather like the idea of a __gnu_memeq() that compilers could
> > > > optimize memcmp calls to, when they can prove that the result is used
> > > > only for its truth value.
> > >
> > > Yes, we should use a name in the implementation namespace because even
> > > if we pick an obvious like memequal, it will probably come back under a
> > > different name from the C committee.
> > >
> >
> > +1
> >
> > What would be the steps for getting that into GLIBC?
>
> Define what the exact interface you want is (the exact function type and
> (reserved) name and semantics of the return value and arguments;
> explicitly including details such as whether the full n bytes of each
> argument are required to be mapped into memory even if they compare
> unequal before n bytes).
>
> Discuss it on the libc-coord mailing list (probably include compiler
> mailing lists as well) to get agreement on semantics that are good for
> both libc implementations and for compilers to generate; it's best if this
> interface is acceptable to multiple libc implementations and suitable for
> multiple compilers to generate calls to (when available in libc).
>
> Implement in glibc, across all glibc ports and including all the ABI test
> baseline updates. If the semantics are such that an alias to memcmp is a
> valid implementation, that probably means adding such an alias to every
> memcmp implementation in glibc (and verifying with build-many-glibcs.py
> that they all build and pass the ABI tests), as well as allowing for
> architectures to add their own separate implementation of the new function
> if they wish. There should also be execution tests that the new function
> works correctly at runtime (with different alignment, arguments just
> before unmapped pages, etc., as with other string function tests). If the
> new function is purely an ABI, not an API, it doesn't need user manual
> documentation, however (although there will at least need to be a comment
> giving the detailed semantics that were agreed on libc-coord).
>
>
Is there some documentation for how to effectively use build-many-glibcs.py
I've tried:
$> python3 src/glibc/scripts/build-many-glibcs.py /some/were checkout
gcc-vcs-11
$> python3 src/glibc/scripts/build-many-glibcs.py /some/were host-libraries
$> python3 src/glibc/scripts/build-many-glibcs.py /some/were compilers
$> python3 src/glibc/scripts/build-many-glibcs.py /some/were glibcs
With GLIBC master I'm seeing a ton of failures so I'm not sure how I'm
supposed to actually test my patches.
I've also tried with gcc-vcs-mainline although my guess is that it will
just be a less stable version that could cause unrelated failures.
> --
> Joseph S. Myers
> joseph@codesourcery.com
>
* Noah Goldstein:
> Is there some documentation for how to effectively use build-many-glibcs.py
>
> I've tried:
>
> $> python3 src/glibc/scripts/build-many-glibcs.py /some/were checkout gcc-vcs-11
(gcc-vcs-11 is actually the current default.)
> $> python3 src/glibc/scripts/build-many-glibcs.py /some/were host-libraries
> $> python3 src/glibc/scripts/build-many-glibcs.py /some/were compilers
> $> python3 src/glibc/scripts/build-many-glibcs.py /some/were glibcs
>
> With GLIBC master I'm seeing a ton of failures so I'm not sure how I'm
> supposed to actually test my patches.
Running build-many-glibcs.py is not a requirement for patch submission.
(One run that completes in a somewhat reasonable amount of time costs
10 USD to 20 USD in the public cloud, after all.)
I just tried a run, and it passes for me without errors. Joseph's
tester also produces clean reports for GCC 11.
Which errors do you encounter? For investigation, it may be prudent to
build with “--keep failed”. Logs are always preserved. For the Linux
targets, they can be found in logs/glibcs/…/004*.log.txt for the build
phase, and logs/glibcs/…/007*.log.txt for the check phase.
Common sources of errors are lack of disk space or memory. I think
below 1 GiB RAM per core, it gets a bit tight, and you may have to
reduce parallelism using -j.
Thanks,
Florian
On Mon, Sep 27, 2021 at 2:29 AM Florian Weimer <fweimer@redhat.com> wrote:
> * Noah Goldstein:
>
> > Is there some documentation for how to effectively use
> build-many-glibcs.py
> >
> > I've tried:
> >
> > $> python3 src/glibc/scripts/build-many-glibcs.py /some/were checkout
> gcc-vcs-11
>
> (gcc-vcs-11 is actually the current default.)
>
> > $> python3 src/glibc/scripts/build-many-glibcs.py /some/were
> host-libraries
> > $> python3 src/glibc/scripts/build-many-glibcs.py /some/were compilers
> > $> python3 src/glibc/scripts/build-many-glibcs.py /some/were glibcs
> >
> > With GLIBC master I'm seeing a ton of failures so I'm not sure how I'm
> > supposed to actually test my patches.
>
> Running build-many-glibcs.py is not a requirement for patch submission.
> (One run that completes in a somewhat reasonable amount of time costs
> 10 USD to 20 USD in the public cloud, after all.)
>
> I just tried a run, and it passes for me without errors. Joseph's
> tester also produces clean reports for GCC 11.
>
> Which errors do you encounter? For investigation, it may be prudent to
> build with “--keep failed”. Logs are always preserved. For the Linux
> targets, they can be found in logs/glibcs/…/004*.log.txt for the build
> phase, and logs/glibcs/…/007*.log.txt for the check phase.
>
> Common sources of errors are lack of disk space or memory. I think
> below 1 GiB RAM per core, it gets a bit tight, and you may have to
> reduce parallelism using -j.
>
So I essentially get an error at the first build step in compilers (same
for any target)
i.e
FAIL: compilers-arc-linux-gnu binutils build
Looking inside the log I see:
```
/some/were/src/binutils/gas/as.c:110:31: error:
‘DEFAULT_GENERATE_ELF_STT_COMMON’ undeclared here (not in a function)
110 | int flag_use_elf_stt_common = DEFAULT_GENERATE_ELF_STT_COMMON;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/some/were/src/binutils/gas/as.c:111:34: error:
‘DEFAULT_GENERATE_BUILD_NOTES’ undeclared here (not in a function)
111 | bool flag_generate_build_notes = DEFAULT_GENERATE_BUILD_NOTES;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
/some/were/src/binutils/gas/as.c: In function ‘print_version_id’:
/some/were/src/binutils/gas/as.c:237:21: error: ‘TARGET_ALIAS’ undeclared
(first use in this function); did you mean ‘TARGET_ARCH’?
237 | VERSION, TARGET_ALIAS, BFD_VERSION_STRING);
| ^~~~~~~~~~~~
| TARGET_ARCH
/some/were/src/binutils/gas/as.c:237:21: note: each undeclared identifier
is reported only once for each function it appears in
/some/were/src/binutils/gas/as.c: In function ‘parse_args’:
/some/were/src/binutils/gas/as.c:700:19: error: ‘TARGET_ALIAS’ undeclared
(first use in this function); did you mean ‘TARGET_ARCH’?
700 | TARGET_ALIAS);
| ^~~~~~~~~~~~
| TARGET_ARCH
/some/were/src/binutils/gas/as.c:715:51: error: ‘TARGET_CANONICAL’
undeclared (first use in this function)
715 | fprintf (stderr, _("canonical = %s\n"), TARGET_CANONICAL);
| ^~~~~~~~~~~~~~~~
/some/were/src/binutils/gas/as.c:716:50: error: ‘TARGET_CPU’ undeclared
(first use in this function)
716 | fprintf (stderr, _("cpu-type = %s\n"), TARGET_CPU);
| ^~~~~~~~~~
make[5]: *** [Makefile:1238: as.o] Error 1
make[5]: Leaving directory
'/some/were/build/compilers/arc-linux-gnu/binutils/gas'
make[4]: *** [Makefile:1283: all-recursive] Error 1
make[3]: *** [Makefile:819: all] Error 2
make[2]: *** [Makefile:4990: all-gas] Error 2
make[1]: *** [Makefile:903: all] Error 2
FAIL: compilers-arc-linux-gnu binutils build
```
All the ensuing GLIBC builds result in UNRESOLVED i.e:
UNRESOLVED: glibcs-x86_64-linux-gnu build
```
Description: glibcs-x86_64-linux-gnu build
Command: make
Directory: /some/were/build/glibcs/x86_64-linux-gnu/glibc
Path addition: /some/were/install/compilers/x86_64-linux-gnu/bin
UNRESOLVED: glibcs-x86_64-linux-gnu build
```
> Thanks,
> Florian
>
>
* Noah Goldstein:
> So I essentially get an error at the first build step in compilers (same for any target)
>
> i.e
>
> FAIL: compilers-arc-linux-gnu binutils build
>
> Looking inside the log I see:
>
> ```
> /some/were/src/binutils/gas/as.c:110:31: error: ‘DEFAULT_GENERATE_ELF_STT_COMMON’
> undeclared here (not in a function)
> 110 | int flag_use_elf_stt_common = DEFAULT_GENERATE_ELF_STT_COMMON;
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is quite weird. It means that something went wrong when running
configure because it should be defined unconditionally. I haven't seen
a report of this error before.
Do you use site defaults for autoconf or something like that?
Could you please check what's in config.log for the binutils build?
(You may have to pass --keep failed to the Python script.)
Thanks,
Florian
On Mon, 27 Sep 2021, Florian Weimer via Libc-alpha wrote:
> * Noah Goldstein:
>
> > Is there some documentation for how to effectively use build-many-glibcs.py
> >
> > I've tried:
> >
> > $> python3 src/glibc/scripts/build-many-glibcs.py /some/were checkout gcc-vcs-11
>
> (gcc-vcs-11 is actually the current default.)
>
> > $> python3 src/glibc/scripts/build-many-glibcs.py /some/were host-libraries
> > $> python3 src/glibc/scripts/build-many-glibcs.py /some/were compilers
> > $> python3 src/glibc/scripts/build-many-glibcs.py /some/were glibcs
> >
> > With GLIBC master I'm seeing a ton of failures so I'm not sure how I'm
> > supposed to actually test my patches.
>
> Running build-many-glibcs.py is not a requirement for patch submission.
> (One run that completes in a somewhat reasonable amount of time costs
> 10 USD to 20 USD in the public cloud, after all.)
However, it's certainly a good idea, when proposing a patch changing all
the architecture-specific memcmp implementations to add a new alias, to
test building at least one configuration using each such implementation
(which is a smaller set than the full set of build-many-glibcs.py
configurations).
On Mon, Sep 27, 2021 at 12:42 PM Joseph Myers <joseph@codesourcery.com>
wrote:
> On Mon, 27 Sep 2021, Florian Weimer via Libc-alpha wrote:
>
> > * Noah Goldstein:
> >
> > > Is there some documentation for how to effectively use
> build-many-glibcs.py
> > >
> > > I've tried:
> > >
> > > $> python3 src/glibc/scripts/build-many-glibcs.py /some/were checkout
> gcc-vcs-11
> >
> > (gcc-vcs-11 is actually the current default.)
> >
> > > $> python3 src/glibc/scripts/build-many-glibcs.py /some/were
> host-libraries
> > > $> python3 src/glibc/scripts/build-many-glibcs.py /some/were compilers
> > > $> python3 src/glibc/scripts/build-many-glibcs.py /some/were glibcs
> > >
> > > With GLIBC master I'm seeing a ton of failures so I'm not sure how I'm
> > > supposed to actually test my patches.
> >
> > Running build-many-glibcs.py is not a requirement for patch submission.
> > (One run that completes in a somewhat reasonable amount of time costs
> > 10 USD to 20 USD in the public cloud, after all.)
>
> However, it's certainly a good idea, when proposing a patch changing all
> the architecture-specific memcmp implementations to add a new alias, to
> test building at least one configuration using each such implementation
> (which is a smaller set than the full set of build-many-glibcs.py
> configurations).
>
Agreed. Hence I'm trying to get it working before posting my patch.
>
> --
> Joseph S. Myers
> joseph@codesourcery.com
>
On Mon, Sep 27, 2021 at 11:54 AM Florian Weimer <fweimer@redhat.com> wrote:
> * Noah Goldstein:
>
> > So I essentially get an error at the first build step in compilers (same
> for any target)
> >
> > i.e
> >
> > FAIL: compilers-arc-linux-gnu binutils build
> >
> > Looking inside the log I see:
> >
> > ```
> > /some/were/src/binutils/gas/as.c:110:31: error:
> ‘DEFAULT_GENERATE_ELF_STT_COMMON’
> > undeclared here (not in a function)
> > 110 | int flag_use_elf_stt_common = DEFAULT_GENERATE_ELF_STT_COMMON;
> > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> This is quite weird. It means that something went wrong when running
> configure because it should be defined unconditionally. I haven't seen
> a report of this error before.
>
> Do you use site defaults for autoconf or something like that?
>
> Could you please check what's in config.log for the binutils build?
> (You may have to pass --keep failed to the Python script.)
>
Full command im using.
$> python3 src/glibc/scripts/build-many-glibcs.py build-many/ checkout
gcc-vcs-11; echo "Host Libraries"; python3
src/glibc/scripts/build-many-glibcs.py build-many host-libraries
--keep=all; echo "Compilers"; python3
src/glibc/scripts/build-many-glibcs.py build-many compilers
x86_64-linux-gnu --keep=all; echo "GLIBC"; python3
src/glibc/scripts/build-many-glibcs.py build-many glibcs --keep=all
binutils configure seems to PASS. Here is the full log file for
x86-64-linux-gnu (my host).
Note the build for x86-64 binutils still fails with the same error as arc.
```
$> cat
build-many/logs/compilers/x86_64-linux-gnu/003-compilers-x86_64-linux-gnu-binutils-configure-log.txt
Mon 27 Sep 2021 12:44:53 PM CDT
Description: compilers-x86_64-linux-gnu binutils configure
Command: /some/were/src/binutils/configure
'--prefix=/some/were/install/compilers/x86_64-linux-gnu'
'--build=x86_64-pc-linux-gnu' '--host=x86_64-pc-linux-gnu'
'--target=x86_64-glibc-linux-gnu'
'--with-sysroot=/some/were/install/compilers/x86_64-linux-gnu/sysroot'
--disable-gdb --disable-gdbserver --disable-libdecnumber --disable-readline
--disable-sim
Directory: /some/were/build/compilers/x86_64-linux-gnu/binutils
Path addition: /some/were/install/compilers/x86_64-linux-gnu/bin
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking target system type... x86_64-glibc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for a sed that does not truncate output... /usr/bin/sed
checking for gawk... gawk
checking for x86_64-pc-linux-gnu-gcc... no
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for gcc option to accept ISO C99... none needed
checking for x86_64-pc-linux-gnu-g++... no
checking for x86_64-pc-linux-gnu-c++... no
checking for x86_64-pc-linux-gnu-gpp... no
checking for x86_64-pc-linux-gnu-aCC... no
checking for x86_64-pc-linux-gnu-CC... no
checking for x86_64-pc-linux-gnu-cxx... no
checking for x86_64-pc-linux-gnu-cc++... no
checking for x86_64-pc-linux-gnu-cl.exe... no
checking for x86_64-pc-linux-gnu-FCC... no
checking for x86_64-pc-linux-gnu-KCC... no
checking for x86_64-pc-linux-gnu-RCC... no
checking for x86_64-pc-linux-gnu-xlC_r... no
checking for x86_64-pc-linux-gnu-xlC... no
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether g++ accepts -static-libstdc++ -static-libgcc... yes
checking for x86_64-pc-linux-gnu-gnatbind... no
checking for gnatbind... no
checking for x86_64-pc-linux-gnu-gnatmake... no
checking for gnatmake... no
checking whether compiler driver understands Ada... no
checking how to compare bootstrapped objects... cmp --ignore-initial=16
$$f1 $$f2
checking for objdir... .libs
checking for isl 0.15 or later... no
required isl version is 0.15 or later
*** This configuration is not supported in the following subdirectories:
readline libdecnumber sim gdb gdbserver
(Any other directories should still work fine.)
checking for default BUILD_CONFIG...
checking for --enable-vtable-verify... no
checking for bison... bison -y
checking for bison... bison
checking for gm4... no
checking for gnum4... no
checking for m4... m4
checking for flex... flex
checking for flex... flex
checking for makeinfo... makeinfo
checking for expect... no
checking for runtest... no
checking for x86_64-pc-linux-gnu-ar... no
checking for ar... ar
checking for x86_64-pc-linux-gnu-as... no
checking for as... as
checking for x86_64-pc-linux-gnu-dlltool... no
checking for dlltool... no
checking for x86_64-pc-linux-gnu-ld... no
checking for ld... ld
checking for x86_64-pc-linux-gnu-lipo... no
checking for lipo... no
checking for x86_64-pc-linux-gnu-nm... no
checking for nm... nm
checking for x86_64-pc-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking for x86_64-pc-linux-gnu-strip... no
checking for strip... strip
checking for x86_64-pc-linux-gnu-windres... no
checking for windres... no
checking for x86_64-pc-linux-gnu-windmc... no
checking for windmc... no
checking for x86_64-pc-linux-gnu-objcopy... no
checking for objcopy... objcopy
checking for x86_64-pc-linux-gnu-objdump... no
checking for objdump... objdump
checking for x86_64-pc-linux-gnu-readelf... no
checking for readelf... readelf
checking for -plugin option... checking for x86_64-pc-linux-gnu-ar...
(cached) ar
--plugin /usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so
checking for x86_64-glibc-linux-gnu-cc... no
checking for x86_64-glibc-linux-gnu-gcc... no
checking for x86_64-glibc-linux-gnu-c++... no
checking for x86_64-glibc-linux-gnu-g++... no
checking for x86_64-glibc-linux-gnu-cxx... no
checking for x86_64-glibc-linux-gnu-gxx... no
checking for x86_64-glibc-linux-gnu-gcc... no
checking for x86_64-glibc-linux-gnu-gfortran... no
checking for x86_64-glibc-linux-gnu-gccgo... no
checking for x86_64-glibc-linux-gnu-ar... no
checking for x86_64-glibc-linux-gnu-as... no
checking for x86_64-glibc-linux-gnu-dlltool... no
checking for x86_64-glibc-linux-gnu-ld... no
checking for x86_64-glibc-linux-gnu-lipo... no
checking for x86_64-glibc-linux-gnu-nm... no
checking for x86_64-glibc-linux-gnu-objcopy... no
checking for x86_64-glibc-linux-gnu-objdump... no
checking for x86_64-glibc-linux-gnu-ranlib... no
checking for x86_64-glibc-linux-gnu-readelf... no
checking for x86_64-glibc-linux-gnu-strip... no
checking for x86_64-glibc-linux-gnu-windres... no
checking for x86_64-glibc-linux-gnu-windmc... no
checking where to find the target ar... just compiled
checking where to find the target as... just compiled
checking where to find the target cc... pre-installed
checking where to find the target c++... pre-installed
checking where to find the target c++ for libstdc++... pre-installed
checking where to find the target dlltool... just compiled
checking where to find the target gcc... pre-installed
checking where to find the target gfortran... pre-installed
checking where to find the target gccgo... pre-installed
checking where to find the target ld... just compiled
checking where to find the target lipo... pre-installed
checking where to find the target nm... just compiled
checking where to find the target objcopy... just compiled
checking where to find the target objdump... just compiled
checking where to find the target ranlib... just compiled
checking where to find the target readelf... just compiled
checking where to find the target strip... just compiled
checking where to find the target windres... just compiled
checking where to find the target windmc... just compiled
checking whether to enable maintainer-specific portions of Makefiles... no
configure: creating ./config.status
config.status: creating Makefile
PASS: compilers-x86_64-linux-gnu binutils configure
Mon 27 Sep 2021 12:44:54 PM CDT
```
> Thanks,
> Florian
>
>
* Noah Goldstein:
> $> cat
> build-many/logs/compilers/x86_64-linux-gnu/003-compilers-x86_64-linux-gnu-binutils-configure-log.txt
There should be a config.log file in the binutils build directory (under
build-many/build/compilers). I hope this file contains illuminating
data.
Thanks,
Florian
On Mon, Sep 27, 2021 at 12:56 PM Florian Weimer <fweimer@redhat.com> wrote:
>
> * Noah Goldstein:
>
> > $> cat
> > build-many/logs/compilers/x86_64-linux-gnu/003-compilers-x86_64-linux-gnu-binutils-configure-log.txt
>
> There should be a config.log file in the binutils build directory (under
> build-many/build/compilers). I hope this file contains illuminating
> data.
Oh sorry. Here is the output of config.log
```
$> cat build-many/build/compilers/x86_64-linux-gnu/binutils/config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ /some/were/build-many/src/binutils/configure
--prefix=/some/were/build-many/install/compilers/x86_64-linux-gnu
--build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu
--target=x86_64-glibc-linux-gnu
--with-sysroot=/some/were/build-many/install/compilers/x86_64-linux-gnu/sysroot
--disable-gdb --disable-gdbserver --disable-libdecnumber
--disable-readline --disable-sim
## --------- ##
## Platform. ##
## --------- ##
hostname = noah-tigerlake
uname -m = x86_64
uname -r = 5.11.0-27-generic
uname -s = Linux
uname -v = #29~20.04.1-Ubuntu SMP Wed Aug 11 15:58:17 UTC 2021
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /some/were/build-many/install/compilers/x86_64-linux-gnu/bin
PATH: /home/noah/programs/libraries/
PATH: /home/noah/.local/bin
PATH: /home/noah/programs/pyscripts
PATH: /home/noah/scripts
PATH: /home/noah/programs/libraries/
PATH: /home/noah/.local/bin
PATH: /home/noah/programs/pyscripts
PATH: /home/noah/scripts
PATH: /home/noah/.local/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2348: checking build system type
configure:2362: result: x86_64-pc-linux-gnu
configure:2409: checking host system type
configure:2422: result: x86_64-pc-linux-gnu
configure:2442: checking target system type
configure:2455: result: x86_64-glibc-linux-gnu
configure:2509: checking for a BSD-compatible install
configure:2577: result: /usr/bin/install -c
configure:2588: checking whether ln works
configure:2610: result: yes
configure:2614: checking whether ln -s works
configure:2618: result: yes
configure:2625: checking for a sed that does not truncate output
configure:2689: result: /usr/bin/sed
configure:2698: checking for gawk
configure:2714: found /usr/bin/gawk
configure:2725: result: gawk
configure:4021: checking for x86_64-pc-linux-gnu-gcc
configure:4051: result: no
configure:4061: checking for gcc
configure:4077: found /usr/bin/gcc
configure:4088: result: gcc
configure:4317: checking for C compiler version
configure:4326: gcc --version >&5
gcc (Ubuntu 11.1.0-1ubuntu1~20.04) 11.1.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:4337: $? = 0
configure:4326: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu
11.1.0-1ubuntu1~20.04'
--with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs
--enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2
--prefix=/usr --with-gcc-major-version-only --program-suffix=-11
--program-prefix=x86_64-linux-gnu- --enable-shared
--enable-linker-build-id --libexecdir=/usr/lib
--without-included-gettext --enable-threads=posix --libdir=/usr/lib
--enable-nls --enable-bootstrap --enable-clocale=gnu
--enable-libstdcxx-debug --enable-libstdcxx-time=yes
--with-default-libstdcxx-abi=new --enable-gnu-unique-object
--disable-vtable-verify --enable-plugin --enable-default-pie
--with-system-zlib --enable-libphobos-checking=release
--with-target-system-zlib=auto --enable-objc-gc=auto
--enable-multiarch --disable-werror --disable-cet --with-arch-32=i686
--with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib
--with-tune=generic
--enable-offload-targets=nvptx-none=/build/gcc-11-2V7zgg/gcc-11-11.1.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-2V7zgg/gcc-11-11.1.0/debian/tmp-gcn/usr
--without-cuda-driver --enable-checking=release
--build=x86_64-linux-gnu --host=x86_64-linux-gnu
--target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean
--enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.1.0 (Ubuntu 11.1.0-1ubuntu1~20.04)
... rest of stderr output deleted ...
configure:4337: $? = 0
configure:4326: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:4337: $? = 1
configure:4326: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean
'--version'?
gcc: fatal error: no input files
compilation terminated.
configure:4337: $? = 1
configure:4357: checking whether the C compiler works
configure:4379: gcc conftest.c >&5
configure:4383: $? = 0
configure:4431: result: yes
configure:4434: checking for C compiler default output file name
configure:4436: result: a.out
configure:4442: checking for suffix of executables
configure:4449: gcc -o conftest conftest.c >&5
configure:4453: $? = 0
configure:4475: result:
configure:4497: checking whether we are cross compiling
configure:4505: gcc -o conftest conftest.c >&5
configure:4509: $? = 0
configure:4516: ./conftest
configure:4520: $? = 0
configure:4508: result: no
configure:4513: checking for suffix of object files
configure:4535: gcc -c conftest.c >&5
configure:4539: $? = 0
configure:4560: result: o
configure:4564: checking whether we are using the GNU C compiler
configure:4583: gcc -c conftest.c >&5
configure:4583: $? = 0
configure:4592: result: yes
configure:4601: checking whether gcc accepts -g
configure:4621: gcc -c -g conftest.c >&5
configure:4621: $? = 0
configure:4662: result: yes
configure:4679: checking for gcc option to accept ISO C89
configure:4742: gcc -c -g -O2 conftest.c >&5
configure:4742: $? = 0
configure:4755: result: none needed
configure:4775: checking for gcc option to accept ISO C99
configure:4924: gcc -c -g -O2 conftest.c >&5
configure:4924: $? = 0
configure:4937: result: none needed
configure:4966: checking for x86_64-pc-linux-gnu-g++
configure:4996: result: no
configure:4966: checking for x86_64-pc-linux-gnu-c++
configure:4996: result: no
configure:4966: checking for x86_64-pc-linux-gnu-gpp
configure:4996: result: no
configure:4966: checking for x86_64-pc-linux-gnu-aCC
configure:4996: result: no
configure:4966: checking for x86_64-pc-linux-gnu-CC
configure:4996: result: no
configure:4966: checking for x86_64-pc-linux-gnu-cxx
configure:4996: result: no
configure:4966: checking for x86_64-pc-linux-gnu-cc++
configure:4996: result: no
configure:4966: checking for x86_64-pc-linux-gnu-cl.exe
configure:4996: result: no
configure:4966: checking for x86_64-pc-linux-gnu-FCC
configure:4996: result: no
configure:4966: checking for x86_64-pc-linux-gnu-KCC
configure:4996: result: no
configure:4966: checking for x86_64-pc-linux-gnu-RCC
configure:4996: result: no
configure:4966: checking for x86_64-pc-linux-gnu-xlC_r
configure:4996: result: no
configure:4966: checking for x86_64-pc-linux-gnu-xlC
configure:4996: result: no
configure:5010: checking for g++
configure:5026: found /usr/bin/g++
configure:5037: result: g++
configure:5064: checking for C++ compiler version
configure:5073: g++ --version >&5
g++ (Ubuntu 11.1.0-1ubuntu1~20.04) 11.1.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:5084: $? = 0
configure:5073: g++ -v >&5
Using built-in specs.
COLLECT_GCC=g++
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu
11.1.0-1ubuntu1~20.04'
--with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs
--enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2
--prefix=/usr --with-gcc-major-version-only --program-suffix=-11
--program-prefix=x86_64-linux-gnu- --enable-shared
--enable-linker-build-id --libexecdir=/usr/lib
--without-included-gettext --enable-threads=posix --libdir=/usr/lib
--enable-nls --enable-bootstrap --enable-clocale=gnu
--enable-libstdcxx-debug --enable-libstdcxx-time=yes
--with-default-libstdcxx-abi=new --enable-gnu-unique-object
--disable-vtable-verify --enable-plugin --enable-default-pie
--with-system-zlib --enable-libphobos-checking=release
--with-target-system-zlib=auto --enable-objc-gc=auto
--enable-multiarch --disable-werror --disable-cet --with-arch-32=i686
--with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib
--with-tune=generic
--enable-offload-targets=nvptx-none=/build/gcc-11-2V7zgg/gcc-11-11.1.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-2V7zgg/gcc-11-11.1.0/debian/tmp-gcn/usr
--without-cuda-driver --enable-checking=release
--build=x86_64-linux-gnu --host=x86_64-linux-gnu
--target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean
--enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.1.0 (Ubuntu 11.1.0-1ubuntu1~20.04)
... rest of stderr output deleted ...
configure:5084: $? = 0
configure:5073: g++ -V >&5
g++: error: unrecognized command-line option '-V'
g++: fatal error: no input files
compilation terminated.
configure:5084: $? = 1
configure:5073: g++ -qversion >&5
g++: error: unrecognized command-line option '-qversion'; did you mean
'--version'?
g++: fatal error: no input files
compilation terminated.
configure:5084: $? = 1
configure:5088: checking whether we are using the GNU C++ compiler
configure:5107: g++ -c conftest.cpp >&5
configure:5107: $? = 0
configure:5116: result: yes
configure:5125: checking whether g++ accepts -g
configure:5145: g++ -c -g conftest.cpp >&5
configure:5145: $? = 0
configure:5186: result: yes
configure:5235: checking whether g++ accepts -static-libstdc++ -static-libgcc
configure:5252: g++ -o conftest -g -O2 -static-libstdc++
-static-libgcc conftest.cpp >&5
configure:5252: $? = 0
configure:5253: result: yes
configure:5277: checking for x86_64-pc-linux-gnu-gnatbind
configure:5307: result: no
configure:5317: checking for gnatbind
configure:5347: result: no
configure:5369: checking for x86_64-pc-linux-gnu-gnatmake
configure:5399: result: no
configure:5409: checking for gnatmake
configure:5439: result: no
configure:5458: checking whether compiler driver understands Ada
configure:5481: result: no
configure:5490: checking how to compare bootstrapped objects
configure:5515: result: cmp --ignore-initial=16 $$f1 $$f2
configure:5660: checking for objdir
configure:5675: result: .libs
configure:6240: checking for isl 0.15 or later
configure:6253: gcc -o conftest -g -O2 -lisl -lmpc -lmpfr -lgmp
conftest.c -lisl -lgmp >&5
conftest.c:10:10: fatal error: isl/schedule.h: No such file or directory
10 | #include <isl/schedule.h>
| ^~~~~~~~~~~~~~~~
compilation terminated.
configure:6253: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h. */
| #include <isl/schedule.h>
| int
| main ()
| {
| isl_options_set_schedule_serialize_sccs (NULL, 0);
| ;
| return 0;
| }
configure:6260: result: no
configure:6264: result: required isl version is 0.15 or later
configure:7357: checking for default BUILD_CONFIG
configure:7389: result:
configure:7394: checking for --enable-vtable-verify
configure:7407: result: no
configure:8028: checking for bison
configure:8044: found /usr/bin/bison
configure:8055: result: bison -y
configure:8075: checking for bison
configure:8091: found /usr/bin/bison
configure:8102: result: bison
configure:8122: checking for gm4
configure:8152: result: no
configure:8122: checking for gnum4
configure:8152: result: no
configure:8122: checking for m4
configure:8138: found /usr/bin/m4
configure:8149: result: m4
configure:8169: checking for flex
configure:8185: found /usr/bin/flex
configure:8196: result: flex
configure:8217: checking for flex
configure:8233: found /usr/bin/flex
configure:8244: result: flex
configure:8264: checking for makeinfo
configure:8280: found /usr/bin/makeinfo
configure:8291: result: makeinfo
configure:8325: checking for expect
configure:8355: result: no
configure:8374: checking for runtest
configure:8404: result: no
configure:8480: checking for x86_64-pc-linux-gnu-ar
configure:8510: result: no
configure:8519: checking for ar
configure:8535: found /usr/bin/ar
configure:8546: result: ar
configure:8621: checking for x86_64-pc-linux-gnu-as
configure:8651: result: no
configure:8660: checking for as
configure:8676: found /usr/bin/as
configure:8687: result: as
configure:8762: checking for x86_64-pc-linux-gnu-dlltool
configure:8792: result: no
configure:8801: checking for dlltool
configure:8831: result: no
configure:8903: checking for x86_64-pc-linux-gnu-ld
configure:8933: result: no
configure:8942: checking for ld
configure:8958: found /usr/bin/ld
configure:8969: result: ld
configure:9044: checking for x86_64-pc-linux-gnu-lipo
configure:9074: result: no
configure:9083: checking for lipo
configure:9113: result: no
configure:9185: checking for x86_64-pc-linux-gnu-nm
configure:9215: result: no
configure:9224: checking for nm
configure:9240: found /usr/bin/nm
configure:9251: result: nm
configure:9326: checking for x86_64-pc-linux-gnu-ranlib
configure:9356: result: no
configure:9365: checking for ranlib
configure:9381: found /usr/bin/ranlib
configure:9392: result: ranlib
configure:9462: checking for x86_64-pc-linux-gnu-strip
configure:9492: result: no
configure:9501: checking for strip
configure:9517: found /usr/bin/strip
configure:9528: result: strip
configure:9598: checking for x86_64-pc-linux-gnu-windres
configure:9628: result: no
configure:9637: checking for windres
configure:9667: result: no
configure:9739: checking for x86_64-pc-linux-gnu-windmc
configure:9769: result: no
configure:9778: checking for windmc
configure:9808: result: no
configure:9880: checking for x86_64-pc-linux-gnu-objcopy
configure:9910: result: no
configure:9919: checking for objcopy
configure:9935: found /usr/bin/objcopy
configure:9946: result: objcopy
configure:10021: checking for x86_64-pc-linux-gnu-objdump
configure:10051: result: no
configure:10060: checking for objdump
configure:10076: found /usr/bin/objdump
configure:10087: result: objdump
configure:10162: checking for x86_64-pc-linux-gnu-readelf
configure:10192: result: no
configure:10201: checking for readelf
configure:10217: found /usr/bin/readelf
configure:10228: result: readelf
configure:10254: checking for -plugin option
configure:10272: checking for x86_64-pc-linux-gnu-ar
configure:10299: result: ar
configure:10374: result: --plugin
/usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so
configure:10486: checking for x86_64-glibc-linux-gnu-cc
configure:10516: result: no
configure:10486: checking for x86_64-glibc-linux-gnu-gcc
configure:10516: result: no
configure:10647: checking for x86_64-glibc-linux-gnu-c++
configure:10677: result: no
configure:10647: checking for x86_64-glibc-linux-gnu-g++
configure:10677: result: no
configure:10647: checking for x86_64-glibc-linux-gnu-cxx
configure:10677: result: no
configure:10647: checking for x86_64-glibc-linux-gnu-gxx
configure:10677: result: no
configure:10808: checking for x86_64-glibc-linux-gnu-gcc
configure:10838: result: no
configure:10964: checking for x86_64-glibc-linux-gnu-gfortran
configure:10994: result: no
configure:11125: checking for x86_64-glibc-linux-gnu-gccgo
configure:11155: result: no
configure:11366: checking for x86_64-glibc-linux-gnu-ar
configure:11396: result: no
configure:11596: checking for x86_64-glibc-linux-gnu-as
configure:11626: result: no
configure:11826: checking for x86_64-glibc-linux-gnu-dlltool
configure:11856: result: no
configure:12056: checking for x86_64-glibc-linux-gnu-ld
configure:12086: result: no
configure:12286: checking for x86_64-glibc-linux-gnu-lipo
configure:12316: result: no
configure:12516: checking for x86_64-glibc-linux-gnu-nm
configure:12546: result: no
configure:12746: checking for x86_64-glibc-linux-gnu-objcopy
configure:12776: result: no
configure:12976: checking for x86_64-glibc-linux-gnu-objdump
configure:13006: result: no
configure:13206: checking for x86_64-glibc-linux-gnu-ranlib
configure:13236: result: no
configure:13436: checking for x86_64-glibc-linux-gnu-readelf
configure:13466: result: no
configure:13666: checking for x86_64-glibc-linux-gnu-strip
configure:13696: result: no
configure:13896: checking for x86_64-glibc-linux-gnu-windres
configure:13926: result: no
configure:14126: checking for x86_64-glibc-linux-gnu-windmc
configure:14156: result: no
configure:14223: checking where to find the target ar
configure:14246: result: just compiled
configure:14265: checking where to find the target as
configure:14288: result: just compiled
configure:14307: checking where to find the target cc
configure:14344: result: pre-installed
configure:14349: checking where to find the target c++
configure:14389: result: pre-installed
configure:14394: checking where to find the target c++ for libstdc++
configure:14434: result: pre-installed
configure:14439: checking where to find the target dlltool
configure:14462: result: just compiled
configure:14481: checking where to find the target gcc
configure:14518: result: pre-installed
configure:14523: checking where to find the target gfortran
configure:14563: result: pre-installed
configure:14568: checking where to find the target gccgo
configure:14608: result: pre-installed
configure:14613: checking where to find the target ld
configure:14636: result: just compiled
configure:14655: checking where to find the target lipo
configure:14681: result: pre-installed
configure:14686: checking where to find the target nm
configure:14709: result: just compiled
configure:14728: checking where to find the target objcopy
configure:14751: result: just compiled
configure:14770: checking where to find the target objdump
configure:14793: result: just compiled
configure:14812: checking where to find the target ranlib
configure:14835: result: just compiled
configure:14854: checking where to find the target readelf
configure:14877: result: just compiled
configure:14896: checking where to find the target strip
configure:14919: result: just compiled
configure:14938: checking where to find the target windres
configure:14961: result: just compiled
configure:14980: checking where to find the target windmc
configure:15003: result: just compiled
configure:15050: checking whether to enable maintainer-specific
portions of Makefiles
configure:15059: result: no
configure:15294: creating ./config.status
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by config.status, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on noah-tigerlake
config.status:983: creating Makefile
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-pc-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=yes
ac_cv_env_AR_FOR_TARGET_set=
ac_cv_env_AR_FOR_TARGET_value=
ac_cv_env_AR_set=
ac_cv_env_AR_value=
ac_cv_env_AS_FOR_TARGET_set=
ac_cv_env_AS_FOR_TARGET_value=
ac_cv_env_AS_set=
ac_cv_env_AS_value=
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_FOR_TARGET_set=
ac_cv_env_CC_FOR_TARGET_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_FOR_TARGET_set=
ac_cv_env_CXX_FOR_TARGET_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_DLLTOOL_FOR_TARGET_set=
ac_cv_env_DLLTOOL_FOR_TARGET_value=
ac_cv_env_DLLTOOL_set=
ac_cv_env_DLLTOOL_value=
ac_cv_env_GCC_FOR_TARGET_set=
ac_cv_env_GCC_FOR_TARGET_value=
ac_cv_env_GFORTRAN_FOR_TARGET_set=
ac_cv_env_GFORTRAN_FOR_TARGET_value=
ac_cv_env_GOC_FOR_TARGET_set=
ac_cv_env_GOC_FOR_TARGET_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LD_FOR_TARGET_set=
ac_cv_env_LD_FOR_TARGET_value=
ac_cv_env_LD_set=
ac_cv_env_LD_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_LIPO_FOR_TARGET_set=
ac_cv_env_LIPO_FOR_TARGET_value=
ac_cv_env_LIPO_set=
ac_cv_env_LIPO_value=
ac_cv_env_NM_FOR_TARGET_set=
ac_cv_env_NM_FOR_TARGET_value=
ac_cv_env_NM_set=
ac_cv_env_NM_value=
ac_cv_env_OBJCOPY_FOR_TARGET_set=
ac_cv_env_OBJCOPY_FOR_TARGET_value=
ac_cv_env_OBJCOPY_set=
ac_cv_env_OBJCOPY_value=
ac_cv_env_OBJDUMP_FOR_TARGET_set=
ac_cv_env_OBJDUMP_FOR_TARGET_value=
ac_cv_env_OBJDUMP_set=
ac_cv_env_OBJDUMP_value=
ac_cv_env_RANLIB_FOR_TARGET_set=
ac_cv_env_RANLIB_FOR_TARGET_value=
ac_cv_env_RANLIB_set=
ac_cv_env_RANLIB_value=
ac_cv_env_READELF_FOR_TARGET_set=
ac_cv_env_READELF_FOR_TARGET_value=
ac_cv_env_READELF_set=
ac_cv_env_READELF_value=
ac_cv_env_STRIP_FOR_TARGET_set=
ac_cv_env_STRIP_FOR_TARGET_value=
ac_cv_env_STRIP_set=
ac_cv_env_STRIP_value=
ac_cv_env_WINDMC_FOR_TARGET_set=
ac_cv_env_WINDMC_FOR_TARGET_value=
ac_cv_env_WINDMC_set=
ac_cv_env_WINDMC_value=
ac_cv_env_WINDRES_FOR_TARGET_set=
ac_cv_env_WINDRES_FOR_TARGET_value=
ac_cv_env_WINDRES_set=
ac_cv_env_WINDRES_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=x86_64-pc-linux-gnu
ac_cv_env_build_configargs_set=
ac_cv_env_build_configargs_value=
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=x86_64-pc-linux-gnu
ac_cv_env_host_configargs_set=
ac_cv_env_host_configargs_value=
ac_cv_env_target_alias_set=set
ac_cv_env_target_alias_value=x86_64-glibc-linux-gnu
ac_cv_env_target_configargs_set=
ac_cv_env_target_configargs_value=
ac_cv_host=x86_64-pc-linux-gnu
ac_cv_objext=o
ac_cv_path_SED=/usr/bin/sed
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AR=ar
ac_cv_prog_AS=as
ac_cv_prog_AWK=gawk
ac_cv_prog_BISON=bison
ac_cv_prog_FLEX=flex
ac_cv_prog_LD=ld
ac_cv_prog_LEX=flex
ac_cv_prog_M4=m4
ac_cv_prog_MAKEINFO=makeinfo
ac_cv_prog_NM=nm
ac_cv_prog_OBJCOPY=objcopy
ac_cv_prog_OBJDUMP=objdump
ac_cv_prog_RANLIB=ranlib
ac_cv_prog_READELF=readelf
ac_cv_prog_STRIP=strip
ac_cv_prog_YACC='bison -y'
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_CXX=g++
ac_cv_prog_cc_c89=
ac_cv_prog_cc_c99=
ac_cv_prog_cc_g=yes
ac_cv_prog_cxx_g=yes
ac_cv_target=x86_64-glibc-linux-gnu
acx_cv_cc_gcc_supports_ada=no
acx_cv_prog_LN=ln
gcc_cv_isl=no
gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
gcc_cv_tool_dirs=
gcc_cv_tool_prefix=/some/were/build-many/install/compilers/x86_64-linux-gnu
lt_cv_objdir=.libs
## ----------------- ##
## Output variables. ##
## ----------------- ##
AR='ar'
AR_FOR_BUILD='$(AR)'
AR_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ar'
AR_PLUGIN_OPTION='--plugin /usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so'
AS='as'
AS_FOR_BUILD='$(AS)'
AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gas/as-new'
AWK='gawk'
BISON='bison'
BUILD_CONFIG=''
CC='gcc'
CC_FOR_BUILD='$(CC)'
CC_FOR_TARGET='x86_64-glibc-linux-gnu-cc'
CFLAGS='-g -O2'
CFLAGS_FOR_BUILD='-g -O2'
CFLAGS_FOR_TARGET='-g -O2'
COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)'
COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)'
COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)'
CONFIGURE_GDB_TK=''
CPPFLAGS=''
CXX='g++'
CXXFLAGS='-g -O2'
CXXFLAGS_FOR_BUILD='-g -O2'
CXXFLAGS_FOR_TARGET='-g -O2'
CXX_FOR_BUILD='$(CXX)'
CXX_FOR_TARGET='x86_64-glibc-linux-gnu-c++'
DEBUG_PREFIX_CFLAGS_FOR_TARGET=''
DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\"
-DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\"
-DPACKAGE_URL=\"\" -DLT_OBJDIR=\".libs/\"'
DLLTOOL='dlltool'
DLLTOOL_FOR_BUILD='$(DLLTOOL)'
DLLTOOL_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/dlltool'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EXEEXT=''
EXPECT='expect'
FLAGS_FOR_TARGET=' -L$$r/$(HOST_SUBDIR)/ld'
FLEX='flex'
GCC_FOR_TARGET='x86_64-glibc-linux-gnu-gcc'
GCC_SHLIB_SUBDIR=''
GDB_TK=''
GFORTRAN_FOR_BUILD='$(GFORTRAN)'
GFORTRAN_FOR_TARGET='x86_64-glibc-linux-gnu-gfortran'
GNATBIND='no'
GNATMAKE='no'
GOC_FOR_BUILD='$(GOC)'
GOC_FOR_TARGET='x86_64-glibc-linux-gnu-gccgo'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_GDB_TK=''
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
LD='ld'
LDFLAGS=''
LDFLAGS_FOR_BUILD=''
LDFLAGS_FOR_TARGET=''
LD_FOR_BUILD='$(LD)'
LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/ld/ld-new'
LEX='flex'
LIBOBJS=''
LIBS=''
LIPO='lipo'
LIPO_FOR_TARGET='x86_64-glibc-linux-gnu-lipo'
LN='ln'
LN_S='ln -s'
LTLIBOBJS=''
M4='m4'
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='makeinfo'
NM='nm'
NM_FOR_BUILD='$(NM)'
NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/nm-new'
OBJCOPY='objcopy'
OBJCOPY_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objcopy'
OBJDUMP='objdump'
OBJDUMP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objdump'
OBJEXT='o'
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_URL=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PGO_BUILD_GEN_CFLAGS=''
PGO_BUILD_LTO_CFLAGS=''
PGO_BUILD_USE_CFLAGS=''
RANLIB='ranlib'
RANLIB_FOR_BUILD='$(RANLIB)'
RANLIB_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ranlib'
RANLIB_PLUGIN_OPTION='--plugin
/usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so'
RAW_CXX_FOR_TARGET='x86_64-glibc-linux-gnu-c++'
READELF='readelf'
READELF_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/readelf'
RPATH_ENVVAR='LD_LIBRARY_PATH'
RUNTEST='runtest'
SED='/usr/bin/sed'
SHELL='/bin/bash'
STRIP='strip'
STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip-new'
SYSROOT_CFLAGS_FOR_TARGET=''
TOPLEVEL_CONFIGURE_ARGUMENTS='/some/were/build-many/src/binutils/configure
--prefix=/some/were/build-many/install/compilers/x86_64-linux-gnu
--build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu
--target=x86_64-glibc-linux-gnu
--with-sysroot=/some/were/build-many/install/compilers/x86_64-linux-gnu/sysroot
--disable-gdb --disable-gdbserver --disable-libdecnumber
--disable-readline --disable-sim'
WINDMC='windmc'
WINDMC_FOR_BUILD='$(WINDMC)'
WINDMC_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/windmc'
WINDRES='windres'
WINDRES_FOR_BUILD='$(WINDRES)'
WINDRES_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/windres'
YACC='bison -y'
ac_ct_CC='gcc'
ac_ct_CXX='g++'
bindir='${exec_prefix}/bin'
build='x86_64-pc-linux-gnu'
build_alias='x86_64-pc-linux-gnu'
build_configargs=' --cache-file=./config.cache
'\''--prefix=/some/were/build-many/install/compilers/x86_64-linux-gnu'\''
'\''--with-sysroot=/some/were/build-many/install/compilers/x86_64-linux-gnu/sysroot'\''
'\''--disable-gdb'\'' '\''--disable-gdbserver'\''
'\''--disable-libdecnumber'\'' '\''--disable-readline'\''
'\''--disable-sim'\''
--program-transform-name='\''s&^&x86_64-glibc-linux-gnu-&'\''
--disable-option-checking'
build_configdirs=' libiberty'
build_cpu='x86_64'
build_libsubdir='build-x86_64-pc-linux-gnu'
build_noncanonical='x86_64-pc-linux-gnu'
build_os='linux-gnu'
build_subdir='build-x86_64-pc-linux-gnu'
build_tooldir='${exec_prefix}/x86_64-glibc-linux-gnu'
build_vendor='pc'
compare_exclusions='gcc/cc*-checksum$(objext) | gcc/ada/*tools/*'
configdirs=' intl libiberty opcodes bfd zlib libctf binutils gas ld gprof etc'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
do_compare='cmp --ignore-initial=16 $$f1 $$f2'
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='${prefix}'
extra_host_libiberty_configure_flags=''
extra_host_zlib_configure_flags=''
extra_isl_gmp_configure_flags=''
extra_liboffloadmic_configure_flags=''
extra_linker_plugin_configure_flags=''
extra_linker_plugin_flags=''
extra_mpc_gmp_configure_flags=''
extra_mpc_mpfr_configure_flags=''
extra_mpfr_configure_flags=''
get_gcc_base_ver='cat'
gmpinc=''
gmplibs='-lmpc -lmpfr -lgmp'
host='x86_64-pc-linux-gnu'
host_alias='x86_64-pc-linux-gnu'
host_configargs=' --cache-file=./config.cache --with-gnu-as
--with-gnu-ld '\''--prefix=/some/were/build-many/install/compilers/x86_64-linux-gnu'\''
'\''--with-sysroot=/some/were/build-many/install/compilers/x86_64-linux-gnu/sysroot'\''
'\''--disable-gdb'\'' '\''--disable-gdbserver'\''
'\''--disable-libdecnumber'\'' '\''--disable-readline'\''
'\''--disable-sim'\''
--program-transform-name='\''s&^&x86_64-glibc-linux-gnu-&'\''
--disable-option-checking'
host_cpu='x86_64'
host_noncanonical='x86_64-pc-linux-gnu'
host_os='linux-gnu'
host_shared='no'
host_subdir='.'
host_vendor='pc'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
islinc=''
isllibs=''
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
poststage1_ldflags='-static-libstdc++ -static-libgcc'
poststage1_libs=''
prefix='/some/were/build-many/install/compilers/x86_64-linux-gnu'
program_transform_name='s&^&x86_64-glibc-linux-gnu-&'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
stage1_cflags='-g'
stage1_checking='--enable-checking=yes,types'
stage1_languages=',c,'
stage1_ldflags=''
stage1_libs=''
stage2_werror_flag=''
sysconfdir='${prefix}/etc'
target='x86_64-glibc-linux-gnu'
target_alias='x86_64-glibc-linux-gnu'
target_configargs='--cache-file=./config.cache --enable-multilib
--with-cross-host=x86_64-pc-linux-gnu
'\''--prefix=/some/were/build-many/install/compilers/x86_64-linux-gnu'\''
'\''--with-sysroot=/some/were/build-many/install/compilers/x86_64-linux-gnu/sysroot'\''
'\''--disable-gdb'\'' '\''--disable-gdbserver'\''
'\''--disable-libdecnumber'\'' '\''--disable-readline'\''
'\''--disable-sim'\''
--program-transform-name='\''s&^&x86_64-glibc-linux-gnu-&'\''
--disable-option-checking'
target_configdirs=''
target_cpu='x86_64'
target_noncanonical='x86_64-glibc-linux-gnu'
target_os='linux-gnu'
target_subdir='x86_64-glibc-linux-gnu'
target_vendor='glibc'
tooldir='${exec_prefix}/x86_64-glibc-linux-gnu'
## ------------------- ##
## File substitutions. ##
## ------------------- ##
alphaieee_frag='/dev/null'
host_makefile_frag='/dev/null'
ospace_frag='/dev/null'
serialization_dependencies='serdep.tmp'
target_makefile_frag='/some/were/build-many/src/binutils/config/mt-gnu'
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
#define PACKAGE_URL ""
#define LT_OBJDIR ".libs/"
configure: exit 0
```
>
> Thanks,
> Florian
>
* Noah Goldstein:
> On Mon, Sep 27, 2021 at 12:56 PM Florian Weimer <fweimer@redhat.com> wrote:
>>
>> * Noah Goldstein:
>>
>> > $> cat
>> > build-many/logs/compilers/x86_64-linux-gnu/003-compilers-x86_64-linux-gnu-binutils-configure-log.txt
>>
>> There should be a config.log file in the binutils build directory (under
>> build-many/build/compilers). I hope this file contains illuminating
>> data.
>
> Oh sorry. Here is the output of config.log
>
> ```
> $> cat build-many/build/compilers/x86_64-linux-gnu/binutils/config.log
Hmm, is there a binutils/gas/config.log as well?
Thanks,
Florian
On Mon, Sep 27, 2021 at 1:11 PM Florian Weimer <fweimer@redhat.com> wrote:
>
> * Noah Goldstein:
>
> > On Mon, Sep 27, 2021 at 12:56 PM Florian Weimer <fweimer@redhat.com> wrote:
> >>
> >> * Noah Goldstein:
> >>
> >> > $> cat
> >> > build-many/logs/compilers/x86_64-linux-gnu/003-compilers-x86_64-linux-gnu-binutils-configure-log.txt
> >>
> >> There should be a config.log file in the binutils build directory (under
> >> build-many/build/compilers). I hope this file contains illuminating
> >> data.
> >
> > Oh sorry. Here is the output of config.log
> >
> > ```
> > $> cat build-many/build/compilers/x86_64-linux-gnu/binutils/config.log
>
> Hmm, is there a binutils/gas/config.log as well?
Here is the dump. Thanks for the help!
```
$> cat build-many/build/compilers/x86_64-linux-gnu/binutils/gas/config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by gas configure 2.37, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ /some/were/build-many/src/binutils/gas/configure
--srcdir=/some/were/build-many/src/binutils/gas
--cache-file=./config.cache --with-gnu-as --with-gnu-ld
--prefix=/some/were/build-many/install/compilers/x86_64-linux-gnu
--with-sysroot=/some/were/build-many/install/compilers/x86_64-linux-gnu/sysroot
--disable-gdb --disable-gdbserver --disable-libdecnumber
--disable-readline --disable-sim
--program-transform-name=s&^&x86_64-glibc-linux-gnu-&
--disable-option-checking --build=x86_64-pc-linux-gnu
--host=x86_64-pc-linux-gnu --target=x86_64-glibc-linux-gnu
## --------- ##
## Platform. ##
## --------- ##
hostname = noah-tigerlake
uname -m = x86_64
uname -r = 5.11.0-27-generic
uname -s = Linux
uname -v = #29~20.04.1-Ubuntu SMP Wed Aug 11 15:58:17 UTC 2021
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /some/were/build-many/install/compilers/x86_64-linux-gnu/bin
PATH: /home/noah/programs/libraries/
PATH: /home/noah/.local/bin
PATH: /home/noah/programs/pyscripts
PATH: /home/noah/scripts
PATH: /home/noah/programs/libraries/
PATH: /home/noah/.local/bin
PATH: /home/noah/programs/pyscripts
PATH: /home/noah/scripts
PATH: /home/noah/.local/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2261: creating cache ./config.cache
configure:2372: checking build system type
configure:2386: result: x86_64-pc-linux-gnu
configure:2406: checking host system type
configure:2419: result: x86_64-pc-linux-gnu
configure:2439: checking target system type
configure:2452: result: x86_64-glibc-linux-gnu
configure:2495: checking for a BSD-compatible install
configure:2563: result: /usr/bin/install -c
configure:2574: checking whether build environment is sane
configure:2629: result: yes
configure:2778: checking for a thread-safe mkdir -p
configure:2817: result: /usr/bin/mkdir -p
configure:2824: checking for gawk
configure:2851: result: gawk
configure:2862: checking whether make sets $(MAKE)
configure:2884: result: yes
configure:2913: checking whether make supports nested variables
configure:2930: result: yes
configure:3065: checking for x86_64-pc-linux-gnu-gcc
configure:3092: result: gcc
configure:3361: checking for C compiler version
configure:3370: gcc --version >&5
gcc (Ubuntu 11.1.0-1ubuntu1~20.04) 11.1.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3381: $? = 0
configure:3370: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu
11.1.0-1ubuntu1~20.04'
--with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs
--enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2
--prefix=/usr --with-gcc-major-version-only --program-suffix=-11
--program-prefix=x86_64-linux-gnu- --enable-shared
--enable-linker-build-id --libexecdir=/usr/lib
--without-included-gettext --enable-threads=posix --libdir=/usr/lib
--enable-nls --enable-bootstrap --enable-clocale=gnu
--enable-libstdcxx-debug --enable-libstdcxx-time=yes
--with-default-libstdcxx-abi=new --enable-gnu-unique-object
--disable-vtable-verify --enable-plugin --enable-default-pie
--with-system-zlib --enable-libphobos-checking=release
--with-target-system-zlib=auto --enable-objc-gc=auto
--enable-multiarch --disable-werror --disable-cet --with-arch-32=i686
--with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib
--with-tune=generic
--enable-offload-targets=nvptx-none=/build/gcc-11-2V7zgg/gcc-11-11.1.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-2V7zgg/gcc-11-11.1.0/debian/tmp-gcn/usr
--without-cuda-driver --enable-checking=release
--build=x86_64-linux-gnu --host=x86_64-linux-gnu
--target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean
--enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.1.0 (Ubuntu 11.1.0-1ubuntu1~20.04)
... rest of stderr output deleted ...
configure:3381: $? = 0
configure:3370: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3381: $? = 1
configure:3370: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean
'--version'?
gcc: fatal error: no input files
compilation terminated.
configure:3381: $? = 1
configure:3401: checking whether the C compiler works
configure:3423: gcc -g -O2 conftest.c >&5
configure:3427: $? = 0
configure:3475: result: yes
configure:3478: checking for C compiler default output file name
configure:3480: result: a.out
configure:3486: checking for suffix of executables
configure:3493: gcc -o conftest -g -O2 conftest.c >&5
configure:3497: $? = 0
configure:3519: result:
configure:3541: checking whether we are cross compiling
configure:3549: gcc -o conftest -g -O2 conftest.c >&5
configure:3553: $? = 0
configure:3560: ./conftest
configure:3564: $? = 0
configure:3552: result: no
configure:3557: checking for suffix of object files
configure:3579: gcc -c -g -O2 conftest.c >&5
configure:3583: $? = 0
configure:3604: result: o
configure:3608: checking whether we are using the GNU C compiler
configure:3627: gcc -c -g -O2 conftest.c >&5
configure:3627: $? = 0
configure:3636: result: yes
configure:3645: checking whether gcc accepts -g
configure:3665: gcc -c -g conftest.c >&5
configure:3665: $? = 0
configure:3706: result: yes
configure:3723: checking for gcc option to accept ISO C89
configure:3786: gcc -c -g -O2 conftest.c >&5
configure:3786: $? = 0
configure:3799: result: none needed
configure:3824: checking whether gcc understands -c and -o together
configure:3846: gcc -c conftest.c -o conftest2.o
configure:3849: $? = 0
configure:3846: gcc -c conftest.c -o conftest2.o
configure:3849: $? = 0
configure:3861: result: yes
configure:3889: checking for style of include used by make
configure:3917: result: GNU
configure:3943: checking dependency style of gcc
configure:4054: result: gcc3
configure:4075: checking how to run the C preprocessor
configure:4106: gcc -E conftest.c
configure:4106: $? = 0
configure:4120: gcc -E conftest.c
conftest.c:11:10: fatal error: ac_nonexistent.h: No such file or directory
11 | #include <ac_nonexistent.h>
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
configure:4120: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gas"
| #define PACKAGE_TARNAME "gas"
| #define PACKAGE_VERSION "2.37"
| #define PACKAGE_STRING "gas 2.37"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "gas"
| #define VERSION "2.37"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:4145: result: gcc -E
configure:4165: gcc -E conftest.c
configure:4165: $? = 0
configure:4179: gcc -E conftest.c
conftest.c:11:10: fatal error: ac_nonexistent.h: No such file or directory
11 | #include <ac_nonexistent.h>
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
configure:4179: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gas"
| #define PACKAGE_TARNAME "gas"
| #define PACKAGE_VERSION "2.37"
| #define PACKAGE_STRING "gas 2.37"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "gas"
| #define VERSION "2.37"
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:4208: checking for grep that handles long lines and -e
configure:4266: result: /usr/bin/grep
configure:4271: checking for egrep
configure:4333: result: /usr/bin/grep -E
configure:4338: checking for ANSI C header files
configure:4358: gcc -c -g -O2 conftest.c >&5
configure:4358: $? = 0
configure:4431: gcc -o conftest -g -O2 conftest.c >&5
configure:4431: $? = 0
configure:4431: ./conftest
configure:4431: $? = 0
configure:4442: result: yes
configure:4455: checking for sys/types.h
configure:4455: gcc -c -g -O2 conftest.c >&5
configure:4455: $? = 0
configure:4455: result: yes
configure:4455: checking for sys/stat.h
configure:4455: gcc -c -g -O2 conftest.c >&5
configure:4455: $? = 0
configure:4455: result: yes
configure:4455: checking for stdlib.h
configure:4455: gcc -c -g -O2 conftest.c >&5
configure:4455: $? = 0
configure:4455: result: yes
configure:4455: checking for string.h
configure:4455: gcc -c -g -O2 conftest.c >&5
configure:4455: $? = 0
configure:4455: result: yes
configure:4455: checking for memory.h
configure:4455: gcc -c -g -O2 conftest.c >&5
configure:4455: $? = 0
configure:4455: result: yes
configure:4455: checking for strings.h
configure:4455: gcc -c -g -O2 conftest.c >&5
configure:4455: $? = 0
configure:4455: result: yes
configure:4455: checking for inttypes.h
configure:4455: gcc -c -g -O2 conftest.c >&5
configure:4455: $? = 0
configure:4455: result: yes
configure:4455: checking for stdint.h
configure:4455: gcc -c -g -O2 conftest.c >&5
configure:4455: $? = 0
configure:4455: result: yes
configure:4455: checking for unistd.h
configure:4455: gcc -c -g -O2 conftest.c >&5
configure:4455: $? = 0
configure:4455: result: yes
configure:4468: checking minix/config.h usability
configure:4468: gcc -c -g -O2 conftest.c >&5
conftest.c:54:10: fatal error: minix/config.h: No such file or directory
54 | #include <minix/config.h>
| ^~~~~~~~~~~~~~~~
compilation terminated.
configure:4468: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gas"
| #define PACKAGE_TARNAME "gas"
| #define PACKAGE_VERSION "2.37"
| #define PACKAGE_STRING "gas 2.37"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "gas"
| #define VERSION "2.37"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h. */
| #include <stdio.h>
| #ifdef HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #ifdef STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # ifdef HAVE_STDLIB_H
| # include <stdlib.h>
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include <memory.h>
| # endif
| # include <string.h>
| #endif
| #ifdef HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #ifdef HAVE_INTTYPES_H
| # include <inttypes.h>
| #endif
| #ifdef HAVE_STDINT_H
| # include <stdint.h>
| #endif
| #ifdef HAVE_UNISTD_H
| # include <unistd.h>
| #endif
| #include <minix/config.h>
configure:4468: result: no
configure:4468: checking minix/config.h presence
configure:4468: gcc -E conftest.c
conftest.c:21:10: fatal error: minix/config.h: No such file or directory
21 | #include <minix/config.h>
| ^~~~~~~~~~~~~~~~
compilation terminated.
configure:4468: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gas"
| #define PACKAGE_TARNAME "gas"
| #define PACKAGE_VERSION "2.37"
| #define PACKAGE_STRING "gas 2.37"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "gas"
| #define VERSION "2.37"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| /* end confdefs.h. */
| #include <minix/config.h>
configure:4468: result: no
configure:4468: checking for minix/config.h
configure:4468: result: no
configure:4489: checking whether it is safe to define __EXTENSIONS__
configure:4507: gcc -c -g -O2 conftest.c >&5
configure:4507: $? = 0
configure:4514: result: yes
configure:4577: checking how to print strings
configure:4604: result: printf
configure:4625: checking for a sed that does not truncate output
configure:4689: result: /usr/bin/sed
configure:4707: checking for fgrep
configure:4769: result: /usr/bin/grep -F
configure:4804: checking for ld used by gcc
configure:4871: result: ld
configure:4878: checking if the linker (ld) is GNU ld
configure:4893: result: yes
configure:4905: checking for BSD- or MS-compatible name lister (nm)
configure:4954: result: nm
configure:5084: checking the name lister (nm) interface
configure:5091: gcc -c -g -O2 conftest.c >&5
configure:5094: nm "conftest.o"
configure:5097: output
0000000000000000 B some_variable
configure:5098: result: BSD nm
configure:5101: checking whether ln -s works
configure:5105: result: yes
configure:5113: checking the maximum length of command line arguments
configure:5238: result: 1879296
configure:5255: checking whether the shell understands some XSI constructs
configure:5264: result: yes
configure:5268: checking whether the shell understands "+="
configure:5272: result: yes
configure:5307: checking for ld option to reload object files
configure:5314: result: -r
configure:5343: checking for x86_64-pc-linux-gnu-objdump
configure:5370: result: objdump
configure:5442: checking how to recognize dependent libraries
configure:5643: result: pass_all
configure:5676: checking for x86_64-pc-linux-gnu-ar
configure:5703: result: ar --plugin
/usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so
configure:5794: checking for x86_64-pc-linux-gnu-strip
configure:5824: result: no
configure:5834: checking for strip
configure:5850: found /usr/bin/strip
configure:5861: result: strip
configure:5893: checking for x86_64-pc-linux-gnu-ranlib
configure:5920: result: ranlib --plugin
/usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so
configure:6067: checking command to parse nm output from gcc object
configure:6185: gcc -c -g -O2 conftest.c >&5
configure:6188: $? = 0
configure:6192: nm conftest.o \| sed -n -e 's/^.*[
]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2
\2/p' \> conftest.nm
configure:6195: $? = 0
configure:6249: gcc -o conftest -g -O2 conftest.c conftstm.o >&5
configure:6252: $? = 0
configure:6290: result: ok
configure:6385: gcc -c -g -O2 conftest.c >&5
configure:6388: $? = 0
configure:7138: checking for dlfcn.h
configure:7138: gcc -c -g -O2 conftest.c >&5
configure:7138: $? = 0
configure:7138: result: yes
configure:7325: checking for objdir
configure:7340: result: .libs
configure:7611: checking if gcc supports -fno-rtti -fno-exceptions
configure:7629: gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command-line option '-fno-rtti' is valid for
C++/D/ObjC++ but not for C
configure:7633: $? = 0
configure:7646: result: no
configure:7666: checking for gcc option to produce PIC
configure:7952: result: -fPIC -DPIC
configure:7964: checking if gcc PIC flag -fPIC -DPIC works
configure:7982: gcc -c -g -O2 -fPIC -DPIC -DPIC conftest.c >&5
configure:7986: $? = 0
configure:7999: result: yes
configure:8023: checking if gcc static flag -static works
configure:8051: result: yes
configure:8066: checking if gcc supports -c -o file.o
configure:8087: gcc -c -g -O2 -o out/conftest2.o conftest.c >&5
configure:8091: $? = 0
configure:8113: result: yes
configure:8121: checking if gcc supports -c -o file.o
configure:8168: result: yes
configure:8201: checking whether the gcc linker (ld -m elf_x86_64)
supports shared libraries
configure:9272: result: yes
configure:9309: checking whether -lc should be explicitly linked in
configure:9317: gcc -c -g -O2 conftest.c >&5
configure:9320: $? = 0
configure:9335: gcc -shared -fPIC -DPIC conftest.o -v -Wl,-soname
-Wl,conftest -o conftest 2\>\&1 \| /usr/bin/grep -lc \>/dev/null
2\>\&1
configure:9338: $? = 0
configure:9352: result: no
configure:9517: checking dynamic linker characteristics
configure:9958: gcc -o conftest -g -O2 -Wl,-rpath -Wl,/foo
conftest.c >&5
configure:9958: $? = 0
configure:10180: result: GNU/Linux ld.so
configure:10287: checking how to hardcode library paths into programs
configure:10312: result: immediate
configure:10852: checking whether stripping libraries is possible
configure:10857: result: yes
configure:10892: checking if libtool supports shared libraries
configure:10894: result: yes
configure:10897: checking whether to build shared libraries
configure:10918: result: yes
configure:10921: checking whether to build static libraries
configure:10925: result: yes
configure:8130: checking for dlfcn.h
configure:8130: result: yes
configure:8143: checking for windows.h
configure:8143: gcc -c -g -O2 conftest.c >&5
conftest.c:63:10: fatal error: windows.h: No such file or directory
63 | #include <windows.h>
| ^~~~~~~~~~~
compilation terminated.
configure:8143: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gas"
| #define PACKAGE_TARNAME "gas"
| #define PACKAGE_VERSION "2.37"
| #define PACKAGE_STRING "gas 2.37"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "gas"
| #define VERSION "2.37"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define __EXTENSIONS__ 1
| #define _ALL_SOURCE 1
| #define _GNU_SOURCE 1
| #define _POSIX_PTHREAD_SEMANTICS 1
| #define _TANDEM_SOURCE 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
| #include <stdio.h>
| #ifdef HAVE_SYS_TYPES_H
| # include <sys/types.h>
| #endif
| #ifdef HAVE_SYS_STAT_H
| # include <sys/stat.h>
| #endif
| #ifdef STDC_HEADERS
| # include <stdlib.h>
| # include <stddef.h>
| #else
| # ifdef HAVE_STDLIB_H
| # include <stdlib.h>
| # endif
| #endif
| #ifdef HAVE_STRING_H
| # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| # include <memory.h>
| # endif
| # include <string.h>
| #endif
| #ifdef HAVE_STRINGS_H
| # include <strings.h>
| #endif
| #ifdef HAVE_INTTYPES_H
| # include <inttypes.h>
| #endif
| #ifdef HAVE_STDINT_H
| # include <stdint.h>
| #endif
| #ifdef HAVE_UNISTD_H
| # include <unistd.h>
| #endif
|
| #include <windows.h>
configure:8143: result: no
configure:8170: checking for library containing dlsym
configure:8201: gcc -o conftest -g -O2 conftest.c >&5
/usr/bin/ld: /tmp/ccdjFoMs.o: in function `main':
/some/were/build-many/build/compilers/x86_64-linux-gnu/binutils/gas/conftest.c:40:
undefined reference to `dlsym'
collect2: error: ld returned 1 exit status
configure:8201: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gas"
| #define PACKAGE_TARNAME "gas"
| #define PACKAGE_VERSION "2.37"
| #define PACKAGE_STRING "gas 2.37"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "gas"
| #define VERSION "2.37"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define __EXTENSIONS__ 1
| #define _ALL_SOURCE 1
| #define _GNU_SOURCE 1
| #define _POSIX_PTHREAD_SEMANTICS 1
| #define _TANDEM_SOURCE 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define HAVE_DLFCN_H 1
| /* end confdefs.h. */
|
| /* Override any GCC internal prototype to avoid an error.
| Use char because int might match the return type of a GCC
| builtin and then its argument prototype would still apply. */
| #ifdef __cplusplus
| extern "C"
| #endif
| char dlsym ();
| int
| main ()
| {
| return dlsym ();
| ;
| return 0;
| }
configure:8201: gcc -o conftest -g -O2 conftest.c -ldl >&5
configure:8201: $? = 0
configure:8218: result: -ldl
configure:8290: checking for special C compiler options needed for large files
configure:8335: result: no
configure:8341: checking for _FILE_OFFSET_BITS value needed for large files
configure:8366: gcc -c -g -O2 conftest.c >&5
configure:8366: $? = 0
configure:8398: result: no
configure:8484: checking how to compare bootstrapped objects
configure:8509: result: cmp --ignore-initial=16 $$f1 $$f2
configure:8814: checking whether byte ordering is bigendian
configure:8829: gcc -c -g -O2 conftest.c >&5
conftest.c:31:16: error: unknown type name 'not'
31 | not a universal capable compiler
| ^~~
conftest.c:31:22: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'universal'
31 | not a universal capable compiler
| ^~~~~~~~~
conftest.c:31:22: error: unknown type name 'universal'
configure:8829: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gas"
| #define PACKAGE_TARNAME "gas"
| #define PACKAGE_VERSION "2.37"
| #define PACKAGE_STRING "gas 2.37"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "gas"
| #define VERSION "2.37"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define __EXTENSIONS__ 1
| #define _ALL_SOURCE 1
| #define _GNU_SOURCE 1
| #define _POSIX_PTHREAD_SEMANTICS 1
| #define _TANDEM_SOURCE 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define HAVE_DLFCN_H 1
| #define ENABLE_CHECKING 1
| /* end confdefs.h. */
| #ifndef __APPLE_CC__
| not a universal capable compiler
| #endif
| typedef int dummy;
|
configure:8874: gcc -c -g -O2 conftest.c >&5
configure:8874: $? = 0
configure:8892: gcc -c -g -O2 conftest.c >&5
conftest.c: In function 'main':
conftest.c:37:18: error: unknown type name 'not'; did you mean 'ino_t'?
37 | not big endian
| ^~~
| ino_t
conftest.c:37:26: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'endian'
37 | not big endian
| ^~~~~~
configure:8892: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gas"
| #define PACKAGE_TARNAME "gas"
| #define PACKAGE_VERSION "2.37"
| #define PACKAGE_STRING "gas 2.37"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "gas"
| #define VERSION "2.37"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define __EXTENSIONS__ 1
| #define _ALL_SOURCE 1
| #define _GNU_SOURCE 1
| #define _POSIX_PTHREAD_SEMANTICS 1
| #define _TANDEM_SOURCE 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define HAVE_DLFCN_H 1
| #define ENABLE_CHECKING 1
| /* end confdefs.h. */
| #include <sys/types.h>
| #include <sys/param.h>
|
| int
| main ()
| {
| #if BYTE_ORDER != BIG_ENDIAN
| not big endian
| #endif
|
| ;
| return 0;
| }
configure:9020: result: no
configure:9959: checking for bison
configure:9986: result: bison -y
configure:10002: checking for flex
configure:10029: result: flex
configure:10068: flex conftest.l
configure:10072: $? = 0
configure:10074: checking lex output file root
configure:10088: result: lex.yy
configure:10093: checking lex library
configure:10107: gcc -o conftest -g -O2 conftest.c -ldl >&5
/usr/bin/ld: /tmp/cc2Y69vh.o: in function `input':
/some/were/build-many/build/compilers/x86_64-linux-gnu/binutils/gas/lex.yy.c:1180:
undefined reference to `yywrap'
/usr/bin/ld: /tmp/cc2Y69vh.o: in function `yylex':
/some/were/build-many/build/compilers/x86_64-linux-gnu/binutils/gas/lex.yy.c:871:
undefined reference to `yywrap'
/usr/bin/ld: /tmp/cc2Y69vh.o: in function `main':
/some/were/build-many/build/compilers/x86_64-linux-gnu/binutils/gas/conftest.l:17:
undefined reference to `yywrap'
collect2: error: ld returned 1 exit status
configure:10107: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "gas"
| #define PACKAGE_TARNAME "gas"
| #define PACKAGE_VERSION "2.37"
| #define PACKAGE_STRING "gas 2.37"
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define PACKAGE "gas"
| #define VERSION "2.37"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define __EXTENSIONS__ 1
| #define _ALL_SOURCE 1
| #define _GNU_SOURCE 1
| #define _POSIX_PTHREAD_SEMANTICS 1
| #define _TANDEM_SOURCE 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define HAVE_DLFCN_H 1
| #define ENABLE_CHECKING 1
| #define DEFAULT_ARCH "x86_64"
| #define DEFAULT_GENERATE_X86_RELAX_RELOCATIONS 1
| #define DEFAULT_GENERATE_ELF_STT_COMMON 0
| #define DEFAULT_GENERATE_BUILD_NOTES 0
| #define DEFAULT_X86_USED_NOTE 1
| #define DEFAULT_RISCV_ATTR 0
| #define DEFAULT_MIPS_FIX_LOONGSON3_LLSC 0
| #define DEFAULT_FLAG_COMPRESS_DEBUG 1
| #define EMULATIONS &i386elf,
| #define DEFAULT_EMULATION "i386elf"
| #define TARGET_ALIAS "x86_64-glibc-linux-gnu"
| #define TARGET_CANONICAL "x86_64-glibc-linux-gnu"
| #define TARGET_CPU "x86_64"
| #define TARGET_VENDOR "glibc"
| #define TARGET_OS "linux-gnu"
| /* end confdefs.h. */
|
| #line 3 "lex.yy.c"
|
| #define YY_INT_ALIGNED short int
|
| /* A lexical scanner generated by flex */
|
| #define FLEX_SCANNER
| #define YY_FLEX_MAJOR_VERSION 2
| #define YY_FLEX_MINOR_VERSION 6
| #define YY_FLEX_SUBMINOR_VERSION 4
| #if YY_FLEX_SUBMINOR_VERSION > 0
| #define FLEX_BETA
| #endif
|
| /* First, we deal with platform-specific or compiler-specific issues. */
|
| /* begin standard C headers. */
| #include <stdio.h>
| #include <string.h>
| #include <errno.h>
| #include <stdlib.h>
|
| /* end standard C headers. */
|
| /* flex integer type definitions */
|
| #ifndef FLEXINT_H
| #define FLEXINT_H
|
| /* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
|
| #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
|
| /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
| * if you want the limit (max/min) macros for int types.
| */
| #ifndef __STDC_LIMIT_MACROS
| #define __STDC_LIMIT_MACROS 1
| #endif
|
| #include <inttypes.h>
| typedef int8_t flex_int8_t;
| typedef uint8_t flex_uint8_t;
| typedef int16_t flex_int16_t;
| typedef uint16_t flex_uint16_t;
| typedef int32_t flex_int32_t;
| typedef uint32_t flex_uint32_t;
| #else
| typedef signed char flex_int8_t;
| typedef short int flex_int16_t;
| typedef int flex_int32_t;
| typedef unsigned char flex_uint8_t;
| typedef unsigned short int flex_uint16_t;
| typedef unsigned int flex_uint32_t;
|
| /* Limits of integral types. */
| #ifndef INT8_MIN
| #define INT8_MIN (-128)
| #endif
| #ifndef INT16_MIN
| #define INT16_MIN (-32767-1)
| #endif
| #ifndef INT32_MIN
| #define INT32_MIN (-2147483647-1)
| #endif
| #ifndef INT8_MAX
| #define INT8_MAX (127)
| #endif
| #ifndef INT16_MAX
| #define INT16_MAX (32767)
| #endif
| #ifndef INT32_MAX
| #define INT32_MAX (2147483647)
| #endif
| #ifndef UINT8_MAX
| #define UINT8_MAX (255U)
| #endif
| #ifndef UINT16_MAX
| #define UINT16_MAX (65535U)
| #endif
| #ifndef UINT32_MAX
| #define UINT32_MAX (4294967295U)
| #endif
|
| #ifndef SIZE_MAX
| #define SIZE_MAX (~(size_t)0)
| #endif
|
| #endif /* ! C99 */
|
| #endif /* ! FLEXINT_H */
|
| /* begin standard C++ headers. */
|
| /* TODO: this is always defined, so inline it */
| #define yyconst const
|
| #if defined(__GNUC__) && __GNUC__ >= 3
| #define yynoreturn __attribute__((__noreturn__))
| #else
| #define yynoreturn
| #endif
|
| /* Returned upon end-of-file. */
| #define YY_NULL 0
|
| /* Promotes a possibly negative, possibly signed char to an
| * integer in range [0..255] for use as an array index.
| */
| #define YY_SC_TO_UI(c) ((YY_CHAR) (c))
|
| /* Enter a start condition. This macro really ought to take a parameter,
| * but we do it the disgusting crufty way forced on us by the ()-less
| * definition of BEGIN.
| */
| #define BEGIN (yy_start) = 1 + 2 *
| /* Translate the current start state into a value that can be later handed
| * to BEGIN to return to the state. The YYSTATE alias is for lex
| * compatibility.
| */
| #define YY_START (((yy_start) - 1) / 2)
| #define YYSTATE YY_START
| /* Action number for EOF rule of a given start state. */
| #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
| /* Special action meaning "start processing a new file". */
| #define YY_NEW_FILE yyrestart( yyin )
| #define YY_END_OF_BUFFER_CHAR 0
|
| /* Size of default input buffer. */
| #ifndef YY_BUF_SIZE
| #ifdef __ia64__
| /* On IA-64, the buffer size is 16k, not 8k.
| * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
| * Ditto for the __ia64__ case accordingly.
| */
| #define YY_BUF_SIZE 32768
| #else
| #define YY_BUF_SIZE 16384
| #endif /* __ia64__ */
| #endif
|
| /* The state buf must be large enough to hold one state per
character in the main buffer.
| */
| #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
|
| #ifndef YY_TYPEDEF_YY_BUFFER_STATE
| #define YY_TYPEDEF_YY_BUFFER_STATE
| typedef struct yy_buffer_state *YY_BUFFER_STATE;
| #endif
|
| #ifndef YY_TYPEDEF_YY_SIZE_T
| #define YY_TYPEDEF_YY_SIZE_T
| typedef size_t yy_size_t;
| #endif
|
| extern int yyleng;
|
| extern FILE *yyin, *yyout;
|
| #define EOB_ACT_CONTINUE_SCAN 0
| #define EOB_ACT_END_OF_FILE 1
| #define EOB_ACT_LAST_MATCH 2
|
| #define YY_LESS_LINENO(n)
| #define YY_LINENO_REWIND_TO(ptr)
|
| /* Return all but the first "n" matched characters back to the input
stream. */
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| *yy_cp = (yy_hold_char); \
| YY_RESTORE_YY_MORE_OFFSET \
| (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
| YY_DO_BEFORE_ACTION; /* set up yytext again */ \
| } \
| while ( 0 )
| #define unput(c) yyunput( c, (yytext_ptr) )
|
| #ifndef YY_STRUCT_YY_BUFFER_STATE
| #define YY_STRUCT_YY_BUFFER_STATE
| struct yy_buffer_state
| {
| FILE *yy_input_file;
|
| char *yy_ch_buf; /* input buffer */
| char *yy_buf_pos; /* current position in input buffer */
|
| /* Size of input buffer in bytes, not including room for EOB
| * characters.
| */
| int yy_buf_size;
|
| /* Number of characters read into yy_ch_buf, not including EOB
| * characters.
| */
| int yy_n_chars;
|
| /* Whether we "own" the buffer - i.e., we know we created it,
| * and can realloc() it to grow it, and should free() it to
| * delete it.
| */
| int yy_is_our_buffer;
|
| /* Whether this is an "interactive" input source; if so, and
| * if we're using stdio for input, then we want to use getc()
| * instead of fread(), to make sure we stop fetching input after
| * each newline.
| */
| int yy_is_interactive;
|
| /* Whether we're considered to be at the beginning of a line.
| * If so, '^' rules will be active on the next match, otherwise
| * not.
| */
| int yy_at_bol;
|
| int yy_bs_lineno; /**< The line count. */
| int yy_bs_column; /**< The column count. */
|
| /* Whether to try to fill the input buffer when we reach the
| * end of it.
| */
| int yy_fill_buffer;
|
| int yy_buffer_status;
|
| #define YY_BUFFER_NEW 0
| #define YY_BUFFER_NORMAL 1
| /* When an EOF's been seen but there's still some text to process
| * then we mark the buffer as YY_EOF_PENDING, to indicate that we
| * shouldn't try reading from the input source any more. We might
| * still have a bunch of tokens to match, though, because of
| * possible backing-up.
| *
| * When we actually see the EOF, we change the status to "new"
| * (via yyrestart()), so that the user can continue scanning by
| * just pointing yyin at a new input file.
| */
| #define YY_BUFFER_EOF_PENDING 2
|
| };
| #endif /* !YY_STRUCT_YY_BUFFER_STATE */
|
| /* Stack of input buffers. */
| static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
| static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
| static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */
|
| /* We provide macros for accessing buffer states in case in the
| * future we want to put the buffer states in a more general
| * "scanner state".
| *
| * Returns the top of the stack, or NULL.
| */
| #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
| ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
| : NULL)
| /* Same as previous macro, but useful when we know that the buffer
stack is not
| * NULL or when we need an lvalue. For internal use only.
| */
| #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
|
| /* yy_hold_char holds the character lost when yytext is formed. */
| static char yy_hold_char;
| static int yy_n_chars; /* number of characters read into yy_ch_buf */
| int yyleng;
|
| /* Points to current character in buffer. */
| static char *yy_c_buf_p = NULL;
| static int yy_init = 0; /* whether we need to initialize */
| static int yy_start = 0; /* start state number */
|
| /* Flag which is used to allow yywrap()'s to do buffer switches
| * instead of setting up a fresh yyin. A bit of a hack ...
| */
| static int yy_did_buffer_switch_on_eof;
|
| void yyrestart ( FILE *input_file );
| void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer );
| YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size );
| void yy_delete_buffer ( YY_BUFFER_STATE b );
| void yy_flush_buffer ( YY_BUFFER_STATE b );
| void yypush_buffer_state ( YY_BUFFER_STATE new_buffer );
| void yypop_buffer_state ( void );
|
| static void yyensure_buffer_stack ( void );
| static void yy_load_buffer_state ( void );
| static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file );
| #define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER )
|
| YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size );
| YY_BUFFER_STATE yy_scan_string ( const char *yy_str );
| YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len );
|
| void *yyalloc ( yy_size_t );
| void *yyrealloc ( void *, yy_size_t );
| void yyfree ( void * );
|
| #define yy_new_buffer yy_create_buffer
| #define yy_set_interactive(is_interactive) \
| { \
| if ( ! YY_CURRENT_BUFFER ){ \
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer( yyin, YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
| }
| #define yy_set_bol(at_bol) \
| { \
| if ( ! YY_CURRENT_BUFFER ){\
| yyensure_buffer_stack (); \
| YY_CURRENT_BUFFER_LVALUE = \
| yy_create_buffer( yyin, YY_BUF_SIZE ); \
| } \
| YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
| }
| #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
|
| /* Begin user sect3 */
| typedef flex_uint8_t YY_CHAR;
|
| FILE *yyin = NULL, *yyout = NULL;
|
| typedef int yy_state_type;
|
| extern int yylineno;
| int yylineno = 1;
|
| extern char *yytext;
| #ifdef yytext_ptr
| #undef yytext_ptr
| #endif
| #define yytext_ptr yytext
|
| static yy_state_type yy_get_previous_state ( void );
| static yy_state_type yy_try_NUL_trans ( yy_state_type current_state );
| static int yy_get_next_buffer ( void );
| static void yynoreturn yy_fatal_error ( const char* msg );
|
| /* Done after the current pattern has been matched and before the
| * corresponding action - sets up yytext.
| */
| #define YY_DO_BEFORE_ACTION \
| (yytext_ptr) = yy_bp; \
| (yytext_ptr) -= (yy_more_len); \
| yyleng = (int) (yy_cp - (yytext_ptr)); \
| (yy_hold_char) = *yy_cp; \
| *yy_cp = '\0'; \
| (yy_c_buf_p) = yy_cp;
| #define YY_NUM_RULES 8
| #define YY_END_OF_BUFFER 9
| /* This struct is not used in this scanner,
| but its presence is necessary. */
| struct yy_trans_info
| {
| flex_int32_t yy_verify;
| flex_int32_t yy_nxt;
| };
| static const flex_int16_t yy_acclist[23] =
| { 0,
| 9, 7, 8, 8, 1, 7, 8, 2, 7, 8,
| 3, 7, 8, 4, 7, 8, 5, 7, 8, 6,
| 7, 8
| } ;
|
| static const flex_int16_t yy_accept[14] =
| { 0,
| 1, 1, 1, 2, 4, 5, 8, 11, 14, 17,
| 20, 23, 23
| } ;
|
| static const YY_CHAR yy_ec[256] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 3, 4, 5, 6,
|
| 7, 8, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
| 1, 1, 1, 1, 1
| } ;
|
| static const YY_CHAR yy_meta[9] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1
| } ;
|
| static const flex_int16_t yy_base[13] =
| { 0,
| 0, 0, 9, 10, 10, 10, 10, 10, 10, 10,
| 10, 10
| } ;
|
| static const flex_int16_t yy_def[13] =
| { 0,
| 12, 1, 12, 12, 12, 12, 12, 12, 12, 12,
| 12, 0
| } ;
|
| static const flex_int16_t yy_nxt[19] =
| { 0,
| 4, 5, 6, 7, 8, 9, 10, 11, 12, 3,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| static const flex_int16_t yy_chk[19] =
| { 0,
| 1, 1, 1, 1, 1, 1, 1, 1, 3, 12,
| 12, 12, 12, 12, 12, 12, 12, 12
| } ;
|
| extern int yy_flex_debug;
| int yy_flex_debug = 0;
|
| static yy_state_type *yy_state_buf=0, *yy_state_ptr=0;
| static char *yy_full_match;
| static int yy_lp;
| #define REJECT \
| { \
| *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \
| yy_cp = (yy_full_match); /* restore poss. backed-over text */ \
| ++(yy_lp); \
| goto find_rule; \
| }
|
| static int yy_more_flag = 0;
| static int yy_more_len = 0;
| #define yymore() ((yy_more_flag) = 1)
| #define YY_MORE_ADJ (yy_more_len)
| #define YY_RESTORE_YY_MORE_OFFSET
| char *yytext;
| #line 1 "conftest.l"
| #line 460 "lex.yy.c"
|
| #define INITIAL 0
|
| #ifndef YY_NO_UNISTD_H
| /* Special case for "unistd.h", since it is non-ANSI. We include it way
| * down here because we want the user's section 1 to have been scanned first.
| * The user has a chance to override it with an option.
| */
| #include <unistd.h>
| #endif
|
| #ifndef YY_EXTRA_TYPE
| #define YY_EXTRA_TYPE void *
| #endif
|
| static int yy_init_globals ( void );
|
| /* Accessor methods to globals.
| These are made visible to non-reentrant scanners for convenience. */
|
| int yylex_destroy ( void );
|
| int yyget_debug ( void );
|
| void yyset_debug ( int debug_flag );
|
| YY_EXTRA_TYPE yyget_extra ( void );
|
| void yyset_extra ( YY_EXTRA_TYPE user_defined );
|
| FILE *yyget_in ( void );
|
| void yyset_in ( FILE * _in_str );
|
| FILE *yyget_out ( void );
|
| void yyset_out ( FILE * _out_str );
|
| int yyget_leng ( void );
|
| char *yyget_text ( void );
|
| int yyget_lineno ( void );
|
| void yyset_lineno ( int _line_number );
|
| /* Macros after this point can all be overridden by user definitions in
| * section 1.
| */
|
| #ifndef YY_SKIP_YYWRAP
| #ifdef __cplusplus
| extern "C" int yywrap ( void );
| #else
| extern int yywrap ( void );
| #endif
| #endif
|
| #ifndef YY_NO_UNPUT
|
| static void yyunput ( int c, char *buf_ptr );
|
| #endif
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy ( char *, const char *, int );
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen ( const char * );
| #endif
|
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
| static int yyinput ( void );
| #else
| static int input ( void );
| #endif
|
| #endif
|
| /* Amount of stuff to slurp up with each read. */
| #ifndef YY_READ_BUF_SIZE
| #ifdef __ia64__
| /* On IA-64, the buffer size is 16k, not 8k */
| #define YY_READ_BUF_SIZE 16384
| #else
| #define YY_READ_BUF_SIZE 8192
| #endif /* __ia64__ */
| #endif
|
| /* Copy whatever the last rule matched to the standard output. */
| #ifndef ECHO
| /* This used to be an fputs(), but since the string might contain NUL's,
| * we now use fwrite().
| */
| #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout ))
{} } while (0)
| #endif
|
| /* Gets input and stuffs it into "buf". number of characters read,
or YY_NULL,
| * is returned in "result".
| */
| #ifndef YY_INPUT
| #define YY_INPUT(buf,result,max_size) \
| if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
| { \
| int c = '*'; \
| int n; \
| for ( n = 0; n < max_size && \
| (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
| buf[n] = (char) c; \
| if ( c == '\n' ) \
| buf[n++] = (char) c; \
| if ( c == EOF && ferror( yyin ) ) \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| result = n; \
| } \
| else \
| { \
| errno=0; \
| while ( (result = (int) fread(buf, 1, (yy_size_t) max_size, yyin))
== 0 && ferror(yyin)) \
| { \
| if( errno != EINTR) \
| { \
| YY_FATAL_ERROR( "input in flex scanner failed" ); \
| break; \
| } \
| errno=0; \
| clearerr(yyin); \
| } \
| }\
| \
|
| #endif
|
| /* No semi-colon after return; correct usage is to write "yyterminate();" -
| * we don't want an extra ';' after the "return" because that will cause
| * some compilers to complain about unreachable statements.
| */
| #ifndef yyterminate
| #define yyterminate() return YY_NULL
| #endif
|
| /* Number of entries by which start-condition stack grows. */
| #ifndef YY_START_STACK_INCR
| #define YY_START_STACK_INCR 25
| #endif
|
| /* Report a fatal error. */
| #ifndef YY_FATAL_ERROR
| #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
| #endif
|
| /* end tables serialization structures and prototypes */
|
| /* Default declaration of generated scanner - a define so the user can
| * easily add parameters.
| */
| #ifndef YY_DECL
| #define YY_DECL_IS_OURS 1
|
| extern int yylex (void);
|
| #define YY_DECL int yylex (void)
| #endif /* !YY_DECL */
|
| /* Code executed at the beginning of each rule, after yytext and yyleng
| * have been set up.
| */
| #ifndef YY_USER_ACTION
| #define YY_USER_ACTION
| #endif
|
| /* Code executed at the end of each rule. */
| #ifndef YY_BREAK
| #define YY_BREAK /*LINTED*/break;
| #endif
|
| #define YY_RULE_SETUP \
| YY_USER_ACTION
|
| /** The main scanner function which does all the work.
| */
| YY_DECL
| {
| yy_state_type yy_current_state;
| char *yy_cp, *yy_bp;
| int yy_act;
|
| if ( !(yy_init) )
| {
| (yy_init) = 1;
|
| #ifdef YY_USER_INIT
| YY_USER_INIT;
| #endif
|
| /* Create the reject buffer large enough to save one state
per allowed character. */
| if ( ! (yy_state_buf) )
| (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE );
| if ( ! (yy_state_buf) )
| YY_FATAL_ERROR( "out of dynamic memory in yylex()" );
|
| if ( ! (yy_start) )
| (yy_start) = 1; /* first start state */
|
| if ( ! yyin )
| yyin = stdin;
|
| if ( ! yyout )
| yyout = stdout;
|
| if ( ! YY_CURRENT_BUFFER ) {
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer( yyin, YY_BUF_SIZE );
| }
|
| yy_load_buffer_state( );
| }
|
| {
| #line 1 "conftest.l"
|
| #line 685 "lex.yy.c"
|
| while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */
| {
| (yy_more_len) = 0;
| if ( (yy_more_flag) )
| {
| (yy_more_len) = (int) ((yy_c_buf_p) - (yytext_ptr));
| (yy_more_flag) = 0;
| }
| yy_cp = (yy_c_buf_p);
|
| /* Support of yytext. */
| *yy_cp = (yy_hold_char);
|
| /* yy_bp points to the position in yy_ch_buf of the start of
| * the current run.
| */
| yy_bp = yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| yy_match:
| do
| {
| YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ;
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| ++yy_cp;
| }
| while ( yy_base[yy_current_state] != 10 );
|
| yy_find_action:
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
|
| find_rule: /* we branch to this label when backing up */
|
| for ( ; ; ) /* until we find what rule we matched */
| {
| if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] )
| {
| yy_act = yy_acclist[(yy_lp)];
| {
| (yy_full_match) = yy_cp;
| break;
| }
| }
| --yy_cp;
| yy_current_state = *--(yy_state_ptr);
| (yy_lp) = yy_accept[yy_current_state];
| }
|
| YY_DO_BEFORE_ACTION;
|
| do_action: /* This label is used only to access EOF actions. */
|
| switch ( yy_act )
| { /* beginning of action switch */
| case 1:
| YY_RULE_SETUP
| #line 2 "conftest.l"
| { ECHO; }
| YY_BREAK
| case 2:
| YY_RULE_SETUP
| #line 3 "conftest.l"
| { REJECT; }
| YY_BREAK
| case 3:
| YY_RULE_SETUP
| #line 4 "conftest.l"
| { yymore (); }
| YY_BREAK
| case 4:
| YY_RULE_SETUP
| #line 5 "conftest.l"
| { yyless (1); }
| YY_BREAK
| case 5:
| YY_RULE_SETUP
| #line 6 "conftest.l"
| { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */
| yyless ((input () != 0)); }
| YY_BREAK
| case 6:
| YY_RULE_SETUP
| #line 8 "conftest.l"
| { unput (yytext[0]); }
| YY_BREAK
| case 7:
| YY_RULE_SETUP
| #line 9 "conftest.l"
| { BEGIN INITIAL; }
| YY_BREAK
| case 8:
| YY_RULE_SETUP
| #line 10 "conftest.l"
| ECHO;
| YY_BREAK
| #line 794 "lex.yy.c"
| case YY_STATE_EOF(INITIAL):
| yyterminate();
|
| case YY_END_OF_BUFFER:
| {
| /* Amount of text matched not including the EOB char. */
| int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
|
| /* Undo the effects of YY_DO_BEFORE_ACTION. */
| *yy_cp = (yy_hold_char);
| YY_RESTORE_YY_MORE_OFFSET
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
| {
| /* We're scanning a new file or input source. It's
| * possible that this happened because the user
| * just pointed yyin at a new source and called
| * yylex(). If so, then we have to assure
| * consistency between YY_CURRENT_BUFFER and our
| * globals. Here is the right place to do so, because
| * this is the first action (other than possibly a
| * back-up) that will match for the new input source.
| */
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
| }
|
| /* Note that here we test for yy_c_buf_p "<=" to the position
| * of the first EOB in the buffer, since yy_c_buf_p will
| * already have been incremented past the NUL character
| * (since all states make transitions on EOB to the
| * end-of-buffer state). Contrast this with the test
| * in input().
| */
| if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| { /* This was really a NUL. */
| yy_state_type yy_next_state;
|
| (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| /* Okay, we're now positioned to make the NUL
| * transition. We couldn't have
| * yy_get_previous_state() go ahead and do it
| * for us because it doesn't know how to deal
| * with the possibility of jamming (and we don't
| * want to build jamming into it because then it
| * will run more slowly).
| */
|
| yy_next_state = yy_try_NUL_trans( yy_current_state );
|
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
|
| if ( yy_next_state )
| {
| /* Consume the NUL. */
| yy_cp = ++(yy_c_buf_p);
| yy_current_state = yy_next_state;
| goto yy_match;
| }
|
| else
| {
| yy_cp = (yy_c_buf_p);
| goto yy_find_action;
| }
| }
|
| else switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_END_OF_FILE:
| {
| (yy_did_buffer_switch_on_eof) = 0;
|
| if ( yywrap( ) )
| {
| /* Note: because we've taken care in
| * yy_get_next_buffer() to have set up
| * yytext, we can now set up
| * yy_c_buf_p so that if some total
| * hoser (like flex itself) wants to
| * call the scanner after we return the
| * YY_NULL, it'll still work - another
| * YY_NULL will get returned.
| */
| (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
|
| yy_act = YY_STATE_EOF(YY_START);
| goto do_action;
| }
|
| else
| {
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| }
| break;
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) =
| (yytext_ptr) + yy_amount_of_matched_text;
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_match;
|
| case EOB_ACT_LAST_MATCH:
| (yy_c_buf_p) =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
|
| yy_current_state = yy_get_previous_state( );
|
| yy_cp = (yy_c_buf_p);
| yy_bp = (yytext_ptr) + YY_MORE_ADJ;
| goto yy_find_action;
| }
| break;
| }
|
| default:
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--no action found" );
| } /* end of action switch */
| } /* end of scanning one token */
| } /* end of user's declarations */
| } /* end of yylex */
|
| /* yy_get_next_buffer - try to read in a new buffer
| *
| * Returns a code representing an action:
| * EOB_ACT_LAST_MATCH -
| * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
| * EOB_ACT_END_OF_FILE - end of file
| */
| static int yy_get_next_buffer (void)
| {
| char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
| char *source = (yytext_ptr);
| int number_to_move, i;
| int ret_val;
|
| if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
| YY_FATAL_ERROR(
| "fatal flex scanner internal error--end of buffer missed" );
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
| { /* Don't try to fill the buffer, so this is an EOF. */
| if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
| {
| /* We matched a single character, the EOB, so
| * treat this as a final EOF.
| */
| return EOB_ACT_END_OF_FILE;
| }
|
| else
| {
| /* We matched some text prior to the EOB, first
| * process it.
| */
| return EOB_ACT_LAST_MATCH;
| }
| }
|
| /* Try to read more data. */
|
| /* First move last chars to start of buffer. */
| number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr) - 1);
|
| for ( i = 0; i < number_to_move; ++i )
| *(dest++) = *(source++);
|
| if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
| /* don't do the read, it's not guaranteed to return an EOF,
| * just force an EOF
| */
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
|
| else
| {
| int num_to_read =
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
|
| while ( num_to_read <= 0 )
| { /* Not enough room in the buffer - grow it. */
|
| YY_FATAL_ERROR(
| "input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
|
| }
|
| if ( num_to_read > YY_READ_BUF_SIZE )
| num_to_read = YY_READ_BUF_SIZE;
|
| /* Read in more data. */
| YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
| (yy_n_chars), num_to_read );
|
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| if ( (yy_n_chars) == 0 )
| {
| if ( number_to_move == YY_MORE_ADJ )
| {
| ret_val = EOB_ACT_END_OF_FILE;
| yyrestart( yyin );
| }
|
| else
| {
| ret_val = EOB_ACT_LAST_MATCH;
| YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
| YY_BUFFER_EOF_PENDING;
| }
| }
|
| else
| ret_val = EOB_ACT_CONTINUE_SCAN;
|
| if (((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
| /* Extend the array by 50%, plus the number we really need. */
| int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc(
| (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size );
| if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
| /* "- 2" to take care of EOB's */
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2);
| }
|
| (yy_n_chars) += number_to_move;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
| YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
|
| (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
|
| return ret_val;
| }
|
| /* yy_get_previous_state - get the state just before the EOB char
was reached */
|
| static yy_state_type yy_get_previous_state (void)
| {
| yy_state_type yy_current_state;
| char *yy_cp;
|
| yy_current_state = (yy_start);
|
| (yy_state_ptr) = (yy_state_buf);
| *(yy_state_ptr)++ = yy_current_state;
|
| for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
| {
| YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c];
| *(yy_state_ptr)++ = yy_current_state;
| }
|
| return yy_current_state;
| }
|
| /* yy_try_NUL_trans - try to make a transition on the NUL character
| *
| * synopsis
| * next_state = yy_try_NUL_trans( current_state );
| */
| static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
| {
| int yy_is_jam;
|
| YY_CHAR yy_c = 1;
| while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
| {
| yy_current_state = (int) yy_def[yy_current_state];
| if ( yy_current_state >= 13 )
| yy_c = yy_meta[yy_c];
| }
| yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c];
| yy_is_jam = (yy_current_state == 12);
| if ( ! yy_is_jam )
| *(yy_state_ptr)++ = yy_current_state;
|
| return yy_is_jam ? 0 : yy_current_state;
| }
|
| #ifndef YY_NO_UNPUT
|
| static void yyunput (int c, char * yy_bp )
| {
| char *yy_cp;
|
| yy_cp = (yy_c_buf_p);
|
| /* undo effects of setting up yytext */
| *yy_cp = (yy_hold_char);
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| { /* need to shift things up to make room */
| /* +2 for EOB chars. */
| int number_to_move = (yy_n_chars) + 2;
| char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
| YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
| char *source =
| &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
|
| while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
| *--dest = *--source;
|
| yy_cp += (int) (dest - source);
| yy_bp += (int) (dest - source);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
| (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
|
| if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
| YY_FATAL_ERROR( "flex scanner push-back overflow" );
| }
|
| *--yy_cp = (char) c;
|
| (yytext_ptr) = yy_bp;
| (yy_hold_char) = *yy_cp;
| (yy_c_buf_p) = yy_cp;
| }
|
| #endif
|
| #ifndef YY_NO_INPUT
| #ifdef __cplusplus
| static int yyinput (void)
| #else
| static int input (void)
| #endif
|
| {
| int c;
|
| *(yy_c_buf_p) = (yy_hold_char);
|
| if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
| {
| /* yy_c_buf_p now points to the character we want to return.
| * If this occurs *before* the EOB characters, then it's a
| * valid NUL; if not, then we've hit the end of the buffer.
| */
| if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
| /* This was really a NUL. */
| *(yy_c_buf_p) = '\0';
|
| else
| { /* need more input */
| int offset = (int) ((yy_c_buf_p) - (yytext_ptr));
| ++(yy_c_buf_p);
|
| switch ( yy_get_next_buffer( ) )
| {
| case EOB_ACT_LAST_MATCH:
| /* This happens because yy_g_n_b()
| * sees that we've accumulated a
| * token and flags that we need to
| * try matching the token before
| * proceeding. But for input(),
| * there's no matching to consider.
| * So convert the EOB_ACT_LAST_MATCH
| * to EOB_ACT_END_OF_FILE.
| */
|
| /* Reset buffer status. */
| yyrestart( yyin );
|
| /*FALLTHROUGH*/
|
| case EOB_ACT_END_OF_FILE:
| {
| if ( yywrap( ) )
| return 0;
|
| if ( ! (yy_did_buffer_switch_on_eof) )
| YY_NEW_FILE;
| #ifdef __cplusplus
| return yyinput();
| #else
| return input();
| #endif
| }
|
| case EOB_ACT_CONTINUE_SCAN:
| (yy_c_buf_p) = (yytext_ptr) + offset;
| break;
| }
| }
| }
|
| c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
| *(yy_c_buf_p) = '\0'; /* preserve yytext */
| (yy_hold_char) = *++(yy_c_buf_p);
|
| return c;
| }
| #endif /* ifndef YY_NO_INPUT */
|
| /** Immediately switch to a different input stream.
| * @param input_file A readable stream.
| *
| * @note This function does not reset the start condition to @c INITIAL .
| */
| void yyrestart (FILE * input_file )
| {
|
| if ( ! YY_CURRENT_BUFFER ){
| yyensure_buffer_stack ();
| YY_CURRENT_BUFFER_LVALUE =
| yy_create_buffer( yyin, YY_BUF_SIZE );
| }
|
| yy_init_buffer( YY_CURRENT_BUFFER, input_file );
| yy_load_buffer_state( );
| }
|
| /** Switch to a different input buffer.
| * @param new_buffer The new input buffer.
| *
| */
| void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
| {
|
| /* TODO. We should be able to replace this entire function body
| * with
| * yypop_buffer_state();
| * yypush_buffer_state(new_buffer);
| */
| yyensure_buffer_stack ();
| if ( YY_CURRENT_BUFFER == new_buffer )
| return;
|
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
| yy_load_buffer_state( );
|
| /* We don't actually know whether we did this switch during
| * EOF (yywrap()) processing, but the only time this flag
| * is looked at is after yywrap() is called, so it's safe
| * to go ahead and always set it.
| */
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| static void yy_load_buffer_state (void)
| {
| (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
| (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
| yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
| (yy_hold_char) = *(yy_c_buf_p);
| }
|
| /** Allocate and initialize an input buffer state.
| * @param file A readable stream.
| * @param size The character buffer size in bytes. When in doubt,
use @c YY_BUF_SIZE.
| *
| * @return the allocated buffer state.
| */
| YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
| {
| YY_BUFFER_STATE b;
|
| b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_buf_size = size;
|
| /* yy_ch_buf has to be 2 characters longer than the size given because
| * we need to put in 2 end-of-buffer characters.
| */
| b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) );
| if ( ! b->yy_ch_buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
|
| b->yy_is_our_buffer = 1;
|
| yy_init_buffer( b, file );
|
| return b;
| }
|
| /** Destroy the buffer.
| * @param b a buffer created with yy_create_buffer()
| *
| */
| void yy_delete_buffer (YY_BUFFER_STATE b )
| {
|
| if ( ! b )
| return;
|
| if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
| YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
|
| if ( b->yy_is_our_buffer )
| yyfree( (void *) b->yy_ch_buf );
|
| yyfree( (void *) b );
| }
|
| /* Initializes or reinitializes a buffer.
| * This function is sometimes called more than once on the same buffer,
| * such as during a yyrestart() or at EOF.
| */
| static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
|
| {
| int oerrno = errno;
|
| yy_flush_buffer( b );
|
| b->yy_input_file = file;
| b->yy_fill_buffer = 1;
|
| /* If b is the current buffer, then yy_init_buffer was _probably_
| * called from yyrestart() or through yy_get_next_buffer.
| * In that case, we don't want to reset the lineno or column.
| */
| if (b != YY_CURRENT_BUFFER){
| b->yy_bs_lineno = 1;
| b->yy_bs_column = 0;
| }
|
| b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
|
| errno = oerrno;
| }
|
| /** Discard all buffered characters. On the next scan, YY_INPUT will
be called.
| * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
| *
| */
| void yy_flush_buffer (YY_BUFFER_STATE b )
| {
| if ( ! b )
| return;
|
| b->yy_n_chars = 0;
|
| /* We always need two end-of-buffer characters. The first causes
| * a transition to the end-of-buffer state. The second causes
| * a jam in that state.
| */
| b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
| b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
|
| b->yy_buf_pos = &b->yy_ch_buf[0];
|
| b->yy_at_bol = 1;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| if ( b == YY_CURRENT_BUFFER )
| yy_load_buffer_state( );
| }
|
| /** Pushes the new state onto the stack. The new state becomes
| * the current state. This function will allocate the stack
| * if necessary.
| * @param new_buffer The new state.
| *
| */
| void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
| {
| if (new_buffer == NULL)
| return;
|
| yyensure_buffer_stack();
|
| /* This block is copied from yy_switch_to_buffer. */
| if ( YY_CURRENT_BUFFER )
| {
| /* Flush out information for old buffer. */
| *(yy_c_buf_p) = (yy_hold_char);
| YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
| YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
| }
|
| /* Only push if top exists. Otherwise, replace top. */
| if (YY_CURRENT_BUFFER)
| (yy_buffer_stack_top)++;
| YY_CURRENT_BUFFER_LVALUE = new_buffer;
|
| /* copied from yy_switch_to_buffer. */
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
|
| /** Removes and deletes the top of the stack, if present.
| * The next element becomes the new top.
| *
| */
| void yypop_buffer_state (void)
| {
| if (!YY_CURRENT_BUFFER)
| return;
|
| yy_delete_buffer(YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| if ((yy_buffer_stack_top) > 0)
| --(yy_buffer_stack_top);
|
| if (YY_CURRENT_BUFFER) {
| yy_load_buffer_state( );
| (yy_did_buffer_switch_on_eof) = 1;
| }
| }
|
| /* Allocates the stack if it does not exist.
| * Guarantees space for at least one push.
| */
| static void yyensure_buffer_stack (void)
| {
| yy_size_t num_to_alloc;
|
| if (!(yy_buffer_stack)) {
|
| /* First allocation is just for 2 elements, since we don't know if this
| * scanner will even need a stack. We use 2 instead of 1 to avoid an
| * immediate realloc on the next call.
| */
| num_to_alloc = 1; /* After all that talk, this was set to 1
anyways... */
| (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
| (num_to_alloc * sizeof(struct yy_buffer_state*)
| );
| if ( ! (yy_buffer_stack) )
| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
|
| memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
|
| (yy_buffer_stack_max) = num_to_alloc;
| (yy_buffer_stack_top) = 0;
| return;
| }
|
| if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
|
| /* Increase the buffer to prepare for a possible push. */
| yy_size_t grow_size = 8 /* arbitrary grow size */;
|
| num_to_alloc = (yy_buffer_stack_max) + grow_size;
| (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
| ((yy_buffer_stack),
| num_to_alloc * sizeof(struct yy_buffer_state*)
| );
| if ( ! (yy_buffer_stack) )
| YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
|
| /* zero only the new slots.*/
| memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size *
sizeof(struct yy_buffer_state*));
| (yy_buffer_stack_max) = num_to_alloc;
| }
| }
|
| /** Setup the input buffer state to scan directly from a
user-specified character buffer.
| * @param base the character buffer
| * @param size the size in bytes of the character buffer
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
| {
| YY_BUFFER_STATE b;
|
| if ( size < 2 ||
| base[size-2] != YY_END_OF_BUFFER_CHAR ||
| base[size-1] != YY_END_OF_BUFFER_CHAR )
| /* They forgot to leave room for the EOB's. */
| return NULL;
|
| b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) );
| if ( ! b )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
|
| b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */
| b->yy_buf_pos = b->yy_ch_buf = base;
| b->yy_is_our_buffer = 0;
| b->yy_input_file = NULL;
| b->yy_n_chars = b->yy_buf_size;
| b->yy_is_interactive = 0;
| b->yy_at_bol = 1;
| b->yy_fill_buffer = 0;
| b->yy_buffer_status = YY_BUFFER_NEW;
|
| yy_switch_to_buffer( b );
|
| return b;
| }
|
| /** Setup the input buffer state to scan a string. The next call to
yylex() will
| * scan from a @e copy of @a str.
| * @param yystr a NUL-terminated string to scan
| *
| * @return the newly allocated buffer state object.
| * @note If you want to scan bytes that may contain NUL values, then use
| * yy_scan_bytes() instead.
| */
| YY_BUFFER_STATE yy_scan_string (const char * yystr )
| {
|
| return yy_scan_bytes( yystr, (int) strlen(yystr) );
| }
|
| /** Setup the input buffer state to scan the given bytes. The next
call to yylex() will
| * scan from a @e copy of @a bytes.
| * @param yybytes the byte buffer to scan
| * @param _yybytes_len the number of bytes in the buffer pointed to
by @a bytes.
| *
| * @return the newly allocated buffer state object.
| */
| YY_BUFFER_STATE yy_scan_bytes (const char * yybytes, int _yybytes_len )
| {
| YY_BUFFER_STATE b;
| char *buf;
| yy_size_t n;
| int i;
|
| /* Get memory for full buffer, including space for trailing EOB's. */
| n = (yy_size_t) (_yybytes_len + 2);
| buf = (char *) yyalloc( n );
| if ( ! buf )
| YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
|
| for ( i = 0; i < _yybytes_len; ++i )
| buf[i] = yybytes[i];
|
| buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
|
| b = yy_scan_buffer( buf, n );
| if ( ! b )
| YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
|
| /* It's okay to grow etc. this buffer, and we should throw it
| * away when we're done.
| */
| b->yy_is_our_buffer = 1;
|
| return b;
| }
|
| #ifndef YY_EXIT_FAILURE
| #define YY_EXIT_FAILURE 2
| #endif
|
| static void yynoreturn yy_fatal_error (const char* msg )
| {
| fprintf( stderr, "%s\n", msg );
| exit( YY_EXIT_FAILURE );
| }
|
| /* Redefine yyless() so it works in section 3 code. */
|
| #undef yyless
| #define yyless(n) \
| do \
| { \
| /* Undo effects of setting up yytext. */ \
| int yyless_macro_arg = (n); \
| YY_LESS_LINENO(yyless_macro_arg);\
| yytext[yyleng] = (yy_hold_char); \
| (yy_c_buf_p) = yytext + yyless_macro_arg; \
| (yy_hold_char) = *(yy_c_buf_p); \
| *(yy_c_buf_p) = '\0'; \
| yyleng = yyless_macro_arg; \
| } \
| while ( 0 )
|
| /* Accessor methods (get/set functions) to struct members. */
|
| /** Get the current line number.
| *
| */
| int yyget_lineno (void)
| {
|
| return yylineno;
| }
|
| /** Get the input stream.
| *
| */
| FILE *yyget_in (void)
| {
| return yyin;
| }
|
| /** Get the output stream.
| *
| */
| FILE *yyget_out (void)
| {
| return yyout;
| }
|
| /** Get the length of the current token.
| *
| */
| int yyget_leng (void)
| {
| return yyleng;
| }
|
| /** Get the current token.
| *
| */
|
| char *yyget_text (void)
| {
| return yytext;
| }
|
| /** Set the current line number.
| * @param _line_number line number
| *
| */
| void yyset_lineno (int _line_number )
| {
|
| yylineno = _line_number;
| }
|
| /** Set the input stream. This does not discard the current
| * input buffer.
| * @param _in_str A readable stream.
| *
| * @see yy_switch_to_buffer
| */
| void yyset_in (FILE * _in_str )
| {
| yyin = _in_str ;
| }
|
| void yyset_out (FILE * _out_str )
| {
| yyout = _out_str ;
| }
|
| int yyget_debug (void)
| {
| return yy_flex_debug;
| }
|
| void yyset_debug (int _bdebug )
| {
| yy_flex_debug = _bdebug ;
| }
|
| static int yy_init_globals (void)
| {
| /* Initialization is the same as for the non-reentrant scanner.
| * This function is called from yylex_destroy(), so don't allocate here.
| */
|
| (yy_buffer_stack) = NULL;
| (yy_buffer_stack_top) = 0;
| (yy_buffer_stack_max) = 0;
| (yy_c_buf_p) = NULL;
| (yy_init) = 0;
| (yy_start) = 0;
|
| (yy_state_buf) = 0;
| (yy_state_ptr) = 0;
| (yy_full_match) = 0;
| (yy_lp) = 0;
|
| /* Defined in main.c */
| #ifdef YY_STDINIT
| yyin = stdin;
| yyout = stdout;
| #else
| yyin = NULL;
| yyout = NULL;
| #endif
|
| /* For future reference: Set errno on error, since we are called by
| * yylex_init()
| */
| return 0;
| }
|
| /* yylex_destroy is for both reentrant and non-reentrant scanners. */
| int yylex_destroy (void)
| {
|
| /* Pop the buffer stack, destroying each element. */
| while(YY_CURRENT_BUFFER){
| yy_delete_buffer( YY_CURRENT_BUFFER );
| YY_CURRENT_BUFFER_LVALUE = NULL;
| yypop_buffer_state();
| }
|
| /* Destroy the stack itself. */
| yyfree((yy_buffer_stack) );
| (yy_buffer_stack) = NULL;
|
| yyfree ( (yy_state_buf) );
| (yy_state_buf) = NULL;
|
| /* Reset the globals. This is important in a non-reentrant
scanner so the next time
| * yylex() is called, initialization will occur. */
| yy_init_globals( );
|
| return 0;
| }
|
| /*
| * Internal utility routines.
| */
|
| #ifndef yytext_ptr
| static void yy_flex_strncpy (char* s1, const char * s2, int n )
| {
|
| int i;
| for ( i = 0; i < n; ++i )
| s1[i] = s2[i];
| }
| #endif
|
| #ifdef YY_NEED_STRLEN
| static int yy_flex_strlen (const char * s )
| {
| int n;
| for ( n = 0; s[n]; ++n )
| ;
|
| return n;
| }
| #endif
|
| void *yyalloc (yy_size_t size )
| {
| return malloc(size);
| }
|
| void *yyrealloc (void * ptr, yy_size_t size )
| {
|
| /* The cast to (char *) in the following accommodates both
| * implementations that use char* generic pointers, and those
| * that use void* generic pointers. It works with the latter
| * because both ANSI C and C++ allow castless assignment from
| * any pointer type to void*, and deal with argument conversions
| * as though doing an assignment.
| */
| return realloc(ptr, size);
| }
|
| void yyfree (void * ptr )
| {
| free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
| }
|
| #define YYTABLES_NAME "yytables"
|
| #line 10 "conftest.l"
|
| #ifdef YYTEXT_POINTER
| extern char *yytext;
| #endif
| int
| main (void)
| {
| return ! yylex () + ! yywrap ();
| }
configure:10107: gcc -o conftest -g -O2 conftest.c -lfl -ldl >&5
configure:10107: $? = 0
configure:10117: result: -lfl
configure:10123: checking whether yytext is a pointer
configure:10140: gcc -o conftest -g -O2 conftest.c -lfl -ldl >&5
configure:10140: $? = 0
configure:10148: result: yes
configure:10176: checking whether NLS is requested
configure:10182: result: yes
configure:10188: checking for catalogs to be installed
configure:10220: result: es fi fr id ja ru rw sv tr uk zh_CN
configure:10247: checking whether NLS is requested
configure:10256: result: yes
configure:10294: checking for msgfmt
configure:10325: result: /usr/bin/msgfmt
configure:10334: checking for gmsgfmt
configure:10365: result: /usr/bin/msgfmt
configure:10405: checking for xgettext
configure:10436: result: /usr/bin/xgettext
configure:10476: checking for msgmerge
configure:10506: result: /usr/bin/msgmerge
configure:10543: checking whether to enable maintainer-specific
portions of Makefiles
configure:10552: result: no
configure:10578: checking for memory.h
configure:10578: result: yes
configure:10578: checking for sys/stat.h
configure:10578: result: yes
configure:10578: checking for sys/types.h
configure:10578: result: yes
configure:10578: checking for unistd.h
configure:10578: result: yes
configure:10591: checking whether compiling a cross-assembler
configure:10601: result: yes
configure:10606: checking for strsignal
configure:10606: gcc -o conftest -g -O2 conftest.c -ldl >&5
configure:10606: $? = 0
configure:10606: result: yes
configure:10617: checking for LC_MESSAGES
configure:10633: gcc -o conftest -g -O2 conftest.c -ldl >&5
configure:10633: $? = 0
configure:10641: result: yes
configure:10792: checking for working assert macro
configure:10817: gcc -o conftest -g -O2 conftest.c -ldl >&5
In file included from conftest.c:54:
conftest.c: In function 'main':
conftest.c:63:10: warning: implicit declaration of function 'strcmp'
[-Wimplicit-function-declaration]
63 | assert (!strcmp(s, "foo bar baz quux"));
| ^~~~~~
conftest.c:56:1: note: include '<string.h>' or provide a declaration of 'strcmp'
55 | #include <stdio.h>
56 | int
In file included from conftest.c:54:
conftest.c:63:10: warning: argument 1 null where non-null expected [-Wnonnull]
63 | assert (!strcmp(s, "foo bar baz quux"));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
conftest.c:63:10: note: in a call to built-in function 'strcmp'
configure:10817: $? = 0
configure:10825: result: yes
configure:10846: checking for a known getopt prototype in unistd.h
configure:10862: gcc -c -g -O2 conftest.c >&5
configure:10862: $? = 0
configure:10870: result: yes
configure:10879: checking whether declaration is required for environ
configure:10899: gcc -o conftest -g -O2 conftest.c -ldl >&5
configure:10899: $? = 0
configure:10907: result: no
configure:10916: checking whether declaration is required for ffs
configure:10936: gcc -o conftest -g -O2 conftest.c -ldl >&5
configure:10936: $? = 0
configure:10944: result: no
configure:10953: checking whether asprintf is declared
configure:10953: gcc -c -g -O2 conftest.c >&5
configure:10953: $? = 0
configure:10953: result: yes
configure:10963: checking whether mempcpy is declared
configure:10963: gcc -c -g -O2 conftest.c >&5
configure:10963: $? = 0
configure:10963: result: yes
configure:10973: checking whether stpcpy is declared
configure:10973: gcc -c -g -O2 conftest.c >&5
configure:10973: $? = 0
configure:10973: result: yes
configure:11053: checking for struct stat.st_mtim.tv_sec in sys/stat.h
configure:11071: gcc -c -g -O2 conftest.c >&5
In file included from /usr/include/x86_64-linux-gnu/sys/stat.h:25,
from conftest.c:60:
/usr/include/features.h:187:3: warning: #warning "_BSD_SOURCE and
_SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp]
187 | # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use
_DEFAULT_SOURCE"
| ^~~~~~~
configure:11071: $? = 0
configure:11085: result: yes
configure:11088: checking for struct stat.st_mtim.tv_nsec in sys/stat.h
configure:11106: gcc -c -g -O2 conftest.c >&5
In file included from /usr/include/x86_64-linux-gnu/sys/stat.h:25,
from conftest.c:61:
/usr/include/features.h:187:3: warning: #warning "_BSD_SOURCE and
_SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp]
187 | # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use
_DEFAULT_SOURCE"
| ^~~~~~~
configure:11106: $? = 0
configure:11120: result: yes
configure:11195: updating cache ./config.cache
configure:11239: checking that generated files are newer than configure
configure:11245: result: done
configure:11277: creating ./config.status
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by gas config.status 2.37, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on noah-tigerlake
config.status:1164: creating .gdbinit
config.status:1164: creating Makefile
config.status:1164: creating doc/Makefile
config.status:1164: creating po/Makefile.in
config.status:1164: creating config.h
config.status:1378: executing depfiles commands
config.status:1378: executing libtool commands
config.status:1378: executing default-1 commands
config.status:1378: executing default commands
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-pc-linux-gnu
ac_cv_c_bigendian=no
ac_cv_c_compiler_gnu=yes
ac_cv_env_CC_set=set
ac_cv_env_CC_value=gcc
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-g -O2 '
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=' '
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_YACC_set=set
ac_cv_env_YACC_value='bison -y'
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=x86_64-pc-linux-gnu
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=x86_64-pc-linux-gnu
ac_cv_env_target_alias_set=set
ac_cv_env_target_alias_value=x86_64-glibc-linux-gnu
ac_cv_func_strsignal=yes
ac_cv_have_decl_asprintf=yes
ac_cv_have_decl_mempcpy=yes
ac_cv_have_decl_stpcpy=yes
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_minix_config_h=no
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_header_windows_h=no
ac_cv_host=x86_64-pc-linux-gnu
ac_cv_lib_lex=-lfl
ac_cv_objext=o
ac_cv_path_EGREP='/usr/bin/grep -E'
ac_cv_path_FGREP='/usr/bin/grep -F'
ac_cv_path_GMSGFMT=/usr/bin/msgfmt
ac_cv_path_GREP=/usr/bin/grep
ac_cv_path_MSGFMT=/usr/bin/msgfmt
ac_cv_path_MSGMERGE=/usr/bin/msgmerge
ac_cv_path_SED=/usr/bin/sed
ac_cv_path_XGETTEXT=/usr/bin/xgettext
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AR='ar --plugin /usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so'
ac_cv_prog_AWK=gawk
ac_cv_prog_CC=gcc
ac_cv_prog_CPP='gcc -E'
ac_cv_prog_LEX=flex
ac_cv_prog_OBJDUMP=objdump
ac_cv_prog_RANLIB='ranlib --plugin
/usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so'
ac_cv_prog_YACC='bison -y'
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_cc_c89=
ac_cv_prog_cc_g=yes
ac_cv_prog_lex_root=lex.yy
ac_cv_prog_lex_yytext_pointer=yes
ac_cv_prog_make_make_set=yes
ac_cv_safe_to_define___extensions__=yes
ac_cv_search_dlsym=-ldl
ac_cv_sys_file_offset_bits=no
ac_cv_sys_largefile_CC=no
ac_cv_target=x86_64-glibc-linux-gnu
am_cv_CC_dependencies_compiler_type=gcc3
am_cv_make_support_nested_variables=yes
am_cv_prog_cc_c_o=yes
am_cv_val_LC_MESSAGES=yes
gas_cv_assert_ok=yes
gas_cv_decl_getopt_unistd_h=yes
gas_cv_decl_needed_environ=no
gas_cv_decl_needed_ffs=no
gas_cv_have_sys_stat_type_member_st_mtim_tv_nsec=yes
gas_cv_have_sys_stat_type_member_st_mtim_tv_sec=yes
gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
lt_cv_archive_cmds_need_lc=no
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_ld_reload_flag=-r
lt_cv_nm_interface='BSD nm'
lt_cv_objdir=.libs
lt_cv_path_LD=ld
lt_cv_path_NM=nm
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_pic_works=yes
lt_cv_prog_compiler_rtti_exceptions=no
lt_cv_prog_compiler_static_works=yes
lt_cv_prog_gnu_ld=yes
lt_cv_shlibpath_overrides_runpath=yes
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[
]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2
\2/p'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^
]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\)
\([^ ]*\)$/ {"\2", (void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e
'\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e
'\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *)
\&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"lib\2",
(void *) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern
int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char
\1;/p'\'''
lt_cv_sys_max_cmd_len=1879296
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /some/were/build-many/src/binutils/missing aclocal-1.15'
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
AR='ar --plugin /usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so
--plugin /usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so'
AUTOCONF='${SHELL} /some/were/build-many/src/binutils/missing autoconf'
AUTOHEADER='${SHELL} /some/were/build-many/src/binutils/missing autoheader'
AUTOMAKE='${SHELL} /some/were/build-many/src/binutils/missing automake-1.15'
AWK='gawk'
CATALOGS=' es.gmo fi.gmo fr.gmo id.gmo ja.gmo ru.gmo rw.gmo sv.gmo
tr.gmo uk.gmo zh_CN.gmo'
CATOBJEXT='.gmo'
CC='gcc'
CCDEPMODE='depmode=gcc3'
CFLAGS='-g -O2 '
CPP='gcc -E'
CPPFLAGS=''
CYGPATH_W='echo'
DATADIRNAME='share'
DEFS='-DHAVE_CONFIG_H'
DEPDIR='.deps'
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/usr/bin/grep -E'
EXEEXT=''
FGREP='/usr/bin/grep -F'
GDBINIT='.gdbinit'
GENCAT='gencat'
GENINSRC_NEVER_FALSE=''
GENINSRC_NEVER_TRUE='#'
GMSGFMT='/usr/bin/msgfmt'
GREP='/usr/bin/grep'
INCINTL=''
INSTALL_DATA='/usr/bin/install -c -m 644'
INSTALL_PROGRAM='/usr/bin/install -c'
INSTALL_SCRIPT='/usr/bin/install -c'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
INSTOBJEXT='.mo'
LARGEFILE_CPPFLAGS=''
LD='ld -m elf_x86_64'
LDFLAGS=' '
LEX='flex'
LEXLIB='-lfl'
LEX_OUTPUT_ROOT='lex.yy'
LIBINTL=''
LIBINTL_DEP=''
LIBM=''
LIBOBJS=''
LIBS='-ldl '
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
LIPO=''
LN_S='ln -s'
LTLIBOBJS=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='makeinfo --split-size=5000000'
MKDIR_P='/usr/bin/mkdir -p'
MKINSTALLDIRS='/some/were/build-many/src/binutils/gas/../mkinstalldirs'
MSGFMT='/usr/bin/msgfmt'
MSGMERGE='/usr/bin/msgmerge'
NM='nm'
NMEDIT=''
NO_WERROR='-Wno-error'
OBJDUMP='objdump'
OBJEXT='o'
OPCODES_LIB='../opcodes/libopcodes.la'
OTOOL64=''
OTOOL=''
PACKAGE='gas'
PACKAGE_BUGREPORT=''
PACKAGE_NAME='gas'
PACKAGE_STRING='gas 2.37'
PACKAGE_TARNAME='gas'
PACKAGE_URL=''
PACKAGE_VERSION='2.37'
PATH_SEPARATOR=':'
POSUB='po'
RANLIB='ranlib --plugin
/usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so --plugin
/usr/lib/gcc/x86_64-linux-gnu/11/liblto_plugin.so'
SED='/usr/bin/sed'
SET_MAKE=''
SHELL='/bin/bash'
STRIP='strip'
USE_NLS='yes'
VERSION='2.37'
WARN_CFLAGS='-W -Wall -Wstrict-prototypes -Wmissing-prototypes
-Wshadow -Wstack-usage=262144 -Werror'
WARN_CFLAGS_FOR_BUILD='-W -Wall -Wstrict-prototypes
-Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Werror'
WARN_WRITE_STRINGS='-Wwrite-strings'
XGETTEXT='/usr/bin/xgettext'
YACC='bison -y'
YFLAGS=''
ac_ct_CC=''
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE='#'
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=' -I$(srcdir)'
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
atof='ieee'
bindir='${exec_prefix}/bin'
build='x86_64-pc-linux-gnu'
build_alias='x86_64-pc-linux-gnu'
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='pc'
cgen_cpu_prefix=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
do_compare='cmp --ignore-initial=16 $$f1 $$f2'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='${prefix}'
extra_objects=''
host='x86_64-pc-linux-gnu'
host_alias='x86_64-pc-linux-gnu'
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='pc'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /some/were/build-many/src/binutils/install-sh'
install_tooldir='install-exec-tooldir'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
obj_format='elf'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/some/were/build-many/install/compilers/x86_64-linux-gnu'
program_transform_name='s&^&x86_64-glibc-linux-gnu-&'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='x86_64-glibc-linux-gnu'
target_alias='x86_64-glibc-linux-gnu'
target_cpu='x86_64'
target_cpu_type='i386'
target_os='linux-gnu'
target_vendor='glibc'
te_file='linux'
zlibdir='-L$(top_builddir)/../zlib'
zlibinc='-I$(top_srcdir)/../zlib'
## ----------- ##
## confdefs.h. ##
## ----------- ##
/* confdefs.h */
#define PACKAGE_NAME "gas"
#define PACKAGE_TARNAME "gas"
#define PACKAGE_VERSION "2.37"
#define PACKAGE_STRING "gas 2.37"
#define PACKAGE_BUGREPORT ""
#define PACKAGE_URL ""
#define PACKAGE "gas"
#define VERSION "2.37"
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define __EXTENSIONS__ 1
#define _ALL_SOURCE 1
#define _GNU_SOURCE 1
#define _POSIX_PTHREAD_SEMANTICS 1
#define _TANDEM_SOURCE 1
#define HAVE_DLFCN_H 1
#define LT_OBJDIR ".libs/"
#define HAVE_DLFCN_H 1
#define ENABLE_CHECKING 1
#define DEFAULT_ARCH "x86_64"
#define DEFAULT_GENERATE_X86_RELAX_RELOCATIONS 1
#define DEFAULT_GENERATE_ELF_STT_COMMON 0
#define DEFAULT_GENERATE_BUILD_NOTES 0
#define DEFAULT_X86_USED_NOTE 1
#define DEFAULT_RISCV_ATTR 0
#define DEFAULT_MIPS_FIX_LOONGSON3_LLSC 0
#define DEFAULT_FLAG_COMPRESS_DEBUG 1
#define EMULATIONS &i386elf,
#define DEFAULT_EMULATION "i386elf"
#define TARGET_ALIAS "x86_64-glibc-linux-gnu"
#define TARGET_CANONICAL "x86_64-glibc-linux-gnu"
#define TARGET_CPU "x86_64"
#define TARGET_VENDOR "glibc"
#define TARGET_OS "linux-gnu"
#define YYTEXT_POINTER 1
#define ENABLE_NLS 1
#define HAVE_MEMORY_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_UNISTD_H 1
#define CROSS_COMPILE 1
#define HAVE_STRSIGNAL 1
#define HAVE_LC_MESSAGES 1
#define HAVE_DECL_GETOPT 1
#define HAVE_DECL_ASPRINTF 1
#define HAVE_DECL_MEMPCPY 1
#define HAVE_DECL_STPCPY 1
#define HAVE_ST_MTIM_TV_SEC 1
#define HAVE_ST_MTIM_TV_NSEC 1
configure: exit 0
```
>
> Thanks,
> Florian
>
* Noah Goldstein:
> On Mon, Sep 27, 2021 at 1:11 PM Florian Weimer <fweimer@redhat.com> wrote:
>>
>> * Noah Goldstein:
>>
>> > On Mon, Sep 27, 2021 at 12:56 PM Florian Weimer <fweimer@redhat.com> wrote:
>> >>
>> >> * Noah Goldstein:
>> >>
>> >> > $> cat
>> >> > build-many/logs/compilers/x86_64-linux-gnu/003-compilers-x86_64-linux-gnu-binutils-configure-log.txt
>> >>
>> >> There should be a config.log file in the binutils build directory (under
>> >> build-many/build/compilers). I hope this file contains illuminating
>> >> data.
>> >
>> > Oh sorry. Here is the output of config.log
>> >
>> > ```
>> > $> cat build-many/build/compilers/x86_64-linux-gnu/binutils/config.log
>>
>> Hmm, is there a binutils/gas/config.log as well?
>
> Here is the dump. Thanks for the help!
So we clearly have:
> #define DEFAULT_GENERATE_ELF_STT_COMMON 0
And yet the build failes with the indicated error?
Could you check what as/config.h contains? This is very odd.
Thanks,
Florian
On Mon, Sep 27, 2021 at 1:22 PM Florian Weimer <fweimer@redhat.com> wrote:
> * Noah Goldstein:
>
> > On Mon, Sep 27, 2021 at 1:11 PM Florian Weimer <fweimer@redhat.com>
> wrote:
> >>
> >> * Noah Goldstein:
> >>
> >> > On Mon, Sep 27, 2021 at 12:56 PM Florian Weimer <fweimer@redhat.com>
> wrote:
> >> >>
> >> >> * Noah Goldstein:
> >> >>
> >> >> > $> cat
> >> >> >
> build-many/logs/compilers/x86_64-linux-gnu/003-compilers-x86_64-linux-gnu-binutils-configure-log.txt
> >> >>
> >> >> There should be a config.log file in the binutils build directory
> (under
> >> >> build-many/build/compilers). I hope this file contains illuminating
> >> >> data.
> >> >
> >> > Oh sorry. Here is the output of config.log
> >> >
> >> > ```
> >> > $> cat build-many/build/compilers/x86_64-linux-gnu/binutils/config.log
> >>
> >> Hmm, is there a binutils/gas/config.log as well?
> >
> > Here is the dump. Thanks for the help!
>
> So we clearly have:
>
> > #define DEFAULT_GENERATE_ELF_STT_COMMON 0
>
> And yet the build failes with the indicated error?
>
> Could you check what as/config.h contains? This is very odd.
>
/* Define to 1 if you want to generate ELF common symbols with the
STT_COMMON
type by default. */
#define DEFAULT_GENERATE_ELF_STT_COMMON 0
is in gas/config.h
Include tar file of all logs for the build.
Full command / stdout was:
```
rm -rf build-many; python3 src/glibc/scripts/build-many-glibcs.py
build-many/ checkout gcc-vcs-11; echo "Host Libraries"; python3
src/glibc/scripts/build-many-glibcs.py build-many host-libraries
--keep=all; echo "Compilers"; python3
src/glibc/scripts/build-many-glibcs.py build-many compilers
x86_64-linux-gnu --keep=all; python3 src/glibc/scripts/build-many-glibcs.py
build-many glibcs --keep=all
configure.ac:83: installing 'build-aux/compile'
configure.ac:46: installing 'build-aux/config.guess'
configure.ac:46: installing 'build-aux/config.sub'
configure.ac:26: installing 'build-aux/install-sh'
configure.ac:26: installing 'build-aux/missing'
Makefile.am: installing './INSTALL'
Makefile.am: installing 'build-aux/depcomp'
Makefile.am:32: installing 'build-aux/mdate-sh'
doc/Makefrag.am:106: warning: user target '$(srcdir)/doc/version.texi'
defined here ...
Makefile.am:155: 'doc/Makefrag.am' included from here
/usr/share/automake-1.16/am/texi-vers.am: ... overrides Automake target
'$(srcdir)/doc/version.texi' defined here
Makefile.am:32: installing 'build-aux/texinfo.tex'
parallel-tests: installing 'build-aux/test-driver'
configure.ac:25: installing 'build-aux/compile'
configure.ac:9: installing 'build-aux/config.guess'
configure.ac:9: installing 'build-aux/config.sub'
configure.ac:14: installing 'build-aux/install-sh'
configure.ac:14: installing 'build-aux/missing'
Makefile.am: installing './INSTALL'
Makefile.am: installing 'build-aux/depcomp'
configure.ac: installing 'build-aux/ylwrap'
parallel-tests: installing 'build-aux/test-driver'
Host Libraries
PASS: host-libraries gmp rm
PASS: host-libraries gmp mkdir
PASS: host-libraries gmp configure
PASS: host-libraries gmp build
PASS: host-libraries gmp check
PASS: host-libraries gmp install
PASS: host-libraries mpfr rm
PASS: host-libraries mpfr mkdir
PASS: host-libraries mpfr configure
PASS: host-libraries mpfr build
PASS: host-libraries mpfr check
PASS: host-libraries mpfr install
PASS: host-libraries mpc rm
PASS: host-libraries mpc mkdir
PASS: host-libraries mpc configure
PASS: host-libraries mpc build
PASS: host-libraries mpc check
PASS: host-libraries mpc install
PASS: host-libraries done
Compilers
PASS: compilers-x86_64-linux-gnu check-host-libraries
PASS: compilers-x86_64-linux-gnu binutils rm
PASS: compilers-x86_64-linux-gnu binutils mkdir
PASS: compilers-x86_64-linux-gnu binutils configure
FAIL: compilers-x86_64-linux-gnu binutils build
UNRESOLVED: compilers-x86_64-linux-gnu binutils install
UNRESOLVED: compilers-x86_64-linux-gnu linux rm
UNRESOLVED: compilers-x86_64-linux-gnu linux mkdir
UNRESOLVED: compilers-x86_64-linux-gnu linux install-headers
UNRESOLVED: compilers-x86_64-linux-gnu gcc-first rm
UNRESOLVED: compilers-x86_64-linux-gnu gcc-first mkdir
UNRESOLVED: compilers-x86_64-linux-gnu gcc-first configure
UNRESOLVED: compilers-x86_64-linux-gnu gcc-first build
UNRESOLVED: compilers-x86_64-linux-gnu gcc-first install
UNRESOLVED: compilers-x86_64-linux-gnu glibc x86_64-linux-gnu rm
UNRESOLVED: compilers-x86_64-linux-gnu glibc x86_64-linux-gnu mkdir
UNRESOLVED: compilers-x86_64-linux-gnu glibc x86_64-linux-gnu configure
UNRESOLVED: compilers-x86_64-linux-gnu glibc x86_64-linux-gnu build
UNRESOLVED: compilers-x86_64-linux-gnu glibc x86_64-linux-gnu install
UNRESOLVED: compilers-x86_64-linux-gnu glibc x86_64-linux-gnu mkdir-lib
UNRESOLVED: compilers-x86_64-linux-gnu glibc x86_64-linux-gnu-x32 rm
UNRESOLVED: compilers-x86_64-linux-gnu glibc x86_64-linux-gnu-x32 mkdir
UNRESOLVED: compilers-x86_64-linux-gnu glibc x86_64-linux-gnu-x32 configure
UNRESOLVED: compilers-x86_64-linux-gnu glibc x86_64-linux-gnu-x32 build
UNRESOLVED: compilers-x86_64-linux-gnu glibc x86_64-linux-gnu-x32 install
UNRESOLVED: compilers-x86_64-linux-gnu glibc x86_64-linux-gnu-x32 mkdir-lib
UNRESOLVED: compilers-x86_64-linux-gnu glibc i686-linux-gnu rm
UNRESOLVED: compilers-x86_64-linux-gnu glibc i686-linux-gnu mkdir
UNRESOLVED: compilers-x86_64-linux-gnu glibc i686-linux-gnu configure
UNRESOLVED: compilers-x86_64-linux-gnu glibc i686-linux-gnu build
UNRESOLVED: compilers-x86_64-linux-gnu glibc i686-linux-gnu install
UNRESOLVED: compilers-x86_64-linux-gnu glibc i686-linux-gnu mkdir-lib
UNRESOLVED: compilers-x86_64-linux-gnu gcc rm
UNRESOLVED: compilers-x86_64-linux-gnu gcc mkdir
UNRESOLVED: compilers-x86_64-linux-gnu gcc configure
UNRESOLVED: compilers-x86_64-linux-gnu gcc build
UNRESOLVED: compilers-x86_64-linux-gnu gcc install
UNRESOLVED: compilers-x86_64-linux-gnu done
FAIL: glibcs-arm-linux-gnueabi check-compilers
FAIL: glibcs-aarch64-linux-gnu check-compilers
FAIL: glibcs-alpha-linux-gnu check-compilers
FAIL: glibcs-arceb-linux-gnu check-compilers
FAIL: glibcs-aarch64_be-linux-gnu check-compilers
FAIL: glibcs-aarch64-linux-gnu-disable-multi-arch check-compilers
FAIL: glibcs-arc-linux-gnu check-compilers
FAIL: glibcs-arc-linux-gnuhf check-compilers
UNRESOLVED: glibcs-arm-linux-gnueabi rm
UNRESOLVED: glibcs-alpha-linux-gnu rm
UNRESOLVED: glibcs-aarch64_be-linux-gnu rm
UNRESOLVED: glibcs-arc-linux-gnu rm
UNRESOLVED: glibcs-arceb-linux-gnu rm
UNRESOLVED: glibcs-aarch64-linux-gnu-disable-multi-arch rm
UNRESOLVED: glibcs-aarch64-linux-gnu rm
UNRESOLVED: glibcs-arm-linux-gnueabi mkdir
UNRESOLVED: glibcs-alpha-linux-gnu mkdir
UNRESOLVED: glibcs-arc-linux-gnu mkdir
UNRESOLVED: glibcs-arc-linux-gnuhf rm
UNRESOLVED: glibcs-arceb-linux-gnu mkdir
UNRESOLVED: glibcs-aarch64_be-linux-gnu mkdir
UNRESOLVED: glibcs-aarch64-linux-gnu-disable-multi-arch mkdir
UNRESOLVED: glibcs-arc-linux-gnuhf mkdir
UNRESOLVED: glibcs-aarch64-linux-gnu mkdir
UNRESOLVED: glibcs-arm-linux-gnueabi configure
UNRESOLVED: glibcs-arceb-linux-gnu configure
UNRESOLVED: glibcs-arm-linux-gnueabi build
UNRESOLVED: glibcs-arceb-linux-gnu build
UNRESOLVED: glibcs-arc-linux-gnu configure
UNRESOLVED: glibcs-arc-linux-gnu build
UNRESOLVED: glibcs-arm-linux-gnueabi install
UNRESOLVED: glibcs-aarch64-linux-gnu-disable-multi-arch configure
UNRESOLVED: glibcs-arceb-linux-gnu install
UNRESOLVED: glibcs-alpha-linux-gnu configure
UNRESOLVED: glibcs-arc-linux-gnu install
UNRESOLVED: glibcs-alpha-linux-gnu build
UNRESOLVED: glibcs-aarch64-linux-gnu-disable-multi-arch build
UNRESOLVED: glibcs-arm-linux-gnueabi mkdir-lib
UNRESOLVED: glibcs-arceb-linux-gnu mkdir-lib
UNRESOLVED: glibcs-alpha-linux-gnu install
UNRESOLVED: glibcs-aarch64-linux-gnu configure
UNRESOLVED: glibcs-aarch64-linux-gnu-disable-multi-arch install
UNRESOLVED: glibcs-arc-linux-gnuhf configure
UNRESOLVED: glibcs-aarch64_be-linux-gnu configure
UNRESOLVED: glibcs-arc-linux-gnu mkdir-lib
UNRESOLVED: glibcs-aarch64-linux-gnu build
UNRESOLVED: glibcs-arceb-linux-gnu check
UNRESOLVED: glibcs-arc-linux-gnuhf build
UNRESOLVED: glibcs-arm-linux-gnueabi check
PASS: glibcs-arm-linux-gnueabi save-logs
UNRESOLVED: glibcs-aarch64_be-linux-gnu build
UNRESOLVED: glibcs-aarch64-linux-gnu install
UNRESOLVED: glibcs-arc-linux-gnu check
FAIL: glibcs-arm-linux-gnueabi-v4t check-compilers
PASS: glibcs-arceb-linux-gnu save-logs
UNRESOLVED: glibcs-alpha-linux-gnu mkdir-lib
UNRESOLVED: glibcs-aarch64-linux-gnu-disable-multi-arch mkdir-lib
UNRESOLVED: glibcs-arc-linux-gnuhf install
FAIL: glibcs-arm-linux-gnueabihf check-compilers
PASS: glibcs-arc-linux-gnu save-logs
UNRESOLVED: glibcs-arm-linux-gnueabi-v4t rm
UNRESOLVED: glibcs-alpha-linux-gnu check
UNRESOLVED: glibcs-aarch64-linux-gnu mkdir-lib
UNRESOLVED: glibcs-aarch64-linux-gnu-disable-multi-arch check
FAIL: glibcs-arm-linux-gnueabihf-thumb check-compilers
UNRESOLVED: glibcs-arm-linux-gnueabihf rm
UNRESOLVED: glibcs-aarch64_be-linux-gnu install
UNRESOLVED: glibcs-arm-linux-gnueabihf mkdir
UNRESOLVED: glibcs-arm-linux-gnueabihf-thumb rm
PASS: glibcs-alpha-linux-gnu save-logs
UNRESOLVED: glibcs-arm-linux-gnueabi-v4t mkdir
UNRESOLVED: glibcs-arc-linux-gnuhf mkdir-lib
PASS: glibcs-aarch64-linux-gnu-disable-multi-arch save-logs
UNRESOLVED: glibcs-aarch64-linux-gnu check
UNRESOLVED: glibcs-aarch64_be-linux-gnu mkdir-lib
UNRESOLVED: glibcs-arc-linux-gnuhf check
UNRESOLVED: glibcs-arm-linux-gnueabihf-thumb mkdir
UNRESOLVED: glibcs-aarch64_be-linux-gnu check
PASS: glibcs-arc-linux-gnuhf save-logs
FAIL: glibcs-arm-linux-gnueabihf-v7a check-compilers
PASS: glibcs-aarch64-linux-gnu save-logs
FAIL: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch check-compilers
PASS: glibcs-aarch64_be-linux-gnu save-logs
FAIL: glibcs-armeb-linux-gnueabi check-compilers
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch rm
UNRESOLVED: glibcs-armeb-linux-gnueabi rm
FAIL: glibcs-armeb-linux-gnueabi-be8 check-compilers
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch mkdir
FAIL: glibcs-armeb-linux-gnueabihf check-compilers
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a rm
UNRESOLVED: glibcs-armeb-linux-gnueabi mkdir
UNRESOLVED: glibcs-armeb-linux-gnueabi-be8 rm
UNRESOLVED: glibcs-armeb-linux-gnueabihf rm
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a mkdir
UNRESOLVED: glibcs-arm-linux-gnueabihf configure
UNRESOLVED: glibcs-armeb-linux-gnueabi-be8 mkdir
UNRESOLVED: glibcs-armeb-linux-gnueabihf mkdir
UNRESOLVED: glibcs-arm-linux-gnueabihf build
UNRESOLVED: glibcs-arm-linux-gnueabihf install
UNRESOLVED: glibcs-armeb-linux-gnueabi-be8 configure
UNRESOLVED: glibcs-arm-linux-gnueabi-v4t configure
UNRESOLVED: glibcs-armeb-linux-gnueabi-be8 build
UNRESOLVED: glibcs-arm-linux-gnueabihf mkdir-lib
UNRESOLVED: glibcs-armeb-linux-gnueabihf configure
UNRESOLVED: glibcs-arm-linux-gnueabi-v4t build
UNRESOLVED: glibcs-armeb-linux-gnueabi-be8 install
UNRESOLVED: glibcs-arm-linux-gnueabihf-thumb configure
UNRESOLVED: glibcs-armeb-linux-gnueabihf build
UNRESOLVED: glibcs-arm-linux-gnueabihf check
UNRESOLVED: glibcs-armeb-linux-gnueabi-be8 mkdir-lib
UNRESOLVED: glibcs-armeb-linux-gnueabihf install
UNRESOLVED: glibcs-arm-linux-gnueabihf-thumb build
UNRESOLVED: glibcs-armeb-linux-gnueabi-be8 check
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch configure
PASS: glibcs-arm-linux-gnueabihf save-logs
PASS: glibcs-armeb-linux-gnueabi-be8 save-logs
UNRESOLVED: glibcs-arm-linux-gnueabi-v4t install
UNRESOLVED: glibcs-arm-linux-gnueabihf-thumb install
UNRESOLVED: glibcs-armeb-linux-gnueabi configure
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build
FAIL: glibcs-csky-linux-gnuabiv2 check-compilers
FAIL: glibcs-armeb-linux-gnueabihf-be8 check-compilers
UNRESOLVED: glibcs-arm-linux-gnueabi-v4t mkdir-lib
UNRESOLVED: glibcs-armeb-linux-gnueabi build
UNRESOLVED: glibcs-arm-linux-gnueabihf-thumb mkdir-lib
UNRESOLVED: glibcs-armeb-linux-gnueabihf mkdir-lib
UNRESOLVED: glibcs-arm-linux-gnueabi-v4t check
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a configure
UNRESOLVED: glibcs-arm-linux-gnueabihf-thumb check
PASS: glibcs-arm-linux-gnueabi-v4t save-logs
UNRESOLVED: glibcs-csky-linux-gnuabiv2 rm
UNRESOLVED: glibcs-armeb-linux-gnueabihf-be8 rm
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch install
UNRESOLVED: glibcs-armeb-linux-gnueabihf check
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a build
PASS: glibcs-arm-linux-gnueabihf-thumb save-logs
FAIL: glibcs-csky-linux-gnuabiv2-soft check-compilers
PASS: glibcs-armeb-linux-gnueabihf save-logs
UNRESOLVED: glibcs-armeb-linux-gnueabi install
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch mkdir-lib
UNRESOLVED: glibcs-csky-linux-gnuabiv2 mkdir
UNRESOLVED: glibcs-csky-linux-gnuabiv2-soft rm
UNRESOLVED: glibcs-armeb-linux-gnueabihf-be8 mkdir
FAIL: glibcs-i486-linux-gnu check-compilers
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a install
FAIL: glibcs-hppa-linux-gnu check-compilers
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch check
UNRESOLVED: glibcs-armeb-linux-gnueabi mkdir-lib
PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch save-logs
UNRESOLVED: glibcs-hppa-linux-gnu rm
FAIL: glibcs-i586-linux-gnu check-compilers
UNRESOLVED: glibcs-csky-linux-gnuabiv2-soft mkdir
UNRESOLVED: glibcs-i486-linux-gnu rm
UNRESOLVED: glibcs-hppa-linux-gnu mkdir
UNRESOLVED: glibcs-armeb-linux-gnueabi check
UNRESOLVED: glibcs-i586-linux-gnu rm
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a mkdir-lib
PASS: glibcs-armeb-linux-gnueabi save-logs
UNRESOLVED: glibcs-i486-linux-gnu mkdir
FAIL: glibcs-i686-gnu check-compilers
UNRESOLVED: glibcs-i586-linux-gnu mkdir
UNRESOLVED: glibcs-arm-linux-gnueabihf-v7a check
PASS: glibcs-arm-linux-gnueabihf-v7a save-logs
UNRESOLVED: glibcs-i686-gnu rm
UNRESOLVED: glibcs-csky-linux-gnuabiv2 configure
FAIL: glibcs-i686-linux-gnu check-compilers
UNRESOLVED: glibcs-csky-linux-gnuabiv2 build
UNRESOLVED: glibcs-armeb-linux-gnueabihf-be8 configure
UNRESOLVED: glibcs-i686-gnu mkdir
UNRESOLVED: glibcs-csky-linux-gnuabiv2 install
UNRESOLVED: glibcs-armeb-linux-gnueabihf-be8 build
UNRESOLVED: glibcs-i686-linux-gnu rm
UNRESOLVED: glibcs-csky-linux-gnuabiv2 mkdir-lib
UNRESOLVED: glibcs-armeb-linux-gnueabihf-be8 install
UNRESOLVED: glibcs-csky-linux-gnuabiv2 check
UNRESOLVED: glibcs-i686-linux-gnu mkdir
PASS: glibcs-csky-linux-gnuabiv2 save-logs
UNRESOLVED: glibcs-armeb-linux-gnueabihf-be8 mkdir-lib
UNRESOLVED: glibcs-hppa-linux-gnu configure
FAIL: glibcs-i686-linux-gnu-disable-multi-arch check-compilers
UNRESOLVED: glibcs-i486-linux-gnu configure
UNRESOLVED: glibcs-i486-linux-gnu build
UNRESOLVED: glibcs-hppa-linux-gnu build
UNRESOLVED: glibcs-armeb-linux-gnueabihf-be8 check
UNRESOLVED: glibcs-csky-linux-gnuabiv2-soft configure
UNRESOLVED: glibcs-i686-linux-gnu-disable-multi-arch rm
UNRESOLVED: glibcs-csky-linux-gnuabiv2-soft build
PASS: glibcs-armeb-linux-gnueabihf-be8 save-logs
UNRESOLVED: glibcs-i486-linux-gnu install
UNRESOLVED: glibcs-csky-linux-gnuabiv2-soft install
UNRESOLVED: glibcs-i686-gnu configure
UNRESOLVED: glibcs-i586-linux-gnu configure
UNRESOLVED: glibcs-hppa-linux-gnu install
FAIL: glibcs-i686-linux-gnu-static-pie check-compilers
UNRESOLVED: glibcs-i686-linux-gnu-disable-multi-arch mkdir
UNRESOLVED: glibcs-i586-linux-gnu build
UNRESOLVED: glibcs-i686-gnu build
UNRESOLVED: glibcs-i486-linux-gnu mkdir-lib
UNRESOLVED: glibcs-csky-linux-gnuabiv2-soft mkdir-lib
UNRESOLVED: glibcs-i686-linux-gnu-static-pie rm
UNRESOLVED: glibcs-i686-gnu install
UNRESOLVED: glibcs-i586-linux-gnu install
UNRESOLVED: glibcs-i486-linux-gnu check
UNRESOLVED: glibcs-hppa-linux-gnu mkdir-lib
UNRESOLVED: glibcs-csky-linux-gnuabiv2-soft check
UNRESOLVED: glibcs-i686-gnu mkdir-lib
UNRESOLVED: glibcs-i686-linux-gnu-static-pie mkdir
UNRESOLVED: glibcs-i686-gnu check
PASS: glibcs-i486-linux-gnu save-logs
PASS: glibcs-i686-gnu save-logs
PASS: glibcs-csky-linux-gnuabiv2-soft save-logs
UNRESOLVED: glibcs-hppa-linux-gnu check
UNRESOLVED: glibcs-i686-linux-gnu-disable-multi-arch configure
UNRESOLVED: glibcs-i586-linux-gnu mkdir-lib
FAIL: glibcs-m68k-linux-gnu-coldfire check-compilers
PASS: glibcs-hppa-linux-gnu save-logs
UNRESOLVED: glibcs-i686-linux-gnu configure
FAIL: glibcs-m68k-linux-gnu check-compilers
FAIL: glibcs-ia64-linux-gnu check-compilers
UNRESOLVED: glibcs-i686-linux-gnu-disable-multi-arch build
UNRESOLVED: glibcs-i586-linux-gnu check
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire rm
FAIL: glibcs-m68k-linux-gnu-coldfire-soft check-compilers
UNRESOLVED: glibcs-i686-linux-gnu-disable-multi-arch install
UNRESOLVED: glibcs-i686-linux-gnu build
UNRESOLVED: glibcs-m68k-linux-gnu rm
UNRESOLVED: glibcs-ia64-linux-gnu rm
PASS: glibcs-i586-linux-gnu save-logs
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire-soft rm
UNRESOLVED: glibcs-i686-linux-gnu-disable-multi-arch mkdir-lib
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire mkdir
UNRESOLVED: glibcs-m68k-linux-gnu mkdir
FAIL: glibcs-microblaze-linux-gnu check-compilers
UNRESOLVED: glibcs-i686-linux-gnu install
UNRESOLVED: glibcs-i686-linux-gnu-disable-multi-arch check
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire-soft mkdir
UNRESOLVED: glibcs-ia64-linux-gnu mkdir
UNRESOLVED: glibcs-i686-linux-gnu mkdir-lib
PASS: glibcs-i686-linux-gnu-disable-multi-arch save-logs
UNRESOLVED: glibcs-microblaze-linux-gnu rm
UNRESOLVED: glibcs-i686-linux-gnu check
FAIL: glibcs-microblazeel-linux-gnu check-compilers
UNRESOLVED: glibcs-microblaze-linux-gnu mkdir
PASS: glibcs-i686-linux-gnu save-logs
UNRESOLVED: glibcs-i686-linux-gnu-static-pie configure
UNRESOLVED: glibcs-m68k-linux-gnu configure
UNRESOLVED: glibcs-microblazeel-linux-gnu rm
UNRESOLVED: glibcs-m68k-linux-gnu build
FAIL: glibcs-mips-linux-gnu check-compilers
UNRESOLVED: glibcs-i686-linux-gnu-static-pie build
UNRESOLVED: glibcs-m68k-linux-gnu install
UNRESOLVED: glibcs-microblazeel-linux-gnu mkdirls
UNRESOLVED: glibcs-m68k-linux-gnu mkdir-lib
UNRESOLVED: glibcs-mips-linux-gnu rm
UNRESOLVED: glibcs-microblaze-linux-gnu configure
UNRESOLVED: glibcs-i686-linux-gnu-static-pie install
UNRESOLVED: glibcs-microblaze-linux-gnu build
UNRESOLVED: glibcs-m68k-linux-gnu check
UNRESOLVED: glibcs-mips-linux-gnu mkdir
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire-soft configure
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire configure
PASS: glibcs-m68k-linux-gnu save-logs
UNRESOLVED: glibcs-i686-linux-gnu-static-pie mkdir-lib
UNRESOLVED: glibcs-ia64-linux-gnu configure
FAIL: glibcs-mips-linux-gnu-nan2008 check-compilers
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire-soft build
UNRESOLVED: glibcs-ia64-linux-gnu build
UNRESOLVED: glibcs-microblaze-linux-gnu install
UNRESOLVED: glibcs-mips-linux-gnu-nan2008 rm
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire build
UNRESOLVED: glibcs-i686-linux-gnu-static-pie check
UNRESOLVED: glibcs-ia64-linux-gnu install
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire-soft install
PASS: glibcs-i686-linux-gnu-static-pie save-logs
UNRESOLVED: glibcs-microblaze-linux-gnu mkdir-lib
UNRESOLVED: glibcs-mips-linux-gnu-nan2008 mkdir
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire install
UNRESOLVED: glibcs-mips-linux-gnu configure
FAIL: glibcs-mips-linux-gnu-nan2008-soft check-compilers
UNRESOLVED: glibcs-mips-linux-gnu build
UNRESOLVED: glibcs-microblaze-linux-gnu check
UNRESOLVED: glibcs-ia64-linux-gnu mkdir-lib
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire-soft mkdir-lib
UNRESOLVED: glibcs-microblazeel-linux-gnu configure
UNRESOLVED: glibcs-mips-linux-gnu install
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire-soft check
PASS: glibcs-microblaze-linux-gnu save-logs
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire mkdir-lib
UNRESOLVED: glibcs-mips-linux-gnu-nan2008-soft rm
UNRESOLVED: glibcs-microblazeel-linux-gnu build
UNRESOLVED: glibcs-ia64-linux-gnu check
PASS: glibcs-m68k-linux-gnu-coldfire-soft save-logs
UNRESOLVED: glibcs-m68k-linux-gnu-coldfire check
FAIL: glibcs-mips-linux-gnu-soft check-compilers
FAIL: glibcs-mips64-linux-gnu-n32 check-compilers
UNRESOLVED: glibcs-mips-linux-gnu-nan2008-soft mkdir
PASS: glibcs-ia64-linux-gnu save-logs
PASS: glibcs-m68k-linux-gnu-coldfire save-logs
UNRESOLVED: glibcs-mips-linux-gnu mkdir-lib
UNRESOLVED: glibcs-microblazeel-linux-gnu install
UNRESOLVED: glibcs-microblazeel-linux-gnu mkdir-lib
FAIL: glibcs-mips64-linux-gnu-n32-nan2008 check-compilers
FAIL: glibcs-mips64-linux-gnu-n32-nan2008-soft check-compilers
UNRESOLVED: glibcs-mips-linux-gnu check
UNRESOLVED: glibcs-mips-linux-gnu-soft rm
UNRESOLVED: glibcs-mips64-linux-gnu-n32 rm
UNRESOLVED: glibcs-microblazeel-linux-gnu check
PASS: glibcs-microblazeel-linux-gnu save-logs
UNRESOLVED: glibcs-mips-linux-gnu-soft mkdir
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008 rm
PASS: glibcs-mips-linux-gnu save-logs
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008-soft rm
FAIL: glibcs-mips64-linux-gnu-n32-soft check-compilers
FAIL: glibcs-mips64-linux-gnu-n64 check-compilers
UNRESOLVED: glibcs-mips64-linux-gnu-n32-soft rm
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008-soft mkdir
UNRESOLVED: glibcs-mips64-linux-gnu-n32 mkdir
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008 mkdir
UNRESOLVED: glibcs-mips64-linux-gnu-n64 rm
UNRESOLVED: glibcs-mips64-linux-gnu-n32-soft mkdir
UNRESOLVED: glibcs-mips-linux-gnu-nan2008 configure
UNRESOLVED: glibcs-mips-linux-gnu-nan2008 build
UNRESOLVED: glibcs-mips-linux-gnu-nan2008-soft configure
UNRESOLVED: glibcs-mips-linux-gnu-nan2008 install
UNRESOLVED: glibcs-mips64-linux-gnu-n64 mkdir
UNRESOLVED: glibcs-mips-linux-gnu-nan2008 mkdir-lib
UNRESOLVED: glibcs-mips-linux-gnu-nan2008-soft build
UNRESOLVED: glibcs-mips-linux-gnu-nan2008 check
PASS: glibcs-mips-linux-gnu-nan2008 save-logs
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008 configure
FAIL: glibcs-mips64-linux-gnu-n64-nan2008 check-compilers
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008 build
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008 rm
UNRESOLVED: glibcs-mips-linux-gnu-nan2008-soft install
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008 install
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008 mkdir
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008 mkdir-lib
UNRESOLVED: glibcs-mips-linux-gnu-nan2008-soft mkdir-lib
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008 check
UNRESOLVED: glibcs-mips-linux-gnu-soft configure
UNRESOLVED: glibcs-mips-linux-gnu-nan2008-soft check
PASS: glibcs-mips64-linux-gnu-n32-nan2008 save-logs
PASS: glibcs-mips-linux-gnu-nan2008-soft save-logs
UNRESOLVED: glibcs-mips-linux-gnu-soft build
FAIL: glibcs-mips64-linux-gnu-n64-nan2008-soft check-compilers
UNRESOLVED: glibcs-mips64-linux-gnu-n32 configure
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008 configure
FAIL: glibcs-mips64-linux-gnu-n64-soft check-compilers
UNRESOLVED: glibcs-mips64-linux-gnu-n64 configure
UNRESOLVED: glibcs-mips64-linux-gnu-n64 build
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008-soft configure
UNRESOLVED: glibcs-mips64-linux-gnu-n32-soft configure
UNRESOLVED: glibcs-mips64-linux-gnu-n64-soft rm
UNRESOLVED: glibcs-mips64-linux-gnu-n32 build
UNRESOLVED: glibcs-mips-linux-gnu-soft install
UNRESOLVED: glibcs-mips64-linux-gnu-n64 install
UNRESOLVED: glibcs-mips64-linux-gnu-n64-soft mkdir
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008 build
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008-soft rm
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008-soft build
UNRESOLVED: glibcs-mips64-linux-gnu-n32-soft build
UNRESOLVED: glibcs-mips64-linux-gnu-n64 mkdir-lib
UNRESOLVED: glibcs-mips64-linux-gnu-n64 check
UNRESOLVED: glibcs-mips64-linux-gnu-n32-soft install
UNRESOLVED: glibcs-mips-linux-gnu-soft mkdir-lib
PASS: glibcs-mips64-linux-gnu-n64 save-logs
UNRESOLVED: glibcs-mips64-linux-gnu-n32 install
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008-soft install
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008 install
UNRESOLVED: glibcs-mips64-linux-gnu-n32 mkdir-lib
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008-soft mkdir
UNRESOLVED: glibcs-mips64-linux-gnu-n32-soft mkdir-lib
FAIL: glibcs-mips64el-linux-gnu-n32 check-compilers
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008-soft mkdir-lib
UNRESOLVED: glibcs-mips64-linux-gnu-n32 check
UNRESOLVED: glibcs-mips-linux-gnu-soft check
UNRESOLVED: glibcs-mips64-linux-gnu-n32-nan2008-soft check
PASS: glibcs-mips64-linux-gnu-n32 save-logs
PASS: glibcs-mips-linux-gnu-soft save-logs
PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft save-logs
FAIL: glibcs-mips64el-linux-gnu-n32-nan2008-soft check-compilers
UNRESOLVED: glibcs-mips64-linux-gnu-n32-soft check
FAIL: glibcs-mips64el-linux-gnu-n32-soft check-compilers
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008 mkdir-lib
UNRESOLVED: glibcs-mips64el-linux-gnu-n32 rm
FAIL: glibcs-mips64el-linux-gnu-n32-nan2008 check-compilers
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-soft rm
PASS: glibcs-mips64-linux-gnu-n32-soft save-logs
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008 rm
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008-soft rm
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008 check
UNRESOLVED: glibcs-mips64el-linux-gnu-n32 mkdir
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008 mkdir
PASS: glibcs-mips64-linux-gnu-n64-nan2008 save-logs
FAIL: glibcs-mips64el-linux-gnu-n64 check-compilers
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-soft mkdir
FAIL: glibcs-mips64el-linux-gnu-n64-nan2008 check-compilers
UNRESOLVED: glibcs-mips64el-linux-gnu-n64 rm
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008-soft mkdir
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008 rm
UNRESOLVED: glibcs-mips64el-linux-gnu-n64 mkdir
UNRESOLVED: glibcs-mips64-linux-gnu-n64-soft configure
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008 mkdir
UNRESOLVED: glibcs-mips64-linux-gnu-n64-soft build
UNRESOLVED: glibcs-mips64-linux-gnu-n64-soft install
UNRESOLVED: glibcs-mips64el-linux-gnu-n64 configure
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008 configure
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008-soft configure
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008 build
UNRESOLVED: glibcs-mips64-linux-gnu-n64-soft mkdir-lib
UNRESOLVED: glibcs-mips64el-linux-gnu-n64 build
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008 install
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008 configure
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008-soft build
UNRESOLVED: glibcs-mips64-linux-gnu-n64-soft check
UNRESOLVED: glibcs-mips64el-linux-gnu-n64 install
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64-linux-gnu-n64-soft save-logs
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008 mkdir-lib
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-soft configure
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008-soft install
UNRESOLVED: glibcs-mips64el-linux-gnu-n32 configure
UNRESOLVED: glibcs-mips64el-linux-gnu-n32 build
FAIL: glibcs-mips64el-linux-gnu-n64-nan2008-soft check-compilers
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008-soft configure
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008-soft mkdir-lib
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008 check
UNRESOLVED: glibcs-mips64el-linux-gnu-n32 install
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-soft build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008 save-logs
UNRESOLVED: glibcs-mips64el-linux-gnu-n64 mkdir-lib
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008 install
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008-soft rm
UNRESOLVED: glibcs-mips64-linux-gnu-n64-nan2008-soft check
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008-soft build
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008 mkdir-lib
UNRESOLVED: glibcs-mips64el-linux-gnu-n32 mkdir-lib
FAIL: glibcs-mips64el-linux-gnu-n64-soft check-compilers
UNRESOLVED: glibcs-mips64el-linux-gnu-n64 check
UNRESOLVED: glibcs-mips64el-linux-gnu-n32 check
PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft save-logs
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008-soft mkdir
PASS: glibcs-mips64el-linux-gnu-n64 save-logs
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-soft install
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008-soft install
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008 check
FAIL: glibcs-mipsel-linux-gnu-nan2008 check-compilers
PASS: glibcs-mips64el-linux-gnu-n32 save-logs
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008 rm
FAIL: glibcs-mipsel-linux-gnu check-compilers
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-soft rm
PASS: glibcs-mips64el-linux-gnu-n32-nan2008 save-logs
UNRESOLVED: glibcs-mipsel-linux-gnu rm
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008 mkdir
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-soft mkdir-lib
FAIL: glibcs-mipsel-linux-gnu-nan2008-soft check-compilers
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008-soft mkdir-lib
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-soft check
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-soft mkdir
FAIL: glibcs-mipsel-linux-gnu-soft check-compilers
UNRESOLVED: glibcs-mips64el-linux-gnu-n32-nan2008-soft check
PASS: glibcs-mips64el-linux-gnu-n32-soft save-logs
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008-soft rm
UNRESOLVED: glibcs-mipsel-linux-gnu mkdir
UNRESOLVED: glibcs-mipsel-linux-gnu-soft rm
FAIL: glibcs-mipsisa32r6el-linux-gnu check-compilers
PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft save-logs
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008-soft configure
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008-soft mkdir
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008-soft build
FAIL: glibcs-mipsisa64r6el-linux-gnu-n32 check-compilers
UNRESOLVED: glibcs-mipsel-linux-gnu-soft mkdir
UNRESOLVED: glibcs-mipsisa32r6el-linux-gnu rm
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008-soft install
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008 configure
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n32 rm
UNRESOLVED: glibcs-mipsisa32r6el-linux-gnu mkdir
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-soft configure
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008 build
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n32 mkdir
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-soft build
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008 install
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-soft install
UNRESOLVED: glibcs-mipsel-linux-gnu-soft configure
UNRESOLVED: glibcs-mipsel-linux-gnu-soft build
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n32 configure
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008 mkdir-lib
UNRESOLVED: glibcs-mipsel-linux-gnu-soft install
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n32 build
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008-soft mkdir-lib
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-soft mkdir-lib
UNRESOLVED: glibcs-mipsel-linux-gnu-soft mkdir-lib
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n32 install
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008 check
UNRESOLVED: glibcs-mipsel-linux-gnu configure
UNRESOLVED: glibcs-mipsel-linux-gnu-soft check
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-nan2008-soft check
UNRESOLVED: glibcs-mipsel-linux-gnu build
UNRESOLVED: glibcs-mips64el-linux-gnu-n64-soft check
PASS: glibcs-mipsel-linux-gnu-soft save-logs
PASS: glibcs-mipsel-linux-gnu-nan2008 save-logs
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n32 mkdir-lib
FAIL: glibcs-nios2-linux-gnu check-compilers
PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft save-logs
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008-soft configure
UNRESOLVED: glibcs-mipsel-linux-gnu install
PASS: glibcs-mips64el-linux-gnu-n64-soft save-logs
FAIL: glibcs-mipsisa64r6el-linux-gnu-n64 check-compilers
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008-soft build
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n32 check
FAIL: glibcs-powerpc-linux-gnu check-compilers
UNRESOLVED: glibcs-nios2-linux-gnu rm
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n64 rm
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008-soft install
FAIL: glibcs-powerpc-linux-gnu-power4 check-compilers
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n64 mkdir
PASS: glibcs-mipsisa64r6el-linux-gnu-n32 save-logs
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008-soft mkdir-lib
UNRESOLVED: glibcs-mipsel-linux-gnu mkdir-lib
UNRESOLVED: glibcs-mipsel-linux-gnu-nan2008-soft check
UNRESOLVED: glibcs-powerpc-linux-gnu rm
UNRESOLVED: glibcs-nios2-linux-gnu mkdir
PASS: glibcs-mipsel-linux-gnu-nan2008-soft save-logs
FAIL: glibcs-powerpc-linux-gnu-soft check-compilers
UNRESOLVED: glibcs-powerpc-linux-gnu-power4 rm
FAIL: glibcs-powerpc64-linux-gnu check-compilers
UNRESOLVED: glibcs-mipsel-linux-gnu check
UNRESOLVED: glibcs-mipsisa32r6el-linux-gnu configure
UNRESOLVED: glibcs-powerpc-linux-gnu mkdir
UNRESOLVED: glibcs-powerpc64-linux-gnu rm
UNRESOLVED: glibcs-mipsisa32r6el-linux-gnu build
PASS: glibcs-mipsel-linux-gnu save-logs
UNRESOLVED: glibcs-powerpc-linux-gnu-soft rm
UNRESOLVED: glibcs-powerpc-linux-gnu-power4 mkdir
FAIL: glibcs-powerpc64le-linux-gnu check-compilers
UNRESOLVED: glibcs-powerpc64-linux-gnu mkdir
UNRESOLVED: glibcs-powerpc-linux-gnu-soft mkdir
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n64 configure
UNRESOLVED: glibcs-mipsisa32r6el-linux-gnu install
UNRESOLVED: glibcs-powerpc64le-linux-gnu rm
UNRESOLVED: glibcs-powerpc-linux-gnu configure
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n64 build
UNRESOLVED: glibcs-mipsisa32r6el-linux-gnu mkdir-lib
UNRESOLVED: glibcs-powerpc-linux-gnu build
UNRESOLVED: glibcs-mipsisa32r6el-linux-gnu check
UNRESOLVED: glibcs-powerpc64le-linux-gnu mkdir
PASS: glibcs-mipsisa32r6el-linux-gnu save-logs
UNRESOLVED: glibcs-nios2-linux-gnu configure
UNRESOLVED: glibcs-nios2-linux-gnu build
FAIL: glibcs-powerpc64le-linux-gnu-disable-multi-arch check-compilers
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n64 install
UNRESOLVED: glibcs-powerpc64le-linux-gnu-disable-multi-arch rm
UNRESOLVED: glibcs-nios2-linux-gnu install
UNRESOLVED: glibcs-powerpc-linux-gnu install
UNRESOLVED: glibcs-powerpc64le-linux-gnu-disable-multi-arch mkdir
UNRESOLVED: glibcs-nios2-linux-gnu mkdir-lib
UNRESOLVED: glibcs-nios2-linux-gnu check
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n64 mkdir-lib
PASS: glibcs-nios2-linux-gnu save-logs
UNRESOLVED: glibcs-powerpc-linux-gnu mkdir-lib
UNRESOLVED: glibcs-powerpc64-linux-gnu configure
UNRESOLVED: glibcs-mipsisa64r6el-linux-gnu-n64 check
UNRESOLVED: glibcs-powerpc-linux-gnu-power4 configure
FAIL: glibcs-riscv32-linux-gnu-rv32imac-ilp32 check-compilers
UNRESOLVED: glibcs-powerpc64-linux-gnu build
UNRESOLVED: glibcs-powerpc-linux-gnu check
PASS: glibcs-mipsisa64r6el-linux-gnu-n64 save-logs
UNRESOLVED: glibcs-powerpc64-linux-gnu install
UNRESOLVED: glibcs-powerpc-linux-gnu-power4 build
PASS: glibcs-powerpc-linux-gnu save-logs
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imac-ilp32 rm
UNRESOLVED: glibcs-powerpc64-linux-gnu mkdir-lib
UNRESOLVED: glibcs-powerpc-linux-gnu-soft configure
FAIL: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32 check-compilers
UNRESOLVED: glibcs-powerpc64le-linux-gnu-disable-multi-arch configure
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imac-ilp32 mkdir
FAIL: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32d check-compilers
UNRESOLVED: glibcs-powerpc-linux-gnu-power4 install
UNRESOLVED: glibcs-powerpc-linux-gnu-soft build
UNRESOLVED: glibcs-powerpc64-linux-gnu check
UNRESOLVED: glibcs-powerpc64le-linux-gnu-disable-multi-arch build
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32d rm
UNRESOLVED: glibcs-powerpc64le-linux-gnu configure
PASS: glibcs-powerpc64-linux-gnu save-logs
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32 rm
UNRESOLVED: glibcs-powerpc-linux-gnu-soft install
UNRESOLVED: glibcs-powerpc64le-linux-gnu-disable-multi-arch install
UNRESOLVED: glibcs-powerpc-linux-gnu-soft mkdir-lib
UNRESOLVED: glibcs-powerpc64le-linux-gnu build
UNRESOLVED: glibcs-powerpc64le-linux-gnu-disable-multi-arch mkdir-lib
UNRESOLVED: glibcs-powerpc-linux-gnu-power4 mkdir-lib
FAIL: glibcs-riscv64-linux-gnu-rv64imac-lp64 check-compilers
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32d mkdir
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32 mkdir
UNRESOLVED: glibcs-powerpc-linux-gnu-power4 check
UNRESOLVED: glibcs-powerpc64le-linux-gnu-disable-multi-arch check
UNRESOLVED: glibcs-powerpc-linux-gnu-soft check
UNRESOLVED: glibcs-powerpc64le-linux-gnu install
PASS: glibcs-powerpc-linux-gnu-soft save-logs
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imac-lp64 rm
PASS: glibcs-powerpc-linux-gnu-power4 save-logs
PASS: glibcs-powerpc64le-linux-gnu-disable-multi-arch save-logs
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imac-lp64 mkdir
FAIL: glibcs-riscv64-linux-gnu-rv64imafdc-lp64 check-compilers
FAIL: glibcs-riscv64-linux-gnu-rv64imafdc-lp64d check-compilers
FAIL: glibcs-s390-linux-gnu check-compilers
UNRESOLVED: glibcs-powerpc64le-linux-gnu mkdir-lib
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64 rm
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64d rm
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32d configure
UNRESOLVED: glibcs-s390-linux-gnu rm
UNRESOLVED: glibcs-powerpc64le-linux-gnu check
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64d mkdir
UNRESOLVED: glibcs-s390-linux-gnu mkdir
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32d build
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64 mkdir
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imac-lp64 configure
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imac-ilp32 configure
PASS: glibcs-powerpc64le-linux-gnu save-logs
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imac-lp64 build
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32 configure
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imac-ilp32 build
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32 build
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32d install
FAIL: glibcs-s390x-linux-gnu check-compilers
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imac-lp64 install
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32 install
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32 mkdir-lib
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imac-ilp32 install
UNRESOLVED: glibcs-s390x-linux-gnu rm
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32d mkdir-lib
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imac-lp64 mkdir-lib
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32 check
PASS: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32 save-logs
UNRESOLVED: glibcs-s390x-linux-gnu mkdir
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imac-ilp32 mkdir-lib
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32d check
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imac-lp64 check
FAIL: glibcs-s390x-linux-gnu-O3 check-compilers
UNRESOLVED: glibcs-riscv32-linux-gnu-rv32imac-ilp32 check
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64 configure
PASS: glibcs-riscv64-linux-gnu-rv64imac-lp64 save-logs
UNRESOLVED: glibcs-s390x-linux-gnu-O3 rm
PASS: glibcs-riscv32-linux-gnu-rv32imafdc-ilp32d save-logs
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64d configure
PASS: glibcs-riscv32-linux-gnu-rv32imac-ilp32 save-logs
UNRESOLVED: glibcs-s390-linux-gnu configure
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64 build
UNRESOLVED: glibcs-s390x-linux-gnu-O3 mkdir
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64d build
FAIL: glibcs-sh3eb-linux-gnu check-compilers
UNRESOLVED: glibcs-sh3eb-linux-gnu rm
UNRESOLVED: glibcs-s390-linux-gnu build
FAIL: glibcs-sh3-linux-gnu check-compilers
FAIL: glibcs-sh4-linux-gnu check-compilers
UNRESOLVED: glibcs-sh3-linux-gnu rm
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64 install
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64d install
UNRESOLVED: glibcs-sh3-linux-gnu mkdir
UNRESOLVED: glibcs-sh3eb-linux-gnu mkdir
UNRESOLVED: glibcs-sh4-linux-gnu rm
UNRESOLVED: glibcs-s390-linux-gnu install
UNRESOLVED: glibcs-s390x-linux-gnu configure
UNRESOLVED: glibcs-sh4-linux-gnu mkdir
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64d mkdir-lib
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64 mkdir-lib
UNRESOLVED: glibcs-s390x-linux-gnu build
UNRESOLVED: glibcs-s390-linux-gnu mkdir-lib
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64 check
UNRESOLVED: glibcs-riscv64-linux-gnu-rv64imafdc-lp64d check
UNRESOLVED: glibcs-s390x-linux-gnu install
UNRESOLVED: glibcs-s390x-linux-gnu-O3 configure
UNRESOLVED: glibcs-s390x-linux-gnu-O3 build
PASS: glibcs-riscv64-linux-gnu-rv64imafdc-lp64d save-logs
UNRESOLVED: glibcs-s390-linux-gnu check
PASS: glibcs-riscv64-linux-gnu-rv64imafdc-lp64 save-logs
UNRESOLVED: glibcs-s390x-linux-gnu-O3 install
UNRESOLVED: glibcs-sh3-linux-gnu configure
PASS: glibcs-s390-linux-gnu save-logs
FAIL: glibcs-sh4eb-linux-gnu check-compilers
FAIL: glibcs-sh4-linux-gnu-soft check-compilers
UNRESOLVED: glibcs-s390x-linux-gnu mkdir-lib
FAIL: glibcs-sh4eb-linux-gnu-soft check-compilers
UNRESOLVED: glibcs-sh3-linux-gnu build
UNRESOLVED: glibcs-s390x-linux-gnu-O3 mkdir-lib
UNRESOLVED: glibcs-sh4eb-linux-gnu rm
UNRESOLVED: glibcs-sh4-linux-gnu-soft rm
UNRESOLVED: glibcs-sh4eb-linux-gnu mkdir
UNRESOLVED: glibcs-sh4-linux-gnu-soft mkdir
UNRESOLVED: glibcs-s390x-linux-gnu-O3 check
UNRESOLVED: glibcs-s390x-linux-gnu check
UNRESOLVED: glibcs-sh4eb-linux-gnu-soft rm
UNRESOLVED: glibcs-sh3-linux-gnu install
UNRESOLVED: glibcs-sh3-linux-gnu mkdir-lib
UNRESOLVED: glibcs-sh3eb-linux-gnu configure
PASS: glibcs-s390x-linux-gnu save-logs
UNRESOLVED: glibcs-sh3-linux-gnu check
UNRESOLVED: glibcs-sh3eb-linux-gnu build
UNRESOLVED: glibcs-sh4-linux-gnu configure
PASS: glibcs-sh3-linux-gnu save-logs
PASS: glibcs-s390x-linux-gnu-O3 save-logs
UNRESOLVED: glibcs-sh4eb-linux-gnu-soft mkdir
FAIL: glibcs-sparc64-linux-gnu-disable-multi-arch check-compilers
FAIL: glibcs-sparc64-linux-gnu check-compilers
UNRESOLVED: glibcs-sh4-linux-gnu build
UNRESOLVED: glibcs-sh3eb-linux-gnu install
FAIL: glibcs-sparcv8-linux-gnu-leon3 check-compilers
UNRESOLVED: glibcs-sparc64-linux-gnu-disable-multi-arch rm
UNRESOLVED: glibcs-sparc64-linux-gnu rm
UNRESOLVED: glibcs-sparcv8-linux-gnu-leon3 rm
UNRESOLVED: glibcs-sh3eb-linux-gnu mkdir-lib
UNRESOLVED: glibcs-sh4-linux-gnu install
UNRESOLVED: glibcs-sh4-linux-gnu-soft configure
UNRESOLVED: glibcs-sparc64-linux-gnu mkdir
UNRESOLVED: glibcs-sparc64-linux-gnu-disable-multi-arch mkdir
UNRESOLVED: glibcs-sh4eb-linux-gnu configure
UNRESOLVED: glibcs-sh4-linux-gnu-soft build
UNRESOLVED: glibcs-sh3eb-linux-gnu check
UNRESOLVED: glibcs-sparcv8-linux-gnu-leon3 mkdir
UNRESOLVED: glibcs-sh4-linux-gnu-soft install
UNRESOLVED: glibcs-sh4eb-linux-gnu build
UNRESOLVED: glibcs-sh4-linux-gnu mkdir-lib
PASS: glibcs-sh3eb-linux-gnu save-logs
UNRESOLVED: glibcs-sh4-linux-gnu-soft mkdir-lib
UNRESOLVED: glibcs-sh4-linux-gnu-soft check
UNRESOLVED: glibcs-sh4-linux-gnu check
PASS: glibcs-sh4-linux-gnu-soft save-logs
UNRESOLVED: glibcs-sh4eb-linux-gnu install
FAIL: glibcs-sparcv9-linux-gnu check-compilers
UNRESOLVED: glibcs-sh4eb-linux-gnu mkdir-lib
UNRESOLVED: glibcs-sparc64-linux-gnu configure
PASS: glibcs-sh4-linux-gnu save-logs
FAIL: glibcs-sparcv9-linux-gnu-disable-multi-arch check-compilers
UNRESOLVED: glibcs-sparc64-linux-gnu build
UNRESOLVED: glibcs-sh4eb-linux-gnu check
UNRESOLVED: glibcs-sparcv9-linux-gnu-disable-multi-arch rm
UNRESOLVED: glibcs-sparcv9-linux-gnu rm
FAIL: glibcs-x86_64-linux-gnu check-compilers
PASS: glibcs-sh4eb-linux-gnu save-logs
UNRESOLVED: glibcs-sparc64-linux-gnu install
FAIL: glibcs-x86_64-linux-gnu-disable-multi-arch check-compilers
UNRESOLVED: glibcs-sparcv9-linux-gnu mkdir
UNRESOLVED: glibcs-sparcv9-linux-gnu-disable-multi-arch mkdir
UNRESOLVED: glibcs-sh4eb-linux-gnu-soft configure
UNRESOLVED: glibcs-x86_64-linux-gnu rm
UNRESOLVED: glibcs-sparc64-linux-gnu mkdir-lib
UNRESOLVED: glibcs-sparc64-linux-gnu check
UNRESOLVED: glibcs-sh4eb-linux-gnu-soft build
UNRESOLVED: glibcs-x86_64-linux-gnu-disable-multi-arch rm
UNRESOLVED: glibcs-x86_64-linux-gnu mkdir
PASS: glibcs-sparc64-linux-gnu save-logs
UNRESOLVED: glibcs-sparc64-linux-gnu-disable-multi-arch configure
UNRESOLVED: glibcs-sh4eb-linux-gnu-soft install
UNRESOLVED: glibcs-sparc64-linux-gnu-disable-multi-arch build
UNRESOLVED: glibcs-sh4eb-linux-gnu-soft mkdir-lib
UNRESOLVED: glibcs-x86_64-linux-gnu-disable-multi-arch mkdir
UNRESOLVED: glibcs-sparc64-linux-gnu-disable-multi-arch install
UNRESOLVED: glibcs-sh4eb-linux-gnu-soft check
UNRESOLVED: glibcs-sparcv8-linux-gnu-leon3 configure
FAIL: glibcs-x86_64-linux-gnu-minimal check-compilers
UNRESOLVED: glibcs-sparcv8-linux-gnu-leon3 build
PASS: glibcs-sh4eb-linux-gnu-soft save-logs
FAIL: glibcs-x86_64-linux-gnu-static-pie check-compilers
UNRESOLVED: glibcs-sparcv8-linux-gnu-leon3 install
UNRESOLVED: glibcs-x86_64-linux-gnu-static-pie rm
UNRESOLVED: glibcs-sparc64-linux-gnu-disable-multi-arch mkdir-lib
UNRESOLVED: glibcs-sparcv8-linux-gnu-leon3 mkdir-lib
UNRESOLVED: glibcs-x86_64-linux-gnu-static-pie mkdir
UNRESOLVED: glibcs-x86_64-linux-gnu-minimal rm
UNRESOLVED: glibcs-sparcv8-linux-gnu-leon3 check
PASS: glibcs-sparcv8-linux-gnu-leon3 save-logs
UNRESOLVED: glibcs-sparc64-linux-gnu-disable-multi-arch check
FAIL: glibcs-x86_64-linux-gnu-x32 check-compilers
UNRESOLVED: glibcs-x86_64-linux-gnu-x32 rm
PASS: glibcs-sparc64-linux-gnu-disable-multi-arch save-logs
UNRESOLVED: glibcs-x86_64-linux-gnu-x32 mkdir
UNRESOLVED: glibcs-x86_64-linux-gnu-minimal mkdir
FAIL: glibcs-x86_64-linux-gnu-x32-static-pie check-compilers
UNRESOLVED: glibcs-sparcv9-linux-gnu configure
UNRESOLVED: glibcs-sparcv9-linux-gnu-disable-multi-arch configure
UNRESOLVED: glibcs-x86_64-linux-gnu-static-pie configure
UNRESOLVED: glibcs-sparcv9-linux-gnu build
UNRESOLVED: glibcs-x86_64-linux-gnu-disable-multi-arch configure
UNRESOLVED: glibcs-x86_64-linux-gnu-x32-static-pie rm
UNRESOLVED: glibcs-x86_64-linux-gnu-disable-multi-arch build
UNRESOLVED: glibcs-sparcv9-linux-gnu-disable-multi-arch build
UNRESOLVED: glibcs-x86_64-linux-gnu-static-pie build
UNRESOLVED: glibcs-x86_64-linux-gnu-x32-static-pie mkdir
UNRESOLVED: glibcs-sparcv9-linux-gnu-disable-multi-arch install
UNRESOLVED: glibcs-x86_64-linux-gnu configure
UNRESOLVED: glibcs-sparcv9-linux-gnu-disable-multi-arch mkdir-lib
UNRESOLVED: glibcs-x86_64-linux-gnu-disable-multi-arch install
UNRESOLVED: glibcs-sparcv9-linux-gnu install
UNRESOLVED: glibcs-sparcv9-linux-gnu-disable-multi-arch check
UNRESOLVED: glibcs-x86_64-linux-gnu build
UNRESOLVED: glibcs-x86_64-linux-gnu install
UNRESOLVED: glibcs-x86_64-linux-gnu-static-pie install
PASS: glibcs-sparcv9-linux-gnu-disable-multi-arch save-logs
UNRESOLVED: glibcs-x86_64-linux-gnu-x32 configure
UNRESOLVED: glibcs-x86_64-linux-gnu mkdir-lib
UNRESOLVED: glibcs-x86_64-linux-gnu-disable-multi-arch mkdir-lib
UNRESOLVED: glibcs-sparcv9-linux-gnu mkdir-lib
UNRESOLVED: glibcs-x86_64-linux-gnu-x32 build
UNRESOLVED: glibcs-x86_64-linux-gnu-static-pie mkdir-lib
UNRESOLVED: glibcs-x86_64-linux-gnu check
UNRESOLVED: glibcs-x86_64-linux-gnu-static-pie check
UNRESOLVED: glibcs-x86_64-linux-gnu-disable-multi-arch check
UNRESOLVED: glibcs-sparcv9-linux-gnu check
UNRESOLVED: glibcs-x86_64-linux-gnu-x32 install
PASS: glibcs-x86_64-linux-gnu save-logs
PASS: glibcs-x86_64-linux-gnu-static-pie save-logs
UNRESOLVED: glibcs-x86_64-linux-gnu-x32-static-pie configure
PASS: glibcs-sparcv9-linux-gnu save-logs
UNRESOLVED: glibcs-x86_64-linux-gnu-x32-static-pie build
PASS: glibcs-x86_64-linux-gnu-disable-multi-arch save-logs
UNRESOLVED: glibcs-x86_64-linux-gnu-x32 mkdir-lib
UNRESOLVED: glibcs-x86_64-linux-gnu-x32-static-pie install
UNRESOLVED: glibcs-x86_64-linux-gnu-x32 check
UNRESOLVED: glibcs-x86_64-linux-gnu-minimal configure
PASS: glibcs-x86_64-linux-gnu-x32 save-logs
UNRESOLVED: glibcs-x86_64-linux-gnu-x32-static-pie mkdir-lib
UNRESOLVED: glibcs-x86_64-linux-gnu-minimal build
UNRESOLVED: glibcs-x86_64-linux-gnu-x32-static-pie check
UNRESOLVED: glibcs-x86_64-linux-gnu-minimal install
PASS: glibcs-x86_64-linux-gnu-x32-static-pie save-logs
UNRESOLVED: glibcs-x86_64-linux-gnu-minimal mkdir-lib
UNRESOLVED: glibcs-x86_64-linux-gnu-minimal check
PASS: glibcs-x86_64-linux-gnu-minimal save-logs
```
> Thanks,
> Florian
>
>
* Noah Goldstein:
> And yet the build failes with the indicated error?
>
> Could you check what as/config.h contains? This is very odd.
>
> /* Define to 1 if you want to generate ELF common symbols with the STT_COMMON
> type by default. */
> #define DEFAULT_GENERATE_ELF_STT_COMMON 0
>
> is in gas/config.h
>
> Include tar file of all logs for the build.
I must say I'm stumped, sorry.
Do you use ccache? NFS or some other unusual file system?
I remember seeing something like that before, but I can't remember what
the cause was and what I did to fix it.
Ohhhh, wait, is . on your path by any chance?
Thanks,
Florian
On Mon, Sep 27, 2021 at 1:56 PM Florian Weimer <fweimer@redhat.com> wrote:
>
> * Noah Goldstein:
>
> > And yet the build failes with the indicated error?
> >
> > Could you check what as/config.h contains? This is very odd.
> >
> > /* Define to 1 if you want to generate ELF common symbols with the STT_COMMON
> > type by default. */
> > #define DEFAULT_GENERATE_ELF_STT_COMMON 0
> >
> > is in gas/config.h
> >
> > Include tar file of all logs for the build.
>
> I must say I'm stumped, sorry.
No problem. Thank you for taking the time!
>
> Do you use ccache? NFS or some other unusual file system?
Using ext4:
/dev/nvme0n1p4 ext4
>
> I remember seeing something like that before, but I can't remember what
> the cause was and what I did to fix it.
>
> Ohhhh, wait, is . on your path by any chance?
"." is not a complete anywhere path but shows up for example in:
/home/noah/.local/bin
Could the issue be related to LD_LIBRARY_PATH picking up something
from my system maybe?
>
> Thanks,
> Florian
>
* Noah Goldstein:
>> I remember seeing something like that before, but I can't remember what
>> the cause was and what I did to fix it.
>>
>> Ohhhh, wait, is . on your path by any chance?
>
> "." is not a complete anywhere path but shows up for example in:
> /home/noah/.local/bin
Hmm, okay, and that failure is during the gcc stage.
> Could the issue be related to LD_LIBRARY_PATH picking up something
> from my system maybe?
Seem unlikely, but possible. Looking at the environment settings is
probably a good idea.
Have you installed any compiler wrappers, e.g. ccache, or hardening
wrappers?
You could also take this command:
depbase=`echo as.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; gcc -DHAVE_CONFIG_H -I. -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas -I. -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas -I../bfd -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/config -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/../include -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/.. -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/../bfd -DLOCALEDIR="\"/home/noah/programs/opensource/glibc-dev/build-many/install/compilers/x86_64-linux-gnu/share/locale\"" -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Werror -Wwrite-strings -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/../zlib -g -O2 -MT as.o -MD -MP -MF $depbase.Tpo -c -o as.o /home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.c
add --save-temps, and invoke it in the directory
/home/noah/programs/opensource/glibc-dev/build-many/build/compilers/x86_64-linux-gnu/binutils/gas.
This should produce an as.i file, and from the # lines in it, it should
be possible to glean from where the config.h file actually used comes
from. Or perhaps use the -H option and hope that the include nesting
reveals what's going on.
Thanks,
Florian
On Mon, Sep 27, 2021 at 2:34 PM Florian Weimer <fweimer@redhat.com> wrote:
>
> * Noah Goldstein:
>
> >> I remember seeing something like that before, but I can't remember what
> >> the cause was and what I did to fix it.
> >>
> >> Ohhhh, wait, is . on your path by any chance?
> >
> > "." is not a complete anywhere path but shows up for example in:
> > /home/noah/.local/bin
>
> Hmm, okay, and that failure is during the gcc stage.
>
> > Could the issue be related to LD_LIBRARY_PATH picking up something
> > from my system maybe?
>
> Seem unlikely, but possible. Looking at the environment settings is
> probably a good idea.
>
> Have you installed any compiler wrappers, e.g. ccache, or hardening
> wrappers?
No.
>
> You could also take this command:
>
> depbase=`echo as.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; gcc -DHAVE_CONFIG_H -I. -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas -I. -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas -I../bfd -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/config -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/../include -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/.. -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/../bfd -DLOCALEDIR="\"/home/noah/programs/opensource/glibc-dev/build-many/install/compilers/x86_64-linux-gnu/share/locale\"" -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Werror -Wwrite-strings -I/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/../zlib -g -O2 -MT as.o -MD -MP -MF $depbase.Tpo -c -o as.o /home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.c
>
> add --save-temps, and invoke it in the directory
> /home/noah/programs/opensource/glibc-dev/build-many/build/compilers/x86_64-linux-gnu/binutils/gas.
> This should produce an as.i file, and from the # lines in it, it should
> be possible to glean from where the config.h file actually used comes
> from. Or perhaps use the -H option and hope that the include nesting
> reveals what's going on.
From as.i
# 0 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.c"
# 1 "/home/noah/programs/opensource/glibc-dev/build-many/build/compilers/x86_64-linux-gnu/binutils/gas//"
# 0 "<built-in>"
# 0 "<command-line>"
# 1 "/usr/include/stdc-predef.h" 1 3 4
# 0 "<command-line>" 2
# 1 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.c"
# 38 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.c"
# 1 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.h"
1
# 37 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.h"
# 1 "../bfd/config.h" 1
# 38 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.h"
2
Seems to be using "../bfd/config.h
Which does not contain a define for DEFAULT_GENERATE_ELF_STT_COMMON
>
> Thanks,
> Florian
>
* Noah Goldstein:
> From as.i
>
> # 0 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.c"
> # 1 "/home/noah/programs/opensource/glibc-dev/build-many/build/compilers/x86_64-linux-gnu/binutils/gas//"
> # 0 "<built-in>"
> # 0 "<command-line>"
> # 1 "/usr/include/stdc-predef.h" 1 3 4
> # 0 "<command-line>" 2
> # 1 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.c"
> # 38 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.c"
> # 1 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.h"
> 1
> # 37 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.h"
> # 1 "../bfd/config.h" 1
The above corresponds to this source line: #include "config.h"
> # 38 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.h"
> 2
>
> Seems to be using "../bfd/config.h
>
> Which does not contain a define for DEFAULT_GENERATE_ELF_STT_COMMON
Right, that's wrong. We saw something like this before:
<https://sourceware.org/legacy-ml/gdb-patches/2020-01/msg00417.html>
But the command line seems to be right this time: -I. should pick up
/home/noah/programs/opensource/glibc-dev/build-many/build/compilers/x86_64-linux-gnu/binutils/gas/config.h
which hopefully exists on your system.
I still haven't got a clue what is going on here.
Florian
On Mon, Sep 27, 2021 at 2:59 PM Florian Weimer <fweimer@redhat.com> wrote:
>
> * Noah Goldstein:
>
> > From as.i
> >
> > # 0 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.c"
> > # 1 "/home/noah/programs/opensource/glibc-dev/build-many/build/compilers/x86_64-linux-gnu/binutils/gas//"
> > # 0 "<built-in>"
> > # 0 "<command-line>"
> > # 1 "/usr/include/stdc-predef.h" 1 3 4
> > # 0 "<command-line>" 2
> > # 1 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.c"
> > # 38 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.c"
> > # 1 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.h"
> > 1
> > # 37 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.h"
> > # 1 "../bfd/config.h" 1
>
> The above corresponds to this source line: #include "config.h"
>
> > # 38 "/home/noah/programs/opensource/glibc-dev/build-many/src/binutils/gas/as.h"
> > 2
> >
> > Seems to be using "../bfd/config.h
> >
> > Which does not contain a define for DEFAULT_GENERATE_ELF_STT_COMMON
>
> Right, that's wrong. We saw something like this before:
>
> <https://sourceware.org/legacy-ml/gdb-patches/2020-01/msg00417.html>
>
> But the command line seems to be right this time: -I. should pick up
>
> /home/noah/programs/opensource/glibc-dev/build-many/build/compilers/x86_64-linux-gnu/binutils/gas/config.h
>
> which hopefully exists on your system.
It does.
>
> I still haven't got a clue what is going on here.
:/
Either way, thank you for the help!
I'm gunna post the patch w.o fully build-many-glibcs.py tests.
>
> Florian
>
* Noah Goldstein:
> I'm gunna post the patch w.o fully build-many-glibcs.py tests.
Right. I can run it through the build for you, I've still got a lab
machine checked out.
Florian
On Mon, Sep 27, 2021 at 3:24 PM Florian Weimer <fweimer@redhat.com> wrote:
>
> * Noah Goldstein:
>
> > I'm gunna post the patch w.o fully build-many-glibcs.py tests.
>
> Right. I can run it through the build for you, I've still got a lab
> machine checked out.
Thanks :)
I just posted the patch.
>
> Florian
>
On Mon, Sep 27, 2021 at 3:38 PM Noah Goldstein <goldstein.w.n@gmail.com> wrote:
>
> On Mon, Sep 27, 2021 at 3:24 PM Florian Weimer <fweimer@redhat.com> wrote:
> >
> > * Noah Goldstein:
> >
> > > I'm gunna post the patch w.o fully build-many-glibcs.py tests.
> >
> > Right. I can run it through the build for you, I've still got a lab
> > machine checked out.
>
> Thanks :)
>
> I just posted the patch.
> >
> > Florian
> >
Figured it out.
I had $C_INCLUDE_PATH as ":" instead of unset.
See PASS for build now :)
Thank you for your help!
I'll run the ABI tests overnight.
Will:
$> python3 src/glibc/scripts/build-many-glibcs.py build-many/ checkout
gcc-vcs-11; echo "Host Libraries"; python3
src/glibc/scripts/build-many-glibcs.py build-many host-libraries
--keep=failed; echo "Compilers"; python3
src/glibc/scripts/build-many-glibcs.py build-many compilers
x86_64-linux-gnu --keep=failed; python3
src/glibc/scripts/build-many-glibcs.py build-many glibcs --keep=failed
be sufficient to test all GLIBC abi builds?
@@ -47,7 +47,7 @@ bench := $(foreach B,$(filter bench-%,${BENCHSET}), ${${B}})
endif
# String function benchmarks.
-string-benchset := memccpy memchr memcmp memcpy memmem memmove \
+string-benchset := bcmp memccpy memchr memcmp memcpy memmem memmove \
mempcpy memset rawmemchr stpcpy stpncpy strcasecmp strcasestr \
strcat strchr strchrnul strcmp strcpy strcspn strlen \
strncasecmp strncat strncmp strncpy strnlen strpbrk strrchr \
new file mode 100644
@@ -0,0 +1,20 @@
+/* Measure bcmp functions.
+ Copyright (C) 2015-2021 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <https://www.gnu.org/licenses/>. */
+
+#define TEST_BCMP 1
+#include "bench-memcmp.c"
@@ -17,7 +17,9 @@
<https://www.gnu.org/licenses/>. */
#define TEST_MAIN
-#ifdef WIDE
+#ifdef TEST_BCMP
+# define TEST_NAME "bcmp"
+#elif defined WIDE
# define TEST_NAME "wmemcmp"
#else
# define TEST_NAME "memcmp"
@@ -35,7 +35,7 @@ routines := strcat strchr strcmp strcoll strcpy strcspn \
strncat strncmp strncpy \
strrchr strpbrk strsignal strspn strstr strtok \
strtok_r strxfrm memchr memcmp memmove memset \
- mempcpy bcopy bzero ffs ffsll stpcpy stpncpy \
+ mempcpy bcmp bcopy bzero ffs ffsll stpcpy stpncpy \
strcasecmp strncase strcasecmp_l strncase_l \
memccpy memcpy wordcopy strsep strcasestr \
swab strfry memfrob memmem rawmemchr strchrnul \
@@ -52,7 +52,7 @@ strop-tests := memchr memcmp memcpy memmove mempcpy memset memccpy \
stpcpy stpncpy strcat strchr strcmp strcpy strcspn \
strlen strncmp strncpy strpbrk strrchr strspn memmem \
strstr strcasestr strnlen strcasecmp strncasecmp \
- strncat rawmemchr strchrnul bcopy bzero memrchr \
+ strncat rawmemchr strchrnul bcmp bcopy bzero memrchr \
explicit_bzero
tests := tester inl-tester noinl-tester testcopy test-ffs \
tst-strlen stratcliff tst-svc tst-inlcall \
new file mode 100644
@@ -0,0 +1,21 @@
+/* Test and measure bcmp functions.
+ Copyright (C) 2012-2021 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <https://www.gnu.org/licenses/>. */
+
+#define BAD_RESULT(result, expec) ((!(result)) != (!(expec)))
+#define TEST_BCMP 1
+#include "test-memcmp.c"
@@ -17,11 +17,14 @@
<https://www.gnu.org/licenses/>. */
#define TEST_MAIN
-#ifdef WIDE
+#ifdef TEST_BCMP
+# define TEST_NAME "bcmp"
+#elif defined WIDE
# define TEST_NAME "wmemcmp"
#else
# define TEST_NAME "memcmp"
#endif
+
#include "test-string.h"
#ifdef WIDE
# include <inttypes.h>
@@ -35,6 +38,7 @@
# define CHARBYTES 4
# define CHAR__MIN WCHAR_MIN
# define CHAR__MAX WCHAR_MAX
+
int
simple_wmemcmp (const wchar_t *s1, const wchar_t *s2, size_t n)
{
@@ -48,8 +52,11 @@ simple_wmemcmp (const wchar_t *s1, const wchar_t *s2, size_t n)
}
#else
# include <limits.h>
-
-# define MEMCMP memcmp
+# ifdef TEST_BCMP
+# define MEMCMP bcmp
+# else
+# define MEMCMP memcmp
+# endif
# define MEMCPY memcpy
# define SIMPLE_MEMCMP simple_memcmp
# define CHAR char
@@ -69,6 +76,12 @@ simple_memcmp (const char *s1, const char *s2, size_t n)
}
#endif
+# ifndef BAD_RESULT
+# define BAD_RESULT(result, expec) \
+ (((result) == 0 && (expec)) || ((result) < 0 && (expec) >= 0) || \
+ ((result) > 0 && (expec) <= 0))
+# endif
+
typedef int (*proto_t) (const CHAR *, const CHAR *, size_t);
IMPL (SIMPLE_MEMCMP, 0)
@@ -79,9 +92,7 @@ check_result (impl_t *impl, const CHAR *s1, const CHAR *s2, size_t len,
int exp_result)
{
int result = CALL (impl, s1, s2, len);
- if ((exp_result == 0 && result != 0)
- || (exp_result < 0 && result >= 0)
- || (exp_result > 0 && result <= 0))
+ if (BAD_RESULT(result, exp_result))
{
error (0, 0, "Wrong result in function %s %d %d", impl->name,
result, exp_result);
@@ -186,9 +197,7 @@ do_random_tests (void)
{
r = CALL (impl, (CHAR *) p1 + align1, (const CHAR *) p2 + align2,
len);
- if ((r == 0 && result)
- || (r < 0 && result >= 0)
- || (r > 0 && result <= 0))
+ if (BAD_RESULT(r, result))
{
error (0, 0, "Iteration %zd - wrong result in function %s (%zd, %zd, %zd, %zd) %ld != %d, p1 %p p2 %p",
n, impl->name, align1 * CHARBYTES & 63, align2 * CHARBYTES & 63, len, pos, r, result, p1, p2);
@@ -356,6 +356,4 @@ L(ATR32res):
.p2align 4,, 4
END(memcmp)
-#undef bcmp
-weak_alias (memcmp, bcmp)
libc_hidden_builtin_def (memcmp)
@@ -1,6 +1,7 @@
ifeq ($(subdir),string)
sysdep_routines += strncat-c stpncpy-c strncpy-c \
+ bcmp-sse2 bcmp-sse4 bcmp-avx2 \
strcmp-sse2 strcmp-sse2-unaligned strcmp-ssse3 \
strcmp-sse4_2 strcmp-avx2 \
strncmp-sse2 strncmp-ssse3 strncmp-sse4_2 strncmp-avx2 \
@@ -40,6 +41,7 @@ sysdep_routines += strncat-c stpncpy-c strncpy-c \
memset-sse2-unaligned-erms \
memset-avx2-unaligned-erms \
memset-avx512-unaligned-erms \
+ bcmp-avx2-rtm \
memchr-avx2-rtm \
memcmp-avx2-movbe-rtm \
memmove-avx-unaligned-erms-rtm \
@@ -59,6 +61,7 @@ sysdep_routines += strncat-c stpncpy-c strncpy-c \
strncpy-avx2-rtm \
strnlen-avx2-rtm \
strrchr-avx2-rtm \
+ bcmp-evex \
memchr-evex \
memcmp-evex-movbe \
memmove-evex-unaligned-erms \
new file mode 100644
@@ -0,0 +1,12 @@
+#ifndef MEMCMP
+# define MEMCMP __bcmp_avx2_rtm
+#endif
+
+#define ZERO_UPPER_VEC_REGISTERS_RETURN \
+ ZERO_UPPER_VEC_REGISTERS_RETURN_XTEST
+
+#define VZEROUPPER_RETURN jmp L(return_vzeroupper)
+
+#define SECTION(p) p##.avx.rtm
+
+#include "bcmp-avx2.S"
new file mode 100644
@@ -0,0 +1,23 @@
+/* bcmp optimized with AVX2.
+ Copyright (C) 2017-2021 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <https://www.gnu.org/licenses/>. */
+
+#ifndef MEMCMP
+# define MEMCMP __bcmp_avx2
+#endif
+
+#include "bcmp-avx2.S"
new file mode 100644
@@ -0,0 +1,23 @@
+/* bcmp optimized with EVEX.
+ Copyright (C) 2017-2021 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <https://www.gnu.org/licenses/>. */
+
+#ifndef MEMCMP
+# define MEMCMP __bcmp_evex
+#endif
+
+#include "memcmp-evex-movbe.S"
new file mode 100644
@@ -0,0 +1,23 @@
+/* bcmp optimized with SSE2
+ Copyright (C) 2017-2021 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <https://www.gnu.org/licenses/>. */
+
+# ifndef memcmp
+# define memcmp __bcmp_sse2
+# endif
+# define USE_AS_BCMP 1
+#include "memcmp-sse2.S"
new file mode 100644
@@ -0,0 +1,23 @@
+/* bcmp optimized with SSE4.1
+ Copyright (C) 2017-2021 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <https://www.gnu.org/licenses/>. */
+
+# ifndef MEMCMP
+# define MEMCMP __bcmp_sse4_1
+# endif
+# define USE_AS_BCMP 1
+#include "memcmp-sse4.S"
new file mode 100644
@@ -0,0 +1,35 @@
+/* Multiple versions of bcmp.
+ All versions must be listed in ifunc-impl-list.c.
+ Copyright (C) 2017-2021 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <https://www.gnu.org/licenses/>. */
+
+/* Define multiple versions only for the definition in libc. */
+#if IS_IN (libc)
+# define bcmp __redirect_bcmp
+# include <string.h>
+# undef bcmp
+
+# define SYMBOL_NAME bcmp
+# include "ifunc-bcmp.h"
+
+libc_ifunc_redirected (__redirect_bcmp, bcmp, IFUNC_SELECTOR ());
+
+# ifdef SHARED
+__hidden_ver1 (bcmp, __GI_bcmp, __redirect_bcmp)
+ __attribute__ ((visibility ("hidden"))) __attribute_copy__ (bcmp);
+# endif
+#endif
new file mode 100644
@@ -0,0 +1,53 @@
+/* Common definition for bcmp ifunc selections.
+ All versions must be listed in ifunc-impl-list.c.
+ Copyright (C) 2017-2021 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <https://www.gnu.org/licenses/>. */
+
+# include <init-arch.h>
+
+extern __typeof (REDIRECT_NAME) OPTIMIZE (sse2) attribute_hidden;
+extern __typeof (REDIRECT_NAME) OPTIMIZE (sse4_1) attribute_hidden;
+extern __typeof (REDIRECT_NAME) OPTIMIZE (avx2) attribute_hidden;
+extern __typeof (REDIRECT_NAME) OPTIMIZE (avx2_rtm) attribute_hidden;
+extern __typeof (REDIRECT_NAME) OPTIMIZE (evex) attribute_hidden;
+
+static inline void *
+IFUNC_SELECTOR (void)
+{
+ const struct cpu_features* cpu_features = __get_cpu_features ();
+
+ if (CPU_FEATURE_USABLE_P (cpu_features, AVX2)
+ && CPU_FEATURE_USABLE_P (cpu_features, BMI2)
+ && CPU_FEATURE_USABLE_P (cpu_features, MOVBE)
+ && CPU_FEATURES_ARCH_P (cpu_features, AVX_Fast_Unaligned_Load))
+ {
+ if (CPU_FEATURE_USABLE_P (cpu_features, AVX512VL)
+ && CPU_FEATURE_USABLE_P (cpu_features, AVX512BW))
+ return OPTIMIZE (evex);
+
+ if (CPU_FEATURE_USABLE_P (cpu_features, RTM))
+ return OPTIMIZE (avx2_rtm);
+
+ if (!CPU_FEATURES_ARCH_P (cpu_features, Prefer_No_VZEROUPPER))
+ return OPTIMIZE (avx2);
+ }
+
+ if (CPU_FEATURE_USABLE_P (cpu_features, SSE4_1))
+ return OPTIMIZE (sse4_1);
+
+ return OPTIMIZE (sse2);
+}
@@ -38,6 +38,29 @@ __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
size_t i = 0;
+ /* Support sysdeps/x86_64/multiarch/bcmp.c. */
+ IFUNC_IMPL (i, name, bcmp,
+ IFUNC_IMPL_ADD (array, i, bcmp,
+ (CPU_FEATURE_USABLE (AVX2)
+ && CPU_FEATURE_USABLE (MOVBE)
+ && CPU_FEATURE_USABLE (BMI2)),
+ __bcmp_avx2)
+ IFUNC_IMPL_ADD (array, i, bcmp,
+ (CPU_FEATURE_USABLE (AVX2)
+ && CPU_FEATURE_USABLE (BMI2)
+ && CPU_FEATURE_USABLE (MOVBE)
+ && CPU_FEATURE_USABLE (RTM)),
+ __bcmp_avx2_rtm)
+ IFUNC_IMPL_ADD (array, i, bcmp,
+ (CPU_FEATURE_USABLE (AVX512VL)
+ && CPU_FEATURE_USABLE (AVX512BW)
+ && CPU_FEATURE_USABLE (MOVBE)
+ && CPU_FEATURE_USABLE (BMI2)),
+ __bcmp_evex)
+ IFUNC_IMPL_ADD (array, i, bcmp, CPU_FEATURE_USABLE (SSE4_1),
+ __bcmp_sse4_1)
+ IFUNC_IMPL_ADD (array, i, bcmp, 1, __bcmp_sse2))
+
/* Support sysdeps/x86_64/multiarch/memchr.c. */
IFUNC_IMPL (i, name, memchr,
IFUNC_IMPL_ADD (array, i, memchr,
@@ -17,7 +17,9 @@
<https://www.gnu.org/licenses/>. */
#if IS_IN (libc)
-# define memcmp __memcmp_sse2
+# ifndef memcmp
+# define memcmp __memcmp_sse2
+# endif
# ifdef SHARED
# undef libc_hidden_builtin_def
@@ -27,8 +27,6 @@
# include "ifunc-memcmp.h"
libc_ifunc_redirected (__redirect_memcmp, memcmp, IFUNC_SELECTOR ());
-# undef bcmp
-weak_alias (memcmp, bcmp)
# ifdef SHARED
__hidden_ver1 (memcmp, __GI_memcmp, __redirect_memcmp)